請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78082
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳世銘 | |
dc.contributor.author | Kai-Jhong Huang | en |
dc.contributor.author | 黃楷中 | zh_TW |
dc.date.accessioned | 2021-07-11T14:41:40Z | - |
dc.date.available | 2021-11-02 | |
dc.date.copyright | 2016-11-02 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-08-19 | |
dc.identifier.citation | 行政院農委會。2004。蜜蜂攜帶花粉授粉技術。苗栗:行政院農委會苗栗區農業改良場。網址:http://www.mdais.gov.tw/mobile_view.php?catid=146。上網日期:2004/8/13。
吳登禎。2000。蜜蜂訊息-設施栽培利用蜜蜂授粉。苗栗區農情月刊4:4-5。 李青珍。2011。精選熊蜂在設施栽培番茄與草莓之授粉潛力評估。碩士論文。臺北:國立臺灣大學昆蟲學研究所。 李柔靜。2009。番茄採收機械視覺系統之研究。碩士論文。臺北:國立臺灣大學生物產業機電工程學研究所。 李繼宇、周志艷、胡煉、臧英、閆夢璐、劉愛民、羅錫文、張鐵民。2014A。單旋翼電動無人直升機輔助授粉作業參數優選。農業工程學報30(10):10-17。 李繼宇、周志艷、胡煉、臧英、徐賽、劉愛民、羅錫文、張鐵民。2014B。圓形多軸多旋翼電動無人機輔助授粉作業參數優選。農業工程學報30(11):1-9。 岳基隆、張慶杰、朱華勇。2010。微小型四旋翼無人機研究進展及關鍵技術淺析。電光與控制 17(10): 46-52。 林永祥。2011。以 SOWT 分析光學式動作擷取系統發展趨勢。2010年第三屆運動科學暨休閒遊憩管理學術研討會論文集 467 - 473。 林家鋒。2009。設施內番茄採收機器人系統之研究。宜蘭:國立宜蘭大學生物機電工程學研究所。 郭琇真。2015。番茄授粉不求人 進口熊蜂來做工 兼具生態指標。網址:https://www.newsmarket.com.tw/blog/70971/。上網日期:2015/6/10。 高永威、姜仁傑、何旭淜、馮堃齊、林念真、林群惟、郭倫嘉。2013。室內定位技術之探討與分析。電腦與通訊149:64-71。 黃慶三。2013。番茄的授粉。網址:http://www.washingtonchinesedailynews.com/index.php/en/dcnews/supportment/huangqingsan/513-sp-131024d10.html。上網日期:2013/9/2。 盧德鴻。2015。溫室精準栽培之光度感測飛行機器人之研究。碩士論文。臺北:國立臺灣大學生物產業機電工程學研究所。 Achtelik, M., T. Zhang, K. Kühnlenz, and M. Buss. 2009. Visual tracking and control of a quadcopter using a stereo camera system and inertial sensors. In Mechatronics and Automation, 2009. ICMA 2009. International Conference on. IEEE. Bitcraze. 2015. Getting started with the Crazyflie 2.0. https://www.bitcraze.io/getting-started-with-the-crazyflie-2-0/ Accessed 18 December 2015 Bitcraze Wiki. 2015. Crazyflie 2.0 System Architecture. Available at: https://wiki.bitcraze.io/projects:crazyflie2:architecture:index Accessed 15 July 2015 Bitcraze Wiki. 2016. Expansion decks. https://wiki.bitcraze.io/projects:crazyflie2: expansionboards:index Accessed 05 April 2016 Bouabdallah, S., M. Becker, and R. Siegwart. 2007. Autonomous miniature flying robots: coming soon!-research, development, and results. Robotics & Automation Magazine, IEEE 14(3):88-98. Bouabdallah, S., P. Murrieri, and R. Siegwart. 2005. Towards autonomous indoor micro VTOL. Autonomous Robots 18(2):171-183. Chirarattananon, P., K. Y. Ma, and R. J. Wood. 2013. Adaptive control for takeoff, hovering, and landing of a robotic fly. In Intelligent Robots and Systems (IROS), 2013 IEEE/RSJ International Conference on. IEEE. Cox-Foster, D. L., S. Conlan, E. C. Holmes, G. Palacios, J. D. Evans, N. A. Moran, P.-L. Quan, T. Briese, M. Hornig, and D. M. Geiser. 2007. A metagenomic survey of microbes in honey bee colony collapse disorder. Science 318(5848):283-287. Dao, T. X. 2013. Video-Guided Autonomous Pollinator Rotorcraft, Furci, M., G. Casadei, R. Naldi, R. Sanfelice, and L. Marconi. 2015. An open-source architecture for control and coordination of a swarm of micro-quadrotors. In Unmanned Aircraft Systems (ICUAS), 2015 International Conference on. IEEE. Garcia, A., E. Mattison, and K. Ghose. 2015. High-speed vision-based autonomous indoor navigation of a quadcopter. In Unmanned Aircraft Systems (ICUAS), 2015 International Conference on. IEEE. Hannan, M. W., and T. F. Burks. 2004. Current developments in automated citrus harvesting. In 2004 ASAE Annual Meeting. American Society of Agricultural and Biological Engineers. Hochmuth, G. 2013. Production of Greenhouse Tomatoes-Florida Greenhouse Vegetable Production Handbook, Vol 3. Jimenez, A., R. Ceres, and J. Pons. 2000. A survey of computer vision methods for locating fruit on trees. Transactions of the ASAE 43(6):1911. Kurosaki, H., H. Ohmori, and M. Takaichi. 2011. Development of an automatic fruit-set-reagent spraying robot for tomato plants to promote uniform fruit ripening. In International Symposium on Advanced Technologies and Management Towards Sustainable Greenhouse Ecosystems: Greensys2011 952. Kushleyev, A., D. Mellinger, C. Powers, and V. Kumar. 2013. Towards a swarm of agile micro quadrotors. Autonomous Robots 35(4):287-300. Mellinger, D., M. Shomin, N. Michael, and V. Kumar. 2013. Cooperative grasping and transport using multiple quadrotors. In Distributed autonomous robotic systems, 545-558. Springer. Regan, E. C., L. Santini, L. Ingwall‐King, M. Hoffmann, C. Rondinini, A. Symes, J. Taylor, and S. H. Butchart. 2015. Global trends in the status of bird and mammal pollinators. Conservation Letters. Roldán, J. J., G. Joossen, D. Sanz, J. del Cerro, and A. Barrientos. 2015. Mini-uav based sensory system for measuring environmental variables in greenhouses. Sensors 15(2):3334-3350. Saitoh, T., and T. Kaneko. 2000. Automatic recognition of wild flowers. In Pattern Recognition, 2000. Proceedings. 15th International Conference on. IEEE. Shaneyfelt, T., S. Agaian, M. Jamshidi, and S. Erdogan. 2011. Quaternion number based vanilla recognition system for automating polination. In System Science and Engineering (ICSSE), 2011 International Conference on. IEEE. Shapiro, A., E. Korkidi, A. Rotenberg, G. Furst, H. Namdar, B. Sapir, M. Mishkin, O. Ben-Shahar, and Y. Edan. 2008. A Robotic Prototype for Spraying and Pollinating Date Palm Trees. In ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers. Siah, C. J. D. 2014. Master-slave coordinated following of quad copters. Srisamosorn, V., N. Kuwahara, A. Yamashita, T. Ogata, and J. Ota. 2014. Automatic Face Tracking System using Quadrotors: Control by Goal Position Thresholding. In Proceedings of the IEEE International Conference on Robotics and Biomemetics (ROBIO 2014). Wood, R., R. Nagpal, and G.-Y. Wei. 2013. Flight of the Robobees. Scientific American 308(3):60-65. Yang, L., L. Zhang, H. Dong, A. Alelaiwi, and A. El Saddik. 2015. Evaluating and improving the depth accuracy of Kinect for Windows v2. Sensors Journal, IEEE 15(8):4275-4285. Zhang, X., M. Lok, T. Tong, S. Chaput, S. K. Lee, B. Reagen, H. Lee, D. Brooks, and G.-Y. Wei. 2015. A Multi-Chip System Optimized for Insect-Scale Flapping-Wing Robots. In VLSI Circuits (VLSI Circuits), 2015 Symposium on. IEEE. Zhang, Z. 2012. Microsoft kinect sensor and its effect. MultiMedia, IEEE 19(2):4-10. Zhao, D., A. Chowdhery, A. Kapoor, and S. Bahl. 2015. Games of drones: an affective game with cyber-physical systems. In Proceedings of the 14th International Conference on Information Processing in Sensor Networks. ACM. Zoricak, M., K. Androsiuk, and E. B. Madsen. 2013. DroneCharge: A Python Framework for Automated Quadcopter Charging. Feedback 2:6. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78082 | - |
dc.description.abstract | 近年來,蜂群衰竭失調症問題備受重視,同時授粉鳥類與哺乳類逐步面臨滅絕危機,有許多研究正在試圖釐清上述問題,亦有研究者開始尋找對應的授粉替代方案。而於溫網室設施中,授粉昆蟲無法進入,故需搭配人工授粉或購買授粉專用蜜蜂,然而人工授粉需要耗費人力、蜜蜂授粉效率高但仍存在一些限制。近幾年來的研究中,甚少有針對授粉飛行機器人的研究,尤其是仿昆蟲授粉、人工授粉等需要以實體元件接觸到花朵者,更是難以找尋。
因此,為填補飛行器授粉自動化研究實作上的空缺,以及探討飛行器是否可能用於花朵授粉的可能性,本研究以四軸飛行器搭載影像模組與輕量化授粉機構,研發可應用於花朵授粉自動化之授粉機器人系統。授粉機器人系統可分為四部分,授粉機器人、影像定位系統、決策控制系統、花朵辨識系統。研究中使用深度攝影機定位飛行器,進行飛行器座標的自動控制,並透過影像模組尋找並抵達花朵正上方,再根據面積對高度的關係式回歸出目標花朵座標,最後完成以授粉物件碰觸花面的授粉作業。本研究中飛行器於定點飛行時,於七重複的條件下,其距離誤差RMSE(均方根誤差)之平均值於X、Y、Z軸分別為4.96公分、2.97公分、4.29公分,飛行器座標與目標位置之絕對距離的RMSE值之平均值則為7.27公分,其代表於飛行器的控制穩定性上已有相當的水準。而授粉試驗中,授粉機器人從切換至自動模式後,至最終完成棉球碰觸花面的授粉作業,一共花費了24.71秒。 綜合以上,本研究成功的建立一套授粉機器人系統,授粉機器人能自動化辨識與計算花朵座標並執行授粉作業,同時研究中彙整出授粉機器人所需的技術與系統架構,至此確立了四軸飛行器應用於花朵授粉自動化的可行性。 | zh_TW |
dc.description.abstract | In recent years, the issue of Colony Collapse Disorder has received much attention; besides, pollinating birds and mammals also face the crisis of extinction in the same time. There are plenty of studies trying hard to clarify the above problem, and researchers also begin to look for alternative methods of pollination. Since pollinators will be prevented from entering greenhouses, artificial pollination or purchase of honey bees would be necessary to conduct the pollination work. While artificial pollination requires high labor force and purchase of honey bees has some limitations; there are very few studies regarding flying robots for pollination, especially those need physical contacts such as bionic pollination of insect and artificial pollination.
Therefore, for the development of automation of pollination implemented on flying robots and exploring its possibility, this study developed an automated robotic system for pollination of flowers using a quadcopter equipped with video module and lightweight pollinating device. The robotic system can be divided into four subsystems, including pollination robotic system, image positioning system, decision control system and flower identification system. In the process of pollination, we first used depth camera to locate the flying robot, and guided the robot to target positions by using automatic control theory. Flowers were then identified by video module on the robot and it would be guided above the flower. After that, the position of the flower would then be determined by calculating the regression equation between the area of the flower and the height of the robot. Finally, the pollination duty could be accomplished by using pollinating device to touch the flower. In the positioning of the flying robot, the RMSE (Root Mean Square Error) values of X, Y and Z-axes were 4.96, 2.97 and 4.29 cm; and the RMSE value of absolute distance was 7.27 cm. The results of positioning indicated that the precision of control could reach an acceptable level. In terms of operation time, it required 24.71 seconds to finish the pollination work from the start of navigation of the flying robot to the contact of the flower. In summary, this study has successfully developed an automatic robotic system for pollination which is able to identify the position of flower and execute the pollination work. In the same time, the required technologies and the architecture of the system are integrated in this study to confirm the possibility of the automation of pollination of flower implemented on flying robots. | en |
dc.description.provenance | Made available in DSpace on 2021-07-11T14:41:40Z (GMT). No. of bitstreams: 1 ntu-105-R03631032-1.pdf: 5276988 bytes, checksum: b3e6ac288c211241de053ef0912102dc (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 誌 謝 i
摘 要 ii Abstract iii 目 錄 v 圖目錄 viii 表目錄 xi 第一章 前言 1 1-1 前言 1 1-2 研究目的 2 第二章 文獻探討 3 2-1 授粉現況 3 2-1-1 授粉概述 3 2-1-2 設施栽培授粉 3 2-1-3 授粉機器 4 2-1-4 作物辨識 6 2-2 四軸飛行器 7 2-2-1 四軸飛行器之概論 7 2-2-2 四軸飛行器之室內定位 9 2-2-3 四軸飛行器之室內應用 13 2-2-4 四軸飛行器應用於花朵授粉 15 第三章 材料與方法 16 3-1 授粉機器人建立 17 3-1-1 微型四軸飛行器 17 3-1-2 通訊協定設置 24 3-1-3 周邊硬體 28 3-2 影像定位系統 30 3-2-1 影像設備 30 3-2-2 飛行器定位 32 3-2-3 影像擷取與分析 34 3-3 決策控制系統 39 3-3-1 系統架構 39 3-3-2 自動控制 40 3-3-3 任務排程 46 3-3-4 授粉流程 48 3-4 花朵辨識系統 50 3-4-1 影像設備 50 3-4-2 花朵定位 52 3-4-3 影像擷取與分析 52 3-5 實驗設計 57 3-5-1 影像定位系統性能測試 57 3-5-2 決策控制系統性能測試 57 3-5-3 花朵辨識系統性能測試 58 3-5-4 授粉流程整合試驗 58 第四章 結果與討論 60 4-1 授粉機器人系統整合 60 4-1-1 系統硬體整合 60 4-1-2 系統軟體整合 63 4-2 影像定位系統性能測試 68 4-2-1影像分析與飛行器定位 68 4-2-2 飛行器距離對影像面積之關係 70 4-3 決策控制系統性能測試 72 4-3-1 飛行器定點穩定性測試 72 4-3-2 飛行器巡航穩定性測試 79 4-4 花朵辨識系統性能測試 81 4-4-1 影像分析與花朵定位 81 4-4-2 高度推算試驗 82 4-5 授粉流程整合試驗 84 第五章 結論與建議 88 5-1 結論 88 5-2 建議事項與未來方向 90 參考文獻 92 附 錄 97 附錄一 飛行器定點穩定性測試之圖表 97 | |
dc.language.iso | zh-TW | |
dc.title | 自動化花朵授粉微型飛行器之研發 | zh_TW |
dc.title | Development of a MAV Flying Robot for Automatic Pollinating | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳剛智,王豐政,顏炳郎,陳加增 | |
dc.subject.keyword | 授粉機器人,四軸飛行器,室內定位,自動控制, | zh_TW |
dc.subject.keyword | Robotic Pollinator,Quadcopter,Indoor Positioning,Automatic Control, | en |
dc.relation.page | 105 | |
dc.identifier.doi | 10.6342/NTU201601371 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2016-08-21 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 生物產業機電工程學研究所 | zh_TW |
顯示於系所單位: | 生物機電工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-R03631032-1.pdf 目前未授權公開取用 | 5.15 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。