請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/77744
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 廖英志(Ying-Chih Liao) | |
dc.contributor.author | Chia-Wei Chang | en |
dc.contributor.author | 張家維 | zh_TW |
dc.date.accessioned | 2021-07-10T22:19:15Z | - |
dc.date.available | 2021-07-10T22:19:15Z | - |
dc.date.copyright | 2017-08-29 | |
dc.date.issued | 2017 | |
dc.date.submitted | 2017-08-04 | |
dc.identifier.citation | 1. Liang, J.; Tong, K.; Pei, Q. A Water‐Based Silver‐Nanowire Screen‐Print Ink for the Fabrication of Stretchable Conductors and Wearable Thin‐Film Transistors. Adv. Mater. 2016,28 (28), 5986-5996.
2. Hu, Q.; Wu, H.; Sun, J.; Yan, D. H.; Gao, Y. L.; Yang, J. L. Large-area perovskite nanowire arrays fabricated by large-scale roll-to-roll micro-gravure printing and doctor blading. Nanoscale 2016,8 (9), 5350-5357. 3. Homenick, C. M.; James, R.; Lopinski, G. P.; Dunford, J.; Sun, J.; Park, H.; Jung, Y.; Cho, G.; Malenfant, P. R. L. Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing. Acs Appl Mater Inter 2016,8 (41), 27900-27910. 4. Jiang, J. K.; Bao, B.; Li, M. Z.; Sun, J. Z.; Zhang, C.; Li, Y.; Li, F. Y.; Yao, X.; Song, Y. L. Fabrication of Transparent Multilayer Circuits by Inkjet Printing. Adv. Mater. 2016,28 (7), 1420-1426. 5. Aleeva, Y.; Pignataro, B. Recent advances in upscalable wet methods and ink formulations for printed electronics. J Mater Chem C 2014,2 (32), 6436-6453. 6. Khan, S.; Lorenzelli, L.; Dahiya, R. S. Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review. IEEE Sens. J. 2015,15 (6), 3164-3185. 7. Singh, M.; Haverinen, H. M.; Dhagat, P.; Jabbour, G. E. Inkjet Printing-Process and Its Applications. Adv. Mater. 2010,22 (6), 673-685. 8. Kamyshny, A.; Magdassi, S. Metallic Nanoinks for Inkjet Printing of Conductive 2D and 3D Structures. Nanomaterials for 2D and 3D Printing 2017. 9. Hoath, S. D. Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets; John Wiley & Sons2016. 10. Derby, B. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annual Review of Materials Research 2010,40, 395-414. 11. Jang, D.; Kim, D.; Moon, J. Influence of Fluid Physical Properties on Ink-Jet Printability. Langmuir 2009,25 (5), 2629-2635. 12. Shen, W. F.; Zhang, X. P.; Huang, Q. J.; Xu, Q. S.; Song, W. J. Preparation of solid silver nanoparticles for inkjet printed flexible electronics with high conductivity. Nanoscale 2014,6 (3), 1622-1628. 13. Chen, S. P.; Kao, Z. K.; Lin, J. L.; Liao, Y. C. Silver Conductive Features on Flexible Substrates from a Thermally Accelerated Chain Reaction at Low Sintering Temperatures. Acs Appl Mater Inter 2012,4 (12), 7063-7067. 14. Rajan, K.; Roppolo, I.; Chiappone, A.; Bocchini, S.; Perrone, D.; Chiolerio, A. Silver nanoparticle ink technology: state of the art. Nanotechnology, science and applications 2016,9, 1. 15. Gu, Y.; Wu, A. D.; Federici, J. F.; Zhang, X. D. Inkjet printable constantan ink for the fabrication of flexible and conductive film. Chem. Eng. J. 2017,313, 27-36. 16. Kwon, Y. T.; Lee, Y. I.; Kim, S.; Lee, K. J.; Choa, Y. H. Full densification of inkjet-printed copper conductive tracks on a flexible substrate utilizing a hydrogen plasma sintering. Appl. Surf. Sci. 2017,396, 1239-1244. 17. Lee, D. J.; Park, S. H.; Jang, S.; Kim, H. S.; Oh, J. H.; Song, Y. W. Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate. J Micromech Microeng 2011,21 (12). 18. Kang, J. S.; Ryu, J.; Kim, H. S.; Hahn, H. T. Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light. J. Electron. Mater. 2011,40 (11), 2268-2277. 19. Yang, Y.-J.; Kelkar, A. V.; Corti, D. S.; Franses, E. I. Effect of interparticle interactions on agglomeration and sedimentation rates of colloidal silica microspheres. Langmuir 2016,32 (20), 5111-5123. 20. Hiemenz, P. C. Principles of colloid and surface chemistry; M. Dekker New York1986; Vol. 188. 21. Mason, M.; Weaver, W. The settling of small particles in a fluid. Phys. Rev. 1924,23 (3), 412-426. 22. Yang, Y. J.; Kelkar, A. V.; Zhu, X. L.; Bai, G. R.; Ng, H. T.; Corti, D. S.; Franses, E. I. Effect of sodium dodecylsulfate monomers and micelles on the stability of aqueous dispersions of titanium dioxide pigment nanoparticles against agglomeration and sedimentation. J. Colloid Interface Sci. 2015,450, 434-445. 23. Israelachvili, J. N. Intermolecular and surface forces; Academic press2015. 24. Verwey, E. J. W.; Overbeek, J. T. G.; Overbeek, J. T. G. Theory of the stability of lyophobic colloids; Courier Corporation1999. 25. Boisvert, J.-P.; Persello, J.; Castaing, J.-C.; Cabane, B. Dispersion of alumina-coated TiO 2 particles by adsorption of sodium polyacrylate. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2001,178 (1), 187-198. 26. Jeong, S.; Song, H. C.; Lee, W. W.; Choi, Y.; Ryu, B.-H. Preparation of aqueous Ag Ink with long-term dispersion stability and its inkjet printing for fabricating conductive tracks on a polyimide film. J. Appl. Phys. 2010,108 (10), 102805. 27. SenGupta, A. K.; Papadopoulos, K. D. Stability of concentrated colloids: the controlling parameters. J. Colloid Interface Sci. 1998,203 (2), 345-353. 28. Lerche, D.; Sobisch, T. Direct and Accelerated Characterization of Formulation Stability. J. Dispersion Sci. Technol. 2011,32 (12), 1799-1811. 29. Mengual, O.; Meunier, G.; Cayre, I.; Puech, K.; Snabre, P. TURBISCAN MA 2000: multiple light scattering measurement for concentrated emulsion and suspension instability analysis. Talanta 1999,50 (2), 445-456. 30. Lerche, D. Dispersion stability and particle characterization by sedimentation kinetics in a centrifugal field. J. Dispersion Sci. Technol. 2002,23 (5), 699-709. 31. Lamas, B.; Abreu, B.; Fonseca, A.; Martins, N.; Oliveira, M. Assessing colloidal stability of long term MWCNT based nanofluids. J. Colloid Interface Sci. 2012,381 (1), 17-23. 32. Detloff, T.; Sobisch, T.; Lerche, D. Particle size distribution by space or time dependent extinction profiles obtained by analytical centrifugation (concentrated systems). Powder Technol. 2007,174 (1), 50-55. 33. He, P.; Mejia, A. F.; Cheng, Z. D.; Sun, D. Z.; Sue, H. J.; Dinair, D. S.; Marquez, M. Hindrance function for sedimentation and creaming of colloidal disks. Phys Rev E 2010,81 (2). 34. Tadros, T. F. Emulsion formation and stability; John Wiley & Sons2013. 35. Chen, H. B.; Khemtong, C.; Yang, X. L.; Chang, X. L.; Gao, J. M. Nanonization strategies for poorly water-soluble drugs. Drug Discovery Today 2011,16 (7-8), 354-360. 36. Salvia-Trujillo, L.; Soliva-Fortuny, R.; Rojas-Grau, M. A.; McClements, D. J.; Martin-Belloso, O. Edible Nanoemulsions as Carriers of Active Ingredients: A Review. Annu Rev Food Sci T 2017,8, 439-466. 37. Anton, N.; Benoit, J. P.; Saulnier, P. Design and production of nanoparticles formulated from nano-emulsion templates - A review. J. Controlled Release 2008,128 (3), 185-199. 38. Hotze, E. M.; Phenrat, T.; Lowry, G. V. Nanoparticle aggregation: challenges to understanding transport and reactivity in the environment. Journal of environmental quality 2010,39 (6), 1909-1924. 39. Israelachvili, J.-N. In The calculation of van der Waals dispersion forces between macroscopic bodies, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 1972; The Royal Society, pp 39-55. 40. Visser, J. On Hamaker constants: A comparison between Hamaker constants and Lifshitz-van der Waals constants. Adv. Colloid Interface Sci. 1972,3 (4), 331-363. 41. Tadros, T.; Izquierdo, P.; Esquena, J.; Solans, C. Formation and stability of nano-emulsions. Adv. Colloid Interface Sci. 2004,108, 303-318. 42. Solans, C.; Izquierdo, P.; Nolla, J.; Azemar, N.; Garcia-Celma, M. Nano-emulsions. Current opinion in colloid & interface science 2005,10 (3), 102-110. 43. Delmas, T.; Piraux, H.; Couffin, A. C.; Texier, I.; Vinet, F.; Poulin, P.; Cates, M. E.; Bibette, J. How To Prepare and Stabilize Very Small Nanoemulsions. Langmuir 2011,27 (5), 1683-1692. 44. Mahdi Jafari, S.; He, Y.; Bhandari, B. Nano-emulsion production by sonication and microfluidization—a comparison. International Journal of Food Properties 2006,9 (3), 475-485. 45. Qian, C.; McClements, D. J. Formation of nanoemulsions stabilized by model food-grade emulsifiers using high-pressure homogenization: Factors affecting particle size. Food Hydrocolloid 2011,25 (5), 1000-1008. 46. Carpenter, J.; Saharan, V. K. Ultrasonic assisted formation and stability of mustard oil in water nanoemulsion: Effect of process parameters and their optimization. Ultrason. Sonochem. 2017,35, 422-430. 47. Kentish, S.; Wooster, T. J.; Ashokkumar, A.; Balachandran, S.; Mawson, R.; Simons, L. The use of ultrasonics for nanoemulsion preparation. Innov Food Sci Emerg 2008,9 (2), 170-175. 48. Evans, D. F.; Wennerström, H. The Colloidal Domain: Where Physics, Chemistry, Biology, and Technology Meet 1999; Vol. 2. p 193-197. 49. Solans, C.; Solé, I. Nano-emulsions: formation by low-energy methods. Current Opinion in Colloid & Interface Science 2012,17 (5), 246-254. 50. Komaiko, J. S.; McClements, D. J. Formation of Food‐Grade Nanoemulsions Using Low‐Energy Preparation Methods: A Review of Available Methods. Comprehensive Reviews in Food Science and Food Safety 2016,15 (2), 331-352. 51. Shinoda, K.; Saito, H. The stability of O/W type emulsions as functions of temperature and the HLB of emulsifiers: the emulsification by PIT-method. J. Colloid Interface Sci. 1969,30 (2), 258-263. 52. Morales, D.; Solans, C.; Gutierrez, J. M.; Garcia-Celma, M. J.; Olsson, U. Oil/water droplet formation by temperature change in the water/C16E6/mineral oil system. Langmuir 2006,22 (7), 3014-3020. 53. Roger, K.; Cabane, B.; Olsson, U. Formation of 10− 100 nm size-controlled emulsions through a sub-PIT cycle. Langmuir 2009,26 (6), 3860-3867. 54. Roger, K.; Cabane, B.; Olsson, U. Emulsification through surfactant hydration: the PIC process revisited. Langmuir 2010,27 (2), 604-611. 55. Li, C.; Mei, Z.; Liu, Q.; Wang, J.; Xu, J.; Sun, D. Formation and properties of paraffin wax submicron emulsions prepared by the emulsion inversion point method. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2010,356 (1), 71-77. 56. Fernandez, P.; André, V.; Rieger, J.; Kühnle, A. Nano-emulsion formation by emulsion phase inversion. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2004,251 (1), 53-58. 57. Gupta, A.; Eral, H. B.; Hatton, T. A.; Doyle, P. S. Nanoemulsions: formation, properties and applications. Soft Matter 2016,12 (11), 2826-2841. 58. Yang, Y.; Marshall-Breton, C.; Leser, M. E.; Sher, A. A.; McClements, D. J. Fabrication of ultrafine edible emulsions: Comparison of high-energy and low-energy homogenization methods. Food Hydrocolloid 2012,29 (2), 398-406. 59. Wooster, T. J.; Golding, M.; Sanguansri, P. Impact of oil type on nanoemulsion formation and Ostwald ripening stability. Langmuir 2008,24 (22), 12758-12765. 60. Lacava, J.; Born, P.; Kraus, T. Nanoparticle clusters with Lennard-Jones geometries. Nano Lett. 2012,12 (6), 3279-3282. 61. Bansode, S.; Banarjee, S.; Gaikwad, D.; Jadhav, S.; Thorat, R. Microencapsulation: a review. International Journal of Pharmaceutical Sciences Review and Research 2010,1 (2), 38-43. 62. Singh, M.; Hemant, K.; Ram, M.; Shivakumar, H. Microencapsulation: A promising technique for controlled drug delivery. Research in pharmaceutical sciences 2010,5 (2), 65. 63. Watts, P.; Davies, M.; Melia, C. Microencapsulation using emulsification/solvent evaporation: an overview of techniques and applications. Critical reviews in therapeutic drug carrier systems 1989,7 (3), 235-259. 64. Fan, Y.; Guo, R.; Shi, X.; Allen, S.; Cao, Z.; Baker, J. R.; Wang, S. H. Modified Nanoemulsions with Iron Oxide for Magnetic Resonance Imaging. Nanomaterials 2016,6 (12), 223. 65. Ahn, B. Y.; Duoss, E. B.; Motala, M. J.; Guo, X. Y.; Park, S. I.; Xiong, Y. J.; Yoon, J.; Nuzzo, R. G.; Rogers, J. A.; Lewis, J. A. Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes. Science 2009,323 (5921), 1590-1593. 66. Porras, M.; Solans, C.; Gonzalez, C.; Martinez, A.; Guinart, A.; Gutierrez, J. M. Studies of formation of W/O nano-emulsions. Colloid Surface A 2004,249 (1-3), 115-118. 67. Zhang, R.; Wang, Y.; Tan, L.; Zhang, H.; Yang, M. Analysis of polysorbate 80 and its related compounds by RP-HPLC with ELSD and MS detection. J. Chromatogr. Sci. 2012,50 (7), 598-607. 68. Liu, W. R.; Sun, D. J.; Li, C. F.; Liu, Q.; Xu, H. Formation and stability of paraffin oil-in-water nano-emulsions prepared by the emulsion inversion point method. J. Colloid Interface Sci. 2006,303 (2), 557-563. 69. Nazarzadeh, E.; Anthonypillai, T.; Sajjadi, S. On the growth mechanisms of nanoemulsions. J. Colloid Interface Sci. 2013,397, 154-162. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/77744 | - |
dc.description.abstract | 印刷電子是近年來快速發展的明星產業。噴墨印刷技術是其中相當被看好的ㄧ項製程,因其具有良好的解析度,適合印製精細的導電圖樣。奈米銀粒子墨水是目前被廣泛使用的導電噴墨墨水,然而其在長期存放下會產生團聚與沉降的現象,導致印刷時圖樣出現缺陷,甚至造成噴頭堵塞。銀粒子墨水穩定性不佳的原因在於粒子間強烈的凡德瓦吸引力。為了改善這個問題,本研究發展了ㄧ個新穎方法來增進墨水的穩定性。利用乳化的方式將銀粒子裝入液滴中,使銀粒子周圍產生ㄧ層保護液層以減少銀粒子之間的吸引力。本研究中以油包水之奈米乳液作為水性銀粒子之載體。為了使所有銀粒子能完全被液滴包覆,檢視了不同乳化劑濃度的影響。我們發現只有在液滴與銀粒子粒徑分布相差夠大時,所有銀粒子才能完全被包入液滴中。冷凍電鏡的觀察也證實了銀粒子被包裹在奈米乳液的液滴裡。含銀粒子乳液的沉降速度低於銀粒子懸浮原液且其沉降特性符合理論預期,顯示在適當的液滴大小下,含銀粒子液滴密度下降的幅度能彌補粒徑增大的影響,使銀粒子乳液墨水具有與原墨水相近之懸浮性。在一個月的儲存測試下,銀粒子懸浮原液在存放兩個禮拜後出現變質情況而乳液墨水仍保持良好之均勻狀態,顯示降低銀粒子間的凡德瓦力有效地增進了墨水之穩定性。最後,含銀粒子乳液經可噴印性分析後證實為可噴印之穩定墨水,其Z值為11.2,介於4-14的可噴印範圍內。在適當噴墨參數的調控下,能形成穩定而單獨的墨滴,可於紙上噴印出線寬約170 μm,電阻率4.92 μΩ-cm的長直銀粒子導線,顯示其在導電噴墨墨水上的應用潛力。 | zh_TW |
dc.description.abstract | Silver nanoparticle (AgNP) inks are currently the most commonly used conductive ink for printed conductive tracks. However, the ink stability against aggregation and sedimentation is poor and results in short shelf life, severe nozzle clogging, and bad printing qualities. Herein, a new method is developed to improve the stability of AgNP inks. In this work, a water-in-oil type emulsion is used as a carrier for water-based silver nanoparticles. Different water/surfactant ratio are examined for the complete AgNP uptake in water nano droplets. The morphology of AgNP after emulsification is carefully examined with electro-microscopy to elucidate the particle engulfment in water. The encapsulated AgNP show a much lower sedimentation rate due to the greatly reduced overall density of encapsulated AgNPs/water droplets. Moreover, the water/oil interfaces around AgNPs prevent aggregations, and thus leads to better long-term ink stability. The physical properties of AgNP emulsion meet the requirement of the printer and stable inkjet droplet can be produced. Conductive tracks with electrical resistance 4.92 μΩ-cm and line width 170 μm can be printedon photo papers, which demonstrates the potential of the emulsion for inkjet printing application. | en |
dc.description.provenance | Made available in DSpace on 2021-07-10T22:19:15Z (GMT). No. of bitstreams: 1 ntu-106-R04524059-1.pdf: 2634208 bytes, checksum: 6b11073d62821cd59f964bdb28702b47 (MD5) Previous issue date: 2017 | en |
dc.description.tableofcontents | 口試委員審定書 i
誌謝 ii 中文摘要 iii ABSTRACT iv 目錄 v 圖目錄 viii 表目錄 xi 第一章 緒論 1 1.1 前言 1 1.2 研究目的 2 1.3 論文架構 2 第二章 理論基礎與文獻回顧 3 2.1 噴墨印刷技術 3 2.1.1 噴墨印表機原理 4 2.1.2 墨水性質與可噴印性 5 2.2 金屬導電噴墨墨墨水 8 2.2.1 奈米銀粒子導電噴墨墨水 9 2.2.2 金屬粒子型導電墨水之不穩定性 10 2.2.3 墨水穩定性測量方法 14 2.3 乳液 19 2.3.1 前言 19 2.3.2 理論分析 19 2.3.3 奈米乳液 23 2.3.4 含粒子乳液 26 第三章 實驗方法與藥品 27 3.1 實驗藥品 27 3.2 實驗設備 28 3.3 實驗方法 29 3.3.1 製備奈米銀粒子懸浮液 29 3.3.2 製作奈米乳液 30 3.3.3 銀粒子親和性測試 32 3.3.4 製作含銀粒子奈米乳液 32 3.3.5 銀粒子乳液沉降特性分析 33 3.3.6 銀粒子乳液粒徑隨時間之變化 35 3.3.7 銀粒子乳液物理特性測量 36 3.3.8 噴印導電圖樣 36 第四章 含銀粒子乳液之噴墨導電墨水 40 4.1 奈米銀粒子懸浮液 40 4.2 製備奈米乳液 41 4.2.1 控制奈米乳液液滴大小 44 4.3 製備銀粒子奈米乳液 45 4.3.1 銀粒子之親和性 45 4.3.2 含銀粒子奈米乳液 47 4.4 沉降穩定性分析 52 4.5 長期穩定性分析 55 4.6 抵抗聚集穩定性分析 57 4.7 噴印導電圖樣 59 第五章 結論 64 第六章 未來展望 66 參考資料 67 | |
dc.language.iso | zh-TW | |
dc.title | 製備含金屬奈米粒子之穩定乳液導電墨水 | zh_TW |
dc.title | Encapsulated Metallic Nanoparticles in Water/Oil Emulsion for Stable Conductive Inks | en |
dc.type | Thesis | |
dc.date.schoolyear | 105-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 陳立仁(Li-Jen Chen),邱文英(Wen-Yen Chiu),蘇培珍(Pei-Chen Su) | |
dc.subject.keyword | 噴墨印刷,導電墨水,奈米銀粒子,奈米乳液,長期穩定性, | zh_TW |
dc.subject.keyword | Inkjet printing,Conductive ink,Silver nanoparticles,Nanoemulsion,Long-term stability, | en |
dc.relation.page | 71 | |
dc.identifier.doi | 10.6342/NTU201702526 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2017-08-04 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-R04524059-1.pdf 目前未授權公開取用 | 2.57 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。