請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/77524
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林招松(Chao-Sung Lin) | |
dc.contributor.author | Siao-Ying Chen | en |
dc.contributor.author | 陳筱螢 | zh_TW |
dc.date.accessioned | 2021-07-10T22:06:55Z | - |
dc.date.available | 2021-07-10T22:06:55Z | - |
dc.date.copyright | 2018-08-19 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-08-14 | |
dc.identifier.citation | [1]. Youssef, K. M., et al. (2015). 'A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures.' Materials Research Letters 3(2): 95-99
[2]. Kaufman, J. G., et al. (2004). Aluminum Alloy Castings: Properties, Processes, and Applications, ASM International [3]. 軽金属溶接協会,(2010). 軽金属溶接誌 Vol. 48, No. 7 [4]. Revie, R. W. (2011). Uhlig's Corrosion Handbook, Wiley. [5]. Pourbaix, M. and Franklin, J. (1966). Atlas of Electrochemical Equilibria in Aqueous Solution, Elsevier Science & Technology. [6]. Davis, J. R. (1999). Corrosion of Aluminum and Aluminum Alloys, A S M International [7]. Zeng, F.-l., et al. (2011). 'Corrosion mechanism associated with Mg2Si and Si particles in Al–Mg–Si alloys.' Transactions of Nonferrous Metals Society of China 21(12): 2559-2567 [8]. Mitra, R. (2017). Intermetallic Matrix Composites: Properties and Applications, Elsevier Science [9]. Boag, A.G. (2008), Ph.D. Thesis. “The Relationship between microstructure and stable pitting initiation in aerospace aluminium alloy 2024-T3”, RMIT University [10]. Totten, G. E. and MacKenzie, D. S. (2003). Handbook of Aluminum: Volume 2: Alloy Production and Materials Manufacturing, CRC Press [11]. Robinson, M. J. (1982). 'Mathematical modelling of exfoliation corrosion in high strength aluminium alloys.' Corrosion Science 22(8): 775-790 [12]. Ghali, E. and Revie, R. W. (2010). Corrosion Resistance of Aluminum and Magnesium Alloys: Understanding, Performance, and Testing, Wiley [13]. Henthorn (1981). Localized Corrosion-Cause of Metal Failure, American Society for Testing & Materials [14]. McCafferty, E. (2010). Introduction to Corrosion Science, Springer New York [15]. Curioni, M. and Scenini, F. (2015). 'The Mechanism of Hydrogen Evolution During Anodic Polarization of Aluminium.' Electrochimica Acta 180: 712-721 [16]. Prasad, N. E. and Wanhill, R. J. H. (2016). Aerospace Materials and Material Technologies: Volume 1: Aerospace Materials, Springer Singapore [17]. Curle, U. A. (2015), Ph.D. Thesis. “Properties of R-HPDC Al-Zn-Mg-Cu aluminium alloys', University of Witwatersrand, Johannesburg [18]. Raja, V. S. and Shoji, T. (2011). Stress Corrosion Cracking: Theory and Practice, Elsevier Science. [19]. Sankaran, K. K. and Mishra, R. S. (2017). Metallurgy and Design of Alloys with Hierarchical Microstructures, Elsevier Science. [20]. Davis, J. R. (2001). Alloying: Understanding the Basics, A S M International. [21]. Mukhopadhyay, P. (2012). 'Alloy Designation, Processing, and Use of AA6XXX Series Aluminium Alloys.' ISRN Metallurgy 2012: 15 [22]. Totten, G. E. and MacKenzie, D. S. (2003). Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes, CRC Press [23]. Ferry, M. (2006). Direct Strip Casting of Metals and Alloys, Elsevier Science [24]. Mondolfo, L. F. (2013). Aluminum Alloys: Structure and Properties, Elsevier Science [25]. Grote, K. H. and Antonsson, E. K. (2009). Springer Handbook of Mechanical Engineering, Springer. [26]. Bäckerud, L., et al. (1986). Solidification Characteristics of Aluminum Alloys: Wrought alloys, Skanaluminium. [27]. Samaras, S. N. and Haidemenopoulos, G. N. (2007). 'Modelling of microsegregation and homogenization of 6061 extrudable Al-alloy.' Journal of Materials Processing Technology 194(1): 63-73 [28]. Schloth, P. (2015), Ph.D. Thesis. “Precipitation in the high strength AA7449 aluminium alloyimplications on internal stresses on different length scales,” EPFL [29]. Cayron, C. and Buffat, P. A. (2000). 'Transmission electron microscopy study of the β′ phase (Al–Mg–Si alloys) and QC phase (Al–Cu–Mg–Si alloys): ordering mechanism and crystallographic structure.' Acta Materialia 48(10): 2639-2653. [30]. Chakrabarti, D. J. and Laughlin, D. E. (2004). 'Phase relations and precipitation in Al–Mg–Si alloys with Cu additions.' Progress in Materials Science 49(3): 389-410. [31]. Ryum, N. (1975). 'PRECIPITATION KINETICS IN AN Al-Zn-Mg-ALLOY.' Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques 66(6): 338-343. [32]. Mathaudhu, S., et al. (2016). Essential Readings in Magnesium Technology, Springer International Publishing. [33]. Effenberg, G. and Ilyenko, S. (2005). Al-Mg-Zn (Aluminium - Magnesium - Zinc). Light Metal Systems. Part 3: Selected Systems from Al-Fe-V to Al-Ni-Zr, Springer Berlin Heidelberg: 1-19. [34]. Pagliarello, A. G. (2012), MSc Thesis. 'Effects of Modified Solution Heat Treatment on the Mechanical Properties and Stress Corrosion Cracking Susceptibility of Aluminum Alloy 7075,' Carleton University [35]. Liu, S., et al. (2010). 'Investigation of quench sensitivity of high strength Al–Zn–Mg–Cu alloys by time–temperature-properties diagrams.' Materials & Design 31(6): 3116-3120. [36]. Huang, T.-S. and Frankel, G. S. (2006). 'Influence of grain structure on anisotropic localised corrosion kinetics of AA7xxx-T6 alloys.' Corrosion Engineering, Science and Technology 41(3): 192-199 [37]. Maitra, S. and English, G. C. (1981). 'Mechanism of localized corrosion of 7075 alloy plate.' Metallurgical Transactions A 12(3): 535-541. [38]. Ramgopal, T., et al. (2002). 'Role of Grain-Boundary Precipitates and Solute-Depleted Zone on the Intergranular Corrosion of Aluminum Alloy 7150.' CORROSION 58(8): 687-697 [39]. Rajan, K., et al. (1982). 'Microstructural study of a high-strength stress-corrosion resistant 7075 aluminium alloy.' Journal of Materials Science 17(10): 2817-2824. [40]. Cina, B.M. (1974). US Patent No. 3856584 [41]. Ayer, R., et al. (1985). 'Microanalytical study of the heterogeneous phases in commercial Al-Zn-Mg-Cu alloys.' Metallurgical Transactions A 16(11): 1925-1936 [42]. Harlow, D. G., et al. (2006). 'Statistical analysis of constituent particles in 7075-T6 aluminum alloy.' Metallurgical and Materials Transactions A 37(11): 3367-3373. [43]. Gao, M., et al. (1998). 'An analytical electron microscopy study of constituent particles in commercial 7075-T6 and 2024-T3 alloys.' Metallurgical and Materials Transactions A 29(4): 1145-1151 [44]. Singh, S. S., et al. (2014). '3D microstructural characterization and mechanical properties of constituent particles in Al 7075 alloys using X-ray synchrotron tomography and nanoindentation.' Journal of Alloys and Compounds 602: 163-174 [45]. Birbilis, N. and Buchheit, R. G. (2005). 'Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys: An Experimental Survey and Discussion.' Journal of The Electrochemical Society 152(4): B140-B151 [46]. Birbilis, N. and Buchheit, R. G. (2008). 'Investigation and Discussion of Characteristics for Intermetallic Phases Common to Aluminum Alloys as a Function of Solution pH.' Journal of The Electrochemical Society 155(3): C117-C126 [47]. Cavanaugh, M. K., et al. (2014). 'Electrochemical Characterization of Intermetallic Phases Common to Aluminum Alloys as a Function of Solution Temperature.' Journal of The Electrochemical Society 161(12): C535-C543 [48]. Büchler, M., et al. (2000). 'Investigation of the initiation of localized corrosion on aluminum alloys by using fluorescence microscopy.' Corrosion Science 42(9): 1661-1668 [49]. Ilevbare, G. O., et al. (2004). 'In Situ Confocal Laser Scanning Microscopy of AA 2024-T3 Corrosion Metrology: I. Localized Corrosion of Particles.' Journal of The Electrochemical Society 151(8): B453-B464 [50]. Andreatta, F., et al. (2003). 'Effect of solution heat treatment on galvanic coupling between intermetallics and matrix in AA7075-T6.' Corrosion Science 45(8): 1733-1746. [51]. Andreatta, F., et al. (2003). 'Electrochemical characterisation of aluminium AA7075-T6 and solution heat treated AA7075 using a micro-capillary cell.' Electrochimica Acta 48(20): 3239-3247 [52]. Tracton, A. A. (2006). Coatings Technology: Fundamentals, Testing, and Processing Techniques, CRC Press [53]. Freitag, W. and Stoye, D. (2008). Paints, Coatings and Solvents, Wiley [54]. Fabian, R. (1993). Vacuum Technology: Practical Heat Treating and Brazing, ASM International [55]. Wernick, S., et al. (1987). The Surface Treatment and Finishing of Aluminum and Its Alloys, Finishing Publications Limited. [56]. Engineers, N. B. C. (2003). Electroplating, Anodizing & Metal Treatment Hand Book, NIIR Project Consultancy Services [57]. Chidambaram, D., et al. (2006). 'The role of hexafluorozirconate in the formation of chromate conversion coatings on aluminum alloys.' Electrochimica Acta 51(14): 2862-2871 [58]. Campestrini, P., et al. (2004). 'Chromate Conversion Coating on Aluminum Alloys: I. Formation Mechanism.' Journal of The Electrochemical Society 151(2): B59-B70 [59]. Goeminne, G. (1999), Ph.D. Thesis. 'Study of the Mechanism of Chemical Conversion of Aluminum.' Vrije Universiteit Brussel [60]. Osborne, J. H. (2001). 'Observations on chromate conversion coatings from a sol–gel perspective.' Progress in Organic Coatings 41(4): 280-286 [61]. Matzdorf, C. A., et al. (2002). US Patent No. 6375726 [62]. Matzdorf, C. A., et al. (2003). US Patent No. 6511532 [63]. Matzdorf, C. A., et al. (2003). US Patent No. 6521029 [64]. Matzdorf, C. A., et al. (2003). US Patent No. 6527841 [65]. Matzdorf, C. A., et al. (2003). US Patent No. 6663700 [66]. Matzdorf, C. A., et al. (2003). US Patent No. 6669764 [67]. Suib, S. L., et al. (2009). 'Determination of hexavalent chromium in NAVAIR trivalent chromium process (TCP) coatings and process solutions.' Metal Finishing 107(2): 28-34 [68]. Munson, C. A., et al. (2018). 'Cross comparison of TCP conversion coating performance on aluminum alloys during neutral salt-spray and thin-layer mist accelerated degradation testing.' Electrochimica Acta 282: 171-184 [69]. Li, L., et al. (2011). 'The Formation, Structure, Electrochemical Properties and Stability of Trivalent Chrome Process (TCP) Coatings on AA2024.' Journal of The Electrochemical Society 158(9): C274-C283 [70]. Qi, J. T., et al. (2015). 'Trivalent chromium conversion coating formation on aluminium.' Surface and Coatings Technology 280: 317-329 [71]. Qi, J., et al. (2016). 'Formation of a Trivalent Chromium Conversion Coating on AA2024-T351 Alloy.' Journal of The Electrochemical Society 163(2): C25-C35. [72]. Qi, J., et al. (2016). 'Influence of pre- and post-treatments on formation of a trivalent chromium conversion coating on AA2024 alloy.' Thin Solid Films 616: 270-278 [73]. Li, L. and Swain, G. M. (2013). 'Formation and Structure of Trivalent Chromium Process Coatings on Aluminum Alloys 6061 and 7075.' CORROSION 69(12): 1205-1216 [74]. Dong, X., et al. (2010). 'Structure and Composition of Trivalent Chromium Process (TCP) Films on Al Alloy.' Langmuir 26(13): 10833-10841 [75]. Li, L., et al. (2013). 'In situ pH measurement during the formation of conversion coatings on an aluminum alloy (AA2024).' Analyst 138(15): 4398-4402 [76]. Munson, C. A. and Swain, G. M. (2017). 'Structure and chemical composition of different variants of a commercial trivalent chromium process (TCP) coating on aluminum alloy 7075-T6.' Surface and Coatings Technology 315: 150-162 [77]. Qi, J., et al. (2017). 'An Optimized Trivalent Chromium Conversion Coating Process for AA2024-T351 Alloy.' Journal of The Electrochemical Society 164(7): C390-C395 [78]. Li, L., et al. (2013). 'Electrochemical Characterization of Trivalent Chromium Process (TCP) Coatings on Aluminum Alloys 6061 and 7075.' Journal of The Electrochemical Society 160(8): C396-C401 [79]. Munson, C. A., et al. (2018). 'Electrochemical Characterization of Different Variants of a Commercial Trivalent Chromium Process (TCP) Coating on Aluminum Alloy 7075-T6.' CORROSION 74(1): 50-65 [80]. Li, L. and Swain, G. M. (2013). 'Effects of Aging Temperature and Time on the Corrosion Protection Provided by Trivalent Chromium Process Coatings on AA2024-T3.' ACS Applied Materials & Interfaces 5(16): 7923-7930. [81]. Qi, J., et al. (2016). 'Influence of Water Immersion Post-Treatment Parameters on Trivalent Chromium Conversion Coatings Formed on AA2024-T351 Alloy.' Journal of The Electrochemical Society 163(5): C131-C138 [82]. Guo, Y. and Frankel, G. S. (2012). 'Active Corrosion Inhibition of AA2024-T3 by Trivalent Chrome Process Treatment.' CORROSION 68(4): 045002-045001-045002-045010. [83]. Qi, J., et al. (2017). 'Chromate Formed in a Trivalent Chromium Conversion Coating on Aluminum.' Journal of The Electrochemical Society 164(7): C442-C449 [84]. Li, L., et al. (2012). 'Transient Formation of Chromate in Trivalent Chromium Process (TCP) Coatings on AA2024 as Probed by Raman Spectroscopy.' Journal of The Electrochemical Society 159(8): C326-C333 [85]. Siegel, J. A. and Saukko, P. J. (2012). Encyclopedia of Forensic Sciences, Elsevier Science [86]. Standard, A. S. T.M. B117 – 16, Standard Practice for Operating Salt Spray (Fog) Apparatus, ASTM Inernational, West Conshohocken (2016) [87]. Liu, Y., et al. (2016). 'Combined Corrosion and Wear of Aluminium Alloy 7075-T6.' Journal of Bio- and Tribo-Corrosion 2(2): 9 [88]. Saif, M. T. A., et al. (2002). 'Effect of native Al2O3 on the elastic response of nanoscale Al films.' Acta Materialia 50(11): 2779-2786 [89]. Li, S.-H., et al. (2017). 'Small-volume aluminum alloys with native oxide shell deliver unprecedented strength and toughness.' Acta Materialia 126: 202-209 [90]. Evertsson, J., et al. (2015). 'The thickness of native oxides on aluminum alloys and single crystals.' Applied Surface Science 349: 826-832 [91]. Joshi, S., et al. (2011). 'Effect of alkaline cleaning and activation on aluminum alloy 7075-T6.' Applied Surface Science 257(6): 1859-1863 [92]. Trasatti, S. (1972). 'Work function, electronegativity, and electrochemical behaviour of metals: III. Electrolytic hydrogen evolution in acid solutions.' Journal of Electroanalytical Chemistry and Interfacial Electrochemistry 39(1): 163-184 [93]. Pletcher, D. (2013). Industrial Electrochemistry, Springer Netherlands | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/77524 | - |
dc.description.abstract | 鋁合金7075-T6為析出強化型合金,因其具有良好的強度-重量比,廣泛運用在航太載具上。在加工過程中,7075-T6會產生三種異質相:晶出物、分散相和析出強化相,異質相與基材會有迦凡尼腐蝕使其抗蝕力降低。所以,為確保元件壽命,會對7075-T6鋁合金進行防蝕處理,例如六價鉻化成處理。三價鉻是一種取代有環保疑慮六價鉻的製程之一,商用三價鉻藥水以三價鉻、鋯鹽為主要成份,再添加了增厚劑、界面活性劑、穩定劑等物質,使化成液與化成皮膜有較好的性質。
本論文探討7075-T6中的鎂矽及鋁鐵銅晶出相,於酸鹼洗後之組成和樣貌變化與在三價鉻化成中的表現;以及比較只含主劑成分之三價鉻、鋯鹽藥水(後以CZ代稱)與商用藥水(SurTec 650)之化成皮膜差異。實驗發現經氫氧化鈉鹼洗與硝酸酸洗後,鎂矽相發生去合金化,鎂會選擇性溶出,使其成為富矽相。鋁鐵銅晶出相周圍有腐蝕壕溝之形貌,其也會遭受去合金化,鋁與鐵會優先溶出,表面形成海綿狀結構。酸洗過後試片表面孔洞之樣貌,應為晶出相溶解或脫落所造成。 CZ之化成膜在真空環境下有剝落現象,而隨7075-T6鋁合金基材粗糙度增加,剝落現象漸為減緩。若比較未脫落之區域,其與SurTec化成膜有相似之形貌。仍可觀察到富矽相,EDS線性掃描顯示其鉻與鋯訊號與基材相近。化成後之表面無法直接觀測到鋁鐵銅晶出相,然而有眾多凸起樣貌之膜厚區,其比基材有較多鉻、鋯及鐵訊號,推測下方為鋁鐵銅晶出相。相較於前處理與研磨拋光試片,SurTec與CZ試片有較小陰陽極極化電流密度。陽極極化皆有鈍化區產生,然而CZ拋光試片之陰極極化行為可分為兩類,CZ-1和CZ-2。CZ-2與SurTec曲線表現相似,皆有出色陰極抑制效果;CZ-1有較高的陰極電流密度與較負塔弗斜率,顯示抗蝕性不如SurTec和CZ-2曲線。有關陽極極化行為,SurTec試片有較高的崩潰電位,在相同絕對電位下也有較佳的陰極抑制效果。鹽霧測試結果顯示,相同的化成液下,基材粗糙度較高之化成試片有較少的蝕孔;相同基材粗糙度時,CZ試片擁有較少之蝕孔。此結果與極化曲線之結果矛盾,仍待進一步探討。 | zh_TW |
dc.description.abstract | Aluminum alloy 7075-T6 is a precipitation-strengthening alloy. In light of its high strength-to-weight ratio, 7075-T6 alloy has been widely used in the aircraft industry. Three heterogeneous phases are commonly found in commercial 7075-T6 alloys, including constituent particle, dispersoid, and precipitation-strengthening phase. The galvanic effect between the matrix and heterogeneous phases markedly reduces its corrosion resistance. Conversion coating treatment is thus indispensable for aluminum alloys, such as the hexavalent chromium treatment. Trivalent chromium is one of alternatives to hexavalent chromium, which is known as a carcinogen substance. Commercial trivalent chromium solutions are generally composed of Cr(III) and zirconate with the addition of thickener, surfactant, stabilizer to improve the solution stability and the corrosion resistance of the resulting conversion coating.
The study focuses on the compositions and morphology change of Mg-Si and Al-Fe-Cu constituent particles after alkaline and pickling pretreatments, as well as on the conversion coating formation behaviors on constituent particles in a trivalent chromium conversion solution. The difference between commercial solution (SurTec 650) and the solution solely composed of Cr(III) and zirconate (denoted as CZ herein) was also studied. After sodium hydroxide cleaning and nitric acid pickling, the Mg-Si particles underwent a dealloying process. Magnesium was selectively dissolved in the pretreantment solution, resulting in Si-rich particles. Moreover, typical trencheing was observed around the Al-Fe-Cu particles. The Al-Fe-Cu particle also suffered dealloying, by which aluminum and iron dissolved, resulting in a sponge structure on the surface of the particle. The pitting morphology on the alloy surface after pickling pretreatment was caused by the dissolution or shedding of the particles. The CZ conversion coating tended to flake off under vacuum. The coating on the substrate with larger roughness showed less film peeling. A comparison on the area where the coating remained adherent revealed that both the SurTec sample and CZ sample had the similar appearance. The Si-rich phase was still found in the SEM easily, and the EDS line scan mapping showed that the Cr and Zr intensity was at the same level with the matrix. In contrast, the Al-Fe-Cu particle was not be found readily in the SEM image. However, there were some regions with thicker films at which more Cr, Zr, and Fe EDS signals were detected. It is likely that the Al-Fe-Cu particles were below these thicker coating regions. The potentiodynamic polarization results showed that the SurTec and CZ conversion coatings displayed smaller cathodic kinetics than the samples after alkaline cleaning and pickling. Both SurTec and CZ conversion coatings exhibited a passivation region in anodic polarization curves. The cathodic polarization curve of the CZ sample can classified into two types, CZ-1 and CZ-2. The CZ-2 curve was similar to that of the SurTec sample; both showed cathodic inhibition effect. The CZ-1 curve had higher cathodic current density and more negative Tafel slope, indicating a corrosion resistance lower than that of the CZ-2 or SurTec samples. Compared to the CZ sample, the SurTec sample had higher break down potential and smaller cathodic current density at the absolute cathodic potential (-0.85 V vs SCE). Finally, the Cr(III)-coated samples with higher substrate roughness had fewer corrosion spots after NSS test; and, for the substrate with a same surface roughness level, the CZ samples had fewer isolated spots than the SurTec sample. The NSS and polarization results were contradictory. More studies are necessary to understand this discrepancy. | en |
dc.description.provenance | Made available in DSpace on 2021-07-10T22:06:55Z (GMT). No. of bitstreams: 1 ntu-107-R05527008-1.pdf: 19110395 bytes, checksum: 76e3c9b446390561873cea56714c1c5c (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 總目錄
口試委員會審定書 i 誌謝 ii 中文摘要 iii 英文摘要 v 總目錄 viii 圖目錄 xi 表目錄 xix 第一章、前言 1 第二章、文獻回顧 2 2.1 鋁合金簡介 2 2.2 鋁合金命名 3 2.3 鋁合金腐蝕 7 2.3.1 均勻腐蝕 10 2.3.2 局部腐蝕 10 2.3.3 鋁合金負差值效應 18 2.4 航空用鋁合金 19 2.4.1 加工程序與異質相之形成 20 2.4.2 異質相種類 25 2.4.3 7075-T6鋁合金 28 2.4.4 7075鋁合金晶出相 34 2.5 鋁合金的前處理 46 2.5.1 鹼洗 48 2.5.2 酸洗 48 2.5.3 化成處理 48 2.6 電化學 76 2.6.1 動電位極化曲線 76 2.6.2 Pourbaix Diagram簡介 77 第三章、實驗步驟與方法 83 3.1 前處理參數 83 3.2 微結構分析 85 3.2.1 感應耦合電漿質譜分析儀 85 3.2.2 花火發散光譜分析儀 85 3.2.3 掃描式電子顯微鏡 86 3.2.4 穿透式電子顯微鏡 86 3.2.5 能量散佈光譜儀 86 3.2.6 歐傑電子能譜 87 3.2.7 光學顯微鏡 88 3.3 抗蝕性分析 88 3.3.1 開路電位 88 3.3.2 動電位極化曲線 88 3.3.3 鹽霧試驗 89 第四章、實驗結果與討論 90 4.1 7075-T6鋁合金之底材分析 90 4.1.1 化學成分分析 90 4.1.2 表面形貌之分析 90 4.2 酸鹼洗前處理之分析 95 4.2.1 表面形貌之分析 95 4.2.2 極化曲線分析 109 4.3 不同三價鉻化成溶液之分析 112 4.3.1 三價鉻化成溶液 112 4.3.2 表面形貌分析 113 4.3.3 腐蝕行為分析 126 第五章、結論 136 第六章、參考文獻 137 | |
dc.language.iso | zh-TW | |
dc.title | 鋁合金7075-T6之三價鉻化成處理與抗耐蝕性研究 | zh_TW |
dc.title | The Corrosion Resistance of Trivalent Conversion Coating on Aluminum Alloys 7075-T6 | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 林景崎(Jing-Chie Lin),蔡文達(Wen-Ta Tsai),汪俊延(Jun-Yen Uan),葛明德(Ming-Der Ger) | |
dc.subject.keyword | 鋁合金7075-T6,酸鹼洗前處理,三價鉻皮膜化成處理,抗蝕性,晶出相, | zh_TW |
dc.subject.keyword | AA7075-T6,alkaline and pickling pretreatments,trivalent chromium conversion coating,corrosion resistance,constituent particle, | en |
dc.relation.page | 147 | |
dc.identifier.doi | 10.6342/NTU201803317 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2018-08-14 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-R05527008-1.pdf 目前未授權公開取用 | 18.66 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。