請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78132
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 吳乃立(Nae-Lih Wu) | |
dc.contributor.author | Pei-Sian Shao | en |
dc.contributor.author | 邵培賢 | zh_TW |
dc.date.accessioned | 2021-07-11T14:43:15Z | - |
dc.date.available | 2021-10-14 | |
dc.date.copyright | 2016-10-14 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-08-11 | |
dc.identifier.citation | [1] T. Nagaura and K. Tozawa, 'Lithium ion rechargeable battery', Prog. Batter. Sol. Cells, 9, 209-211 (1990)
[2] L. J. Fu, H. Liu, C. Li, Y. P. Wu, E. Rahm, R. Holze, and H. Q. Wu, 'Surface modifications of electrode materials for lithium ion batteries', Solid State Sciences, 8, 113-128 (2006) [3] B. Xu, D. Qian, Z. Wang, and Y. S. Meng, 'Recent progress in cathode materials research for advanced lithium ion batteries', Materials Science and Engineering: R: Reports, 73, 51-65 (2012) [4] C. M. Julien, A. Mauger, K. Zaghib, and H. Groult, 'Comparative Issues of Cathode Materials for Li-Ion Batteries', Inorganics, 2, 132-154 (2014) [5] N.-S. Choi, Z. Chen, S. A. Freunberger, X. Ji, Y.-K. Sun, K. Amine, G. Yushin, L. F. Nazar, J. Cho, and P. G. Bruce, 'Challenges Facing Lithium Batteries and Electrical Double-Layer Capacitors', Angewandte Chemie-International Edition, 51, 9994-10024 (2012) [6] J. M. Tarascon and M. Armand, 'Issues and challenges facing rechargeable lithium batteries', Nature, 414, 359-367 (2001) [7] R. M. Dell, 'Batteries - fifty years of materials development', Solid State Ionics, 134, 139-158 (2000) [8] M. S. Whittingham, 'Electrical Energy-Storage and Intercalation Chemistry', Science, 192, 1126-1127 (1976) [9] D. W. M. J. B. B. C. H. Steele, Materials for advanced batteries. Plenum Press.(1980) [10] D. W. Murphy, F. J. Disalvo, J. N. Carides, and J. V. Waszczak, 'Topochemical Reactions of Rutile Related Structures with Lithium', Mater. Res. Bull., 13, 1395-1402 (1978) [11] M. Lazzari and B. Scrosati, 'Cyclable Lithium Organic Electrolyte Cell Based on 2 Intercalation Electrodes', J. Electrochem. Soc., 127, 773-774 (1980) [12] T. N. K. Tozawa, 'Progress in batteries and solar cells', 9, 209 (1990) [13] P. V. J. N. M. G. K. Shenoy, Fast ion transport in solids : electrodes, and electrolytes - Conference proceedings. North Holland. p. 131-136,(1979) [14] I. E. Kelly, J. R. Owen, and B. C. H. Steele, 'Poly(Ethylene Oxide) Electrolytes for Operation at near Room-Temperature', J. Power Sources, 14, 13-21 (1985) [15] J. M. Tarascon, A. S. Gozdz, C. Schmutz, F. Shokoohi, and P. C. Warren, 'Performance of Bellcore's plastic rechargeable Li-ion batteries', Solid State Ionics, 86-8, 49-54 (1996) [16] D. Guyomard, 'New Trends in Electrochemical Technology: Energy Storage Systems for Electronics', Gordon & Breach Science, 9, 253–350 (2000) [17] M. S. Islam and C. A. J. Fisher, 'Lithium and sodium battery cathode materials: computational insights into voltage, diffusion and nanostructural properties', Chem Soc Rev, 43, 185-204 (2014) [18] A. K. Padhi, K. S. Nanjundaswamy, and J. B. Goodenough, 'Phospho-olivines as positive-electrode materials for rechargeable lithium batteries', Journal of the Electrochemical Society, 144, 1188-1194 (1997) [19] V. A. Streltsov, E. L. Belokoneva, V. G. Tsirelson, and N. K. Hansen, 'Multipole Analysis of the Electron-Density in Triphylite, Lifepo4, Using X-Ray-Diffraction Data', Acta Crystallogr B, 49, 147-153 (1993) [20] C. Masquelier, A. K. Padhi, K. S. Nanjundaswamy, and J. B. Goodenough, 'New cathode materials for rechargeable lithium batteries: The 3-D framework structures Li3Fe2(XO4)3 (X = P, As)', J Solid State Chem, 135, 228-234 (1998) [21] A. K. Padhi, K. S. Nanjundaswamy, C. Masquelier, S. Okada, and J. B. Goodenough, 'Effect of structure on the Fe3+/Fe2+ redox couple in iron phosphates', Journal of the Electrochemical Society, 144, 1609-1613 (1997) [22] A. Guerfi, M. Kaneko, M. Petitclerc, M. Mori, and K. Zaghib, 'LiFePO4 water-soluble binder electrode for Li-ion batteries', J Power Sources, 163, 1047-1052 (2007) [23] A. S. Andersson, B. Kalska, L. Haggstrom, and J. O. Thomas, 'Lithium extraction/insertion in LiFePO4: an X-ray diffraction and Mossbauer spectroscopy study', Solid State Ionics, 130, 41-52 (2000) [24] C. Delacourt, L. Laffont, R. Bouchet, C. Wurm, J. B. Leriche, M. Morcrette, J. M. Tarascon, and C. Masquelier, 'Toward understanding of electrical limitations (electronic, ionic) in LiMPO4 (M = Fe, Mn) electrode materials', Journal of the Electrochemical Society, 152, A913-A921 (2005) [25] Z. L. Gong and Y. Yang, 'Recent advances in the research of polyanion-type cathode materials for Li-ion batteries', Energ Environ Sci, 4, 3223-3242 (2011) [26] G. Amatucci, A. Du Pasquier, A. Blyr, T. Zheng, and J. M. Tarascon, 'The elevated temperature performance of the LiMn2O4/C system: failure and solutions', Electrochimica Acta, 45, 255-271 (1999) [27] Y. M. Lin, H. C. Wu, Y. C. Yen, Z. Z. Guo, M. H. Yang, H. M. Chen, H. S. Sheu, and N. L. Wu, 'Enhanced high-rate cycling stability of LiMn2O4 cathode by ZrO2 coating for Li-ion battery', Journal of the Electrochemical Society, 152, A1526-A1532 (2005) [28] C. Liu, Z. G. Neale, and G. Cao, 'Understanding electrochemical potentials of cathode materials in rechargeable batteries', Materials Today, 19, 109-123 (2016) [29] D. H. Jang and S. M. Oh, 'Electrolyte effects on spinel dissolution and cathodic capacity losses in 4 v Li/LixMn2O4 rechargeable cells', J. Electrochem. Soc., 144, 3342-3348 (1997) [30] Y. Dai, L. Cai, and R. E. White, 'Capacity Fade Model for Spinel LiMn2O4 Electrode', J. Electrochem. Soc., 160, A182-A190 (2013) [31] J. B. Goodenough and Y. Kim, 'Challenges for Rechargeable Li Batteries', Chem Mater, 22, 587-603 (2010) [32] K. Mizushima, P. C. Jones, P. J. Wiseman, and J. B. Goodenough, 'Lixcoo2 '(Oless-Thanxless-Than-or-Equal-To1) - a New Cathode Material for Batteries of High-Energy Density', Mater Res Bull, 15, 783-789 (1980) [33] H. Gabrisch, R. Yazami, and B. Fultz, 'The character of dislocations in LiCoO2', Electrochemical and Solid State Letters, 5, A111-A114 (2002) [34] J. N. Reimers and J. R. Dahn, 'Electrochemical and Insitu X-Ray-Diffraction Studies of Lithium Intercalation in LixCoO2', Journal of the Electrochemical Society, 139, 2091-2097 (1992) [35] T. Ohzuku and A. Ueda, 'Solid-State Redox Reactions of Licoo2 (R(3)over-Bar-M) for 4 Volt Secondary Lithium Cells', Journal of the Electrochemical Society, 141, 2972-2977 (1994) [36] Y. J. Kim, T. J. Kim, J. W. Shin, B. Park, and J. P. Cho, 'The effect of Al2O3 coating on the cycle life performance in thin-film LiCoO2 cathodes', Journal of the Electrochemical Society, 149, A1337-A1341 (2002) [37] L. J. Liu, L. Q. Chen, X. J. Huang, X. Q. Yang, W. S. Yoon, H. S. Lee, and J. McBreen, 'Electrochemical and in situ synchrotron XRD studies on Al2O3-coated LiCoO2 cathode material', Journal of the Electrochemical Society, 151, A1344-A1351 (2004) [38] K. Y. Chung, W. S. Yoon, J. McBreen, X. Q. Yang, S. H. Oh, H. C. Shin, W. Il Cho, and B. W. Cho, 'Structural studies on the effects of ZrO2 coating on LiCoO2 during cycling using in situ X-ray diffraction technique', Journal of the Electrochemical Society, 153, A2152-A2157 (2006) [39] C. Delmas, M. Menetrier, L. Croguennec, I. Saadoune, A. Rougier, C. Pouillerie, G. Prado, M. Grune, and L. Fournes, 'An overview of the Li(Ni,M)O2 systems: syntheses, structures and properties', Electrochimica Acta, 45, 243-253 (1999) [40] W. Li, J. C. Currie, and J. Wolstenholme, 'Influence of morphology on the stability of LiNiO2', J Power Sources, 68, 565-569 (1997) [41] T. Ohzuku, A. Ueda, and M. Kouguchi, 'Synthesis and characterization of LiAl1/4Ni3/4O2 (R(3)over-bar-m) for lithium-ion (shuttlecock) batteries', Journal of the Electrochemical Society, 142, 4033-4039 (1995) [42] L. Croguennec, P. Deniard, and R. Brec, 'Electrochemical cyclability of orthorhombic LiMnO2 - Characterization of cycled materials', J. Electrochem. Soc., 144, 3323-3330 (1997) [43] B. Ammundsen and J. Paulsen, 'Novel lithium-ion cathode materials based on layered manganese oxides', Advanced Materials, 13, 943 (2001) [44] J. Reed, G. Ceder, and A. Van der Ven, 'Layered-to-spinel phase transition in LixMnO2', Electrochemical and Solid State Letters, 4, A78-A81 (2001) [45] Y. I. Jang, B. Y. Huang, Y. M. Chiang, and D. R. Sadoway, 'Stabilization of LiMnO2 in the alpha-NaFeO2 structure type by LiAlO2 addition', Electrochemical and Solid State Letters, 1, 13-16 (1998) [46] Y. M. Chiang, D. R. Sadoway, Y. I. Jang, B. Y. Huang, and H. F. Wang, 'High capacity, temperature-stable lithium aluminum manganese oxide cathodes for rechargeable batteries', Electrochemical and Solid State Letters, 2, 107-110 (1999) [47] I. J. Davidson, R. S. McMillan, and J. J. Murray, 'RECHARGEABLE CATHODES BASED ON LI2CRXMN2-XO4', J. Power Sources, 54, 205-208 (1995) [48] M. E. Spahr, P. Novak, B. Schnyder, O. Haas, and R. Nesper, 'Characterization of layered lithium nickel manganese oxides synthesized by a novel oxidative coprecipitation method and their electrochemical performance as lithium insertion electrode materials', Journal of the Electrochemical Society, 145, 1113-1121 (1998) [49] N. Yabuuchi and T. Ohzuku, 'Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries', J Power Sources, 119, 171-174 (2003) [50] I. Saadoune and C. Delmas, 'On the LixNi0.8Co0.2O2 system', J Solid State Chem, 136, 8-15 (1998) [51] E. Rossen, C. D. W. Jones, and J. R. Dahn, 'Structure and Electrochemistry of Lixmnyni1-Yo2', Solid State Ionics, 57, 311-318 (1992) [52] C. Pouillerie, F. Perton, P. Biensan, J. P. Peres, M. Broussely, and C. Delmas, 'Effect of magnesium substitution on the cycling behavior of lithium nickel cobalt oxide', J Power Sources, 96, 293-302 (2001) [53] Z. L. Liu, A. S. Yu, and J. Y. Lee, 'Synthesis and characterization of LiNi1-x-yCoxMnyO2 as the cathode materials of secondary lithium batteries', J Power Sources, 81, 416-419 (1999) [54] T. Ohzuku and Y. Makimura, 'Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries', Chemistry Letters, 642-643 (2001) [55] K. M. Shaju, G. V. S. Rao, and B. V. R. Chowdari, 'Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries', Electrochim. Acta, 48, 145-151 (2002) [56] Z. Wu, X. Han, J. Zheng, Y. Wei, R. Qiao, F. Shen, J. Dai, L. Hu, K. Xu, Y. Lin, W. Yang, and F. Pan, 'Depolarized and Fully Active Cathode Based on Li(Ni0.5Co0.2Mn0.3)O2 Embedded in Carbon Nanotube Network for Advanced Batteries', Nano Letters, 14, 4700-4706 (2014) [57] J. Li, R. Yao, and C. Cao, 'LiNi1/3Co1/3Mn1/3O2 Nanoplates with {010} Active Planes Exposing Prepared in Polyol Medium as a High-Performance Cathode for Li-Ion Battery', ACS Appl. Mater. Interfaces, 6, 5075-5082 (2014) [58] Z. H. Lu, D. D. MacNeil, and J. R. Dahn, 'Layered cathode materials Li[NixLi(1/3-2x/3)Mn(2/3-x/3)]O2 for lithium-ion batteries', Electrochem. Solid State Lett., 4, A191-A194 (2001) [59] M. M. Thackeray, C. S. Johnson, J. T. Vaughey, N. Li, and S. A. Hackney, 'Advances in manganese-oxide 'composite' electrodes for lithium-ion batteries', J Mater Chem, 15, 2257-2267 (2005) [60] M. M. Thackeray, S. H. Kang, C. S. Johnson, J. T. Vaughey, R. Benedek, and S. A. Hackney, 'Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries', J. Mater. Chem., 17, 3112-3125 (2007) [61] X. T. Guan, B. Ding, X. F. Liu, J. J. Zhu, C. H. Mi, and X. G. Zhang, 'Enhancing the electrochemical performance of Li1.2Ni0.2Mn0.6O2 by surface modification with nickel-manganese composite oxide', J Solid State Electr, 17, 2087-2093 (2013) [62] C. S. Johnson, N. C. Li, C. Lefief, J. T. Vaughey, and M. M. Thackeray, 'Synthesis, Characterization and Electrochemistry of Lithium Battery Electrodes: xLi2MnO3 · (1-x)LiMn0.333Ni0.333Co0.333O2 (0 <= x <= 0.7)', Chem Mater, 20, 6095-6106 (2008) [63] B. Ammundsen, J. Paulsen, I. Davidson, R. S. Liu, C. H. Shen, J. M. Chen, L. Y. Jang, and J. F. Lee, 'Local structure and first cycle redox mechanism of layered Li1.2Cr0.4Mn0.4O2 cathode material', Journal of the Electrochemical Society, 149, A431-A436 (2002) [64] C. J. Pan, Y. J. Lee, B. Ammundsen, and C. P. Grey, '6Li MAS NMR studies of the local structure and electrochemical properties of Cr-doped lithium manganese and lithium cobalt oxide cathode materials for lithium-ion batteries', Chem Mater, 14, 2289-2299 (2002) [65] J. Bareno, M. Balasubramanian, S. H. Kang, J. G. Wen, C. H. Lei, S. V. Pol, I. Petrov, and D. P. Abraham, 'Long-Range and Local Structure in the Layered Oxide Li1.2Co0.4Mn0.4O2', Chem Mater, 23, 2039-2050 (2011) [66] C. H. Lei, J. Bareno, J. G. Wen, I. Petrov, S. H. Kang, and D. P. Abraham, 'Local structure and composition studies of Li1.2Ni0.2Mn0.6O2 by analytical electron microscopy', J Power Sources, 178, 422-433 (2008) [67] M. Gu, I. Belharouak, A. Genc, Z. G. Wang, D. P. Wang, K. Amine, F. Gao, G. W. Zhou, S. Thevuthasan, D. R. Baer, J. G. Zhang, N. D. Browning, J. Liu, and C. M. Wang, 'Conflicting Roles of Nickel in Controlling Cathode Performance in Lithium Ion Batteries', Nano Lett, 12, 5186-5191 (2012) [68] J. Bareno, C. H. Lei, J. G. Wen, S. H. Kang, I. Petrov, and D. P. Abraham, 'Local Structure of Layered Oxide Electrode Materials for Lithium-Ion Batteries', Adv Mater, 22, 1122-1127 (2010) [69] A. Boulineau, L. Simonin, J. F. Colin, E. Canevet, L. Daniel, and S. Patoux, 'Evolutions of Li1.2Mn0.61Ni0.18Mg0.01O2 during the Initial Charge/Discharge Cycle Studied by Advanced Electron Microscopy', Chem Mater, 24, 3558-3566 (2012) [70] B. Xu, C. R. Fell, M. F. Chi, and Y. S. Meng, 'Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study', Energ Environ Sci, 4, 2223-2233 (2011) [71] J. G. Wen, J. Bareno, C. H. Lei, S. H. Kang, M. Balasubramanian, I. Petrov, and D. P. Abraham, 'Analytical electron microscopy of Li1.2Co0.4Mn0.4O2 for lithium-ion batteries', Solid State Ionics, 182, 98-107 (2011) [72] H. Koga, L. Croguennec, P. Mannessiez, M. Menetrier, F. Weill, L. Bourgeois, M. Duttine, E. Suard, and C. Delmas, 'Li1.20Mn0.54Co0.13Ni0.13O2 with Different Particle Sizes as Attractive Positive Electrode Materials for Lithium-Ion Batteries: Insights into Their Structure', J Phys Chem C, 116, 13497-13506 (2012) [73] K. A. Jarvis, Z. Q. Deng, L. F. Allard, A. Manthiram, and P. J. Ferreira, 'Atomic Structure of a Lithium-Rich Layered Oxide Material for Lithium-Ion Batteries: Evidence of a Solid Solution', Chem Mater, 23, 3614-3621 (2011) [74] W. S. Yoon, N. Kim, X. Q. Yang, J. McBreen, and C. P. Grey, '6Li MAS NMR and in situ X-ray studies of lithium nickel manganese oxides', J Power Sources, 119, 649-653 (2003) [75] J. Breger, M. Jiang, N. Dupre, Y. S. Meng, Y. Shao-Horn, G. Ceder, and C. P. Grey, 'High-resolution X-ray diffraction, DIFFaX, NMR and first principles study of disorder in the Li2MnO3-Li[Ni1/2Mn1/2]O2 solid solution', J Solid State Chem, 178, 2575-2585 (2005) [76] S. H. Kang, P. Kempgens, S. Greenbaum, A. J. Kropf, K. Amine, and M. M. Thackeray, 'Interpreting the structural and electrochemical complexity of 0.5Li2MnO3·0.5LiMO2 electrodes for lithium batteries (M = Mn0.5-xNi0.5-xCo2x, 0 <= x <= 0.5)', J Mater Chem, 17, 2069-2077 (2007) [77] M. M. Thackeray, S. H. Kang, C. S. Johnson, J. T. Vaughey, and S. A. Hackney, 'Comments on the structural complexity of lithium-rich Li1+xM1-xO2 electrodes (M = Mn, Ni, Co) for lithium batteries', Electrochem Commun, 8, 1531-1538 (2006) [78] T. Ohzuku, M. Nagayama, K. Tsuji, and K. Ariyoshi, 'High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries: toward rechargeable capacity more than 300 mA h g-1', J Mater Chem, 21, 10179-10188 (2011) [79] D. Mohanty, S. Kalnaus, R. A. Meisner, K. J. Rhodes, J. L. Li, E. A. Payzant, D. L. Wood, and C. Daniel, 'Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction', J Power Sources, 229, 239-248 (2013) [80] C. P. Grey, W. S. Yoon, J. Reed, and G. Ceder, 'Electrochemical activity of Li in the transition-metal sites of O3 Li[Li(1-2x)/3Mn(2-x)/3Nix]O2', Electrochem. Solid State Lett., 7, A290-A293 (2004) [81] K. Kang and G. Ceder, 'Factors that affect Li mobility in layered lithium transition metal oxides', Phys Rev B, 74, (2006) [82] M. M. Thackeray, W. I. F. David, P. G. Bruce, and J. B. Goodenough, 'Lithium Insertion into Manganese Spinels', Mater Res Bull, 18, 461-472 (1983) [83] K. Shizuka, T. Kobayashi, K. Okahara, K. Okamoto, S. Kanzaki, and R. Kanno, 'Characterization of Li1+yNixCo1-2xMnxO2 positive active materials for lithium ion batteries', J Power Sources, 146, 589-593 (2005) [84] A. Rougier, P. Gravereau, and C. Delmas, 'Optimization of the composition of the Li1-zNi1+zO2 electrode materials: Structural, magnetic, and electrochemical studies', Journal of the Electrochemical Society, 143, 1168-1175 (1996) [85] Z. H. Lu, L. Y. Beaulieu, R. A. Donaberger, C. L. Thomas, and J. R. Dahn, 'Synthesis, structure, and electrochemical behavior of Li[NixLi1/3-2x/3Mn2/3-x/3]O2', Journal of the Electrochemical Society, 149, A778-A791 (2002) [86] L. Y. Yu, W. H. Qiu, F. Lian, J. Y. Huang, and X. L. Kang, 'Understanding the phenomenon of increasing capacity of layered 0.65Li[Li1/3Mn2/3]O2· 0.35Li(Ni1/3Co1/3Mn1/3)O2', J Alloy Compd, 471, 317-321 (2009) [87] A. R. Armstrong, M. Holzapfel, P. Novak, C. S. Johnson, S. H. Kang, M. M. Thackeray, and P. G. Bruce, 'Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O2', J Am Chem Soc, 128, 8694-8698 (2006) [88] M. Lu, H. Cheng, and Y. Yang, 'A comparison of solid electrolyte interphase (SEI) on the artificial graphite anode of the aged and cycled commercial lithium ion cells', Electrochim. Acta, 53, 3539-3546 (2008) [89] S.-H. Lee, H.-G. You, K.-S. Han, J. Kim, I.-H. Jung, and J.-H. Song, 'A new approach to surface properties of solid electrolyte interphase on a graphite negative electrode', J. Power Sources, 247, 307-313 (2014) [90] T. Joshi, K. Eom, G. Yushin, and T. F. Fuller, 'Effects of Dissolved Transition Metals on the Electrochemical Performance and SEI Growth in Lithium-Ion Batteries', J. Electrochem. Soc., 161, A1915-A1921 (2014) [91] H. Zheng, Q. Sun, G. Liu, X. Song, and V. S. Battaglia, 'Correlation between dissolution behavior and electrochemical cycling performance for LiNi1/3Co1/3Mn1/3O2-based cells', J. Power Sources, 207, 134-140 (2012) [92] W. Liu, P. Oh, X. Liu, M.-J. Lee, W. Cho, S. Chae, Y. Kim, and J. Cho, 'Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries', Angewandte Chemie-International Edition, 54, 4440-4457 (2015) [93] Y. Lyu, Y. Liu, and L. Gu, 'Surface structure evolution of cathode materials for Li-ion batteries', Chinese Physics B, 25, (2016) [94] M. Cheng, W. P. Tang, Y. Li, and K. J. Zhu, 'Study on compositions and changes of SEI film of Li2MnO3 positive material during the cycles', Catalysis Today, 274, 116-122 (2016) [95] P. K. Nayak, J. Grinblat, M. Levi, Y. Wu, B. Powell, and D. Aurbach, 'TEM and Raman spectroscopy evidence of layered to spinel phase transformation in layered LiNi1/3Mn1/3Co1/3O2 upon cycling to higher voltages', Journal of Electroanalytical Chemistry, 733, 6-19 (2014) [96] F. Wu, N. Li, Y. Su, H. Shou, L. Bao, W. Yang, L. Zhang, R. An, and S. Chen, 'Spinel/Layered Heterostructured Cathode Material for High-Capacity and High-Rate Li-Ion Batteries', Advanced Materials, 25, 3722-3726 (2013) [97] F. Lin, I. M. Markus, D. Nordlund, T.-C. Weng, M. D. Asta, H. L. Xin, and M. M. Doeff, 'Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries', Nature Communications, 5, (2014) [98] M. Gu, I. Belharouak, J. M. Zheng, H. M. Wu, J. Xiao, A. Genc, K. Amine, S. Thevuthasan, D. R. Baer, J. G. Zhang, N. D. Browning, J. Liu, and C. M. Wang, 'Formation of the Spinel Phase in the Layered Composite Cathode Used in Li-Ion Batteries', ACS Nano, 7, 760-767 (2013) [99] N. Yabuuchi, K. Yoshii, S.-T. Myung, I. Nakai, and S. Komaba, 'Detailed Studies of a High-Capacity Electrode Material for Rechargeable Batteries, Li2MnO3-LiCo1/3Ni1/3Mn1/3O2', Journal of the American Chemical Society, 133, 4404-4419 (2011) [100] S. Komaba, N. Kumagai, and Y. Kataoka, 'Influence of manganese(II), cobalt(II), and nickel(II) additives in electrolyte on performance of graphite anode for lithium-ion batteries', Electrochim. Acta, 47, 1229-1239 (2002) [101] H. Tsunekawa, S. Tanimoto, R. Marubayashi, M. Fujita, K. Kifune, and M. Sano, 'Capacity fading of graphite electrodes due to the deposition of manganese ions on them in Li-ion batteries', J. Electrochem. Soc., 149, A1326-A1331 (2002) [102] S. T. Myung, N. Kumagai, S. Komaba, and H. T. Chung, 'Effects of Al doping on the microstructure of LiCoO2 cathode materials', Solid State Ionics, 139, 47-56 (2001) [103] V. Subramanian and G. T. K. Fey, 'Preparation and characterization of LiNi0.7Co0.2Ti0.05M0.05O2 (M=Mg, Al and Zn) systems as cathode materials for lithium batteries', Solid State Ionics, 148, 351-358 (2002) [104] M. V. Reddy, T. W. Jie, C. J. Jafta, K. I. Ozoemena, M. K. Mathe, A. S. Nair, S. S. Peng, M. S. Idris, G. Balakrishna, F. I. Ezema, and B. V. R. Chowdari, 'Studies on Bare and Mg-doped LiCoO2 as a cathode material for Lithium ion Batteries', Electrochim. Acta, 128, 192-197 (2014) [105] S.-K. Hu, G.-H. Cheng, M.-Y. Cheng, B.-J. Hwang, and R. Santhanam, 'Cycle life improvement of ZrO2-coated spherical LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries', J. Power Sources, 188, 564-569 (2009) [106] A. M. Wise, C. Ban, J. N. Weker, S. Misra, A. S. Cavanagh, Z. Wu, Z. Li, M. S. Whittingham, K. Xu, S. M. George, and M. F. Toney, 'Effect of Al2O3 Coating on Stabilizing LiNi0.4Mn0.4Co0.2O2 Cathodes', Chemistry of Materials, 27, 6146-6154 (2015) [107] Y. Wu, A. V. Murugan, and A. Manthiram, 'Surface modification of high capacity layered Li Li0.2Mn0.54Ni0.13Co0.13O2 cathodes by AlPO4', J. Electrochem. Soc., 155, A635-A641 (2008) [108] J. Zhang, Z. Li, R. Gao, Z. Hu, and X. Liu, 'High Rate Capability and Excellent Thermal Stability of Li+-Conductive Li2ZrO3-Coated LiNi1/3Co1/3Mn1/3O2 via a Synchronous Lithiation Strategy', Journal of Physical Chemistry C, 119, 20350-20356 (2015) [109] L. Li, Z. Chen, L. Song, M. Xu, H. Zhu, L. Gong, and K. Zhang, 'Characterization and electrochemical performance of lithium-active titanium dioxide inlaid LiNi0.5Co0.2Mn0.3O2 material prepared by lithium residue-assisted method', Journal of Alloys and Compounds, 638, 77-82 (2015) [110] L. Li, Z. Chen, Q. Zhang, M. Xu, X. Zhou, H. Zhu, and K. Zhang, 'A hydrolysis-hydrothermal route for the synthesis of ultrathin LiAlO2-inlaid LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium ion batteries', Journal of Materials Chemistry A, 3, 894-904 (2015) [111] Y. Cho, S. Lee, Y. Lee, T. Hong, and J. Cho, 'Spinel-Layered Core-Shell Cathode Materials for Li-Ion Batteries', Advanced Energy Materials, 1, 821-828 (2011) [112] Y. Cho, P. Oh, and J. Cho, 'A New Type of Protective Surface Layer for High-Capacity Ni-Based Cathode Materials: Nanoscaled Surface Pillaring Layer', Nano Letters, 13, 1145-1152 (2013) [113] J. H. Park, J. H. Cho, S. B. Kim, W. S. Kim, S. Y. Lee, and S. Y. Lee, 'A novel ion-conductive protection skin based on polyimide gel polymer electrolyte: application to nanoscale coating layer of high voltage LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium-ion batteries', J. Mater. Chem., 22, 12574-12581 (2012) [114] X. Liu, H. Li, D. Li, M. Ishida, and H. Zhou, 'PEDOT modified LiNi1/3Co1/3Mn1/3O2 with enhanced electrochemical performance for lithium ion batteries', J. Power Sources, 243, 374-380 (2013) [115] G. T. K. Fey, C. S. Chang, and T. P. Kumar, 'Synthesis and surface treatment of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries', Journal of Solid State Electrochemistry, 14, 17-26 (2010) [116] S. J. Shi, J. P. Tu, Y. Y. Tang, X. Y. Liu, Y. Q. Zhang, X. L. Wang, and C. D. Gu, 'Enhanced cycling stability of Li Li0.2Mn0.54Ni0.13Co0.13O2 by surface modification of MgO with melting impregnation method', Electrochim. Acta, 88, 671-679 (2013) [117] B. C. Smith, 'Fundamentals of Fourier Transform Infrared Spectroscopy,CRC Press, Boca Raton', (1996) [118] M. Gu, I. Belharouak, J. Zheng, H. Wu, J. Xiao, A. Genc, K. Amine, S. Thevuthasan, D. R. Baer, J.-G. Zhang, N. D. Browning, J. Liu, and C. Wang, 'Formation of the Spinel Phase in the Layered Composite Cathode Used in Li-Ion Batteries', Acs Nano, 7, 760-767 (2013) [119] C. S. Johnson, J. S. Kim, C. Lefief, N. Li, J. T. Vaughey, and M. M. Thackeray, 'The significance of the Li2MnO3 component in 'composite' xLi2MnO3 · (1-x)LiMn0.5Ni0.5O2 electrodes', Electrochemistry Communications, 6, 1085-1091 (2004) [120] J. Cho, Y. J. Kim, and B. Park, 'Novel LiCoO2 cathode material with Al2O3 coating for a Li ion cell', Chemistry of Materials, 12, 3788-3791 (2000) [121] Z. H. Chen and J. R. Dahn, 'Effect of a ZrO2 coating on the structure and electrochemistry of LixCoO2 when cycled to 4.5 V', Electrochemical and Solid State Letters, 5, A213-A216 (2002) [122] Y. Kim, H. S. Kim, and S. W. Martin, 'Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries', Electrochim. Acta, 52, 1316-1322 (2006) [123] J. Song, X. Han, K. J. Gaskell, K. Xu, S. B. Lee, and L. Hu, 'Enhanced electrochemical stability of high-voltage LiNi0.5Mn1.5O4 cathode by surface modification using atomic layer deposition', Journal of Nanoparticle Research, 16, (2014) [124] H.-M. Cheng, F.-M. Wang, J. P. Chu, R. Santhanam, J. Rick, and S.-C. Lo, 'Enhanced Cycleabity in Lithium Ion Batteries: Resulting from Atomic Layer Depostion of Al2O3 or TiO2 on LiCoO2 Electrodes', Journal of Physical Chemistry C, 116, 7629-7637 (2012) [125] Y. S. Jung, A. S. Cavanagh, A. C. Dillon, M. D. Groner, S. M. George, and S.-H. Lee, 'Enhanced Stability of LiCoO2 Cathodes in Lithium-Ion Batteries Using Surface Modification by Atomic Layer Deposition', J. Electrochem. Soc., 157, A75-A81 (2010) [126] X. Li, J. Liu, M. N. Banis, A. Lushington, R. Li, M. Cai, and X. Sun, 'Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application', Energy Environ. Sci., 7, 768-778 (2014) [127] Y. Itou and Y. Ukyo, 'Performance of LiNiCoO2 materials for advanced lithium-ion batteries', J. Power Sources, 146, 39-44 (2005) [128] I. Bloom, S. A. Jones, V. S. Battaglia, G. L. Henriksen, J. P. Christophersen, R. B. Wright, C. D. Ho, J. R. Belt, and C. G. Motloch, 'Effect of cathode composition on capacity fade, impedance rise and power fade in high-power, lithium-ion cells', J. Power Sources, 124, 538-550 (2003) [129] N. Yabuuchi and T. Ohzuku, 'Electrochemical behaviors of LiCo1/3Ni1/3Mn1/3O2 in lithium batteries at elevated temperatures', J. Power Sources, 146, 636-639 (2005) [130] P. Ramadass, B. Haran, R. White, and B. N. Popov, 'Capacity fade of Sony 18650 cells cycled at elevated temperatures Part I. Cycling performance', J. Power Sources, 112, 606-613 (2002) [131] H. Koga, L. Croguennec, M. Menetrier, P. Mannessiez, F. Weill, and C. Delmas, 'Different oxygen redox participation for bulk and surface: A possible global explanation for the cycling mechanism of Li1.20Mn0.54CO0.13Ni0.13O2', J. Power Sources, 236, 250-258 (2013) [132] Y. Wu, C. Cao, Y. Zhu, J. Li, and L. Wang, 'Cube-shaped hierarchical LiNi1/3Co1/3Mn1/3O2 with enhanced growth of nanocrystal planes as high-performance cathode materials for lithium-ion batteries', Journal of Materials Chemistry A, 3, 15523-15528 (2015) [133] C. Zhan, J. Lu, A. J. Kropf, T. Wu, A. N. Jansen, Y.-K. Sun, X. Qiu, and K. Amine, 'Mn(II) deposition on anodes and its effects on capacity fade in spinel lithium manganate-carbon systems', Nature Communications, 4, (2013) [134] J. Kasnatscheew, M. Evertz, B. Streipert, R. Wagner, R. Kloepsch, B. Vortmann, H. Hahn, S. Nowak, M. Amereller, A. C. Gentschev, P. Lamp, and M. Winter, 'The truth about the 1st cycle Coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes', Physical Chemistry Chemical Physics, 18, 3956-3965 (2016) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78132 | - |
dc.description.abstract | 層狀鋰離子三元系過渡金屬氧化物 LiNixCoyMn1-x-yO2 以及層狀富鋰錳基過渡金屬氧化物材料xLi2MnO3•(1-x)Li(Mn, M)O2 (M= Mn, Ni, Co),此系列之材料具有甚高的比電容量、熱穩定性、低成本與毒性小的優點,使它們成為鋰離子電池中頗具發展性的正極材料。然而,它們的循環壽命穩定性卻會隨著操作溫度的增加而導致嚴重的劣化, 較高的操作溫度會使固態電解液介面層上,電解液與電極材料間的交互作用更激烈,因而導致固態電解液介面層急速的生成於電極表面,除了造成電池內阻抗的增加外也會造成過渡金屬的溶出。
在本研究中,有別於傳統的方式,吾人發展了一套新穎且簡單的製程,藉由高分子人造固態電解液介面層來對正極材料進行表面改質,進而提升鋰離子電池在高溫環境下循環與充放速率的表現。在本實驗中,兩種不同的方式應用在正極材料的表面改質上,且數種高分子與高分子摻合物被選用作為鋰離子正極材料表面改質的原料以達到提升鋰離子電池在高溫下操作的性能 在第一個方法中,聚四氟乙烯亦為熟知的鐵氟龍被選用作為表面改質劑,而此高分子對正極材料的表面改質是應用在富鋰鎳錳氧化物的電極極板,並且藉由電漿輔助化學氣相層析的製程將鐵氟龍鍍於極板上。在本實驗中,經不同層積時間處理的極板會組成鈕扣型半電池進行性能測試。其對電性表現的影響亦會在此研究中討論。 在第二個方法中,正極材料的表面改質會直接在層狀鋰離子三元系過渡金屬氧化物的粉體上進行修飾,並藉由水系的批覆製程,將離子型高分子如聚苯乙烯磺酸基以及聚二烯丙基二甲基氯化銨高分子批覆於粉體表面。此外,為了增加經高分子批覆之金屬氧化物材料的電子導電性,導電性添加劑如Super P以及奈米碳管亦會參與於高分子披覆的製程。在本實驗中,材料在電化學操作前後的表面型態與結構變化都會加以檢視以及進一步的分析與研究來了解高分子披覆的影響。 結果顯示,吾人所建構之人造高分子固態電解液介面層能夠大幅的抑制電極材料與電解液間的劣化反應,進而增進材料的結構穩定性,並在電化學操作過程中,降低電極材料的極化效應。相較於未經改質的材料,改質後的材料在循環壽命以及充放速率的電性表現上都有較佳的結果,並且,因為有效的降低電解液的分解以及提升材料的結構穩定性,改質後的材料,其半電池也能因而保有較低的內部阻抗。 最後在這些提升電池性能表現的後面,其原理以及機制亦會在此研究中進一步的討論。 | zh_TW |
dc.description.abstract | Layered lithium ternary transition metal oxides, LiNixCoyMn1-x-yO2 (abbreviated as NCM) and the layered lithium-rich manganese-transition metal oxide composites cathode, xLi2MnO3•(1-x)Li(Mn, M)O2 (M= Mn, Ni, Co) (abbreviated as LrMOs), are important cathode materials for lithium ion batteries because of their high specific capacity, thermal stability, lower cost, and less toxicity. However, their cycle life deteriorates rapidly with increasing operating temperature, because of strong interaction at the solid-electrolyte interface causing rapid solid-electrolyte-interphase (SEI) formation and dissolution of the transitional metal ions.
In this research, distinct from traditional methods, a novel simple approach is developed using polymeric artificial SEIs (A-SEIs) to modify the surface of cathode materials to enhance the cyclic and rate performance of Li-ion batteries at the elevated temperatures. Two different modification approaches were applied to modify the cathode surfaces and various polymeric blends were employed to promote the cell performance at the elevated temperature. In the first approach, the surface modification was performed on the surface of the electrode using plasma enhanced chemical vapor deposition (PECVD) process. Polytetrafluoroethene known as Teflon was selected for the deposition on electrodes and the lithium-rich Nickel-Manganese Oxide (LrMNO) electrodes were adopted for the modification. PECVD deposition time on electrodes was varied and their impact on the electrochemical performance discussed in detail. In the second approach, the modification was directly conducted onto the NCM particles. Here, the polymeric coating was achieved using water-based coating process with polystyrene sulfonate-based polymers (PSS) and Poly dially dimethyl ammonium chloride (PDDA). Conductive additives such as Super P and carbon nanotube (CNT) were incorporated into the coating procedure for the purpose of improving the conductivity loss due to the polymeric coating on the metal oxide materials. Impact of polymeric coating on materials were examined by investigating structure and morphological changes before and after the electrochemical operations. The result showed that the polymeric artificial SEIs could substantially suppress the side reactions between the electrolyte and electrode, improve the structural stability and decrease the polarization of the material during the electrochemical operations. Compared to the pristine cell, the modified cells showed better performance both in terms of cycle life and rate capability, maintained lower cell impedance due to the reduced electrolyte decomposition and enhanced structure stability. | en |
dc.description.provenance | Made available in DSpace on 2021-07-11T14:43:15Z (GMT). No. of bitstreams: 1 ntu-105-R03524055-1.pdf: 9910290 bytes, checksum: 550d22ce19d95de928bdc238f6ec2e76 (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 致謝 I
摘要 III Abstract V Table of Contents VII List of Tables X List of Figures XII Chapter 1 Introduction 1 Chapter 2 Literature Review 3 2-1 Features of Rechargeable Lithium-ion Batteries 3 2-1-1 Basic Concepts of Lithium-ion Batteries 3 2-1-2 Developments of Lithium Batteries 6 2-2 Introduction to Cathode Materials for Li-ion Batteries 9 2-2-1 Olivine Structure 9 2-2-2 Spinel Structure 12 2-2-3 Layered Structure 14 2-3 Surface Evolution of Cathode Materials for Li-ion Batteries 23 2-3-1 Formation of Solid Electrolyte Interphase 23 2-3-2 Phase transformation of Layered Structure Cathode 26 2-3-3 Modification of Cathode Materials 28 Chapter 3 Experimental 35 3-1 Materials and Chemicals 35 3-2 Preparation of Poly (lithium 4-styrenesulfonate) 37 3-3 Polymeric Modification of Cathode Materials 38 3-3-1 Plasma Enhanced Chemical Vapor Deposition on Lithium-rich Nickel-Manganese Oxide Cathode Electrode 38 3-3-2 Single-polymeric Coating on Lithium Nickel-Cobalt-Manganese Dioxide Powder 40 3-3-3 Multi-polymeric Coating on Lithium Nickel-Cobalt-Manganese Dioxide Powder 42 3-3-4 Preparation of 1%-Super P-PSSNa @ NCM-PDDA Composites 44 3-3-5 Preparation of Carbon Nanotube Wrapped and Polymer Coated Lithium Nickel-Cobalt-Manganese Dioxide Powder 46 3-4 Material Characterizations and Analyses 48 3-4-1 Microscopy 48 3-4-2 X-ray Diffraction 49 3-4-3 X-ray Absorption Spectroscopy 49 3-4-4 Zeta Potential 50 3-4-5 Fourier Transform Infrared Spectroscopy 50 3-4-6 Inductively Coupled Plasma Analysis 51 3-5 Electrochemical Characterization 54 3-5-1 Preparation of Electrodes 54 3-5-2 Cell-Fabricating Process 54 3-5-3 Charge/Discharge Test 56 3-5-4 Electrochemical Impedance Spectroscopy 56 Chapter 4 Plasma Enhanced Chemical Vapor Deposition on Lithium-rich Nickel-Manganese Oxide Cathode Electrode 57 4-1 Introduction 57 4-2 Temperature Determination for Elevated Temperature Test 59 4-3 Characterization of PECVD Treated Lithium-rich Nickel-Manganese Oxide Cathode Electrode 66 4-4 Electrochemical Performance 69 Chapter 5 Polymeric Artificial SEI Modification on Li(NiCoMn)1/3O2 Cathode Material 83 5-1 Introduction 83 5-2 Polymer Modification on First Batch of NCM Powder: 86 5-2-1 Materials characterizations 86 5-2-2 Electrochemical Performance 93 5-2-3 Morphology and Surface Structure Evolution of Electrode 104 5-3 Polymer Modification on Second Batch of NCM Powder: 110 5-3-1 Materials characterizations 110 5-3-2 Electrochemical performance 116 5-3-3 Surface Morphology Evolution of Electrode 130 5-4 High Cut-off Potential Operation of NCM Cells 133 5-4-1 Electrochemical Performance 133 5-4-2 Structure Evolution of NCM Particles 142 Chapter 6 Conclusions 144 Reference 146 Appendix A 163 | |
dc.language.iso | en | |
dc.title | 建構與研究鋰離子電池正極鋰鎳鈷錳氧表面高分子固態-電解液介面層 | zh_TW |
dc.title | Construction of Polymeric Artificial Solid-Electrolyte-Interphases on LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium-ion Batteries | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳弘俊,方家振 | |
dc.subject.keyword | 鋰離子電池,層狀三元系過渡金屬氧化物,層狀富鋰氧化物,相轉變,固態電解質介面層,表面改質, | zh_TW |
dc.subject.keyword | Li-ion batteries,Li mixed transition metal oxides,Li-rich layered oxide,phase transformation,SEI,Surface modification, | en |
dc.relation.page | 176 | |
dc.identifier.doi | 10.6342/NTU201601970 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2016-08-12 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-R03524055-1.pdf 目前未授權公開取用 | 9.68 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。