請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/9791
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 李允立(Yun-Li Li) | |
dc.contributor.author | Chun-Chieh Chang | en |
dc.contributor.author | 張鈞傑 | zh_TW |
dc.date.accessioned | 2021-05-20T20:41:35Z | - |
dc.date.available | 2013-07-24 | |
dc.date.available | 2021-05-20T20:41:35Z | - |
dc.date.copyright | 2008-07-24 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-22 | |
dc.identifier.citation | [1] N. Narendran, “Improved Performance White LED,” 5th Internation Conference on Solid State Lighting, Proceedings of SPIE, 5941,45, Bellingham (2005)
[2] S. Nakamura and G. Fasol, “The Blue Laser Diodes, GaN Based Light Emitter and Lasers,” 216-221, Spinger, Berlin (1997) [3] A. Zauskas, F. Ivanauskas, R. Vaicekauskas, M. S. Shur and R. Gaska, “Optimization of multichip white solid state lighting source with four or moreLEDs,” Proceedings of SPIE, 4445, 148 (2001) [4] Y. Simizu, K. Sakano, Y. Niguchi and T. Moriguchi, “Light Emitting Device Having a Nitride Compound Semiconductor and A Phosphor Containing aGarnet Fluorescent Material,” United States Patent, US 5998925, Dec. 7 (1999) [5] A. Zukauskas, M. S. Shur and R. Caska, “Introduction to Solid-State Lighting”, Wiley, New York (2002). [6] S. Nakamura and G. Fasol, “The Blue laser Diodes”, Springer Heideberg (1997) [7] E.Fred Schubert ,“Light-Eimtting Diodes”, 2nd version, Gambridge (2006) [8] Yun F., Reshchikov M. A., He L., King T., Morkoc H., Novak S.W., and Wei L. “Energy band bowing parameter in AlxGa1-xN alloys” J. Appl. Phys. 92, 4837 (2002) [9] Wu J., Walukievicz W., Yu K. M., Ager J.W., Haller E. E., Lu H., and Schaff W. J. “Small band gap bowing in In1-xGaxN alloys” Appl. Phys. Lett. 80, 4741 (2002) [10] Siozade L., Leymarie J., Disseix P., Vasson A., Mihailovic M., Grandjean N., Leroux M., and Massies J. “Modelling of thermally detected optical absorption and luminescence of (In,Ga)N/GaN heterostructures” Solid State Commum. 115, 575 (2000) [11] Shigeo Shionoya, William H. Yen, “Phosphor Handbook ”, CRC-Press (1998) [12] J. K. Sheu, etal., “White-light emission from InGaN-GaN multiquantum well light-emitting diodes with Si and Zn codoped active well layer”, IEEE PHOTONICS TECHNOLOGY LETTERS, 14, No.4, 450 (2002) [13] 石景仁,“白光發光二極體用之釔鋁石榴石螢光粉合成與特性, pp.3 (2001) [14] J.A. DeLuca,“An Introduction to Luminescence in Inorganic Solids”, J. Chem. Educ. 57, 8, 541 (1980) [15] Chhajed S., Xi Y., Li Y.-L., Gessmann Th., and Schubert E. F., “Influence of Junction Temperature on Chromaticity and Color-Rendering Properties of Trichromatic White-Light Sources Based on Light-Emitting Diodes”, J. Appl. Phys. 97, 054506 (2005) [16] Barton D. L., Osinski M., Perlin P., Helms C. J., and Berg N. H., “Life Tests and Failure Mechanisms of GaN/AlGaN/InGaN Light-Emitting Diodes”, Proc. SPIE 3279, 17 (1998) [17] Silicone and Epoxy data are available at http://www.dowcorning.com/LED [18] S. Muthu, F. J. P. Schuurmans, and M. D. Pashley, “Red, Green, and Blue LEDs for white light illumination,” IEEE J. Select. Topics Quantum Electron., 333 (2002) [19] T. F. McNulty, D. D. Doxsee and J. W. Rose, “UV reflector and UV-Based Light Source Having Reduced UV Radiation Leakage Incorporating the same”, United States Patent, US 6686676 B2 (2004) [20] R. Mueller-Mach, G. O. Mueller, M. R. Krames, and T. Trottier, “High-Power Phosphor-Converted Light-Emitting Diodes Based on III–Nitrides,” IEEE J. Select. Topics Quantum Electron, 339 (2002) [21] Reuven Y. Rubinstein, “Simulation and the Monte Carlo Method”, 1st edition, John Wiley & Sons, Inc. (1981) [22] The index of refraction and of aluminum is available at http://www.luxpop.com/ [23] J. K. Kim, T. Gessmann, H. Luo, and E. F. Schubert, “GaInN Light-Emitting Diodes with RuO2/SiO2/Ag Omni-Directional Reflector”, Appl. Phys. Lett. 84, 22 (2004). [24] Luo H., Kim J. K., Schubert E. F., Cho J., Sone C., and Park Y, “Analysis of High-Power Packages for Phosphor-Based White Light-Emitting Diodes” , Appl. Phys. Lett. 86, 243505 (2005) [25] Kim J. K., Luo H., Schubert E. F., Cho J., Sone C., and Park Y, “Strongly Enhanced Phosphor Efficiency in GaInN White Light-Emitting Diodes Using Remote Phosphor Configuration and Diffuse Reflector Cup” , Jpn. J. Appl. Phys. – Express Lett. 44, L 649 (2005) [26] TracePro Tutorial, “Fluorescence Example”, Lambda Research Inc (2007) [27] Zhu, Y., N. Narendran, and Y. Gu. “Investigation of the optical properties of YAG:Ce phosphor”, Sixth International Conference on Solid State Lighting, Proceedings of SPIE. 6337, 63370S (2006) [28] L.G. Henyey, J.L. Greenstein, “Diffuse radiation in the galaxy”, Astrophysical J. 93, 70 (1941) [29] LightTool Tutorial, “Modeling Phosphors in LightTools”, Optical Research Associates [30] 康敦彥, “螢光粉型白光發光二極體之模型建構與最佳設計”, 國立台灣大學 應力所 碩士論文 (2006) [31] R. Mueller-Mach, G. O. Mueller, and M. R. Krames, “Phosphor materials and combinations for IlluminationGrade white pcLED”, Proc. SPIE 5187, 115–122 (2003). [32] Narendran, N., Y. Gu, J.P. Freyssinier-Nova, and Y. Zhu. “Extracting phosphor-scattered photons to improve white LED efficiency.” phys. stat. solidi (a) 202 (6), R60-R62 (2005) [33] M. R. Krames, etal., “High-Power III-Nitride Emitters for Solid-State Lighting”, Phys. Stat. Sol. (a), 192, No.2, 237 (2002) [34] Y. Simizu, K. Sakano, Y. Niguchi and T. Moriguchi, “Light Emitting Device Having a Nitride Compound Semiconductor and A Phosphor Containing a Garnet Fluorescent Material,” United States Patent, US 5998925 (1999) [35] A. A. Stelur, A. M. Srivastava, H. A. Comanzo and D. D. Doxsee, “Phosphor Blends for Generating White Light from Near-UV/Blue Light-Emitting Devices,” United States Patent, US 6685852 B2 (2004) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/9791 | - |
dc.description.abstract | 本論文的主旨在於探討如何藉由改善LED模組外在封裝的方式,加以增進整體 LED模組之光取出效率(extraction efficiency)及增進白光LED的光學特性:包括光均勻性或增進單位立體角光強度。主要利用TracePro光學軟體進行整體LED模組的設計與模擬,並輔以部份實際實驗量測結果來確認模擬結果的正確性與可靠性。
研究中首先成功的於TracePro軟體中建立了YAG:Ce螢光粉的散射模型與光波長轉換機制模型。之後我們藉由設計不同的凹杯以及取光鏡的形狀,搭配不同形式螢光粉的塗佈方式來嘗試提升LED模組的總光通量;另外藉由設計不同形式的反射杯及聚光透鏡來使LED達成高單位立體角光強度的目的。 在增進整體LED模組光取出效率方面,根據模擬結果,擁有最高光通量強度的組合為利用上直徑4.2 mm、下直徑3.2 mm、深度1 mm形式的凹杯,搭配上螢光粉遠離塗佈的技術,再加上型狀為半圓取光鏡的LED模組。預計可讓裸片發光強度為170 mW的藍光晶片經由封裝過後發出173.27 mW、相對色溫為6500K的白光,換算出的流明值則約為54流明。此光通量值為應用相同凹杯配合上傳統封裝形式(螢光粉均勻塗佈以及未加上取光鏡)時所能獲得的1.38倍。 在增進LED模組單位立體角光強度方面,比較利用反射杯及聚光透鏡兩種聚光方式:利用反射杯形式可獲得更高的單位立體角光強度值,其中心單位立體角光強度為未加反射杯LED模組的6.36倍,但卻伴隨較高的光損耗(6.33%)而造成較低的總光通量;而利用聚光透鏡可在光損耗較小(小於2%)的情況下達成聚光的目的,但能達成的單位立體角光強度值為未加聚光透鏡LED模組的5.27倍,小於利用反射杯形式聚光所能達成的值。 | zh_TW |
dc.description.abstract | In this thesis, we changed the LED packaging to improve the light extraction efficiency and light characteristic of a white light LED module. The optical software TracePro was used to design the LED module. The radiant flux was optimized by designed different cups, phosphor applying methods, and lens shapes of LED modules. Higher radiant intensity was obtained by designing the reflector or the condensing lens of a LED module.
At first we successfully established the simulation model by TracePro software for the white light LED using a blue LED chip with Ce:YAG phosphor. In the study of high extraction efficiency of a LED module, the highest radiant flux was obtained by using remote phosphor on type B cup (top diameter 4.2 mm, bottom diameter 3.2 mm, depth 1 mm) with a semi-sphere shape lens. The efficiency enhancement was 38% compared with the conventional LED structure. In the study of high radiant intensity of LED module, higher radiant intensity was obtained by using the LED module with a designed reflector. The radiant intensity of the LED module with a designed condensing lens was enhanced by a factor of 6.36 compared with the radiant intensity of a LED module without a reflector, but high light radiant flux loss was caused (6.33%) at the same time. Another method to get higher radiant intensity was using the condensing lens. The radiant intensity of the LED module with a designed condensing lens was enhanced by a factor of 5.27 compared with the radiant intensity of a LED module without a condensing lens. However, lower light radiant flux loss caused by the LED module with a condensing lens was lower than the value got from the LED module with a reflector. | en |
dc.description.provenance | Made available in DSpace on 2021-05-20T20:41:35Z (GMT). No. of bitstreams: 1 ntu-97-R95941019-1.pdf: 5865162 bytes, checksum: 93c4abc1eff8f63f7485f35fadcd568f (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | 口試委員會審定書 I
致謝 II 中文摘要 III 英文摘要 IV 目錄 V 圖目錄 VII 表目錄 X 第一章 前言 1 1.1研究動機 1 1.2白光LED之應用 2 第二章 LED封裝技術 3 2.1 LED介紹與工作原理 3 2.2螢光粉介紹與發光原理介紹 7 2.3 LED封裝技術 9 2.4白光LED技術 12 第三章 LED封裝光學模擬 14 3.1 TracePro 光學模擬軟體 14 3.2高功率白光LED模組架構與各項模擬參數 16 3.3 YAG螢光粉參數設定 21 第四章 不同封裝設計之光學模擬結果與討論 30 4.1螢光粉塗布及凹杯型式對於白光LED發光效率分析 30 4.2取光鏡對藍光LED模組發光效率與場形影響分析 33 4.3取光鏡對白光LED模組發光效率分析 36 4.4白光LED模組色均勻性分析與改進 38 4.5反射杯對於白光LED模組發光效率及場形之影響分析 43 4.6二次光學取光鏡設計與模擬 47 4.7本章小結 53 第五章 結論與未來展望 55 5.1 結論 55 5.2 未來展望 56 參考文獻 57 | |
dc.language.iso | zh-TW | |
dc.title | 提升高功率白光發光二極體光取出效率封裝技術之研究 | zh_TW |
dc.title | The research on improving extraction efficiency packaging technology for high power white light light-emitting diodes | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃鼎偉,張允崇 | |
dc.subject.keyword | 發光二極體,螢光粉,封裝,光取出效率, | zh_TW |
dc.subject.keyword | LED,phosphor,packaging,light extraction efficiency, | en |
dc.relation.page | 59 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2008-07-23 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf | 5.73 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。