請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/15655
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 吳乃立 | |
dc.contributor.author | Yu-Ting Weng | en |
dc.contributor.author | 翁郁婷 | zh_TW |
dc.date.accessioned | 2021-06-07T17:49:30Z | - |
dc.date.copyright | 2013-02-16 | |
dc.date.issued | 2013 | |
dc.date.submitted | 2013-01-31 | |
dc.identifier.citation | 1. M. A. V. Devanathan and B. V. K. S. R. A. Tilak, ‘The structure of the electrical double layer at the metal-solution interface’, Chemical Reviews, 65, 635-684 (1965).
2. D. C. Grahame, ‘The electrical double layer and the theory of electrocapillarity’, Chemical Reviews, 41, 441-501 (1947). 3. A. Burke, “Ultracapacitors: why, how, and where is the technology”, Journal of Power Sources, 91, 37-50 (2000). 4. A. J. Bard and L. R. Faulkner, Electrochemical methods: fundamentals and applications, 2nd ed., Wiley, New York (2001). 5. B. E. Conway, Electrochemical supercapacitors: scientific fundamentals and technological applications, Kluwer Academic Publishers/ Plenum Press, New York (1999). 6. M. S. Wu and P. C. J. Chiang, “Fabrication of nanostructured manganese oxide electrodes for electrochemical capacitors”, Electrochemical and Solid State Letters, 7, A123-A126 (2004). 7. W. Sugimoto, H. Iwata, Y. Murakami and Y. Takasu, ”Electrochemical capacitor behavior of layered ruthenic acid hydrate”, Journal of The Electrochemical Society, 151, A1181-A1187 (2004). 8. X. Dong, W. Shen, J. Gu, L. Xiong, Y. Zhu, H. Li and J. Shi, “MnO2-embedded-in-mesoporous-carbon-wall structure for use as electrochemical capacitors”, Journal of Physical Chemistry B, 110, 6015-6019 (2006). 9. D. Choi, Synthesis, Structure and electrochemical characterization of transition metal nitride supercapacitors derived by a two-step transition metal halide approach, Ph.D. thesis, Carnegie Mellon University, Pittsburgh (2005). 10. G. Lota, T.A. Centeno, E. Frackowiak and F. Stoeckli, “Improvement of the structural and chemical properties of a commercial activated carbon for its application in electrochemical capacitors”, Electrochimica Acta, 53, 2210-2216 (2008). 11 P. Simon and Y. Gogotsi, “Materials for electrochemical capacitors”, Nature Materials, 7, 845-854 (2008). 12. O. Erdinc, B. Vural, M. Uzunoglu and Y. Ates, 'Modeling and analysis of an FC/UC hybrid vehicular power system using a wavelet-fuzzy logic based load sharing and control algorithm', International Journal of Hydrogen Energy, 34, 5223-5233 (2009). 13. G.J. Suppes, 'Plug-in hybrid with fuel cell battery charger', International Journal of Hydrogen Energy, 30, 113-121 (2005). 14. A.G. Pandolfo and A.F. Hollenkamp, “Carbon properties and their role in supercapacitors”, Journal of Power Sources, 157, 11-27 (2006). 15. R. Carter and A. Cruden, 'Strategies for control of a battery/supercapacitor system in an electric vehicle', IEEE International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 1-3, 727-732, (2008). 16. W. Lhomme, P. Delarue, P. Barrade, A. Bouscayrol and A. Rufer, 'Design and control of a supercapacitor storage system for traction applications', Conference Record of the 2005 IEEE Industry Applications Conference, 1-4, 2013-2020 (2005). 17. . M. Kim and S. K. Sul, 'Control of rubber tyred gantry crane with energy storage based on supercapacitor bank', IEEE Transactions on Power Electronics, 21, 1420-1427 (2006). 18. I. Galkin, A. Stepanov and J. Laugis, 'Outlook of usage of supercapacitors in uninterruptible power supplies', International Baltic Electronics Conference, 237–240 (2006) 19. M. Miller and M. Everett, 'An assessment of ultra-capacitors as the power cache in Toyota THS-II, GM-Allision AHS-2 and Ford FHS hybrid propulsion systems', Power Electronics in Transportation, 19-26 (2004). 20. Z. Wei, S. Wang and Z. P. Qi, International Conference on Electrical Machines and Systems, 1-4, 1524–1527 (2007). 21. K. T. Nam, D. W. Kim, P. J. Yoo, C. Y. Chiang, N. Meethong, P. T. Hammond, Y. M. Chiang, A. M. Belcher, 'Virus-enabled synthesis and assembly of nanowires for lithium ion battery electrodes', Science, 312, 885-887 (2006). 22. H. Nishide and K. Oyaizu, “Materials science toward flexible batteries”, Science, 319, 737-739 (2008). 23. J. A. Rogers, T. Someya and Y. G. Huang, “Materials and mechanics for stretchable electronics”, Science, 327, 1603-1606 (2010). 24. K. Gurunathan, A. V. Murugan, R. Marimuthu, U. P. Mulik and D. P. Amalnerkar, “Electrochemically synthesised conducting polymeric materials for applications towards technology in electronics, optoelectronics and energy storage devices”, Materials Chemistry and Physics, 61, 173-191 (1999). 25. G. A. Snook, P. Kao and A. S. Best, “Conducting-polymer-based supercapacitor devices and electrodes”, Journal of Power Sources, 196, 1-12 (2011). 26. H. E. Katz, P. C. Searson and T. O. Poehler, “Batteries and charge storage devices based on electronically conducting polymers”, Journal of Materials Research, 25, 1561-1574 (2010). 27. J. H. Kim, Y.-S. Lee, A. K. Sharma and C. G. Liu, “Polypyrrole/carbon composite electrode for high-power electrochemical capacitors”, Electrochimica Acta, 52, 1727-1732 (2006). 28. A. Laforgue and L. Robitaille, “Deposition of ultrathin coatings of polypyrrole and poly(3,4-ethylenedioxythiophene) onto electrospun nanofibers using a vapor-phase polymerization method”, Chemistry of Materials, 22, 2474-2480 (2010). 29. L. Z. Fan, Y. S. Hu, J. Maier, P. Adelhelm, B. Smarsly, M. Antonietti, “High electroactivity of polyaniline in supercapacitors by using a hierarchically porous carbon monolith as a support”, Advanced Functional Materials, 17, 3083-3087 (2007). 30. L. L. Zhang, S. Li, J. Zhang, P. Guo, J. Zheng, X. S. Zhao, “Enhancement of electrochemical performance of macroporous carbon by surface coating of polyaniline”, Chemistry of Materials, 22, 1195-1202 (2010). 31. K. Lota, V. Khomenko and E. Frackowiak, “Capacitance properties of poly(3,4-ethylenedioxythiophene)/carbon nanotubes composites”, Journal of Physics and Chemistry of Solids, 65, 295-301 (2004). 32. S. Suematsu, Y. Oura, H. Tsujimoto, H. Kanno and K. Naoi, “Conducting polymer films of cross-linked structure and their QCM analysis”, Electrochimica Acta, 45, 3813-3821 (2000). 33. S. R. Sivakkumar and R. Saraswathi “Performance evaluation of poly(N-methylaniline) and polyisothianaphthene in charge-storage devices”, Journal of Power Sources, 137, 322-328 (2004). 34. A. Du Pasquier, A. Laforgue, P. Simon, G.G. Amatucci and J.F. Fauvarque, “A nonaqueous asymmetric hybrid Li4Ti5O12 / poly(fluorophenylthiophene) energy storage device”, Journal of The Electrochemical Society, 149, A302-A307 (2002). 35. A. Rudge, I. Raistrick, S. Gottesfeld and J.P. Ferraris, “A study of the electrochemical properties of conducting polymers for application in electrochemical capacitors”, Electrochimica Acta, 39, 273-287 (1994). 36. K. S. Ryu, K. M. Kim, N. G. Park, Y. J. Park and S. H. Chang, “Symmetric redox supercapacitor with conducting polyaniline electrodes”, Journal of Power Sources, 103, 305-309 (2002). 37. M. Mastragostino, C. Arbizzani and F. Soavi, “Conducting polymers as electrode materials in supercapacitors”, Solid State Ionics, 148, 493-502 (2002). 38. T. Nohma, H. Kurokawa, M. Uehara, M. Takahashi, K. Nishio and T. Saito, “Electrochemical characteristics of LiNiO2 and LiCoO2 as a positive material for lithium secondary batteries”, Journal of Power Sources, 54, 552-524 (1995). 39. Z. S. Peng, C. R. Wan and C. Y. Jiang, “Synthesis by sol-gel process and characterization of LiCoO2 cathode materials”, Journal of Power Sources, 72, 215-220 (1996). 40. H. Talbi, P.E. Just and L.H. Dao, “Electropolymerization of aniline on carbonized polyacrylonitrile aerogel electrodes: applications for supercapacitors”, Journal of Applied Electrochemistry, 33, 465-473 (2003). 41. A. Laforgue, P. Simon, J.F. Fauvarque, M. Mastragostino, F. Soavi, J.F. Sarrau, P. Lailler, M. Conte, E. Rossi and S. Saguatti, “Activated carbon/conducting polymer hybrid supercapacitors”, Journal of the Electrochemical Society, 150, A645-A651 (2003). 42. A. G. Pandolfo and A. F. Hollenkamp, “Carbon properties and their role in supercapacitors”, Journal of Power Sources, 157, 11-27 (2006). 43. J. H. Park and O.O. Park, “Hybrid electrochemical capacitors based on polyaniline and activated carbon electrodes”, Journal of Power Sources, 111, 185-190 (2002). 44. K. Lota, V. Khomenko and E. Frackowiak, “Capacitance properties of poly(3,4-ethylenedioxythiophene)/carbon nanotubes composites”, Journal of Physics and Chemistry of Solids, 65, 295-301 (2004). 45. K. S. Ryu, Y. G. Lee, Y. S. Hong, Y. J. Park, X. L. Wu, K. M. Kim, M. G. Kang, N. G. Park and S. H. Chang, “Poly(ethylenedioxythiophene) (PEDOT) as polymer electrode in redox supercapacitor”, Electrochimica Acta, 50, 843-847 (2004). 46. K. Naoi, S. Suematsu and A. Manago, “Electrochemistry of poly(1,5‐diaminoanthraquinone) and its application in electrochemical capacitor materials”, Journal of the Electrochemical Society, 147, 420-424 (2000). 47. M. Galinski, A. Lewandowski and I. Stepniak, “Ionic liquids as electrolytes”, Electrochimica Acta, 51, 5567-5580 (2006). 48. M. Skompska, J. Mieczkowski, R. Holze and E. Heinze, 'In situ conductance studies of p- and n-doping of poly(3,4- dialkoxythiophenes)', Journal of Electroanalytical Chemistry, 577, 9-17 (2005). 49. M. D. Levi, Y. Gofer, D. Aurbach, M. Lapkowski, E. Vieil and J. Serose, 'Simultaneous voltammetric and in situ conductivity studies of n‐doping of polythiophene films with tetraalkylammonium, alkali, and alkaline–earth cations ', Journal of the Electrochemical Society, 147, 1096-1099 (2000). 50. T. Liu, T. V. Sreekumar, S. Kumar, R. H. Hauge, and R. E. Smalley, “ SWNT/PAN composite film-based supercapacitors”, Carbon, 41, 2440-2442 (2003). 51. Q. Xiao and X. Zhou, “The study of multiwalled carbon nanotube deposited with conducting polymer for supercapacitor”, Electrochimica Acta, 48, 575-580 (2003). 52. L. M. Huang, T. C. Wen and A. Gopalan, “Electrochemical and spectroelectrochemical monitoring of supercapacitance and electrochromic properties of hydrous ruthenium oxide embedded poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) composite”, Electrochmiica Acta, 51, 3469-3476 (2006). 53. M. Mallouki, F. Tran-Van, C. Sarrazin, P. Simon, B. Daffos, A. De, C. Chevrot and J. Fauvarque, “Polypyrrole-Fe2O3 nanohybrid materials for electrochemical storage”, Journal of Solid State Electrochemistry, 11, 396-406 (2007). 54. P. Gomez-Romero, M. Chojak, K. Cuentas-Gallegos, J. A. Asensio, P. J. Kulesza, N. Casan-Pastor and M. Lira-Cantu, 'Hybrid organic-inorganic nanocomposite materials for application in solid state electrochemical supercapacitors', Electrochemistry Communications, 5, 149-153, (2003) 55. P. J. Kulesza, M. Skunik, B. Baranowska, K. Miecznikowski, M. Chojak, K. Karnicka, E. Frackowiak, F. Beguin, A. Kuhn, M. H. Delville, B. Starobrzynska and A. Ernst, “Fabrication of network films of conducting polymer-linked polyoxometallate-stabilized carbon nanostructures”, Electrochimica Acta, 51, 2373-2379 (2006). 56. M. Hughes, G.Z. Chen, M.S.P. Shaffer, D.J. Fray, A.H. Windle, “Controlling the nanostructure of electrochemically grown nanoporous composites of carbon nanotubes and conducting polymers”, Composites Science and Technology, 64, 2325-2331 (2004). 57. I. Boyano, M. Bengoechea, I. de Meatza, O. Miguel, I. Cantero, E. Ochoteco and J. Rodriguez, M. Lira-Cantu and P. Gomez-Romero, “Improvement in the PPy/V2O5 hybrid as a cathode material for Li ion batteries using PSA as an organic additive”, Journal of Power Sources, 166, 471-477 (2007). 58. I. Boyano, M. Bengoechea, I. de Meatza, O. Miguel, I. Cantero, E. Ochoteco, H. Grande, M. Lira-Cantu and P. Gomez-Romero, “Influence of acids in the PPy/V2O5 hybrid synthesis and performance as a cathode material”, Journal of Power Sources, 174, 1206-1211 (2007). 59. J. Wang, C. Y. Wang, C. O. Too and G. G. Wallace, “Highly-flexible fibre battery incorporating polypyrrole cathode and carbon nanotubes anode”, Journal of Power Sources, 161, 1458-1462 (2006). 60. J. H. Sung, S. J. Kim, S. H. Jeong, E. H. Kim and K. H. Lee, “Flexible micro-supercapacitors”, Journal of Power Sources, 162, 1467-1470 (2006). 61. J. Wang, C. O. Too, D. Zhou and G. G. Wallace, “Novel electrode substrates for rechargeable lithium/polypyrrole batteries”, Journal of Power Sources, 140, 162-167 (2005). 62. J. H. Park, J. M. Ko, O. O. Park and D. W. Kim, “Capacitance properties of graphite/polypyrrole composite electrode prepared by chemical polymerization of pyrrole on graphite fiber”, Journal of Power Sources, 105, 20-25 (2002). 63. T. V. Vernitskaya and O. N. Efimov, “Polypyrrole: a conducting polymer; its synthesis, properties and applications”, Russian Chemical Reviews, 66, 443-457 (1997). 64. J. Heinze, B. A. Frontana-Uribe and S. Ludwigs, “Electrochemistry of conducting polymers-persistent models and new concepts”, Chemical Reviews, 110, 4724– 4771 (2010). 65. K. Naoi, Y. Oura and H. Tsujimoto, Proceedings of the symposium on electrochemical capacitors Ii, Electrochemical Society Inc, Pennington, 120-126 (1997). 66. G. A. Snook, C. Peng, D. J. Fray and G. Z. Chen, “Achieving high electrode specific capacitance with materials of low mass specific capacitance: Potentiostatically grown thick micro-nanoporous PEDOT films”, Electrochemistry Communications, 9, 83-88 (2007). 67. S. Suematsu, Y. Oura, H. Tsujimoto, H. Kanno and K. Naoi, “Conducting polymer films of cross-linked structure and their QCM analysis”, Electrochimica Acta, 45, 3813-3821 (2000). 68. V. Khomenko, E. Frackowiak and F. Beguin, “Determination of the specific capacitance of conducting polymer/nanotubes composite electrodes using different cell configurations”, Electrochimica Acta, 50, 2499-2506 (2005). 69. J. Jang, J. Bae, M. Choi and S. H. Yoon, “Fabrication and characterization of polyaniline coated carbon nanofiber for supercapacitor”, Carbon, 43, 2730-2736 (2005). 70. J. Zhang, D. Shan and S. L. Mu, 'A rechargeable Zn- poly(aniline-co-m-aminophenol) battery', Journal of Power Sources, 161, 685-691 (2006). 71. M. Q. Wu, G. A. Snook, V. Gupta, M. Shaffer, D. J. Fray and G. Z. Chen, “Electrochemical fabrication and capacitance of composite films of carbon nanotubes and polyaniline”, Journal of Materials Chemistry, 15, 2297-2303 (2005). 72. H. Karami, M. F. Mousavi and M. Shamsipur, “A new design for dry polyaniline rechargeable batteries”, Journal of Power Sources, 117, 255-259 (2003). 73. K. S. Ryu, K. M. Kim, N. G. Park, Y. J. Park and S. H. Chang, “Symmetric redox supercapacitor with conducting polyaniline electrodes”, Journal of Power Sources, 103, 305-309 (2002). 74. S. R. Sivakkumar and R. Saraswathi, “Performance evaluation of poly(N-methylaniline) and polyisothianaphthene in charge-storage devices”, Journal of Power Sources, 137, 322-328 (2004). 75. K. S. Ryu, K. M. Kim, Y. J. Park, N. G. Park, M. G. Kang and S. H. Chang, “Redox supercapacitor using polyaniline doped with Li salt as electrode”, Solid State Ionics, 152, 861-866 (2002). 76. D. Villers, D. Jobin, C. Soucy, D. Cossement, R. Chahine, L. Breau, D. Belanger, 'The influence of the range of electroactivity and capacitance of conducting polymers on the performance of carbon conducting polymer hybrid supercapacitor ', Journal of the Electrochemical Society, 150, A747-A751 (2003). 77. C. Arbizzani, M. Catellani, M. Mastragostino, C. Mingazzini, ' N- and P-doped Polydithieno[3,4-B:3′,4′-D] thiophene: a narrow band gap polymer for redox supercapacitors', Electrochimica Acta, 40, 1871-1876 (1995). 78. C. Arbizzani, M. Mastragostino, L. Meneghello, 'Characterization by impedance spectroscopy of a polymer-based supercapacitor', Electrochimica Acta, 40, 13-14 (1995). 79. G. A. Snook and G. Z. Chen, ' The measurement of specific capacitances of conducting polymers using the quartz crystal microbalance, Journal of Electroanalytical Chemistry, 612, 140-146 (2008). 80. C. Arbizzani, A. Balducci, M. Mastragostino, M. Rossi and F. Soavi, 'Li1.01Mn1.97O4 surface modification by poly(3,4-ethylenedioxythiophene)', Journal of Power Sources, 119-121, 695-700 (2003). 81. C. Arbizzani, M. Mastragostino and M. Rossi, 'Preparation and electrochemical characterization of a polymer Li1.03Mn1.97O4/pEDOT composite electrode', Electrochemistry Communications, 4, 545-549 (2002). 82. J. P. Ferraris, M. M. Eissa, I. D. Brotherston and D. C. Loveday, 'Performance evaluation of poly 3-(Phenylthiophene) derivatives as active materials for electrochemical capacitor applications', Chemistry of Materials, 10, 3528-3535 (1993). 83. L. J. Her, J. L. Hong and C .C. Chang, 'Preparation and electrochemical characterizations of poly(3,4-dioxyethylenethiophene)/LiCoO2-Ketjenblack composite cathode in lithium-ion battery', Journal of Power Sources, 161, 1247-1253 (2006). 84. A. Lisowska-Oleksiak and A. P. Nowak, 'Metal hexacyanoferrate network synthesized inside polymer matrix for electrochemical capacitors', Journal of Power Sources, 173, 829-836 (2007). 85. J. D. Stenger-Smith, C. K. Webber, N. Anderson, A. P. Chafin, K. K. Zong and J. R. Reynolds, 'Poly(3,4-alkylenedioxythiophene)-based supercapacitors using ionic liquids as supporting electrolytes', Journal of the Electrochemical Society, 149, A973-A976 (2002). 86. J. I. Hong, I. H. Yeo and W. K. Paik, 'Conducting polymer with metal oxide for electrochemical capacitor: poly(3,4-ethylenedioxythiophene) RuOx electrode', Journal of the Electrochemical Society, 148, A156-A162 (2006). 87. S. Ghosh and O. Inganas, 'Networks of electron-conducting polymer in matrices of ion-conducting polymers. Applications to fast electrodes', Electrochemical and Solid-State Letters, 3, 213-215 (2000). 88. A. M. P. Hussain, A. Kumar, F. Singh and D. K. Avasthi, 'Effects of 160 MeV Ni12+ ion irradiation on HCl doped polyaniline electrode', Journal of Physics D: Applied Physics, 39, 750-756 (2006). 89. A. M. P. Hussain, D. Saikia, F. Singh, D. K. Avasthi and A. Kumar, 'Effects of 160 MeV Ni12+ ion irradiation on polypyrrole conducting polymer electrode materials for all polymer redox supercapacitor', Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 240, 834-841 (2005). 90. W. K. Li, J. Chen, J. J. Zhao, J. R. Zhang and J. J. Zhu, 'Application of ultrasonic irradiation in preparing conducting polymer as active materials for supercapacitor', Materials Letters, 59, 800-803 (2005). 91. G. Z. Chen, M. S. P. Shaffer, D. Coleby, G. Dixon, W. Zhou, D. J. Fray and A. H. Windle, 'Carbon nanotube and polypyrrole composites: coating and doping', Advanced Materials, 12, 522-526 (2000). 92. J. H. Chen, Z. P. Huang, D. Z. Wang, S. X. Yang, J. G. Wen and Z. F. Ren, 'Electrochemical synthesis of polypyrrole/carbon nanotube nanoscale composites using well-aligned carbon nanotube arrays', Applied Physics A, 73, 129-131 (2001). 93. J. H. Chen, Z. P. Huang, D. Z. Wang, S. X. Yang, W. Z. Li, J. G. Wen and Z. F. Ren, ' Electrochemical synthesis of polypyrrole films over each of well-aligned carbon nanotubes', Synthetic Metals, 125, 289-294 (2001). 94. J. E. Huang, X. H. Li, J. C. Xu and H. L. Li, 'Well-dispersed single-walled carbon nanotube/polyaniline composite films', Carbon, 41, 2731-2736 (2003). 95. M. Tahhan, V. T. Truong, G. M. Spinks and G. G. Wallace, 'Carbon nanotube and polyaniline composite actuators', Smart Materials and Structures, 12, 626-332 (2003). 96. A. M. Zimera, R. Bertholdoa, M. T. Grassia, A. J. G. Zarbina and L. H. Mascaro, 'Template carbon dispersed in polyaniline matrix electrodes: evaluation and application as electrochemical sensors to low concentrations of Cu2+ and Pb2+', Electrochemistry Communications, 5, 983-988 (2003). 97. E. Frackowiaka and F. Beguin, 'Carbon materials for the electrochemical storage of energy in capacitors', Carbon, 39, 937-950 (2001). 98. K. Jurewiczb, S. Delpeuxa, V. Bertagnaa, F. Beguina and E. Frackowiak, 'Supercapacitors from nanotubes/polypyrrole composites', Chemical Physics Letters, 347, 36-40 (2001). 99. M. Hughes, G. Z. Chen, M. S. P. Shaffer, D. J. Fray and A. H. Windle, ' Electrochemical capacitance of a nanoporous composite of carbon nanotubes and polypyrrole', Chemistry of Materials, 14, 1610-1613 (2002). 100. K. H. An, K. K. Jeon, J. K. Heo, S. C. Lim, D. J. Bae and Y. H. Leez, ' High-capacitance supercapacitor using a nanocomposite electrode of single-walled carbon nanotube and polypyrrole', Journal of the Electrochemical Society, 149, A1058-A1062 (2002). 101. M. Hughes, M. S. P. Shaffer, A. C. Renouf, C. Singh, G. Z. Chen, D. J. Fray and A. H. Windle, 'Electrochemical capacitance of nanocomposite films formed by coating aligned arrays of carbon nanotubes with polypyrrole', Advanced Materials, 14, 382-385 (2002). 102. E. Frackowiaka and F. Beguin, 'Electrochemical storage of energy in carbon nanotubes and nanostructured carbons', Carbon, 40, 1775-1787 (2002). 103. L. M. Huang, T. C. Wen and A. Gopalan, 'Electrochemical and spectroelectrochemical monitoring of supercapacitance and electrochromic properties of hydrous ruthenium oxide embedded poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) composite', Electrochimica Acta, 51, 3469-3476 (2006). 104. P. G. Romero, M. Chojak, K. C. Gallegos, J. A. Asensio, P. J. Kulesza, N. C. Pastor and M. L. Cantu, 'Hybrid organic-inorganic nanocomposite materials for application in solid state electrochemical supercapacitors', Electrochemistry Communications, 5, 149-153 (2003). 105. P. G. Romero, K. C. Gallegos, M. L. Cantu and N. C. Pastor, 'Hybrid nanocomposite materials for energy storage and conversion applications', Journal of Materials Science, 40, 1423-1428 (2005). 106. P. J. Kulesza, M. Skunik, B. Baranowska, K. Miecznikowski, M. Chojak, K. Karnicka, E. Frackowiak, F. Beguin, A. Kuhn, M. H. Delville, B. Starobrzynska and A. Ernst, 'Fabrication of network films of conducting polymer-linked polyoxometallate-stabilized carbon nanostructures', Electrochimica Acta, 51, 2373-2379 (2006). 107. B.E. Conway, 'Transition from “Supercapacitor” to “Battery” behavior in electrochemical energy storage', Journal of the Electrochemical Society, 138, 1539-1548 (1991). 108. Y. Zhang, H. Feng, X. Wu, L. Wang, A. Zhang, T. Xia, H. Dong, X. Li and L. Zhang, 'Progress of electrochemical capacitor electrode materials: A review', International Journal of Hydrogen Energy, 34, 4889-4899 (2009). 109. C. Peng, S. Zhang, D. Jewell, and G. Z. Chen, 'Carbon nanotube and conducting polymer composites for supercapacitors', Progress in Natural Science, 18, 777-788 (2008). 110. J. H. Park, J. M. Ko, O. O. Park, and D. W. Kim, “Capacitance properties of graphite/polypyrrole composite electrode prepared by chemical polymerization of pyrrole on graphite fiber”, Journal of Power Sources, 105, 20-25 (2002). 111. R. K. Sharma, A. C. Rastogi and S. B. Desu, “Pulse polymerized polypyrrole electrodes for high energy density electrochemical supercapacitor”, Electrochemistry Communications, 10, 268-272 (2008). 112. T. Raudsepp, M. Marandi, T. Tamm, V. Sammelselg and J. Tamm, “Study of the factors determining the mobility of ions in the polypyrrole films doped with aromatic sulfonate anions“, Electrochimica Acta, 53, 3828-3835 (2008). 113. J. S. Lin, 'Effect of polypyrrole deposition of carbon fiber on the thermal expansion of carbon fiber-epoxy composites', Journal of Polymer Research, 6, 237-242 (1999). 114. H. Holleck, 'Advanced layer material constitution', Thin Solid Films, 153, 11-17 (1987). 115. X. S. Wang, H. P. Tang, X. D. Li and X. Hua, 'Investigations on the mechanical properties of conducting polymer coating-substrate structures and their influencing factors', International Journal of Molecular Sciences, 10, 5257-5284 (2009). 116. M. C. Smart, B. V. Ratnakumar and S. Surampudi, “Lithium batteries for aerospace applications: 2003 Mars Exploration Rover”, Journal of Power Sources, 119-121, 906-910 (2003). 117. T. Morimoto, K. Hiratsuka, Y. Sanada and K. Kurihara, “Electric double-layer capacitor using organic electrolyte”, Journal of Power Sources, 60, 239-247 (1996). 118. P. J. Hall, M. Mirzaeian, S. I. Fletcher, F. B. Sillars, A. J. R. Rennie, G. O. Shitta-Bey, G. Wilson, A. Cruden and R. Carter, “Energy storage in electrochemical capacitors: designing functional materials to improve performance”, Energy & Environmental Science, 3, 1238-1251 (2010). 119. K. Hung, C. Masarapu, T. Ko and B. Wei, “Wide-temperature range operation supercapacitors from nanostructured activated carbon fabric”, Journal of Power Sources, 193, 944-949 (2009). 120. E. J. Brandon, W. C. West, M. C. Smart, L. D. Whitcanack and G. A. Plett, “Extending the low temperature operational limit of double-layer capacitors”, Journal of Power Sources, 170, 225-232 (2007). 121. P. Liu, M. Verbrugge and S. Soukiazian, “Influence of temperature and electrolyte on the performance of activated-carbon supercapacitors”, Journal of Power Sources, 156, 712-718 (2006). 122. J. Rodriguez, H. J. Grande and T. F. Otero, Handbook of organic conductive molecules and polymers, H. S. Salwa, Ed.; Wiley, New York (1997). 123. O. Niwa and T. Tamamura, “Electrochemical polymerization of pyrrole on polymer-coated electrodes”, Journal of the Chemical Society, Chemical Communications, 470, 817-818 (1984). 124. T. F. Otero and J. M. Sansinena, “Influence of synthesis conditions on polypyrrole-poly(styrenesulphonate) composite electroactivity”, Journal of Electroanalytical Chemistry, 412, 109-116 (1996). 125. H. L. Wang, L. Toppare and J. E. Fernandez, “Conducting polymer blends: polythiophene and polypyrrole blends with polystyrene and poly(bisphenol A carbonate)”, Macromolecules, 23, 1053-1059 (1990). 126. J. C. LaCroix and A. F. Diaz, “Electrooxidation of aromatics to polymer films”, Makromolekulare Chemie. Macromolecular Symposia, 8, 17-37 (1987). 127. J. O. Iroh and K. Levine, “Electrochemical synthesis of polypyrrole/polyimide conducting composite using a polyamic acid precursor”, European Polymer Journal, 38, 1547-1550 (2002). 128. R. Gangopadhyay and A. De, “Conducting polymer composites: novel materials for gas sensing”, Sensors and Actuators B: Chemical, 77, 326-329 (2001). 129. G. B. Streeta, S. E. Lindseya, A. I. Nazzala and K. J. Wynnea, “The structure and mechanical properties of polypyrrole”, Molecular Crystals and Liquid Crystals, 118, 137-148 (1985). 130. S. E. Lindsey and G. B. Street, “Conductive composites from polyvinyl alcohol and polypyrrole”, Synthetic Metals, 10, 67-69 (1984). 131. C. W. Lin, B. J. Hwang and C. R. Lee, “Sensing behaviors of the electrochemically co-deposited polypyrrole–poly(vinyl alcohol) thin film exposed to ammonia gas”, Materials Chemistry and Physics, 58, 114-120 (1999). 132. H. L. Wang and J. E. Fernandez, “Blends of polypyrrole and poly(vinyl alcohol)”, Macromolecules, 26, 3336-3339 (1993). 133. M. E Nicho and H. Hu, “Fourier transform infrared spectroscopy studies of polypyrrole composite coatings”, Solar Energy Materials and Solar Cells, 63, 423-435 (2000). 134. H. N. M. E. Mahmud, A. Kassim, Z. Zaina and W. M. M. Yunus, “Fourier transform infrared study of polypyrrole–poly(vinyl alcohol) conducting polymer composite films: Evidence of film formation and characterization”, Journal of Applied Polymer Science, 100, 4107-4113 (2006). 135. H. Chen, M. Armand, M. Courty, M. Jiang, C. P. Grey, F. Dolhem, J. M Tarascon and P. Poizot, 'Lithium salt of tetrahydroxybenzoquinone: toward the development of a sustainable Li-ion battery', Journal of the American Chemical Society, 131, 8984-8988 (2009). 136. Y. Zhang, H. Feng, X. Wu, L. Wang, A. Zhang, T. Xia, H. Dong, X. Li and L. Zhang, 'Progress of electrochemical capacitor electrode materials: A review', International Journal of Hydrogen Energy, 34, 4889-4899 (2009). 137. L. M. Huang, H. Z. Lin, T. C. Wen and A. Gopalan, “Highly dispersed hydrous ruthenium oxide in poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonic acid) for supercapacitor electrode”, Electrochemical and Solid-State Letters, 1, 1-3 (1998). 138. Y. R. Lin and H. Teng, “A novel method for carbon modification with minute polyaniline deposition to enhance the capacitance of porous carbon electrodes”, Carbon, 41, 2865-2871 (2003). 139. C. J. Brabec, C. Winder, N. S. Sariciftci, J. C. Hummelen, A. Dhanabalan, P. A. Hal and R. A. J. Janssen, “A low-bandgap semiconducting polymer for photovoltaic devices and infrared emitting diodes”, Advanced Functional Materials, 12, 709-714 (2002). 140. J. Ouyang, C. W. Chu, F. C. Chen, Q. Xu and Y. Yang, “High-conductivity poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) film and its application in polymer optoelectronic devices”, Advanced Functional Materials, 15, 203-208 (2005). 141. S. Ghosh and O. Inganas, 'Conducting polymer hydrogels as 3D electrodes: applications for supercapacitors', Advanced Materials, 11, 1214-1218 (1999). 142. F. J. Liu, ' Electrodeposition of manganese dioxide in three-dimensional poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonic acid)–polyaniline for supercapacitor ', Journal of Power Sources, 182, 383-388 (2008). 143. H. K. Jeong, Y. P. Lee, R. J. W. E. Lahaye, M. H. Park, K. H. An, I. J. Kim, C. W. Yang, C. Y. Park, R. S. Ruoff and Y. H. Lee, “Evidence of graphitic AB stacking order of graphite oxides”, Journal of the American Chemical Society, 130, 1362-1366 (2008). 144. P. Liu, K. Gong, P. Xiao and M. Xiao, “Preparation and characterization of poly (vinyl acetate)-intercalated graphite oxide nanocomposite”, Journal of Materials Chemistry, 10, 933-939 (2000). 145. G. I. Titelman, V. Gelman, S. Bron, R. L. Khalfin, Y. Cohen and H. Bianco-Peled, “Characteristics and microstructure of aqueous colloidal dispersions of graphite oxide”, Carbon, 43, 641-649 (2005). 146. Q. Wu, Y. Xu, Z. Yao, A. Liu and G. Shi, “Supercapacitors based on flexible graphene/polyaniline nanofiber composite films”, ACS Nano, 4, 1963-1970 (2010). 147. S. Bose, N. H. Kim, T. Kuila, K. T. Lau and J. H. Lee, “Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode”, Nanotechnology, 22, 295202-295211 (2011). 148. J. Yan, T. Wei, B. Shao, Z. Fan, W. Qian, M. Zhang and F. Wei, “Preparation of a graphene nanosheet/polyaniline composite with high specific capacitance”, Carbon, 48, 487-493 (2010). 149. J. Yan, T. Wei, Z. Fan, W. Qian, M. Zhang, X. Shen and F. Wei, “Preparation of graphene nanosheet/carbon nanotube/polyaniline composite as electrode material for supercapacitors”, Journal of Power Sources, 195, 3041-3045 (2010). 150. P. L. Tabern, P. Simon and J. F. Fauvarque, 'Electrochemical characteristics and impedance spectroscopy studies of carbon-carbon supercapacitors', Journal of the Electrochemical Society, 150, A292-A300 (2003). 151. J-M. Atebamba, J. Moskon, S. Pejovnik and M. Gabersceka, “On the interpretation of measured impedance spectra of insertion cathodes for Lithium-ion batteries”, Journal of the Electrochemical Society, 157, A1218-A1228 (2010). 152. Y. Kou, Y. Xu, Z. Guo and D. Jiang, “Supercapacitive energy storage and electric power supply using an Aza-Fused π-conjugated microporous framework”, Angewandte Chemie International Edition, 50, 8753-8757 (2011). 153. J. H. Jang, A. Kato, K. Machida and K. Naoi, “Supercapacitor performance of hydrous ruthenium oxide electrodes prepared by electrophoretic deposition”, Journal of the Electrochemical Society, 153, A321-A328 (2006). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/15655 | - |
dc.description.abstract | 本論文的研究著重於合成新型高性能以導電高分子為基礎的超級電容器。鑑於超級電容器的在電動車輛與再生能源儲存的潛在應用中,此研究很大一部分重點在於探討導電高分子為基礎的超級電容器在室溫以外,廣泛不同溫度範圍下的各項操作性能。首先,摻雜有對甲苯磺酸之聚吡咯(PPy)膜(17.7%重量百分比)的聚吡咯塗層塗佈於活性炭(AC)電極預成型體。雖然比電容的電極增加為兩倍,從176 F/克增至352 F /克,電容10,000次循環後,在40℃時失去了近60%,而相比之下,在25℃下20%的損失。我們發現,通過嵌入導電的碳化鈦(TiC)納米粒子內的聚吡咯層通過共同電鍍,有效緩解在高溫下的加速衰落的問題,並且在動力性能上有顯著(高達70%)的改善。加入1.7%(重量比)TiC的複合電極,在相同的循環條件下(40℃,10,000個週期)電容保留它的初始電容的92%。增強的高溫循環穩定性已部分被歸因TiC奈米粒子有效的減少導電性聚合物層和AC基板之間的熱膨脹係數的不匹配程度。
接著,則是將高導電性的TiC奈米粒子加入PPy/ 聚乙烯醇(PVA)雙聚合物複合而形成的特定的“核 - 殼”奈米結構的TiC@PPy/PVA複合材料。通過利用界面聚合成殼聚合物於TiC的表面上。這種奈米複合材料在很寬的工作溫度範圍,從-18到60°C,具有高功率性能和長期穩定的循環壽命。該等優異的性能歸因於PVA誘導增強的PP的機械性能,並且利用TiC核心奈米粒子降低複合材料中的阻抗所致。 最後,一新型超級電容器的複合電極含有(81重量%)聚(3,4 - 乙烯二氧噻吩):聚苯乙烯磺酸(PEDOT-PSS)的導電性聚合物(CP)和氧化石墨(GO,16%(重量比))和碳奈米管(CNT; 3%(重量比))經由溶液鑄成法製備完成。這些碳的添加劑,具有不同的維度,其彼此的堆疊提供了一個獨特的骨骼結構,一方面能有效提升活物與電解液界面接觸面積,進而提升比電容量,並提供了快速離子與電子導電通道,達到高功率性能增強。與純CP電極相比較,該三元電極增加近10倍的能源和動力性能。它具有比電容365的F /克電極與超過2.0 V的操作電位窗口,並在近200千瓦/千克的功率下,顯示出大於100瓦時/千克的比能量。電極具有良好的循環穩定性的電源電極。有鑑於合成方法的簡易性與出色的動力性能,我們認為本發明的PEDOT-PSSCP-C複合活性材料是具有大型超級電容器應用的極具潛力。 | zh_TW |
dc.description.abstract | This thesis focuses on the synthesis of novel high-performance supercapacitors based on conducting polymer (CP). In view of potential applications of supercapacitors for electric vehicle and stand-alone renewable energy storage under severe temperatures, much attention has been placed on different performance aspects of the CP-based supercapacitors over widely different temperature ranges other than the room temperature. First, Polypyrrole (PPy) film, doped with p-toluenesulfonate, has been coated onto activated carbon (AC) electrode preform. Although the specific capacitance of the electrode is doubled, from 176 F/g to 352 F/g, with coating of 17.7 wt.% PPy, the capacitance lost nearly 60% after 10,000 cycles at 40 oC, in contrast to 20% loss at 25 oC. It is demonstrated that the problem of accelerated fading at high temperature is effectively alleviated, in conjunction with significant (up to 50%) improvement in power performance, by embedding conductive TiC nanoparticles within the PPy layer via co-electroplating. With addition of 1.7 wt.% of TiC in the composite electrode, the capacitance retain 92% of its initial capacitance under the same cycling conditions (40 oC, 10,000 cycles). The enhanced high-temperature cycling stability has in part been attributed to the reduction in the mismatch of thermal expansion coefficient between the conducting polymer layer and the AC substrate.
High conductivity inorganic nanoparticle, TiC, is introduced into PPy/polyvinyl alcohol (PVA) bi-polymers composite to form the particular “core−shell” nanostructurized TiC@PPy/PVA composite by utilizing interfacial polymerization of the shell−forming polymers on the surface of TiC. This nanocomposite possesses high rate performance and stable long term cycle life over a wide operating temperature ranges from −18 to 60 °C. This is attributed to PVA induced enhancement of the mechanical properties of PPy and the aligned nanostructure of PPy/PVA bi-polymers on the surfaces of TiC core nanoparticles, resulting in the reduced resistance of PPy/PVA nanocomposites. Finally, supercapacitor composite electrode containing predominantly (81 wt.%) Poly(3,4-ethylene-dioxythiophene):Polystyrenesulfonate (PEDOT-PSS) conducting polymer (CP) and graphite oxide (GO; 16 wt.%) and carbon nanotube (CNT; 3 wt.%) has been prepared by a solution casting method. The stacking between these carbon additives having very different dimensionality provides a unique skeletal structure that allows for enlarged polymer/electrolyte interface for high-capacitance and for enhanced electronic and ionic conductivities needed for high-power performance. The resulting ternary electrode exhibits nearly ten-fold increase in energy and power performance as compared with pure CP electrode. It possesses a specific capacitance of 365 F/g-electrode over an operating potential window of 2.0 V, and exhibits a specific energy greater than 100 Wh/kg-electrode at the power of nearly 200 kW/kg-electrode with good cycle stability. Given the processing simplicity and outstanding power performance, the present PEDOT-PSSCP-C composite active material is considered possessing great potential for large-scale supercapacitor applications. | en |
dc.description.provenance | Made available in DSpace on 2021-06-07T17:49:30Z (GMT). No. of bitstreams: 1 ntu-102-D96524013-1.pdf: 4882946 bytes, checksum: 1124be56d949ff34d7b329a5c971fd0d (MD5) Previous issue date: 2013 | en |
dc.description.tableofcontents | Abstract I
Table of Contents V List of Tables VIII List of Figures IX Chapter 1 Introduction 1 1.1 Background 1 1.2 Motivations and Objectives 2 Chapter 2 Theory and Literature Review 4 2.1 Introduction to Electrochemical Capacitors 4 2.2 Electrical energy storage mechanisms of ECs 8 2.2.1 Electrical double-layer capacitors (EDLC) 8 2.2.2 Pseudocapacitors 12 2.2.3 Comparison of ECs and batteries 12 2.3 Applications of ECs 16 2.3.1 Power capture and supply 16 2.3.2 Power quality applications 17 2.3.3 Backup, safety and low maintenance applications 18 2.4 I Introduction to conducting polymers 20 2.4.1 Polypyrrole 27 2.4.2 Polyaniline 27 2.4.3 Thiophene−based conducting polymers 28 2.4.4 Carbon−conducting polymer composites 30 2.4.5 Other composites 32 Chapter 3 Polypyrrole/Carbon Supercapacitor Electrode with Remarkably Enhanced High-Temperature Cycling Stability by TiC NanoParticle Inclusion 34 3.1 Introduction 34 3.2 Experimental 36 3.3 Results and discussion 38 3.3.1 Physical analysis of PPy/TiC/AC composite materials 38 3.3.2 Electrochemical analysis of PPy/TiC/AC composite materials 40 3.4 Summary 47 Chapter 4 Wide-Temperature Range Operation Supercapacitors from TiC@Polypyrrole/ Polyvinyl alcohol with High Energy Density 48 4.1 Introduction 48 4.2 Experimental 51 4.3 Results and discussion 53 4.3.1 Physical analysis of TiC@PPy/PVA nanocomposite materials 53 4.3.2 Electrochemical analysis of TiC@PPy/PVA nanocomposite materials 60 4.4 Summary 74 Chapter 5 High-Performance Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate (PEDOT-PSS) Conducting-Polymer Supercapacitor Containing Hetero-Dimensional Carbon Additives 75 5.1 Introduction 75 5.2 Experimental 78 5.3 Results and discussion 79 5.3.1 Physical analysis of PPy/PVA/TiC nanocomposite materials 79 5.3.2 Electrochemical analysis of PEDOT:PSS/GO/CNT composite materials 84 Chapter 6 Summary 96 References 98 | |
dc.language.iso | zh-TW | |
dc.title | 導電高分子於超高電容器之應用 | zh_TW |
dc.title | Applications of conducting polymers in supercapacitors | en |
dc.type | Thesis | |
dc.date.schoolyear | 101-1 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 何國川,徐振哲,胡啟章,鄧熙聖 | |
dc.subject.keyword | 超級電容器,導電高分子,碳材,碳化鈦,聚合物複合材料, | zh_TW |
dc.subject.keyword | Supercapacitors,conducting polymer,carbon material,TiC,polymer composite, | en |
dc.relation.page | 121 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2013-01-31 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 4.77 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。