請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/91373
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃光裕 | zh_TW |
dc.contributor.advisor | Kuang-Yuh Huang | en |
dc.contributor.author | 劉家豪 | zh_TW |
dc.contributor.author | Jia-Hao Liou | en |
dc.date.accessioned | 2024-01-26T16:12:56Z | - |
dc.date.available | 2024-01-27 | - |
dc.date.copyright | 2024-01-26 | - |
dc.date.issued | 2024 | - |
dc.date.submitted | 2024-01-15 | - |
dc.identifier.citation | [1]Giallorenzi, T. G., Bucaro, J. A., Dandridge, A., Sigel, G. H., Cole, J. H., Rashleigh, S. C., and Priest, R. G., “Optical Fiber Sensor Technology”, IEEE Trans. Microwave Theory, vol. 30, no. 4,1982, pp. 472–511.
[2]Cole, J. H., Johnson, R. L., and Bhuta, P. B., “Fiber Optic Detection of Sound’’, J.,Acoust. Soc. Amer., vol. 62,1977, pp. 1136-1138. [3]Wild, G. and Hinckley, S., “Acousto-Ultrasonic Optical Fiber Sensors: Overview and State-of-the-Art’’, IEEE Sensors Journal, vol. 8, no. 7, July 2008, pp. 1184-1193. [4]Fischer, B., Rohringer, W., Panzer, N., and Hecker, S., “Acoustic Process Control for Laser Materia Processing’’, Laser Technik Journal, vol. 14, no. 5, May 2017, pp. 21-25. [5]Sheem, S. K. and Cole, J. H., “Acoustic Sensitivity of Single-mode Optical Power Dividers,” Opt. Lett., vol. 4, no. 10, 1979, pp. 322–324. [6]Chen, R., Fernando, G. F., Butler, T., and Badcock, R. A., “A Novel Ultra-sound Fiber Optic Sensor Based on a Fused-tapered Optical Fiber Couple”, Meas. Sci. Technol., vol. 15, no. 8, 2004, pp. 1490-1495. [7]Hill, K.O., Fujii, Y., Johnson, D. C., and Kawasaki, B. S., “ Photosensitivity in Optical Fiber Waveguides: Application to Reflection Fiber Fabrication ”, Appl. Phys. Lett., vol. 32, no.10, 1978, pp. 647-649. [8]Grattan, K. T., Su, E. T., Sun, T., Basheer, P. A. M., and Kenneth, T. V., “Monitoring of Corrosion in Structural Reinforcing Bars: Performance Comparison Using In Situ Fiber-Optic and Electric Wire Strain Gauge Systems”, IEEE Sensors Journal, vol. 9, no. 11, NOV 2009, pp. 1494-1502. [9]Shin, C. S. and Lin, T. C, “Hygrothermal Damage Monitoring of Composite Adhesive Joint Using the Full Spectral Response of Fiber Bragg Grating Sensors”, Polymers, vol.14, no. 368, 2022, pp.1-20. [10]Chen, Y., Mo, S., Li, W., Huang, L., Wen, S., and He, Z., “Applications of Distributed Fiber Bragg Gratings to the Measurements of In-tube Fluid Temperature Distribution”, Applied Thermal Engineering, vol 220, 2023, pp. 1-14. [11]Jha, C. K., Jajoria, K., Chakraborty, A. L., and Shekhar, H., “A Fiber Bragg Grating-Based Sensor for Passive Cavitation Detection at MHz Frequencies”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, no. 5, May 2022, pp. 1682-1690. [12]Bai, X., Liang, Y. Z., Sun, H. J., Jin, L., Ma, J., Guan, B. O., and Wang, L. D., “Sensitivity Characteristics of Broadband Fiber-Laser-Based Ultrasound Sensors for Photoacoustic Microscopy”, Opt. Express, vol. 25, no. 15, 2017, pp. 17616-17626. [13]Liang, Y. Z., Liu, J. W., Jin, L., Guan, B. O., and Wang, L. D. “Fast-scanning photoacoustic microscopy with a side-looking fiber optic ultrasound sensor”, Biomed Opt Express, no. 9, 2018, pp. 5809–5816. [14]劉卲姮,2018,以光纖引導雷射激發之光聲成像系統開發(Development of Photoacoustic Imaging System with a Fiber Optic Guided Laser Generation),國立台北科技大學製造科學研究所碩士論文。 [15]Zhou, Y.Y., Cao, F., Huang, X.Z., Li H.H., Wei, D.S., Lai, P.X., and Wang, L.D., “Photoacoustic imaging of microenvironmental changes in facial cupping therapy”, Biomed. Opt. Express, no.11, 2020, pp. 2394-2401 [16]翁儷珊,2013,血紅素光譜資料特徵之統計模式應用分析(Applications of Statistical Models for Hemoglobin Spectral Signatures),國立台灣大學公共衛生學院流行病學與預防醫學研究所碩士論文。 [17]Guan, B. O., Jin, L., Ma, J., Liang, Y. Z., and Bai, X., “Flexible fiber-laser ultrasound sensor for multiscale photoacoustic imaging”. Opto-Electron Adv, no. 8, vol.4, 2021, pp. 200081.1-200081.14. [18]resolution-penetration-mod https://biophotonics.bccrc.ca/index.php/research/resolution-penetration-mod [19]Eargle, J., The Microphone Book 2nd edition, Focal Press, Oxford, 2005. [20]Dalmont, J. P., “Acoustic Impedance Measurement, part i: a review”, Journal of Sound and Vibration, vol. 243, no.3, 2001, pp. 427-439 [21]廖尉翔,2022,布拉格光纖光柵於固體結構多點動態應變及熱學量測之技術開發及資料解析(Development and Analysis of Multiple Point Dynamic Strain and Thermal Measurement Technique in Solid Structure Using Fiber Bragg Grating Sensor),國立台灣大學機械工程研究所碩士論文。 [22]沈育霖,2015/1,光纖感測器原理及在複合材料上之應用(The Principle of Fiber Optic Sensor and Its Application in Composite Materials),工業安全衛生月刊。 [23]蔣涵茵,2015,高靈敏度微型光纖光柵溫度感測器(Tiny High Sensitivity Temperature Sensors Using Fiber Bragg Grating),國立台灣大學機械工程研究所碩士論文。 [24]康獻文,2001,光纖分佈式洩漏偵測系統之新構型設計(The Novel Configuration Design of the Distributed Fiber Optic Leak Detection System),國立中山大學電機工程學系研究所碩士論文。 [25]Fomitchov, P. A. and Krishnaswamy, S., “Response of a fiber Bragg grating ultrasonic sensor’’, Opt. Eng., vol 42, no.4, April 2003, pp.956-963. [26]Jha, C. K., Jajoria, K., Chakraborty, A. L., and Shekhar, H., “A Fiber Bragg Grating-Based Sensor for Passive Cavitation Detection at MHz Frequencies”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, no. 5, May 2022, pp. 1682-1690. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/91373 | - |
dc.description.abstract | 光聲量測技術(Photoacoustic)常應用於非接觸性的物體測量,此種非侵入式的量測方式能大幅降低對待測物的傷害,使用光源激發待測物引起振動或變形進而發出超聲波,提供有關待測物形狀、內部構造或振動頻率等訊息。現行的光聲量測系統多使用壓電式的量測裝置,雖然有較好的聲學響應,但容易受到外部電場與磁場的干擾,體積也較為龐大。因此,本研究旨在設計和開發一種基於布拉格光柵的光聲測量系統,用於非接觸式測量物體表面的聲學振動。該系統利用布拉格光柵的繞射原理,接收布拉格光柵光纖反射回的光強變化,實現了高靈敏度和高精度的聲學測量,可以應用於材料科學、生物醫學、機械工程等領域。在定頻測時實驗中,分別在空氣中與水中進行性能測試,結果顯示Fiber Bragg Grating (FBG)量測系統在水中具有較佳的訊噪比,其適用頻寬可達數MHz。使用脈衝電弧產生隨機頻率聲源進行測試,FBG量測系統亦能有效接收並分析其頻譜,與市售壓電超音波感測器有相似量測結果。在光聲成像部分,設計非共軸式和共軸式兩種激發裝置,共軸式的裝置激發與聲音接收在同一軸線上,量測效果較理想。使用波長532 nm的脈衝雷射激發樣本,進行一維和二維的光聲掃瞄,電壓響應差異可有效分辨出組織中不同質地的位置。 | zh_TW |
dc.description.abstract | Photoacoustic measurement technology is commonly applied in non-contact object measurement. This non-invasive measurement method significantly reduces damage to the test object. It involves using light sources to excite the test object, causing vibration or deformation and emitting ultrasonic waves. This provides information about the shape, internal structure, or vibration frequency of the test object. Current photoacoustic measurement systems often use piezoelectric devices, which despite having better acoustic response, are susceptible to interference from external electric and magnetic fields and have a larger volume. Therefore, this study aims to design and develop a photoacoustic measurement system based on a Fiber Bragg Grating (FBG). This system is intended for non-contact measurement of the acoustic vibration on the surface of objects. The system utilizes the diffraction principle of FBG, receiving changes in light intensity reflected. This achieves high sensitivity and precision in acoustic measurement and can be applied in fields such as materials science, biomedical science, and mechanical engineering. In experiments conducted for frequency measurement, performance tests were carried out in both air and water. The results show that the FBG measurement system has better signal-to-noise ratio in water, with an applicable bandwidth of several megahertz. Testing with a pulsed electric arc generating a random frequency sound source demonstrated the FBG measurement system was able to effectively receive and analyze its spectrum. The measurement results were similar to those obtained with commercially available piezoelectric ultrasonic sensors. In the aspect of photoacoustic imaging, two types of excitation devices were designed, non-coaxial and coaxial. The coaxial configuration, where excitation and sound reception occur on the same axis, yielded more favorable measurement results. One-dimensional and two-dimensional photoacoustic scans measurement were performed by using a pulsed laser with a wavelength of 532 nm to excite the sample. Differences in voltage response effectively distinguished positions with different textures within the tissue. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2024-01-26T16:12:56Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2024-01-26T16:12:56Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 摘要 i
Abstract ii 目次 iv 圖次 vi 表次 ix 符號表 x 第一章 緒論 1 1.1 研究背景與動機 1 1.2 文獻回顧 1 1.2.1 無薄膜式光學麥克風 2 1.2.2 布拉格光柵光纖應用發展 5 1.2.3 光聲效應與光聲成像 7 1.3 研究目標 11 1.4 內容簡介 12 第二章 光聲量測系統 14 2.1 光學量測裝置 16 2.2 聲壓感測裝置 18 2.3 訊號擷取裝置 20 第三章 理論與分析 21 3.1 光柵光纖原理 21 3.2 光循環器 23 3.3 布拉格光柵光纖量測原理 24 第四章 光聲量測系統性能與系統測試 26 4.1 能量調變設置 26 4.2 FBG超音波量測實驗 28 4.2.1 定頻超音波量測 28 4.2.2 電弧超音波量測 34 第五章 光聲效應量測 39 5.1 激發裝置設計與分析 39 5.2 光聲成像分析 46 第六章 結論與未來展望 53 參考文獻 54 附錄 58 | - |
dc.language.iso | zh_TW | - |
dc.title | 布拉格光柵光纖於光聲量測系統之設計開發 | zh_TW |
dc.title | Design and Development of Photoacoustic Measurement System Using Fiber Bragg Grating | en |
dc.type | Thesis | - |
dc.date.schoolyear | 112-1 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 蔡得民;駱遠;廖先順 | zh_TW |
dc.contributor.oralexamcommittee | Der-Min Tsai;Yuan Luo;Hsien-Shun Liao | en |
dc.subject.keyword | 光聲成像技術,FBG布拉格光柵光纖,超音波感測器,能量調變法, | zh_TW |
dc.subject.keyword | Photoacoustic imaging technology,Fiber Bragg Grating (FBG),Ultrasonic sensor,Energy modulation method, | en |
dc.relation.page | 63 | - |
dc.identifier.doi | 10.6342/NTU202400079 | - |
dc.rights.note | 未授權 | - |
dc.date.accepted | 2024-01-16 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 機械工程學系 | - |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-112-1.pdf 目前未授權公開取用 | 5.99 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。