請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/93756完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 劉建豪 | zh_TW |
| dc.contributor.advisor | Chien-Hao Liu | en |
| dc.contributor.author | 陳彥善 | zh_TW |
| dc.contributor.author | Yen-Shan Chen | en |
| dc.date.accessioned | 2024-08-07T17:06:26Z | - |
| dc.date.available | 2024-08-08 | - |
| dc.date.copyright | 2024-08-07 | - |
| dc.date.issued | 2024 | - |
| dc.date.submitted | 2024-08-02 | - |
| dc.identifier.citation | [1] K. Mykhailo, Z. Roman, K. Gennadiy, M. Kseniia, T. Roman, and P. Dmytro, “Influence of functional layers thickness on cdte based flexible solar cells efficiency,”in 2019 IEEE 8th International Conference on Advanced Optoelectronics and Lasers (CAOL), 2019: IEEE, pp. 469-472.
[2] Y. Siregar, "Optimizing the design of the solar cell roof at universitas sumatra utara by pvsyst," in 2022 6th International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM), 2022: IEEE, pp. 238-241. [3] C. Li, Z. Liu, X. Hao, and M. Green, "Design of nanostructured intermediate layer for tandem solar cells," in 2020 47th IEEE Photovoltaic Specialists Conference (PVSC), 2020: IEEE, pp. 2579-2581. [4] D. P. McMeekin et al., "A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells," Science, vol. 351, no. 6269, pp. 151-155, 2016. [5] G. Haidari, "Comparative 1D optoelectrical simulation of the perovskite solar cell," AIP Advances, vol. 9, no. 8, pp. 2579-2581, 2019. [6] A. Kumar and P. Sharma, "Transfer matrix method-based efficiency enhancement of lead-free Cs3Sb2Br9 perovskite solar cell," Solar Energy, vol. 259, pp. 63-71, 2023. [7] T.-Y. Wu, H.-R. Dong, M.-H. Huang, and D.-Z. Chen, "Evolution of technology fronts in organic solar cells," in 2012 Proceedings of PICMET'12: Technology Management for Emerging Technologies, 2012: IEEE, pp. 2917-2924. [8] M.-H. Huang, "Evolution of technology fronts in organic solar cells," in 2012 Proceedings of Portland International Center for Management of Engineering and Technology: Technology Management for Emerging Technologies, PICMET'12, 2012. [9] Z. Song et al., "Imaging the spatial evolution of degradation in perovskite/Si tandem solar cells after exposure to humid air," IEEE J. Photovolt, vol. 7, no. 6, pp. 1563-1568, 2017. [10] D. Khatiwada et al., "Morphological evolution and its impacts on performance of polymer solar cells," IEEE Trans. Electron Devices, vol. 62, no. 4, pp. 1284-1290, 2015. [11] S.-Y. Ma, C.-H. Shia, P.-C. Yang, Y.-M. Shen, and C.-F. Lin, "Morphological evolution of organic solar cells induced by external electric field," in 2011 37th IEEE Photovoltaic Specialists Conference, 2011: IEEE, pp. 001179-001181. [12] Z. Huang, L. Dahal, C. Salupo, A. Ferlauto, N. Podraza, and R. Collins, "Optimization of a-Si: H pin solar cells through development of n-layer growth evolution diagram and large area mapping," in 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC), 2013: IEEE, pp. 1788-1793. [13] R. Chowdhury, "Performance optimization of perovskite based solar cells without and with different ETM/HTM layers," in 2023 10th IEEE International Conference on Power Systems (ICPS), 2023: IEEE, pp. 1-6. [14] J. Pastuszak and P. Węgierek, "Photovoltaic cell generations and current research directions for their development," Materials, vol. 15, no. 16, p. 5542, 2022. [15] K. Kharel and A. Freundlich, "Wide bandgap (1.7 eV-1.9 eV) dilute nitride quantum engineered solar cells for tandem application with silicon," in 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC)(A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC), 2018: IEEE, pp. 0210-0213. [16] P. Chaudhuri, A. Kole, and G. Haider, "Analysis of the microstructure of silicon quantum dot superlattice embedded microcrystalline silicon carbide for solar cell application," in 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC), 2013: IEEE, pp. 1334-1338. [17] M. Aoki, T. Aoyama, and I. Sumita, "A Linear Relation behind Outstanding Crystalline Silicon Solar Cells," in 2019 IEEE 46th Photovoltaic Specialists Conference (PVSC), 2019: IEEE, pp. 0292-0295. [18] S. A. Ahmed, G. Desouki, and A. H. Zaki, "Technology evolution of solar cells and its reflections on the Egyptian electrical power networks," in 2015 Saudi Arabia Smart Grid (SASG), 2015: IEEE, pp. 1-5. [19] N. Berrouba-Tani and K. Ghaffour, "Impact of c-Si substrate and front surface passivation on interdigitated back contact silicon heterojunction solar cell with 2d simulation study," in 2017 International Renewable and Sustainable Energy Conference (IRSEC), 2017: IEEE, pp. 1-5. [20] B. Yan, G. Yue, J. Yang, and S. Guha, "High efficiency amorphous and nanocrystalline silicon thin film solar cells on flexible substrates," in 2012 19th International Workshop on Active-Matrix Flatpanel Displays and Devices (AM-FPD), 2012: IEEE, pp. 67-70. [21] A. Silveira et al., "Evolution of metallic connection technologies of busbar in silicon solar cells: brief review," in 2023 15th IEEE International Conference on Industry Applications (INDUSCON), 2023: IEEE, pp. 690-695. [22] R. Raimundo, R. A. M. Lameirinhas, C. A. Fernandes, and J. P. N. Torres, "Comparative analysis of organic and inorganic solar cells," in 2021 Telecoms Conference (ConfTELE), 2021: IEEE, pp. 1-6. [23] R. D. P. Santamaría et al., "Characterization of electrical parameters of cracked crystalline silicon solar cells in photovoltaic modules," in 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), 2021: IEEE, pp. 0846-0853. [24] W. E. G. Moreno, A. U. Duarte, L. dos Santos, and R. V. Lourega, "Photovoltaic solar energy: is it applicable in brazil?–a review applied to brazilian case," Materials and Geoenvironment, vol. 66, no. 2, pp. 99-120, 2019. [25] B.Hoex,"Tunnel oxide passivated contact (topcon) solar cells," PV-Manufacturing(accessed April 15, 2024.) [26] N. S. Tuhin, S. Akhter, I. Sultana, and M. Z. Sultan, "Comparative analysis, simulation and optimization of current density-voltage characteristics of CIGS and CZTS thin film solar cells," in 2020 2nd International Conference on Sustainable Technologies for Industry 4.0 (STI), 2020: IEEE, pp. 1-4. [27] W. Septina, A. C. Giovanelli, and N. Gaillard, "Over 10% efficient CuIn (S, Se) 2 thin film solar cells fabricated from molecular precursor ink," in 2022 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET), 2022: IEEE, pp. 171-174. [28] Y. Lin, X. Wu, W. Zhi, P. Hu, and K. Yin, "Research on modeling and simulation of Cd-Te thin film solar photovoltaic cells," in 2022 2nd International Conference on Electronic Information Technology and Smart Agriculture (ICEITSA), 2022: IEEE, pp. 15-23. [29] Z. Feng and Y. Zhou, "Research on thin film solar cell: Principal and parameters," in 2022 IEEE 2nd International Conference on Data Science and Computer Application (ICDSCA), 2022: IEEE, pp. 500-503. [30] C. Chang, S. Panigrahy, and D. K. Das, "Study of factors affecting the performance of CIGS based thin film solar cells," in 2023 IEEE Guwahati Subsection Conference (GCON), 2023: IEEE, pp. 1-6. [31] K. ElKhamisy, H. Abdelhamid, S. Elagooz, and E.-S. M. El-Rabaie, "The effects of surface plasmon polariton on silicon thin film solar cell array," in 2021 9th International Japan-Africa Conference on Electronics, Communications, and Computations (JAC-ECC), 2021: IEEE, pp. 65-68. [32] G. Limodio et al., "Modulated surface texturing of temporary Al foils substrates for high-efficiency thin-film, flexible solar cells," in 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), 2021: IEEE, pp. 1103-1105. [33] J. Wulf, E. Oliva, G. Mikolasch, J. Bartsch, F. Dimroth, and H. Helmers, "Thin film GaAs solar cell enabled by direct rear side plating and patterned epitaxial lift-off," in 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), 2021: IEEE, pp. 1931-1935. [34] A. Gok, Reliability and ecological aspects of photovoltaic modules. IntechOpen, 2020. [35] National Renewable Energy Laboratory,"Best research-cell efficiency 164 chart,"NREL(accessed April 15, 2024) [36] M. A. Green, "Third generation photovoltaics: comparative evaluation of advanced solar conversion options," in Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002., 2002: IEEE, pp. 1330-1334. [37] V. Yevdokymenko, N. Opanasyuk, L. Ponomarova, and Y. Gnatenko, "SnS and SnS 2 nanoparticles for printing third generation solar cells," in 2021 IEEE International Conference on Information and Telecommunication Technologies and Radio Electronics (UkrMiCo), 2021: IEEE, pp. 299-303. [38] G. González-Díaz et al., "The intermediate band approach in the third solar cell generation context," in 2013 Spanish Conference on Electron Devices, 2013: IEEE, pp. 297-300. [39] G. Conibeer and S. Shrestha, "Third generation approaches for Low Cost, Radiation Tolerant, Efficienct Space Solar Cells," in 2023 IEEE 50th Photovoltaic Specialists Conference (PVSC), 2023: IEEE, pp. 1-4. [40] Michael Hofmann,"Development of solar cells," Novaled(accessed April 15, 2024). [41] S. Gholipour and M. Saliba, "Bandgap tuning and compositional exchange for lead halide perovskite materials," in Characterization Techniques for Perovskite Solar Cell Materials: Elsevier, 2020, pp. 1-22. [42] H. Nanayakkara and G. A. Sewvandi, "Computational modeling of perovskite structured methylammonium lead iodide as a solar absorber," in 2018 Moratuwa Engineering Research Conference (MERCon), 2018: IEEE, pp. 367-371. [43] F. Shi, G.-e. Fu, E.-C. Xiao, and J. Li, "Lattice vibrational characteristics and dielectric properties of pure phase CaTiO 3 ceramic," Journal of Materials Science: Materials in Electronics, vol. 31, pp. 18070-18076, 2020. [44] M. Passi and B. Pal, "A review on CaTiO3 photocatalyst: Activity enhancement methods and photocatalytic applications," Powder Technology, vol. 388, pp. 274-304, 2021. [45] 崔孟晉，"染料敏化太陽能電池電解質概述，" Materialsnet(accessed 165 Apirl 16, 2024). [46] 王映樵，"奈米材料於染料及鈣鈦礦敏化太陽能電池之應用，" 國立臺灣大學材料科學與工程學系學位論文，2015 [47] H.-S. Kim et al., "Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%," Scientific Reports, vol. 2, no. 1, p. 591, 2012. [48] O. H. Perovskites, "Efficient hybrid solar cells based on meso-superstructured," Physical Review Letters, vol. 92, p. 210403, 2004. [49] N.-G. Park, "Perovskite solar cells: an emerging photovoltaic technology," Materials Today, vol. 18, no. 2, pp. 65-72, 2015. [50] J.-K. Lee and M. Yang, "Progress in light harvesting and charge injection of dye-sensitized solar cells," Materials Science and Engineering: B, vol. 176, no. 15, pp. 1142-1160, 2011. [51] Warminster,"DSSC: Dye Sensitized Solar Cells," Gamry (accessed 12 June, 2024). [52] J. J. Yoo et al., "Efficient perovskite solar cells via improved carrier management," Nature, vol. 590, no. 7847, pp. 587-593, 2021. [53] Y.-H. Lin et al., "A piperidinium salt stabilizes efficient metal-halide perovskite solar cells," Science, vol. 369, no. 6499, pp. 96-102, 2020. [54] A. Al-Ashouri et al., "Monolithic perovskite/silicon tandem solar cell with> 29% efficiency by enhanced hole extraction," Science, vol. 370, no. 6522, pp. 1300-1309, 2020. [55] A. Al-Ashouri et al., "Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells," Energy & Environmental Science, vol. 12, no. 11, pp. 3356-3369, 2019. [56] J. Warby et al., "Understanding performance limiting interfacial recombination in pin perovskite solar cells," Advanced Energy Materials, vol. 12, no. 12, p. 2103567, 2022. [57] Z. Song, S. C. Watthage, A. B. Phillips, and M. J. Heben, "Pathways toward high-performance perovskite solar cells: review of recent advances in organo-metal halide perovskites for photovoltaic applications," Journal Of Photonics For Energy, vol. 6, no. 2, pp. 022001-022001, 2016. [58] C.-H. Tsai, C.-M. Lin, and C.-H. Kuei, "Investigation of the effects of various organic solvents on the PCBM electron transport layer of perovskite solar cells," Coatings, vol. 10, no. 3, p. 237, 2020. [59] P.-A. Enkvist, J. Dinkel, and C. Lin, "Impact of the financial crisis on carbon economics: Version 2.1 of the global greenhouse gas abatement cost curve," McKinsey & Company, vol. 374, 2010. [60] A. K. Shukla, K. Sudhakar, and P. Baredar, "Recent advancement in BIPV product technologies: A review," Energy and Buildings, vol. 140, pp. 188-195, 2017. [61] G. Li, "Comprehensive investigations of life cycle climate performance of packaged air source heat pumps for residential application," Renewable and Sustainable Energy Reviews, vol. 43, pp. 702-710, 2015. [62] R. Wilson and A. Young, "The embodied energy payback period of photovoltaic installations applied to buildings in the UK," Building and Environment, vol. 31, no. 4, pp. 299-305, 1996. [63] E. Commission, "Communication from the commission to the european parliament, the council, the european economic and social committee and the committee of the regions youth opportunities initiative," European Commission, 2011. [64] M. Posnansky, T. Szacsvay, A. Eckmanns, and J. Jürgens, "New electricity construction materials for roofs and façades," Renewable Energy, vol. 15, no. 1-4, pp. 541-544, 1998. [65] B. P. Jelle, C. Breivik, and H. D. Røkenes, "Building integrated photovoltaic products: A state-of-the-art review and future research opportunities," Solar Energy Materials and Solar Cells, vol. 100, pp. 69-96, 2012. [66] V. Nikolić et al., "Implementation of solar energy systems and power efficiency increase for preschool facilities in city of Niš (Republic of Serbia)," Construction of Unique Buildings and Structures, vol. 4, pp. 21-33, 2014. [67] P. Bonomo, A. Chatzipanagi, and F. Frontini, "Overview and analysis of current BIPV products: new criteria for supporting the technological transfer in the building sector," VITRUVIO-International Journal of Architectural Technology and Sustainability, no. 1, pp. 67-85, 2015. [68] A. K. Shukla, K. Sudhakar, and P. Baredar, "A comprehensive review on design of building integrated photovoltaic system," Energy and Buildings, vol. 128, pp. 99-110, 2016. [69] University wafer,"What Is a Single Junction Gallium Arsenide Solar Cell?" University wafer (accessed May 8, 2024). [70] M. Neges, K. Schwarzburg, and F. Willig, "Monte Carlo simulation of energy loss and collection of hot charge carriers, first step towards a more realistic hot-carrier solar energy converter," Solar Energy Materials And Solar Cells, vol. 90, no. 14, pp. 2107-2128, 2006. [71] S. Almosni, "Growth, structural and electro-optical properties of GaP/Si and GaAsPN/GaP single junctions for lattice-matched tandem solar cells on silicon," INSA de Rennes,2015. [72] 張佳文，林福銘，"單接合太陽電池現況與堆疊型太陽電池未來挑戰，" 工業材料，vol. 369卷，pp. 137-145，2017. [73] W. Shockley and H. Queisser, "Detailed balance limit of efficiency of p–n junction solar cells," in Renewable Energy: Routledge,vol. 2, pp.35-54,2018. [74] J.-F. Guillemoles, T. Kirchartz, D. Cahen, and U. Rau, "Guide for the perplexed to the Shockley–Queisser model for solar cells," Nature Photonics, vol. 13, no. 8, pp. 501-505, 2019. [75]S. Byrnes, "The shockley-queisser limit and its discontents," American, 2015. [76] I. M. Peters and T. Buonassisi, "Energy yield limits for single-junction solar cells," Joule, vol. 2, no. 6, pp. 1160-1170, 2018. [77] M. Green, E. Dunlop, J. Hohl‐Ebinger, M. Yoshita, N. Kopidakis, and X. Hao, "Solar cell efficiency tables (version 57)," Progress In Photovoltaics: Research And Applications, vol. 29, no. 1, pp. 3-15, 2021. [78] X. Li et al., "Silicon heterojunction-based tandem solar cells: past, status, and future prospects," Nanophotonics, vol. 10, no. 8, pp. 2001-2022, 2021. [79] B. M. Kayes et al., "27.6% conversion efficiency, a new record for single-junction solar cells under 1 sun illumination," in 2011 37th IEEE Photovoltaic Specialists Conference, 2011: IEEE, pp. 000004-000008. [80] K. Yoshikawa et al., "Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%," Nature Energy, vol. 2, no. 5, pp. 1-8, 2017. [81] M. Jeong et al., "Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss," Science, vol. 369, no. 6511, pp. 1615-1620, 2020. [82] M. Wanlass, "Systems and methods for advanced ultra-high-performance InP solar cells," National Renewable Energy Laboratory (NREL), Golden, CO (United States), 2017. [83] M. Nakamura, K. Yamaguchi, Y. Kimoto, Y. Yasaki, T. Kato, and H. Sugimoto, "Cd-free Cu (In, Ga)(Se, S) 2 thin-film solar cell with record efficiency of 23.35%," IEEE Journal of Photovoltaics, vol. 9, no. 6, pp. 1863-1867, 2019. [84] NREL, private communication, 22 May 2019 [85] First Solar Press Release, First solar achieves yet another cell conversion efficiency world record, 24 February 2016 [86] D. U. Würfel, "Organic Photovoltaics," Fraunhofer ISE, (accessed 13 May, 2024). [87] A. S. Najm, S. A. Alwash, N. H. Sulaiman, M. Chowdhury, and K. Techato, "N719 dye as a sensitizer for dye‐sensitized solar cells (DSSCs): A review of its functions and certain rudimentary principles," Environmental Progress & Sustainable Energy, vol. 42, no. 1, p. e13955, 2023. [88] K. Sun et al., "Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1–xCdxS buffer layer," Advanced Energy Materials, vol. 6, no. 12, p. 1600046, 2016. [89] M. T. Hörantner and H. J. Snaith, "Predicting and optimising the energy yield of perovskite-on-silicon tandem solar cells under real world conditions," Energy & Environmental Science, vol. 10, no. 9, pp. 1983-1993, 2017. [90] T. Todorov, O. Gunawan, and S. Guha, "A road towards 25% efficiency and beyond: perovskite tandem solar cells," Molecular Systems Design & Engineering, vol. 1, no. 4, pp. 370-376, 2016. [91] M. Peplow, "Perovskite progress pushes tandem solar cells closer to market," Chemical&Engineering News (accessed April 18, 2024). [92] F. Gota, M. Langenhorst, R. Schmager, J. Lehr, and U. W. Paetzold, "Energy yield advantages of three-terminal perovskite-silicon tandem photovoltaics," Joule, vol. 4, no. 11, pp. 2387-2403, 2020. [93] J. L. Gray, "The physics of the solar cell," Handbook Of Photovoltaic Science And Engineering, vol. 2, pp. 82-128, 2011. [94] S. R. Fahim, H. M. Hasanien, R. A. Turky, S. H. A. Aleem, and M. Ćalasan, "A comprehensive review of photovoltaic modules models and algorithms used in parameter extraction," Energies, vol. 15, no. 23, p. 8941, 2022. [95] National Technology and Engineering Solutions of Sandia,"Single Diode Equivalent Circuit Models," National Technology and Engineering Solutions of Sandia (accessed April 19, 2024). [96] M. A. Green, "Solar cell fill factors: General graph and empirical expressions," Solid State Electronics, vol. 24, no. 8, pp. 788-789, 1981. [97] A. G. Aberle, "Surface passivation of crystalline silicon solar cells: a review," Progress in Photovoltaics: Research and Applications, vol. 8, no. 5, pp. 473-487, 2000. [98] V. L. Brano, A. Orioli, G. Ciulla, and A. Di Gangi, "An improved five-parameter model for photovoltaic modules," Solar Energy Materials and Solar Cells, vol. 94, no. 8, pp. 1358-1370, 2010. [99] T. Markvart and L. Castañer, "Principles of solar cell operation," in McEvoy's handbook of photovoltaics: Elsevier, 2018, pp. 3-28. [100] Y. Tao, Screen-printed front junction n-type silicon solar cells. IntechOpen, 2016. [101] T. Frankel, "Maxwell's equations," The American Mathematical Monthly, vol. 81, no. 4, pp. 343-349, 1974. [102] T. G. Mackay and A. Lakhtakia, ''The transfer-matrix method in electromagnetics and optics". Springer Nature, 2022. [103] P. G. Huray, Maxwell's equations. John Wiley & Sons, 2009. [104] C. C. Katsidis and D. I. Siapkas, "General transfer-matrix method for optical multilayer systems with coherent, partially coherent, and incoherent interference," Applied Optics, vol. 41, no. 19, pp. 3978-3987, 2002. [105] T. Dumelow, "Negative refraction and imaging from natural crystals with hyperbolic dispersion,"Solid State Physics, vol. 67: Elsevier,pp. 103-182, 2016. [106] C. Huygens, T. Young, A. J. Fresnel, and F. Arago, The wave theory of light: memoirs of Huygens, Young and Fresnel. American Book Company, 1900. [107] L. A. Pettersson, L. S. Roman, and O. Inganäs, "Modeling photocurrent action spectra of photovoltaic devices based on organic thin films," Journal of Applied Physics, vol. 86, no. 1, pp. 487-496, 1999. [108] J. Tauc, R. Grigorovici, and A. Vancu, "Optical properties and electronic structure of amorphous germanium," Physica Status Solidi (b), vol. 15, no. 2, pp. 627-637, 1966. [109] E. Davis and N. Mott, "Conduction in non-crystalline systems V. Conductivity, optical absorption and photoconductivity in amorphous semiconductors," Philosophical Magazine, vol. 22, no. 179, pp. 0903-0922, 1970. [110] L. S. Xie, G. Skorupskii, and M. Dinca, "Electrically conductive metal–organic frameworks," Chemical Reviews, vol. 120, no. 16, pp. 8536-8580, 2020. [111] B. D. Viezbicke, S. Patel, B. E. Davis, and D. P. Birnie III, "Evaluation of the Tauc method for optical absorption edge determination: ZnO thin films as a model system," Physica Status Solidi (b), vol. 252, no. 8, pp. 1700-1710, 2015. [112] S. Noimark et al., "Functionalised gold and titania nanoparticles and surfaces for use as antimicrobial coatings," Faraday Discussions, vol. 175, pp. 273-287, 2014. [113] NREL,"NSRDB: National Solar Radiation Database," NREL (accessed April 19, 2024). [114] KLA Corporation,"Spectral Reflectance Calculator," KLA (accessed April 19, 2024). [115] G. Hernández, Fabry-Perot Interferometers (no. 3). Cambridge University Press, 1988. [116] R. Santbergen, A. H. Smets, and M. Zeman, "Optical model for multilayer structures with coherent, partly coherent and incoherent layers," Optics Express, vol. 21, no. 102, pp. A262-A267, 2013. [117] B. Harbecke, "Coherent and incoherent reflection and transmission of multilayer structures," Applied Physics B, vol. 39, pp. 165-170, 1986. [118] MathWorks ,"MATLAB," MathWorks(accessed April 21, 2024). [119] COMSOL,"COMSOL," COMSOL(accessed April 21, 2024). [120] M. Burgelman, P. Nollet, and S. Degrave, "Modelling polycrystalline semiconductor solar cells," Thin Solid Films, vol. 361, pp. 527-532, 2000. [121] S. Degrave, M. Burgelman, and P. Nollet, "Modelling of polycrystalline thin film solar cells: new features in SCAPS version 2.3," in 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of, 2003, vol. 1: IEEE, pp. 487-490. [122] A. Shamardin, D. Kurbatov, and V. Volobuev, "Analysis of Spray Deposited Cu 2 ZnSn X Ge 1-x S 4 Thin Film Solar Cells: Model Creation in SCAPS-1D and Numerical Simulation of Their Performance," in 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), 2020: IEEE, pp. 01TFC20-1-01TFC20-4. [123] S. Gohri, J. Madan, R. Pandey, and R. Sharma, "Assessment of WSe 2 based BSF layer on CZTSSe solar cell using SCAPS-1D," in 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), 2021: IEEE, pp. 2020-2022. [124] K. K. Jha, S. Tripathy, A. Laref, and T. Lenka, "Comparative Study of Ge-doped CH 3 NH 3 Ge x Pb (1-x) I 3 Perovskite Solar Cell By SCAPS-1D Software," in 2022 IEEE International Conference on Nanoelectronics, Nanophotonics, Nanomaterials, Nanobioscience & Nanotechnology (5NANO), 2022: IEEE, pp. 1-6. [125] A. Hossain, M. M. Hasan, M. S. Rahman, and M. M. Hossain, "Fully lead-free all perovskite tandem solar cell with improved efficiency: Device simulation using SCAPS-1D," in 2020 IEEE Region 10 Symposium (TENSYMP), 2020: IEEE, pp. 1221-1224. [126] S. Gohri, J. Madan, and R. Pandey, "Impact of Glancing Angle Deposition Technique on the Performance of SnS Thin Film Solar Cell: SCAPS-1D simulation," in 2022 IEEE International Conference of Electron Devices Society Kolkata Chapter (EDKCON), 2022: IEEE, pp. 195-198. [127] S. G. Kumar, N. Suraj, A. Pramod, C. Prashanth, and G. V. Honnavar, "Investigating the Performance of a Wide Bandgap BaZrS 3 Perovskite Tandem Solar Cell," in 2023 International Conference on Smart Systems for applications in Electrical Sciences (ICSSES), 2023: IEEE, pp. 1-6. [128] A. Das, D. P. Samajdar, and B. K. Ravidas, "Investigation of the Efficiency of CsGeI 3-based solar cell using SCAPS-1D modeling and simulation," in 2022 IEEE International Conference of Electron Devices Society Kolkata Chapter (EDKCON), 2022: IEEE, pp. 91-95. [129] R. Katiyar, A. Kumar, and B. S. Sengar, "Numerical simulation of high-efficient perovskite-based solar cells using SCAPS 1D," in 2020 5th IEEE International Conference on Emerging Electronics (ICEE), 2020: IEEE, pp. 1-4. [130] V. Jha, S. Dasgupta, and A. Ganguly, "Study of PbS Nanomaterial Sensitized ZnO Based Solar Cell Using SCAPS-1D Simulator," in 2023 International Symposium on Devices, Circuits and Systems (ISDCS), 2023, vol. 1: IEEE, pp. 1-3. [131] A. Khanna, R. Pandey, J. Madan, and A. Dhingra, "Thickness optimisation and defect analysis of wide bandgap PbS-CQD Solar Cell by SCAPS-1D simulations," in 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), 2021: IEEE, pp. 2191-2193. [132] Alex Niemegeers, Marc Burgelman, Koen Decock, Stefaan Degrave, Johan Verschraegen ,"SCAPS," University of Gent (accessed April 21, 2024). [133] G. F. Burkhard and E. T. Hoke, "Transfer matrix optical modeling," McGehee Group (Stanford Univ), 2011. [134] M. Filipič et al., "CH3NH3PbI3 perovskite/silicon tandem solar cells: characterization based optical simulations," Optics Express, vol. 23, no. 7, pp. A263-A278, 2015. [135] N. J. Jeon et al., "o-Methoxy substituents in spiro-OMeTAD for efficient inorganic–organic hybrid perovskite solar cells," Journal of the American Chemical Society, vol. 136, no. 22, pp. 7837-7840, 2014. [136] P. Hartnagel and T. Kirchartz, "Understanding the light‐intensity dependence of the short‐circuit current of organic solar cells," Advanced theory and simulations, vol. 3, no. 10, p. 2000116, 2020. [137] M. Burgelman, K. Decock, A. Niemegeers, J. Verschraegen, and S. Degrave, "SCAPS manual," University of Ghent: Ghent, Belgium, 2016. [138] A. Ghorai, P. Kumar, S. Mahesh, Y.-H. Lin, H. J. Snaith, and K. Narayan, "Insights into the charge carrier dynamics in perovskite/Si tandem solar cells using transient photocurrent spectroscopy," Applied Physics Letters, vol. 120, no. 17, 2022. [139] J. Springer, A. Poruba, and M. Vanecek, "Improved three-dimensional optical model for thin-film silicon solar cells," Journal of applied physics, vol. 96, no. 9, pp. 5329-5337, 2004. [140]香港科技大學,"香港科技大學地圖," 香港科技大學官網(accessed 15 May, 2024). [141] I. Sarbu and I. Sarbu, Solar Heating And Cooling Systems. Springer, 2021. [142] A. G. Olabi, "Renewable energy-volume 1: solar, wind, and hydropower definitions, developments, applications, case studies, and modelling and simulation," 2023. [143] College of Earth and Mineral Sciences,"Collector Orientation," PennState(accessed 14 May, 2024). [144] M. E. Matius et al., "On the optimal tilt angle and orientation of an on-site solar photovoltaic energy generation system for Sabah’s rural electrification," Sustainability, vol. 13, no. 10, p. 5730, 2021. [145] Y. Tong et al., "Wide‐bandgap organic–inorganic lead halide perovskite solar cells," Advanced Science, vol. 9, no. 14, p. 2105085, 2022. [146] Ibrahim, A. Shoukat, F. Aslam, and Israr Ur Rehman, "Emerging trends in low band gap perovskite solar cells: materials, device architectures, and performance optimization," Molecular Physics, p. e2316273, 2024. [147] S. Bhattarai and T. Das, "Optimization of the perovskite solar cell design to achieve a highly improved efficiency," Optical Materials, vol. 111, p. 110661, 2021. [148] D. P. McMeekin et al., "A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells," Science, vol. 351, no. 6269, pp. 151-155, 2016. | - |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/93756 | - |
| dc.description.abstract | 近年來，隨著材料科學與製程快速進步，各種材料的太陽能電池與堆疊型太陽能電池相繼出現並帶來極高的經濟價值。為了解決傳統太陽能系統在美學、空間利用和建築一體化方面的問題，建築整合太陽能(Building-Integrated PhotoVoltaics，BIPV)技術應運而生。BIPV技術的目標是將太陽能裝置結合到建築物的設計中，以在保持建築美觀的同時更有效地利用太陽能資源。
本研究旨在利用MATLAB建立單接合鈣鈦礦太陽能電池之一維模型並透過轉移矩陣法(Transfer Matrix Method，TMM)配合有限元素分析、商用一維SCAPS和三維COMSOL有限元素模擬軟體分析電場分布、光電轉換效率等參數進而預測其年能量產生(Energy yield，EY)輸出，本研究將分為三個部分進行研究。 首先，研究將使用開源多層膜光吸收分析模擬網站KLA FILMETRICS和COMSOL驗證以MATLAB所撰寫的程式在垂直入射和斜向入射下的吸收率、反射率和穿透率的正確性，並確保在存在非相干層的情況下不會出現Fabry-Pérot 干涉的現象，以驗證MATLAB中TMM的部分。接著，通過已發表的文獻驗證內部電場和光電子的生成分布。最後，進一步驗證了JV（電流-電壓特性曲線）、Jsc (光電流)、Voc (開路電壓)、FF (填充係數)、PCE (光電轉換效率)等參數以及每小時能量產出(hour EY)的結果，以確認MATLAB中光電轉換的部分。同時，借鑒Richard Tauc於1966年開發的Tauc plot方法，將原先基於吸收係數(α)的Tauc plot改寫從已知能隙獲得理想吸收係數(α)的Tauc model。通過MATLAB和有限元素模擬軟體，由此可以找到使利用光學量測儀器量測的吸收係數(α)與模擬得到的吸收係數(α)之間能量產出誤差最小(5%)的參數值(A=9×10^4,B=0)，這有助於後續尋找能量產出最大的最佳化能隙。 最後，本研究將以香港科技大學(22.34°N 114.27°E)為模擬地點，採用建築附加型太陽能產品中的固定式太陽能板。利用Tauc model(A=9×10^4,B=0)，模擬了能隙為1.25~1.85 eV的範圍，每0.05 eV一個間隔，以及太陽能板固定傾角從0°到80°，吸收層厚度從300到1000 nm的範圍。透過模擬，最終發現最大能量產出是發生在太陽能板固定傾角(Tilt angle，β)等於20°，吸收層厚度為1000 nm以及吸收層能隙為1.35 eV的情況下，並且產出能得到一年中EY=4.474×10^9 J/m2的能量產生(以每天太陽時間12點進行模擬)。 | zh_TW |
| dc.description.abstract | Recent advances in material science and manufacturing processes have led to the development of various types of solar cells and composite stacked solar cells, which bring substantial economic value. To address issues with traditional solar systems in aesthetics, space utilization, and architectural integration, Building-Integrated Photovoltaics (BIPV) technology has emerged. The goal of BIPV technology is to integrate solar devices into the design of buildings, maintaining aesthetic appeal while efficiently utilizing solar energy resources.
This study aims to establish a one-dimensional model of single-junction perovskite solar cells using MATLAB and analyze parameters such as electric field distribution and photoelectric conversion efficiency through the Transfer Matrix Method (TMM) in conjunction with finite element analysis, commercial one-dimensional SCAPS, and three-dimensional COMSOL finite element simulation software. The study will be divided into three parts. Firstly, the study will use the open-source multi-layer film optical absorption analysis simulation website KLA FILMETRICS and COMSOL to verify the accuracy of the program written in MATLAB regarding absorption, reflection, and transmission rates under vertical and oblique incidence. This verification will ensure that there is no Fabry-Pérot interference in the presence of incoherent layers, validating the TMM part of MATLAB. Subsequently, the distribution of internal electric fields and photogenerated carriers will be verified against published literature. Finally, parameters such as JV, Jsc, Voc, FF, PCE, and hour energy yield (hour EY) will be further verified to confirm the photoelectric conversion part of MATLAB. Additionally, by referencing the Tauc plot method developed by Richard Tauc in 1966, the original Tauc plot based on the absorption coefficient (α) will be rewritten to derive the ideal absorption coefficient (α) from a known bandgap using the Tauc model. Through MATLAB and finite element simulation software, this approach will help find parameter values (A=9×10^4, B=0) that minimize the energy yield error (5%) between the measured and simulated absorption coefficients (α), aiding in the subsequent search for the optimal bandgap for maximum energy yield. Lastly, the study will simulate fixed solar panels in the building-attached solar products at the Hong Kong University of Science and Technology (22.34°N, 114.27°E). Using the Tauc model (A=9×10^4, B=0), simulations will cover a bandgap range of 1.25 to 1.85 eV, at intervals of 0.05 eV, with fixed tilt angles of the solar panel from 0° to 80° and absorption layer thicknesses from 300 to 1000 nm. The simulation results reveal that the maximum energy yield occurs with a fixed tilt angle (β) of 20°, an absorption layer thickness of 1000 nm, and a bandgap of 1.35 eV, producing an annual energy yield of EY=4.474×10^9 J/m² (simulated at solar noon each day). | en |
| dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2024-08-07T17:06:25Z No. of bitstreams: 0 | en |
| dc.description.provenance | Made available in DSpace on 2024-08-07T17:06:26Z (GMT). No. of bitstreams: 0 | en |
| dc.description.tableofcontents | 口試委員會審定書 i
誌謝 ii 中文摘要 iv 英文摘要 vi 目次 viii 圖次 xi 表次 xxv 參數表 xxvi 第一章 緒論 1 1.1 研究動機 1 1.2 文獻回顧 3 1.2.1 太陽能電池 3 1.2.2 鈣鈦礦太陽能電池 7 1.2.3 建築整合太陽能 12 1.2.4 單接合太陽能電池 15 1.2.5 能量產出 25 1.3 研究內容 35 第二章 理論 36 2.1 電磁波原理 36 2.2 傳遞矩陣法 38 2.2.1 基本矩陣 38 2.2.2 傳遞矩陣法 47 2.2.3 菲涅耳方程式 50 2.2.4 內部電場計算理論 58 2.3 Tauc plot 65 2.3.1 Tauc plot繪製流程 66 第三章 設計與模擬 70 3.1 研究大綱 70 3.2 研究設計 72 3.3 軟體介紹 76 3.3.1 MATLAB 76 3.3.2 COMSOL 76 3.3.3 SCAPS 77 3.4 模擬結構 78 3.4.1 MATLAB(1D) 79 3.4.2 COMSOL(2D) 82 3.4.3 SCAPS(1D) 83 第四章 MATLAB程式驗證 84 4.1 吸收率、反射率以及穿透率驗證 84 4.2 內部電場以及光電子生成分布驗證 95 4.3 JV以及hour EY驗證 103 第五章 Tauc model驗證 113 5.1 Tauc model VS Optics model 115 5.2 利用MATLAB以及SCAPS進行垂直入射驗證 120 5.2.1 MATLAB (A=105,B=0) 121 5.2.2 SCAPS (A=105,B=0) 129 5.2.3 Tauc model與Optics model誤差討論 137 5.2.4 Tauc model參數選擇 147 5.2.5 MATLAB (A=9×104,B=0) 152 5.2.6 SCAPS (A=9×104,B=0) 158 5.3 利用MATLAB進行斜向入射驗證 164 第六章 實際應用(模擬與預測) 170 6.1 鈣鈦礦電池結構及其參數 170 6.2 以香港科技大學鈣鈦礦太陽能電池為模擬地點進行建築整合太陽能年能量產出模擬與預測 178 6.2.1 天氣資料 180 6.2.2 入射角度設定 182 6.2.3 模擬結果與討論 185 第七章 結論 188 第八章 未來展望 189 參考文獻 190 | - |
| dc.language.iso | zh_TW | - |
| dc.subject | 鈣鈦礦太陽能電池 | zh_TW |
| dc.subject | 建築整合太陽能 | zh_TW |
| dc.subject | 年能量產出 | zh_TW |
| dc.subject | Tauc圖 | zh_TW |
| dc.subject | 傳遞矩陣法 | zh_TW |
| dc.subject | transfer matrix method | en |
| dc.subject | Perovskite solar cells | en |
| dc.subject | building-integrated photovoltaics | en |
| dc.subject | year energy yield | en |
| dc.subject | Tauc plot | en |
| dc.title | 利用Tauc模型最佳化單接合太陽能電池於香港區域年發電量分析 | zh_TW |
| dc.title | Applying Tauc model for optimizing annual energy yield of single junction solar cells in Hong Kong area | en |
| dc.type | Thesis | - |
| dc.date.schoolyear | 112-2 | - |
| dc.description.degree | 碩士 | - |
| dc.contributor.oralexamcommittee | 林彥宏;許麗 | zh_TW |
| dc.contributor.oralexamcommittee | Yen-Hung Lin;Li Xu | en |
| dc.subject.keyword | 鈣鈦礦太陽能電池,建築整合太陽能,年能量產出,Tauc圖,傳遞矩陣法, | zh_TW |
| dc.subject.keyword | Perovskite solar cells,building-integrated photovoltaics,year energy yield,Tauc plot,transfer matrix method, | en |
| dc.relation.page | 206 | - |
| dc.identifier.doi | 10.6342/NTU202402228 | - |
| dc.rights.note | 同意授權(全球公開) | - |
| dc.date.accepted | 2024-08-06 | - |
| dc.contributor.author-college | 工學院 | - |
| dc.contributor.author-dept | 機械工程學系 | - |
| 顯示於系所單位： | 機械工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-112-2.pdf | 15.58 MB | Adobe PDF | 檢視/開啟 |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。