請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/8444
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 王暉(Huei Wang) | |
dc.contributor.author | Ting-Hsuan Fan | en |
dc.contributor.author | 范庭瑄 | zh_TW |
dc.date.accessioned | 2021-05-20T00:54:36Z | - |
dc.date.available | 2021-02-22 | |
dc.date.available | 2021-05-20T00:54:36Z | - |
dc.date.copyright | 2021-02-22 | |
dc.date.issued | 2021 | |
dc.date.submitted | 2021-02-05 | |
dc.identifier.citation | [1] SKA website [Online] https://www.skatelescope.org/ [2] Caiazzo et al., 'SKA Phase 1 System Requirements Specification,' 2017 [3] 3GPP website [Online] https://www.3gpp.org/ [4] S. Hu, F. Wang, and H. Wang, “A 28-/37-/39-GHz linear Doherty power amplifier in silicon for 5G applications,” IEEE J. Solid-State Circuits, vol. 54, no. 6, pp. 1586-1599, Jun. 2019. [5] H. Kim et al., 'A 28-GHz CMOS direct conversion transceiver with packaged 2 × 4 antenna array for 5G cellular system,' IEEE J. Solid-State Circuits, vol. 53, no. 5, pp. 1245-1259, May 2018. [6] K. Kibaroglu, M. Sayginer, T. Phelps and G. M. Rebeiz, 'A 64-element 28-GHz phased-array transceiver with 52-dBm EIRP and 8–12-Gb/s 5G link at 300 meters without any calibration,' IEEE Trans. Microw. Theory Techn., vol. 66, no. 12, pp. 5796-5811, Dec. 2018. [7] Y. Yin, S. Zihir, T. Kanar and G. M. Rebeiz, 'A 37-42 GHz 8x8 phased-array for 5G communication systems with 48-50 dBm EIRP,' IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2019, pp. 480-483. [8] S. Daneshgar et al., 'High-Power Generation for mm-Wave 5G Power Amplifiers in Deep Submicrometer Planar and FinFET Bulk CMOS,' in IEEE Transactions on Microwave Theory and Techniques, vol. 68, no. 6, pp. 2041-2056, June 2020. [9] Y. Wang, C.-C. Chiong, J.-K. Nai and H. Wang, 'A high gain broadband LNA in GaAs 0.15-μm pHEMT process using inductive feedback gain compensation for radio astronomy applications,' 2015 IEEE International Symposium on Radio- Frequency Integration Technology (RFIT), Sendai, Aug. 2015. [10] J. Yeh, C. Yang, H. Kuo and H. Chuang, 'A 24-GHz transformer-based single-in differential-out CMOS low-noise amplifier,' IEEE Radio Frequency Integrated Circuits Symposium, Boston, MA, 2009, pp. 299-302. [11] J. Lee and C. Nguyen, 'A K/Ka -Band Concurrent Dual-Band Single-Ended Input to Differential Output Low-Noise Amplifier Employing a Novel Transformer Feedback Dual-Band Load,' in IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 65, no. 9, pp. 2679-2690, Sept. 2018. [12] W.-C. Huang, C.-C. Chiong, and H. Wang, 'A fully-integrated S-band differential LNA in 0.15-μm GaAs pHEMT for radio astronomical receiver,' 2018 IEEE Radio- Frequency Integration Technology (RFIT), Melbourne, Aug. 2018. [13] Z.-Y. Jiang, Y. Chang, Y. Wang, C.-C. Chiong and H. Wang, 'High gain fully- integrated broadband differential LNAs in 0.15-μm GaAs pHEMT process using R-L-C feedback gain compensation for radio astronomical receiver,' 2019 IEEE MTT-S International Microwave Symposium (IMS), Boston, MA, USA, 2019. [14] C. Chang and Y. Lin, 'On-chip transformer-coupled balun bandpass filter for 5-GHz applications,' IEEE MTT-S International Microwave Symposium, Phoenix, AZ, 2015, pp. 1-4. [15] S. Chakraborty, L. E. Milner, A. Parker and M. Heimlich, 'A Folded Edge-Coupled Transformer Balun in GaAs with Excellent Balance from 9 to 20 GHz,' European Microwave Conference (EuMC), Madrid, 2018, pp. 1101-1104. [16] M. Ferndahl and H. Vickes, 'The combiner matrix balun, a transistor based differential to single-ended module for broadband applications,' IEEE MTT-S International Microwave Symposium, Baltimore, MD, 2011, pp. 1-4. [17] F. Wang and H. Wang, '24.6 An instantaneously broadband ultra-compact highly linear PA with compensated distributed-balun output network achieving >17.8dBm P1dB and >36.6% PAEP1dB over 24 to 40 GHz and continuously supporting 64-/256-QAM 5G NR Signals over 24 to 42 GHz,' in IEEE ISSCC Dig. Tech. Papers, Feb. 2020, pp. 372-374. [18] M. Vigilante and P. Reynaert, 'A wideband class-AB power amplifier with 29–57-GHz AM–PM compensation in 0.9-V 28-nm Bulk CMOS,' IEEE J. Solid-State Circuits, vol. 53, no. 5, pp. 1288-1301, May 2018. [19] R. Bhat, A. Chakrabarti, and H. Krishnaswamy, “Large-scale power combining and mixed-signal linearizing architectures for watt-class mmWave CMOS power amplifiers,” IEEE Trans. Microw. Theory Techn., vol. 63, no. 2, pp. 703-718, Feb 2015. [20] J. A. Jayamon, J. F. Buckwalter and P. M. Asbeck, 'Multigate-Cell stacked FET design for millimeter-wave CMOS power amplifiers,' IEEE J. Solid-State Circuits, vol. 51, no. 9, pp. 2027-2039, Sept. 2016. [21] J.-L. Lin, Y.-H. Lin, Y.-H. Hsiao, and H. Wang, “A K-band transformer based power amplifier with 24.4-dBm output power and 28% PAE in 90-nm CMOS technology,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2017, pp. 31–34. [22] W. Huang and H. Wang, 'An inductive-neutralized 26-dBm K -/ Ka -band power amplifier with 34% PAE in 90-nm CMOS,' IEEE Trans. Microw. Theory Techn., vol. 67, no. 11, pp. 4427-4440, Nov. 2019. [23] Y. Chang, B. Lu, Y. Wang and H. Wang, 'A Ka-Band stacked power amplifier with 24.8-dBm output power and 24.3% PAE in 65-nm CMOS technology,' IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2019, pp. 316-319. [24] N. Rostomyan, M. Özen and P. Asbeck, 'A Ka-Band Asymmetric Dual Input CMOS SOI Doherty Power Amplifier with 25 dBm Output Power and High Back-Off Efficiency,' Proc. IEEE Top. Conf. RF/Microw. Power Amplif. Radio Wireless Appl., Jan. 2019, pp. 1-4, [25] K. Dasgupta, S. Daneshgar, C. Thakkar, J. Jaussi, and B. Casper, “A 26 dBm 39 GHz power amplifier with 26.6% PAE for 5G applications in 28nm bulk CMOS,” in Proc. IEEE Radio Freq. Integr. Circuits Symp. (RFIC), Jun, 2019, pp. 235-238. [26] C. -W. Wang, Y. -C. Chen, W. -J. Lin, J. -H. Tsai and T. -W. Huang, 'A 20.8-41.6-GHz Transformer-Based Wideband Power Amplifier with 20.4-dB Peak Gain Using 0.9-V 28-nm CMOS Process,' IEEE/MTT-S International Microwave Symposium (IMS), Los Angeles, CA, USA, 2020, pp. 1323-1326. [27] C. A. Balanis, “Linear wire antennas,” in Antenna Theory: Analysis and Design, 3rd ed., USA: Wiley-Interscience, pp. 182-184. [28] V. Sokol, K. Hoffmann, J. Vajtr, “Noise figure measurement of highly mismatched DUT,” in Radioengineering. Vol. 12, 2003 [29] G. Gonzalez, 2 nd Ed., Microwave transistor amplifier analysis and design Taiwan: Pearson Education, 2008. [30] David M. Pozar, Microwave engineering. [31] N. Marchand, “Transmission line conversion transformers “Electronics, vol. 17, no. 12, pp. 142-145, Dec. 1944. [32] M. E. Goldfarb, J. B. Cole, and A. Platzker, “A novel MMIC biphase modulator with variable gain using enhancement-mode FET’s suitable for 3 V wireless applications,” in IEEE Microw. Millimeter-Wave Monolithic Circuits Symp., Dig., May 1994, pp. 99–102. [33] T. Hiraoka, T. Tokumitsu, and M. Akaike, “A minaturized broad-band MMIC frequency doubler,” IEEE Trans. Microw. Theory Tech., vol. 38, no. 12, pp. 1932–1937, Dec. 1990. [34] K. Jung, W. R. Eisenstadt, R. M. Fox, A. W. Ogden, and J. Yoon, “Broadband active balun using combined cascode-cascade configuration,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 8, pp. 1790–1796, Aug. 2008. [35] M. Kawashima, T. Nakagawa, and K. Araki, “A novel broadband active balun,” in Proc. Eur. Microw. Conf., Oct. 2003, pp. 495–498. [36] T.-T. Hsu and C.-N. Kuo, “Low power 8-GHz ultra-wideband active balun,” in Silicon Monolith. Integr. Circuits RF Syst. Dig., Jan. 2006, pp. 18–20. [37] C. Viallon, D. Venturin, J. Graffeuil, and T. Parra, “Design of an original K-band active balun with improved broadband balanced behavior,” IEEE Microw.Wireless Compon. Lett., vol. 15, no. 4, pp. 280–282, Apr. 2005. [38] A. H. Baree and I. D. Robertson, “Monolithic MESFET distributed baluns based on the distributed amplifier gate-line termination technique,” IEEE Trans. Microw. Theory Tech., vol. 45, no. 2, pp. 188–195, Feb. 1997. [39] I. D. Robertson and A. H. Aghvami, “A novel wideband MMIC active balun,” in Proc. Eur. Microw. Conf., Oct. 1990, pp. 419–423. [40] M. Ferndahl and H.-O. Vickes, “The matrix balun—A transistor-based module for broadband applications,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 1, pp. 53–60, Jan. 2009. [41] Z.-Y. Jiang, “Design of differential LNA for radio astronomy receiver and mixer with improved linearity for 5G communication.” Maser thesis, National Taiwan University, 2019 [42] Wei-Cheng Huang, “Design of differential LNA for radio astronomy receiver and high-efficiency K-band CMOS-based power amplifier with inductance-based neutralization for 5G communication.” Master thesis, National Taiwan University, 2018. [43] T. Li and H. Wang, 'A Continuous-Mode 23.5-41GHz Hybrid Class-F/F-l Power Amplifier with 46% Peak PAE for 5G Massive MIMO Applications,' IEEE Radio Frequency Integrated Circuits Symposium (RFIC), Philadelphia, PA, 2018, pp. 220-230, [44] K. Fang and J. F. Buckwalter, “Efficient linear millimeter-wave distributed transceivers in CMOS SOI,” IEEE Trans. Microw. Theory Techn., vol. 67, no. 1, pp. 295–307, Jan. 2019. [45] F. Torres, M. De Matos, A. Cathelin and E. Kerhervé, 'A 31 GHz 2-Stage reconfigurable balanced power amplifier with 32.6dB power gain, 25.5% PAEmax and 17.9dBm Psat in 28nm FD-SOI CMOS,' in Proc. IEEE Radio Freq. Integr. Circuits Symp. (RFIC), Jun, 2019, pp. 236-239. [46] J. Zhao, M. Bassi, A. Bevilacqua, A. Ghilioni, A. Mazzanti and F. Svelto, 'A 40–67GHz power amplifier with 13dBm PSAT and 16% PAE in 28 nm CMOS LP,' in Proc. 40th European Solid-State Circuits Conference (ESSCIRC), Sep. 2014, pp. 179-182. [47] H. Jia, C. C. Prawoto, B. Chi, Z. Wang and C. P. Yue, ' A 32.9% PAE, 15.3 dBm, 21.6–41.6 GHz power amplifier in 65nm CMOS using coupled resonators,' Proc. IEEE Asian Solid-State Circuits Conf., Nov. 2016, pp. 345-348. [48] M. M. R. Esmael, M. A. Y. Abdalla and I. A. Eshrah, 'A 19-43 GHz linear power amplifier in 28nm Bulk CMOS for 5G phased array,' Proc. IEEE Top. Conf. RF/Microw. Power Amplif. Radio Wireless Appl., Jan. 2019, pp. 1-3. [49] S. C. Cripps, RF Power Amplifiers for Wireless Communication. Boston, MA: Artech House, 2000. [50] Noel Deferm, Patrick Reynaert, CMOS Front Ends for Milimeter Wave Wireless Communication Systems, 2015. [51] T. S. D. Cheung and J. R. Long, 'Shielded passive devices for silicon-based monolithic microwave and millimeter-wave integrated circuits,' IEEE J. Solid-State Circuits, vol. 41, no. 5, pp. 1183-1200, May 2006. [52] F. Sarvar, N. J. Poole, and P. A. Witting, “PCB glass-fibre laminates: Thermal conductivity measurements and their effect on simulation,” J. Electron. Mater., vol. 19, no. 12, pp. 1345–1350, Dec. 1990. [53] S. Lee, S. Kang and S. Hong, 'A 28-GHz CMOS Linear Power Amplifier With Low Output Phase Variation Over Dual Power Modes,' in IEEE Microwave and Wireless Components Letters, vol. 29, no. 8, pp. 551-553, Aug. 2019. [54] Y. -W. Chang, T. -C. Tsai, J. -Y. Zhong, J. -H. Tsai and T. -W. Huang, 'A 28 GHz Linear and Efficient Power Amplifier Supporting Wideband OFDM for 5G in 28nm CMOS,' IEEE/MTT-S International Microwave Symposium (IMS), Los Angeles, CA, USA, 2020, pp. 1093-1096. [55] Y. Chen, T. Tsai, J. Tsai and T. Huang, 'A 38-GHz-Band Power Amplifier with Analog Pre-distortion for 1600-MHz Transmission Bandwidth 64-QAM OFDM Modulated Signal,' IEEE MTT-S International Microwave Symposium (IMS), Boston, MA, USA, 2019, pp. 312-315. [56] H. Park et al., 'A High Efficiency 39GHz CMOS Cascode Power Amplifier for 5G Applications,' IEEE Radio Frequency Integrated Circuits Symposium (RFIC), Boston, MA, USA, 2019, pp. 179-182. [57] T. -H. Fan, Y. Wang and H. Wang, 'A Broadband Transformer-Based Power Amplifier Achieving 24.5-dBm Output Power Over 24-41 GHz in 65-nm CMOS Process,' in IEEE Microwave and Wireless Components Letters. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/8444 | - |
dc.description.abstract | 低雜訊放大器在接收機系統中扮演重要角色。在射頻天文應用中,需要高靈敏度的接收器。對於平方公里陣列,射頻望遠鏡的工作頻率範圍很寬。平方千米陣列計畫中頻覆蓋 0.35 到 25 GHz 的頻率範圍,需要寬帶高增益低雜訊放大器。這個頻帶被分成幾個子頻帶,其中一個子頻帶覆蓋 4.6 到 8.5 GHz 的頻率範圍。此外,隨著第五代行動通訊的發展,毫米波的研究與應用已經成為現在的趨勢。然而,對於頻寬及更高的傳輸速率需求與日俱增,其中,28 及 39 GHz 為第五代行動通訊主要潛在發展頻段。 本篇論文主要分成兩個部分: 第一部分為接收器前端電路之低雜訊放大器相關研究。藉由準確地選擇電路架構,在晶片上使用主動式寬頻巴倫來做系統整合,此低雜訊放大器在 4.6 到 8.5 GHz 系統規格之頻帶內提供足夠增益(28 ± 1 dB)及雜訊指數(1 ± 0.2 dB)。這個低雜訊放大器實現了差動輸入-單端輸出的架構。因此它適用於下一代前端射頻天文接收器系統。 第二部分介紹了採用65nm CMOS製造的Ka頻段寬頻功率放大器,其中設計頻段是未來的5G可行通信頻段(24至43GHz)。單級功率放大器提供26至41 GHz的3-dB頻寬和24至41 GHz的52.3% 1-dB 飽和功率比例頻寬的大訊號性能,25到37 GHz的38.2% 1-dB增益壓縮點的比例頻寬和從26 GHz到38 GHz功率附加效率皆超過20%。該功率放大器利用寬頻匹配技術來提供更好的頻寬表現。 | zh_TW |
dc.description.abstract | Array (SKA), the radio telescope has a wide operating frequency range. The SKA-mid array covering the frequency range of 0.35 to 25 GHz and requires a broadband high gain LNA. This band is divided into several sub-bands, where one of SKA band covers the frequency range of 4.6 to 8.5 GHz. Besides, with the development of the fifth-generation mobile communication (5G), the demand for bandwidth and higher transmission rates is increasing day by day. Among them, 28 and 38 GHz are the main potential development bands for the fifth-generation mobile communication. This dissertation is divided into two parts. The first part is the research of low noise amplifier. By accurately selecting the circuit architecture, the fully on-chip broadband active balun is used for advanced system integration. This low noise amplifier provides peak gain (28 ± 1 dB) and noise figure (1 ± 0.2 dB) in the 4.6 to 8.5 GHz. This low noise amplifier achieves the differential input to single-ended output architecture. Hence, it is suitable for next-generation radio astronomical receiver system. The second part presents a wideband power amplifier, where the design band is the future 5G feasible communication band (24 to 43GHz). The one-stage power amplifier provides 3-dB bandwidth from 26 to 41 GHz and wideband large-signal performance of 52.3% 1-dB Psat fractional bandwidth from 24 to 41 GHz, 38.2% OP1dB fractional bandwidth from 25 to 37 GHz, and a PAE above 20% from 26 to 38 GHz. This power amplifier utilizes a broadband matching technique to provide better bandwidth performance. | en |
dc.description.provenance | Made available in DSpace on 2021-05-20T00:54:36Z (GMT). No. of bitstreams: 1 U0001-0402202112501200.pdf: 5029409 bytes, checksum: 82fcc536cf206d37f5b39edd41f270b5 (MD5) Previous issue date: 2021 | en |
dc.description.tableofcontents | 口試委員會審定書 # 誌謝 ii 中文摘要 iv ABSTRACT vi CONTENTS viii LIST OF FIGURES xi LIST OF TABLES xvii Chapter 1 Introduction 1 1.1 Background and Motivation 1 1.2 Literature Survey 3 1.2.1 LNAs and baluns around C-band to Ku-band 3 1.2.2 Ka-band PAs in CMOS Process 5 1.3 Contributions 7 1.3.1 Broadband High Gain DLNA 7 1.3.2 Broadband High Output Power PA 8 1.4 Thesis Organization 9 Chapter 2 A Broadband DLNA in 0.15-μm GaAs pHEMT Process for Radio Astronomical Receiver 10 2.1 Introduction 10 2.1.1 Square Kilometre Array Project 10 2.1.2 Noise Figure of the Entire System 13 2.1.3 Effects of CMRR on Noise Figure. 14 2.2 Circuit Design 18 2.2.1 Circuit Architecture 18 2.2.2 Device Size and Bias Point Selection 20 2.2.3 Inductive Source Degeneration 25 2.2.4 R-L-C Feedback Technique 28 2.2.5 The Proposed Broadband Active Balun 35 2.2.6 Overall Circuit Schematic and Simulation 46 2.3 Experimental Results and Discussions 53 2.3.1 DC Operating Point 53 2.3.2 3-port and 2-port S-parameter Measurement 55 2.3.3 Noise Figure Measurement 59 2.3.4 Large-Signal Measurement 60 2.4 Summary 60 Chapter 3 A Broadband Transformer-Based Power Amplifier in 65-nm CMOS Process for 5G Communication 62 3.1 Introduction 62 3.1.1 Distributed Amplifiers 63 3.1.2 Balance Amplifiers 64 3.1.3 Wideband Matching Networks 65 3.1.4 Summary of Wideband Matching Topologies 65 3.2 Circuit Design 66 3.2.1 Block Diagram and power budget 66 3.2.2 Device Size and Bias Selection 67 3.2.3 Neutralization Technique 69 3.2.4 Load-pull Simulation for Wideband Operation 71 3.2.5 The Proposed Broadband Matching Network 73 3.2.6 Overall Wideband High Output Power PA 81 3.3 Experimental Results and Discussions 86 3.3.1 DC Operating Point 86 3.3.2 S-parameters Measurements 87 3.3.3 Large-signal Measurements 88 3.3.4 Digital Modulation Measurement 90 3.4 Summary 95 Chapter 4 Conclusion 98 REFERENCE 99 | |
dc.language.iso | en | |
dc.title | 應用於天文接收機之寬頻差動低雜訊放大器與應用於第五代行動通訊之寬頻功率放大器設計 | zh_TW |
dc.title | Design of Broadband Differential LNA for Radio Astronomy Receiver and Broadband PA for 5G Communication | en |
dc.type | Thesis | |
dc.date.schoolyear | 109-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃天偉(Tian-Wei Huang),蔡作敏(Zuo-Min Tsai),林坤佑(Kun-You Lin),章朝盛(Chau-Ching Chiong) | |
dc.subject.keyword | 平方公里陣列,高速電子遷移率電晶體,低雜訊放大器,第五代行動通訊,互補式金氧半導體,功率放大器, | zh_TW |
dc.subject.keyword | Square Kilometre Array (SKA),pHEMT,Low Noise Amplifier,Fifth-Generation Communication,CMOS,Power Amplifier, | en |
dc.relation.page | 105 | |
dc.identifier.doi | 10.6342/NTU202100506 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2021-02-05 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
U0001-0402202112501200.pdf | 4.91 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。