請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/10266
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳士元 | |
dc.contributor.author | Ju-Hung Chen | en |
dc.contributor.author | 陳如弘 | zh_TW |
dc.date.accessioned | 2021-05-20T21:15:26Z | - |
dc.date.available | 2012-02-20 | |
dc.date.available | 2021-05-20T21:15:26Z | - |
dc.date.copyright | 2011-02-20 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-02-08 | |
dc.identifier.citation | [1] C. P. Wen, “Coplanar waveguide: a surface strip transmission line suitable for nonreciprocial gyromagnetic device applications,” IEEE Trans. Microwave Theory Tech., vol. 17, no.12, pp. 1087–1090, Dec. 1969.
[2] R. N. Simons, Coplanar waveguide circuits, components, and systems. New York: John Wiley & Sons, 2001. [3] R. W. Jackson, “Considerations in the use of coplanar waveguide for millimeter-wave integrated circuits,” IEEE Trans. Microwave Theory Tech., vol. 34, no.12, pp. 1450–1456, Dec. 1986. [4] T. Hirota, Y. Tarusawa, and H. Ogawa, ” Uniplanar MMIC hybrids—a proposed new MMIC structure,” IEEE Trans. Microwave Theory Tech., vol. 35, no.6, pp. 576–581, Jun. 1987. [5] M.-D. Wu, S.-M. Deng, R.-B. Wu, and P. Hsu, “Full-wave characterization of the mode conversion in a coplanar waveguide right-angled bend,” IEEE Trans. Microwave Theory Tech., vol. 43, no.11, pp. 2532–2538, Nov. 1995. [6] J. Sor, Y. Qian, and T. Itoh, “Miniature low-loss CPW periodic structures for filter applications,” IEEE Trans. Microwave Theory Tech., vol. 49, no. 12, pp. 2336–2341, Dec. 2001. [7] T. Y. Yun and K. Chang, 'Uniplanar one-dimensional photonic bandgap structures and resonators,' IEEE Trans. Microwave Theory Tech., vol. 49, no. 3, pp. 549–553, Mar. 2001. [8] M. Walter, U. Muller, and A. Beyer, 'Application of the TLM method for the analysis of longitudinally periodic structures,' in IEEE MTT-S Int. Microwave Symp. Digest, 1997, pp 1231–1234. [9] W. R. Deal, R. Tsai, M. D. Lange, J. B. Boos, B. R. Bennett, and A. Gutierrez, “A W-Band InAs/AlSb low-noise/low-power amplifier,” IEEE Microwave Guided Wave Lett., vol. 15, no. 4, pp. 208–210, 2005. [10] A. Tessmann, I. Kallfass, A. Leuther, H. Massler, M. Kuri, M. Riessle, M. Zink, R. Sommer, A. Wahlen, H. Essen, V. Hurm, M. Schlechtweg, and O. Ambacher, ” Metamorphic HEMT MMICs and modules for use in a high-bandwidth 210 GHz radar,” IEEE J. Solid-State Circuits, vol. 43, no. 10, pp. 2070–2076, Oct. 2008. [11] R. N. Simons and S. R. Taub, “Coplanar waveguide radial line double stub and application to filter circuits,” Electron. Lett., vol. 29, no. 17, pp. 1584–1586, 1993. [12] S.-N. Lee, J.-I. Lee, Y.-J. Kim, and J.-G. Yook, “Miniaturized CBCPW bandpass filter based on thin film polyimide on lossy silicon,” IEEE Microwave Guided Wave Lett., vol. 16, no.10, pp. 546–548, 2006. [13] M. Nedil, A. Djaiz, and T.A. Denidni, “Ultra-wideband bandpass filter using back-to-back CBCPW-to-CBCPW transition,” Electron. Lett., vol. 44, no. 5, pp. 362–363, 2008. [14] Y. C. Lee and C. S. Park, “A compact and low-radiation CPW probe pad using CBCPW-to-microstrip transitions for V-Band LTCC applications,” IEEE Trans. Adv. Packag., vol. 30, no. 3, pp. 566–569, Aug. 2007. [15] H.-H. Lee and J.-Y. Park, ”Characterization of fully embedded RF inductors in organic SOP technology,” IEEE Trans. Adv. Packag., vol. 32, no. 2, pp. 491–496, May 2009. [16] D. Y. Jung, K. C. Eun, and C. S. Park, ”High-Q circular LTCC resonator using zigzagged via posts and a short stub for millimeter-wave system-on-package applications,” IEEE Trans. Adv. Packag., vol. 25, no. 2, pp. 216–222, Feb. 2009. [17] J.-P. Raskin, G. Gauthier, L. P. Katehi, and G. M. Rebeiz, “ Mode conversion at GCPW-to-microstrip-line transitions,” IEEE Trans. Microwave Theory Tech., vol. 48, no.1, pp. 158–161, Jan. 2000. [18] R. Phltόrak and M. Kitliński, ”Some remarks on the design of microstrip to coplanar line transformer,” in IEEE Microwave, Radar, and Wireless Comm. Conf., 2004, pp. 836–839. [19] C.-F. Hung, A.-S. Liu, C.-H. Chien, C.-L. Wang, and R.-B. Wu, “Bandwidth enhancement on waveguide transition to conductor backed CPW with high dielectric constant substrate,” IEEE Microwave Guided Wave Lett., vol. 15, no. 2, pp. 128–130, 2005. [20] D.-H. Kwon, ”A wideband balun and vertical transition between conductor-backed CPW and parallel-strip transmission line,“ IEEE Microwave Guided Wave Lett., vol. 16, no. 4, pp. 152–154, 2006. [21] J. H. Lim, G. B. Kim, and S. W. Hwang, ”Suppression of microwave resonances in wirebond transitions between conductor-backed coplanar waveguides,” IEEE Microwave Guided Wave Lett., vol. 18, no. 1, pp. 31–33, 2008. [22] J. J. Lee, K. C. Eun, D. Y. Jung, and C. S. Park, ”A novel GCPW to rectangular waveguide transition for 60 GHz applications,” IEEE Microwave Guided Wave Lett., vol. 19, no. 2, pp. 80–82, 2009. [23] Y.-C. Shih and T. Itoh, “Analysis of conductor-backed coplanar waveguide,” Electron. Lett., vol. 18, no. 12, pp. 538–540, Jun. 1982. [24] C. H. Wu and S. Uysal, “A new systematic and efficient method of analysis for conductor-backed coplanar-waveguide directional couplers,” IEEE Trans. Microwave Theory Tech., vol. 47, no.7, pp. 1127–1131, Jul. 1999. [25] H. Shigesawa, M. Tsuji, and A. A. Oliner, “Conductor-backed slot line and coplanar waveguide: dangers and full-wave analyses,” in IEEE MTT-S Int. Microwave Symp. Digest, 1988, pp. 199–202. [26] L.-M. Chou, R. G. Rojas, and P. Pathak, “A WH/GSMT based full-wave analysis of the power leakage from conductor-backed coplanar waveguides,” in IEEE MTT-S Int. Microwave Symp. Digest, 1992, vol. 1, pp. 219–222. [27] W. E. Mckinzie and N. G. Alexopoulos, “Leakage losses for the dominant mode of conductor-backed coplanar waveguide,” IEEE Microwave Guided Wave Lett., vol. 2, pp. 65–66, 1992. [28] M. Tsuji, H. Shigesawa, and A. A. Oliner, “New surface-wave-like mode on CPWs of infinite width and its role in explaining the leakage cancellation effect,” in IEEE MTT-S Int. Microwave Symp. Dig., 1992, pp. 495–498. [29] K. Beilenhoff and W. Heinrich, 'Excitation of the parasitic parallel-plate line mode at coplanar discontinuities,' in IEEE MTT-S Int. Microwave Symp. Dig., 1997, pp. 1789–1792. [30] C.-C. Tien, C.-K. C. Tzuang, and S. T. Peng, “Effect of finite-width backside plane overmoded conductor-backed coplanar waveguide,” IEEE Microwave and Guided Wave Lett., vol. 3, no.8, pp. 259–261, Aug. 1993. [31] C.-C. Tien, C.-K. C. Tzuang, S. T. Peng, and C.-C. Chang, “Transmission characteristics of finite-width conductor-backed coplanar waveguide,” IEEE Trans. Microwave Theory Tech., vol. 41, no.9, pp. 1616–1624, Sep. 1993. [32] W.-T. Lo, C.-K. C. Tzuang, S. T. Peng, C.-C. Tien, C.-C. Chang, and J.-W. Huang, “Resonant phenomena in conductor-backed coplanar waveguides (CBCPW’s),” IEEE Trans. Microwave Theory Tech., vol. 41, no. 12, pp. 2099–2108, Dec. 1993. [33] W. H. Haydl, “Resonance phenomena and power loss in conductor-backed coplanar structures,” IEEE Microw. Guided Wave Lett., vol. 10, pp. 514–516, Dec. 2000. [34] R. W. Jackson, ”Mode conversion at discontinuities in finite-width conductor-backed coplanar waveguide,” IEEE Trans. Microwave Theory Tech., vol. 37, no. 10, pp. 1582–1589, Oct. 1989. [35] S.-P. Liu and C.-K. C. Tzuang, 'Scattering analyses of asymmetric conductor-backed CPW open-end discontinuity problem,' IEEE Microwave Guided Wave Lett., vol. 7, no. 5, pp. 130–132, May 1997. [36] M. A. Magerko, L. Fan, and K. Chang, “Multiple dielectric structures to eliminate moding problems in conductor-backed coplanar waveguide MIC,” IEEE Microwave Guided Wave Lett., vol. 2, pp. 257–259, 1992. [37] N. K. Das, “Two conductor-backed configurations of slotline or coplanar waveguide for elimination or suppression of the power-leakage problem,” in IEEE MTT-S Int. Microwave Symp. Digest, 1994, vol. 1, pp. 153-156. [38] Y. Liu, K. Cha, and T. Itoh, “Elimination of resonance in finite-width conductor-backed coplanar waveguides,” in 24th European Microwave Conf., 1994, pp. 1222–1226. [39] M. A. Magerko, L. Fan, and K. Chang, “Configuration considerations for multi-layered packaged conductor-backed coplanar waveguide MICs,” in IEEE MTT-S Int. Microwave Symp. Digest, 1994, vol. 3, pp. 1697–1700. [40] Y. Liu, K. Cha, and T. Itoh, “Non-leaky coplanar (NLC) waveguides with conductor backing,” IEEE Trans. Microwave Theory Tech., vol. 43, no.5, pp. 1067–1072, May 1995. [41] C.-Y. Lee, Y. Liu, and T. Itoh, ”The effects of the coupled slotline mode and air-bridges on CPW and NLC waveguide discontinuities,” IEEE Trans. Microwave Theory Tech., vol. 43, no. 12, pp. 2759–2765, Dec. 1995. [42] N. K. Das, “Methods of suppression or avoidance of parallel-plate power leakage from conductor-backed transmission lines,” IEEE Trans. Microwave Theory Tech., vol. 44, no.2, pp. 169–181, Feb. 1996. [43] Z. Ma and E. Yamashita, “Comparative studies of discontinuities in single and double layered conductor-backed coplanar waveguides,” in IEEE MTT-S Int. Microwave Symp. Digest, 1996, vol. 3, pp. 1803–1806. [44] M. Hotta, Y. Qian, and T. Itoh, “Efficient FDTD analysis of conductor-backed CPW’s with reduced leakage loss,” IEEE Trans. Microwave Theory Tech., vol. 47, no.8, pp. 1585–1587, Aug. 1999. [45] M. Hotta, M. Kobayashi, T. Inoue, M. Hano, and T. Sakane, “Effects of backside grooving on leakage loss of conductor-backed coplanar waveguide,” in Microwave Conf., Asia-Pacific, 2001, pp. 847–850. [46] Y. Liu, C.-Y. Lee, and T. Itoh, ”Slotline antenna with non-leaky coplanar (NLC) waveguide feed ,” in IEEE AP-S Int. Symp. Digest, 1995, pp. 366–369. [47] Y. Qian and T. Itoh, ”Characterization and minimization of mutual coupling between NLC-FED slot antennas,” in IEEE MTT-S Int. Microwave Symp. Digest, 1997, pp. 1623–1626. [48] H.-C. Liu, T.-S. Horng, and N. G. Alexopoulos, “Radiation of printed antennas with a coplanar waveguide feed,” IEEE Trans. Antennas Propag., vol. 43, no.10, pp. 1143–1148, 1995. [49] D. R. Jahagirdar and R. D. Stewart, “Nonleaky conductor-backed coplanar waveguide-fed rectangular microstrip patch antenna,” IEEE Microw. Guided Wave Lett., vol. 8, pp. 115-117, 1998. [50] C. C. Tien, C. K. C. Tzuang, and J. Monroe, “Effect of lateral walls on the propagation characteristics of finite-width conductor-backed coplanar waveguides,” Electron. Lett., vol. 29, pp. 1357–1358, 1993. [51] G. E. Ponchak and R. N. Simons, “Channelized coplanar waveguide pin-diode switches,” in 19th European Microwave Conf., 1989, pp. 489–494. [52] R. N. Simons, G. E. Ponchak, K. S. Martzaklis, and R. R. Romanofsky, “Channelized coplanar waveguide discontinuities, junctions, and propagation characteristics,” IEEE MTT-S Int. Microw. Symp. Dig., 1989, pp. 915–918. [53] R. N. Simons and G. E. Ponchak, “Coax-to-channelised coplanar waveguide in-phase N-way, radial power divider,” Electron. Lett., vol. 26, no. 11, pp. 754–756, May 1990. [54] R. N. Simons, “New channelised coplanar waveguide to rectangular waveguide post and slot couplers,” Electron. Lett., vol. 27, no. 10, pp. 856–858, May 1991. [55] K. Wu, Y. Xu, and R. G. Bosisio, “Theoretical and experimental analysis of channelized coplanar waveguides (CCPW) for wideband applications of integrated microwave and millimeter-wave circuits,” IEEE Trans. Microwave Theory Tech., vol. 42, no. 9, pp. 1561–1569, Sep. 1994. [56] J.-G. Yook, N. I. Dib, and L. P. B. Katehi, “Characterization of high frequency interconnects using finite difference time domain and finite element methods,” IEEE Trans. Microwave Theory Tech., vol. 42, no. 9, pp. 1727–1736, Sep. 1994. [57] N. K. Das, “Two conductor-backed configurations of slotline or coplanar waveguide for elimination or suppression of the power-leakage problem,” in IEEE MTT-S Int. Microwave Symp. Digest, 1994, pp. 153–156. [58] W. H. Haydl, “On the use of vias in conductor-backed coplanar circuits,” IEEE Trans. Microwave Theory Tech., vol. 50, no. 6, pp. 1571–1577, Jun. 2002. [59] J. H. Chen and P. Russer, “The picosecond pulse transmission on the conductor-backed coplanar waveguide with via holes,” IEEE Microw. Wireless Compon, Lett., vol .16, pp. 419–421, 2006. [60] G. E. Ponchak, D. Chun, J.-G. Yook, and L.P.B. Katehi, ” The use of metal filled via holes for improving isolation in LTCC RF and wireless multichip packages,” IEEE Trans. Adv. Packag., vol. 23, no. 1, pp. 88–99, Feb. 2000. [61] J. Kim, B. Jung, P. Cheung, and R. Harjani, ”Novel CMOS low-loss transmission line structure,” in Radio and Wireless Conf., pp. 235–238, 2004. [62] D. Deslandes and K. Wu, “Analysis and design of current probe transition from grounded coplanar to substrate integrated rectangular waveguides,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 8, pp. 2487–2494, Aug. 2005. [63] A. Patrovsky, M. Daigle, and K. Wu, “Coupling mechanism in hybrid SIW–CPW forward couplers for millimeter-wave substrate integrated circuits,” IEEE Trans. Microwave Theory Tech., vol. 56, no. 11, pp. 2594–2601, Nov. 2008. [64] J. M. Johnson and Y. Raahmat-Sami, ”The tab monopole,” IEEE Trans. Antennas Propag., vol. 45, pp. 187–188, 1997. [65] C. T. H. Lim, A. Ali, and J. S. Fu, ”A broadband printed triangular monopole,” in Asia Pacific Microwave Conf., 2005. [66] M. A. Habib, M. Nedil, and T. A. Denidni, ”Radiation efficiency enhancement of slot antennas using EBG-pin inclusion,” in IEEE AP-S Int. Symp., 2006, pp. 2295–2298. [67] D. M. Pozar, Microwave Engineering, 2nd ed. New York: Wiley, 1998. [68] A. F. Harvey, 'Periodic and guiding structures at microwave frequencies,' IRE Trans. Microwave Theory Tech., vol. 8, pp.30–61, Jan. 1960. [69] S.-G. Mao and M.-Y. Chen, “Propagation characteristics of finite-width conductor-backed coplanar waveguides with periodic electromagnetic bandgap cells,” IEEE Trans. Microwave Theory Tech., vol. 50, no. 11, pp. 2624–2628, Nov. 2002. [70] R. E. Collin, Field Theory of Guided Waves, 2nd ed. New York: IEEE Press, 1991. [71] F.-R. Yang, K.-P. Ma, Y. Qian, and T. Itoh, ”A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuits,” IEEE Trans. Microwave Theory Tech., vol. 47, no. 8, pp. 1509–1514, Aug. 1999. [72] K.-H. Oh, T.-Y. Kim, S. Moon, H.-J. Song, W.-B. Kim, C.-S. Park, and J.-I. Song, “Characterization of uniplanar compact photonic-bandgap finite-width conductor-backed coplanar waveguide by using an electrooptic near-field mapping technique,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 2, pp. 854–860, Feb. 2006. [73] R. Abhari and G. V. Eleftheriades, “Suppression of the parallel-plate noise in high-speed circuits a metallic electromagnetic band-gap structure,” IEEE MTT-S Int. Microw. Symp. Dig., 2002, pp. 493–496. [74] W. Y. Leung, R. Biswas, S.-D. Cheng, M. M. Sigalas, J. S. McCalmont, G. Tuttle, and K.-M. Ho, “Slot antennas on photonic band gap crystal,” IEEE Trans. Antennas Propag., vol. 45, no.10, pp. 1569–1570, Oct. 1997. [75] J. D. Shumpert, W. J. Chappell, and L. P. B. Katehi, “ Parallel-plate mode reduction in conductor-backed slots using electromagnetic bandgap substrates,” IEEE Trans. Microwave Theory Tech., vol. 47, no. 11, pp. 2099–2104, Nov. 1999. [76] L. Li, X.-J. Dang, B. Li, and C.-H. Liang, ” Analysis and design of waveguide slot antenna array integrated with electromagnetic band-gap structures,” IEEE Antennas Wireless Propagat. Lett., vol. 5, pp. 111–115, 2006. [77] A. Neto, N. Llombart, G. Gerini, and P. D. Maagt, “On the optimal radiation bandwidth of printed slot antennas surrounded by EBGs,” IEEE Trans. Antennas Propag. , vol. 54, no.4, pp. 1074–1083, Apr. 2006. [78] F. Elek, R. Abhari, and G. V. Eleftheriades, “A uni-directional ring-slot antenna achieved by using an electromagnetic band-gap surface,” IEEE Trans. Antennas Propag. , vol. 53, pp. 181–190, Jan. 2005. [79] Z. Du, K. Gong, J. S. Fu, B. Gao, and Z. Feng 'A compact planar inverted-F antenna with a PBG-type ground plane for mobile communications,' IEEE Trans. Vehicular Tech., vol. 52, pp.483–489, May. 2003. [80] K. Ma, J. Ma, M. A. Do, and K. S. Yeo, “Experimentally investigating slow-wave transmission lines and filters based on conductor-backed CPW periodic cells,” in IEEE MTT-S Int. Microwave Symp. Digest, 2005, pp. 1653–1656. [81] T. S. D. Cheung, J. R. Long, K. Vaed, R. Volant, A. Chinthakindi, C. M. Schnabel, J. Florkey, and K. Stein, “On-chip interconnect for mm-wave applications using an all-copper technology and wavelength reduction,” in IEEE Int. Solid-State Circuits Conf. (ISSCC) Dig. Tech. Papers, Feb. 2003, pp. 396–397. [82] T. S. D. Cheung and J. R. Long, “Shielded passive devices for silicon-based monolithic microwave and millimeter-wave integrated circuits,” IEEE J. Solid-State Circuits, vol. 41, no. 5, pp. 1183–1200, May 2006. [83] R. R. Lahiji, L.P.B. Katehi, and S. Mohammadi, ”A distributed analogue CMOS phase shifter with shielded transmission line,” in 38th European Microwave Conf., 2008, pp. 817–820. [84] D. B. Schlieter and R. M. Henderson, “Designing high impedance etched ground GCPW,” in IEEE Wireless and Microwave Technology Conf., 2009, pp. 1–4. [85] J. Hesselbarth and R. Vahldieck, “Leakage suppression in coplanar waveguide circuit by patterned backside metallization, “ in IEEE MTT-S Int. Microw. Symp. Dig., 1999, vol. 3, pp. 871-874. [86] T. Nishino, Y. Yoshida, Y. Suehiro, S.-S. Lee, K. Miyaguchi, T. Fukami, H. Ohhashi, and O. Ishida, “A hollow-GCPW (HGCPW) as low-loss and wafer-conductivity-free structure on a single silicon wafer,” in 33th European Microwave Conf., 2003, pp. 41–44. [87] F. R. Williams and T. G. Ruttan, “Coplanar transmission structure having spurious mode suppression,” U.S. Patent 5 225 796, July 6, 1993. [88] D. F. Williams and D. W. Paananen, “Suppression of resonant modes in microwave packages,” in IEEE MTT-S Int. Microwave Symp. Dig., 1989, pp. 1263–1265. [89] S.-J. Kim, H.-S. Yoon, and H.-Y. Lee, “ Suppression of leakage resonance in coplanar MMIC packages using a Si sub-mount layer,” IEEE Trans. Microwave Theory Tech., vol. 48, no. 12, pp. 2664–2669, Dec. 2000. [90] D. Pozar, “Considerations for millimeter wave printed antennas,” IEEE Trans. Antennas Propag., vol. 31, no.5, pp. 740–747, 1983. [91] R. L. Rogers and D. P. Nekirk, “Use of broadside twin element antennas to increase efficiency on electrically thick dielectric substrates,” Int. J. Infrared Millimeter Waves., vol. 9, no. 11, pp. 949–969, 1988. [92] R. L. Rogers and D. P. Nekirk, “Radiation properties of slot and dipole elements on layered substrates,” Int. J. Infrared Millimeter Waves., vol. 10, no. 6, pp. 697–728, 1989. [93] R. L. Rogers, S. M. Wentworth, D. P. Nekirk, and T. Itoh, “A twin slot antenna on a layered substrate coupled to a microstrip feed line,” Int. J. Infrared Millimeter Waves., vol. 11, no. 10, pp. 1225–1249, 1990. [94] S. M. Wentworth, R. L. Rogers, J. G. Heston, D. P. Nekirk, and T. Itoh, “Millimeter wave twin slot antennas on layered substrates,” Int. J. Infrared Millimeter Waves., vol. 11, no. 2, pp. 111–131, 1990. [95] J. G. Heston, S. M. Wentworth, R. L. Rogers, D. P. Nekirk, and T. Itoh, “MM wave/FIR twin slot antenna structures,” in IEEE AP-S Int. Symp., 1990, pp. 788–790. [96] H. Kobayashi and Y. Yasuoka, “Slot-array antennas fed by coplanar waveguide for millimeter-wave radiation,” IEEE Trans. Microw. Theory Tech., vol. 46, no.6, pp. 800–805, 1998. [97] H. Kobayashi and Y. Yasuoka, “Slot array antennas fed by coplanar waveguide for millimeter wave radiation,” Millimeter Waves. Symp., 1997, pp. 169–172. [98] M. A. Hickey, M. Qiu, and G. V. Eleftheriades, “A reduced surface-wave twin arc-slot antenna for millimeter-wave applications,” IEEE Microw. Wireless Component Lett., vol. 11, no.11, pp. 459–461, 2001. [99] J. P. Jacobs, J. Joubert, and J. W. Odendaal, “Radiation efficiency of broadside conductor-backed CPW-fed twin slot antennas on two-layer dielectric substrate,” in IEEE 6th Africon Conference in Africa., 2002, vol. 2, pp. 531–533. [100] J. P. Jacobs, J. Joubert, and J. W. Odendaal, “Radiation efficiency and impedance bandwidth of conductor-backed CPW-fed broadside twin slot antennas on two-layer dielectric substrate,” IEE Microwaves, Antennas and Propagation, vol. 150, no. 4, pp. 185–190, Aug. 2003. [101] Q. Meide, M. Simcoe, and G. V. Eleftheriades, “High-gain meanderless slot arrays on electrically thick substrates at millimeter-wave frequencies,” IEEE Trans. Microw. Theory Tech., vol. 50, no. 2, pp. 517–528, Feb. 2002. [102] G. V. Eleftheriades and Q. Meide, “Efficiency and gain of slot antennas and arrays on thick dielectric substrates for millimeter-wave application: a unified approach,” IEEE Trans. Antennas Propag., vol. 50, no. 8, pp. 1088–1098, Aug. 2002. [103] Q. Meide and G. V. Eleftheriades, “Highly efficient unidirectional twin arc-slot antennas on electrically thin substrates,” IEEE Trans. Antennas Propag., vol. 52, no.1, pp. 53–58, Jan. 2004. [104] I-C. Lan and P. Hsu, “Parallel-plate slot array fed by conductor-backed coplanar waveguide.” in 35th European Microwave Conf., 2005, pp. 473–476. [105] I-C. Lan and P. Hsu, “Gain-enhanced slot antenna fed by conductor-backed coplanar waveguide,” in Asia Pacific Microwave Conf., 2006, pp. 73–76. [106] I-C. Lan, S.-Y. Chen, and P. Hsu, “Coupled twin slots fed conductor-backed coplanar waveguide,” IEEE Trans. Antennas Propag., vol. 56, no. 6, pp. 1784–1786, Jun. 2008. [107] I-C. Lan, S.-Y. Chen, and P. Hsu, “Pattern smoothness and gain enhancement of finite ground slot dipole antenna fed by conductor-backed coplanar waveguide,” in IEEE AP-S Int. Symp., 2008, pp. 1–4. [108] I-C. Lan, S.-Y. Chen, and P. Hsu, “Parallel-plate longitudinal slot array fed by conductor-backed coplanar waveguide,” submitted to IEEE Trans. Antennas Propag. [109] C.-H. Lee, S.-Y. Chen, and P. Hsu, ”Efficiency-enhanced and size-reduced coupled twin slots capacitively fed by conductor-backed coplanar waveguide,” IEEE Antennas Wireless Propagat. Lett., vol. 8, pp. 1033–1035, 2009. [110] C.-H. Lee, I-C. Lan, S.-Y. Chen, and P. Hsu, “Coplanar waveguide-fed twin slot antenna with and without a backed-conductor,” in IEEE AP-S Int. Symp., 2008, pp. 1–4. [111] Y.-J. Lu, I-C. Lan, S.-Y. Chen, and P. Hsu, “Finite-width conductor-backed coplanar waveguide-fed side-plane antenna,” in IEEE AP-S Int. Symp., 2008, pp. 1–4. [112] Y.-J. Lu, I-C. Lan, S.-Y. Chen, and P. Hsu, “Finite-width conductor-backed coplanar waveguide-fed circular polarized side-plane antenna,” in IEEE AP-S Int. Symp., 2010, pp. 1–4. [113] R. Q. Lee and R. N. Simons, “Slot-coupled patch antenna with coplanar waveguide feed,” IEEE Antennas and Propagation Society International Symposium, 1992, vol. 2, pp. 1048–1051. [114] R. N. Simons and R. Q. Lee, “Coplanar waveguide aperture coupled patch antennas with ground plane/substrate of finite extent,” Electron. Lett., vol. 28, pp. 75–76, Jan. 1992. [115] R. Q. Lee and R. N. Simons, “Coplanar-waveguide aperture-coupled microstrip patch antenna,” IEEE Microw. Guided Wave Lett., vol. 2, pp. 138–139, Apr. 1992. [116] L. Giauffret and J. M. Laheurte, “Microstrip antennas fed by conductor backed coplanar waveguides,” Electron. Lett., vol. 32, pp. 1149–11150, 1996. [117] N. R. S. Simons, A. Sebak, and A. Ittipiboon, 'Reflector elements for aperture and aperture coupled microstrip antennas,' IEEE Antennas and Propagation Magazine, vol. 37, no. 4, pp. 27–37, Aug. 1995. [118] J.-S. Row and J.-F. Wu, 'Aperture-coupled microstrip antennas with switchable polarization,' IEEE Trans. Antennas Propag., vol. 54, no. 9, pp. 2686–2691, Sep. 2006. [119] C.-Y. Huang, 'Designs for an aperture-coupled compact circularly polarised microstrip antenna,' IEE Microwave, Antennas and Propagation Proceedings., vol. 146, no. 1, pp. 13–16, Feb. 1999. [120] S. Gao, L. W. Li, M. S. Leong, and T. S. Yeo, 'A broad-band dual-polarized microstrip patch antenna with aperture coupling,' IEEE Trans. Antennas Propag., vol. 51, no. 4, pp. 898–900, Apr. 2003. [121] G. Felic and S. Skafidas, “Flip-chip interconnection effects on 60-GHz microstrip antenna performance,” IEEE Antennas Wireless Propagat. Lett., vol. 8, pp. 283–286, 2009. [122] S. Lee, S. Song, Y. Kim, J. Lee, C.-Y. Cheon, K.-S. Seo, and Y. Kwon, “A V-band beam-steering antenna on a thin-film substrate with a flip-chip interconnection,” IEEE Microw. Wireless Component Lett., vol. 18, no.4, pp. 287–289, 2008. [123] M.-J. Yim, J.-S. Hwang, W. Kwon, K. W. Jang, and K.-W. Paik, ”Highly reliable non-conductive adhesives for flip chip CSP applications,” IEEE Trans. Electronics Packaging Manufacturing, vol. 26, no. 2, pp. 150–155, 2003. [124] C. H. Cheng, K. Li, K. F. Tong, and T. Matsui, ”Aperture-coupled coplanar patch antennas,” in IEEE AP-S Int. Symp., 2001, vol. 3, pp. 506–509. [125] K. Li, C. H. Cheng, T. Matsui, and M. Izutsu, “Simulation and experimental study on coplanar patch and array antennas,” in Asia-Pacific Microwave Conf., 2000, pp. 1411–1414. [126] K. Li, C. H. Cheng, T. Matsui, and M. Izutsu, “Coplanar patch antennas: principle, simulation and experiment,” in IEEE AP-S Int. Symp., 2001, vol. 3, pp. 402–405. [127] K. Li and M. Izutsu, “Photodetection, photonic feeding coplanar patch antenna and transmitting experiment for radio-on-fiber system,” IEEE MTT-S Int. Microw. Symp. Dig., 2001, vol. 1, pp. 73–76. [128] P. L. Chin, A. Z. Elsherbeni, and C. E. Smith, “Characteristics of coplanar bow-tie patch antennas, “in IEEE AP-S Int. Symp., 2002, vol. 1, pp. 398–401. [129] M. Nedil, T. A. Denidni, and L. Talbi, “Design of a new bow-tie slot antenna excited by inductively and capacitively feeding configurations, ” in IEEE AP-S Int. Symp., 2003, vol. 2, pp. 896–899. [130] S. Pandey and R. Ramadoss, “Coplannar patch antenna fed at the non-radiating edge,” in IEEE AP-S Int. Symp., 2004, vol. 3, pp. 3397–3400. [131] K. Li, C.-P. Chen, T. Anada, and T. Matsui, “Electric field in coplanar patch antenna (CPA) – simulation and measurement,” in Asia Pacific Microw. Conf, 2005, vol. 1. [132] T. Zwick, D. Liu, J. Grzyb, and B. Gaucher, “A coplanar patch antenna for integration with mmwave SiGe transceiver,” IEEE International Workshop on Antenna Technology Small Antennas and Novel Metamaterials, 2006, pp.416–419. [133] K. F. Tong, K. Li, T. Matsui, and M. Izutsu, ”Broadband multi-layered coplanar patch antenna,” in IEEE AP-S Int. Symp., 2002, vol. 1, pp. 580–583. [134] K. F. Tong, K. Li, T. Matsui, and M. Izutsu, ”Broad-band double-layered coplanar patch antennas with adjustable CPW feeding structure,” IEEE Trans. Antennas Propag. , vol. 52, pp. 3153–3156, 2004. [135] K. F. Tong, K. Li, T. Matsui, and M. Matsui, ”Wideband coplanar waveguide fed coplanar patch antenna,” in IEEE AP-S Int. Symp., 2001, vol. 3, pp. 406–409. [136] B. R.Holland, R Ramadoss, S. Pandey, and P. Agrawal, ”Tunable coplanar patch antenna using varactor,” Electron. Lett., vol. 42, no. 6, pp. 319–321, 2006. [137] A. Sankarasubramaniam, P. N. Shastry, and K. Katragadda, “Design guidelines for tunable coplanar and microstrip patch antennas,“ in 37th European Microwave Conf., pp. 1302–1305, 2007. [138] C.–H. K. Chin, Q. Xue, and C. H. Chan, “Design of a 5.8-GHz rectenna incorporating a new patch antenna,” IEEE Antennas Wireless Propagat. Lett., vol. 4, pp. 175–178, 2005. [139] S. Zhu and R. Langley, “Dual-band wearable antennas over EBG substrate,” Electron. Lett., vol. 43, no. 3, pp. 141–142, 2007. [140] S. Zhu and R. Langley, “Dual-band wearable textile antenna on an EBG substrate,” IEEE Trans. Antennas Propag., vol. 57, no. 4, pp. 926–935, 2009. [141] K. Li, D. Kurita, K. F. Tong, and T. Matsui, “Back-fed coplanar patch antennas,” 33rd European Microwave Conf., pp. 1381–1384, 2003. [142] L. Zhu, “Guided-wave characteristics of periodic coplanar waveguides with inductive loading—unit-length transmission parameters,” IEEE Trans. Microwave Theory Tech., vol. 51, no. 10, pp. 2133–2138, Oct. 2003. [143] L. Li, F. Xu, K. Wu, S. Delprat, J. Ho, and M. Chaker, “Slow-wave line coupler with interdigital capacitor loading,” IEEE Trans. Microwave Theory Tech., vol. 55, no. 11, pp. 2427–2433, Nov. 2007. [144] H. Kim and R. Franklin-Drayton, ”Wire-bond free technique for right-angle coplanar waveguide bend structures,” IEEE Trans. Microwave Theory Tech., vol. 57, no. 2, pp. 442–448, Feb. 2009. [145] G. F. Engen and C. A. Hoer, ““Thru-Reflect-Line”: an improved technique for calibrating the dual six-port automatic network analyzer,” IEEE Trans. Microw. Theory Tech., vol. 27, no. 12, pp. 987–993, Dec. 1979. [146] W. L. Stutzman, “Estimating directivity and gain of antennas,” IEEE Antennas Propag. Mag., vol. 40, no. 4, pp. 7–11, Aug. 1998. [147] T. Tokunaga, M. Yamamoto, T. Nojima, and K. Itoh, “Polarisation switchable microstrip array antenna using proximity feeding technique,” Electronics Letters, vol.39, no 22, pp.1569–1570, 2003. [148] M. H. Zahedi, ”Study of electromagnetically coupled microstrip arrays,” M. Sc. thesis, University of Manitoba, Canada, Sept. 1997. [149] A. Eriksson, P. Linnér, and S. Gevorgian, “Mode chart of electrically thin parallel-plate circuit resonators,” IEE Proc.-Microw. Antennas Propagat., vol. 148, pp.51–55, Feb. 2001. [150] A. G. Derneryd, “Analysis of the microstrip disk antenna element,” IEEE Trans. Antennas Propagat., vol. 27, no. 5, pp. 660–664, Sep. 1979. [151] A. K. Bhattacharyya, “Effects of ground plane truncation on the impedance of a patch antenna,” IEE Proc.-Microw. Antennas Propagat., vol. 138, pp. 560–564, Dec. 1991. [152] D. R. Jackson, J. T. Williams, A. K. Bhattacharyya, R. L. Smith, S. J. Buchheit, and S. A. Long, “Microstrip patch designs that do not excite surface wave,” IEEE Trans. Antennas Propagat., vol. 41, no. 8, pp. 1026–1037, Aug. 1993. [153] D. H. Schaubert and K. S. Yngvesson, ”Experimental study of a microstrip array on high permittivity substrate,” IEEE Trans. Antennas Propagat., vol. 34, no. 1, pp. 92–97, Jan. 1986. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/10266 | - |
dc.description.abstract | 本論文提出以週期結構合成的洩漏抑制之背覆導體共面波導及其天線應用。
文中首先介紹以往解決背覆導體共面波導能量洩漏問題的各種方法,然後提出利 用週期結構的分析方法所設計的降低洩漏效應之三種背覆導體共面波導傳輸線結 構。接著利用吾人設計的傳輸線去饋入共面貼片天線,以提高其輻射效率並降低 交叉極化位準。相對於以往的各種解決方法,透過本設計,無論是結構複雜度以 及製作成本均可大幅降低。由於其平面結構且無須使用金屬連通柱,本設計因而 極為適合應用在微波與毫米波電路上。 接著,探討各種利用背覆導體共面波導饋入的平面天線,其中包含一個圓形 共面貼片天線、兩個雙開槽的槽孔天線與一個側板貼片天線。針對圓形共面貼片 天線,吾人透過實驗與模擬確認圓形共貼片天線的工作模態與微帶線饋入的圓形 貼片天線相互對應,並且針對連通柱的使用對此天線特性的影響作詳細探討,吾 人發現,如果沒有嚴重的側板共振現象,其實是不需要使用連通柱的,因為對天 線效能的改善非常有限。接著,吾人提出以背覆導體共面波導饋入之雙開槽的偶 極天線與環形槽孔天線,並與傳統共面波導饋入的天線做比較。吾人發現:在後者 的設計中,除了環形槽孔本身的共振外,共面貼片的共振模態也同時存在於該天 線結構中。此外,吾人也利用前述的洩漏抑制之背覆導體共面波導饋入以上兩種 天線,並對其初步模擬結果做簡要地探討。最後,本論文提出側板貼片天線並與 微帶線饋入之類似結構進行分析比較,吾人發現儘管饋入傳輸線不同,該天線依 然具有相近的效能。 | zh_TW |
dc.description.abstract | Novel leakage-suppressed conductor-backed coplanar waveguides with periodic structures are proposed in this dissertation, and their antenna applications are also presented. First, several previous works dealing with the leakage problem in conductor-backed coplanar waveguides are briefly reviewed. Based on the analysis of the periodic structure, three leakage-suppressed conductor-backed coplanar waveguide structures are proposed. Then, it is demonstrated that using the proposed transmission lines as the feed line for the coplanar patch antenna could result in higher antenna efficiency and lower cross-polarization levels. Compared with the previous works, using the proposed leakage-suppressed structures can significantly reduce not only the structure and design complexities but also the fabrication cost. The uni-planar and via-free structures make the proposed designs very attractive in the microwave and millimeter wave integrated circuits.
The second half of this dissertation deals with several conductor-backed coplanar waveguide-fed planar antennas, including a circular-shaped coplanar patch antenna, two bilateral slot antennas, and a side plane patch antenna. For the first design, the operation mechanism is shown both numerically and experimentally to be very similar to that of the circular-shaped patch antenna fed by microstrip line. Besides, the via-loading effect on the performance of the coplanar patch antenna is also investigated. As the side plane resonances become insignificant, it thus makes no difference to use via-holes because the improvement in the antenna performance is very limited. Then, the bilateral slot dipole and slot loop antennas are designed and compared with the coplanar waveguide-fed ones. In the latter design, it is found that besides the desired slot loop resonance, the coplanar patch resonance also exists in this design. In addition, we use the aforementioned leakage-suppressed CBCPWs to feed the two slot antenna, and some preliminary simulation results are discussed. Finally, the side plane patch antenna is presented and compared with that fed by microstrip line. Comparable performance could be observed between them in spite of the different feeding structures. | en |
dc.description.provenance | Made available in DSpace on 2021-05-20T21:15:26Z (GMT). No. of bitstreams: 1 ntu-100-F94942003-1.pdf: 4470996 bytes, checksum: 3673ca38c8af48671ae4a5b7b44e7931 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 誌謝 i
摘要 iii Abstract v Contents vii List of Figures x List of Tables xxi Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Literature Survey 1 1.3 Contributions 9 1.4 Chapter Outlines 10 Chapter 2 Leakage-Reduced Conductor-Backed Coplanar Waveguide with Periodic Structures 14 2.1 Introduction 14 2.2 Periodic Structure Design.……………………………………………….. 16 2.3 Simulation and Measurement Results.………………………………… ...22 2.3.1 Unit Cell…………………………………………………………….23 2.3.2 Straight Feed-Line Case…………………………………………….24 2.3.3 Right-Angled Bend Case……………………………………………25 2.3.4 Back-to-Back Case………………………………………………….27 2.4 Antenna Structure and Design……………………………………………… 28 2.5 Measurement Results…………………………………………………..…… 30 2.6 Design Procedure……………………………………………………………31 2.7 Summary…………………………………………………………………….32 Chapter 3 Conductor-Backed Coplanar Waveguide fed Antenna Designs 71 3.1 Introduction 71 3.2 Circular-Shaped Coplanar Patch Antenna………………………………...73 3.2.1. Antenna Design with Infinite Ground Plane………………………..73 3.2.2. Antenna Design with Finite Ground Plane…………………………75 3.2.3. Experimental Results…………………….…………………………76 3.2.4. Design Procedure…………………….……………………………..78 3.2.5. Summary……………………………………………………………78 3.3 Bilateral Slot Antenna …………………..…………………………….......79 3.3.1. Bilateral Slot Dipole Antenna Design ……….……………………..79 3.3.2. Simulation and Measurement Results………………….…………...81 3.3.3. Bilateral Slot Loop Antenna Design…………………….………….82 3.3.4. Simulation and Measurement Results………………….…………...84 3.3.5. Design Procedure…………………….……………………………..86 3.3.6. Summary……………………………………………………………86 3.4 Side Plane Patch Antenna……………….…………………………….......87 3.4.1. Antenna Structure and Design……….……….……………………..87 3.4.2. Experimental Results ……………….……………………….…......89 3.4.3. Dsign Procedure…………………….……………………………....90 3.4.4. Summary……………………………………………………………90 Chapter 4 Conclusion 123 Reference 127 Publication List 146 | |
dc.language.iso | en | |
dc.title | 洩漏抑制之背覆導體共面波導之設計及其天線應用 | zh_TW |
dc.title | Design of Leakage Suppressed Conductor-Backed Coplanar
Waveguide and Its Antenna Applications | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-1 | |
dc.description.degree | 博士 | |
dc.contributor.coadvisor | 許博文 | |
dc.contributor.oralexamcommittee | 張道治,林根煌,張知難,林育德,曾昭雄,馬自莊 | |
dc.subject.keyword | 共面波導,週期結構, | zh_TW |
dc.subject.keyword | Coplanar waveguide,periodic structure, | en |
dc.relation.page | 147 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2011-02-08 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf | 4.37 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。