請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/7740
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 童世煌 | |
dc.contributor.author | Chien-An Chen | en |
dc.contributor.author | 陳建安 | zh_TW |
dc.date.accessioned | 2021-05-19T17:51:55Z | - |
dc.date.available | 2024-10-17 | |
dc.date.available | 2021-05-19T17:51:55Z | - |
dc.date.copyright | 2019-10-17 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-09-26 | |
dc.identifier.citation | [1] Sun, J.; Zhang, Z.; Yin, X.; Zhou, J.; Yang, L.; Geng, R.; Zhang, F.; Zhu, R.; Yu, J.; Tang, W., High performance non-fullerene polymer solar cells based on PTB7-Th as the electron donor with 10.42% efficiency. J. Mater. Chem. A 2018, 6 (6), 2549-2554.
[2] Fan, Q.; Wang, Y.; Zhang, M.; Wu, B.; Guo, X.; Jiang, Y.; Li, W.; Guo, B.; Ye, C.; Su, W.; Fang, J.; Ou, X.; Liu, F.; Wei, Z.; Sum, T. C.; Russell, T. P.; Li, Y., High-Performance As-Cast Nonfullerene Polymer Solar Cells with Thicker Active Layer and Large Area Exceeding 11% Power Conversion Efficiency. Advanced Materials 2018, 30 (6), 1704546. [3] Sun, C.; Pan, F.; Bin, H.; Zhang, J.; Xue, L.; Qiu, B.; Wei, Z.; Zhang, Z.-G.; Li, Y., A low cost and high performance polymer donor material for polymer solar cells. Nature Communications 2018, 9 (1), 743. [4] Liu, X.; Li, X.; Li, Y.; Song, C.; Zhu, L.; Zhang, W.; Wang, H.-Q.; Fang, J., High-Performance Polymer Solar Cells with PCE of 10.42% via Al-Doped ZnO Cathode Interlayer. Advanced Materials 2016, 28 (34), 7405-7412. [5] Li, S.; Ye, L.; Zhao, W.; Yan, H.; Yang, B.; Liu, D.; Li, W.; Ade, H.; Hou, J., A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells. Journal of the American Chemical Society 2018, 140 (23), 7159-7167. [6] Li, H.; Kim, F. S.; Ren, G.; Jenekhe, S. A., High-Mobility n-Type Conjugated Polymers Based on Electron-Deficient Tetraazabenzodifluoranthene Diimide for Organic Electronics. Journal of the American Chemical Society 2013, 135 (40), 14920-14923. [7] Nikolka, M.; Nasrallah, I.; Rose, B.; Ravva, M. K.; Broch, K.; Sadhanala, A.; Harkin, D.; Charmet, J.; Hurhangee, M.; Brown, A.; Illig, S.; Too, P.; Jongman, J.; McCulloch, I.; Bredas, J.-L.; Sirringhaus, H., High operational and environmental stability of high-mobility conjugated polymer field-effect transistors through the use of molecular additives. Nature Materials 2016, 16, 356. [8] Luo, H.; Yu, C.; Liu, Z.; Zhang, G.; Geng, H.; Yi, Y.; Broch, K.; Hu, Y.; Sadhanala, A.; Jiang, L.; Qi, P.; Cai, Z.; Sirringhaus, H.; Zhang, D., Remarkable enhancement of charge carrier mobility of conjugated polymer field-effect transistors upon incorporating an ionic additive. Science Advances 2016, 2 (5), e1600076. [9] Kang, I.; Yun, H.-J.; Chung, D. S.; Kwon, S.-K.; Kim, Y.-H., Record High Hole Mobility in Polymer Semiconductors via Side-Chain Engineering. Journal of the American Chemical Society 2013, 135 (40), 14896-14899. [10] Lei, T.; Dou, J.-H.; Ma, Z.-J.; Yao, C.-H.; Liu, C.-J.; Wang, J.-Y.; Pei, J., Ambipolar Polymer Field-Effect Transistors Based on Fluorinated Isoindigo: High Performance and Improved Ambient Stability. Journal of the American Chemical Society 2012, 134 (49), 20025-20028. [11] Wang, Y.; Zhu, Y.; Lin, X.; Yang, Y.; Zhang, B.; Zhan, H.; Xie, Z.; Cheng, Y., Efficient non-doped yellow OLEDs based on thermally activated delayed fluorescence conjugated polymers with an acridine/carbazole donor backbone and triphenyltriazine acceptor pendant. J. Mater. Chem. C 2018, 6 (3), 568-574. [12] Crossley, D. L.; Urbano, L.; Neumann, R.; Bourke, S.; Jones, J.; Dailey, L. A.; Green, M.; Humphries, M. J.; King, S. M.; Turner, M. L.; Ingleson, M. J., Post-polymerization C–H Borylation of Donor–Acceptor Materials Gives Highly Efficient Solid State Near-Infrared Emitters for Near-IR-OLEDs and Effective Biological Imaging. ACS Applied Materials & Interfaces 2017, 9 (34), 28243-28249. [13] Jessop, I.; Díaz, F.; Terraza, C.; Tundidor-Camba, A.; Leiva, Á.; Cattin, L.; Bèrnede, J.-C., PANI Branches onto Donor-Acceptor Copolymers: Synthesis, Characterization and Electroluminescent Properties of New 2D-Materials. Polymers 2018, 10 (5), 553. [14] Di Nuzzo, D.; Kulkarni, C.; Zhao, B.; Smolinsky, E.; Tassinari, F.; Meskers, S. C. J.; Naaman, R.; Meijer, E. W.; Friend, R. H., High Circular Polarization of Electroluminescence Achieved via Self-Assembly of a Light-Emitting Chiral Conjugated Polymer into Multidomain Cholesteric Films. ACS Nano 2017, 11 (12), 12713-12722. [15] Lu, C.-F.; Shih, C.-W.; Chen, C.-A.; Chin, A.; Su, W.-F., Tuning the Morphology of Isoindigo Donor–Acceptor Polymer Film for High Sensitivity Ammonia Sensor. Adv. Funct. Mater. 2018, 28 (40), 1803145. [16] Khim, D.; Ryu, G.-S.; Park, W.-T.; Kim, H.; Lee, M.; Noh, Y.-Y., Precisely Controlled Ultrathin Conjugated Polymer Films for Large Area Transparent Transistors and Highly Sensitive Chemical Sensors. Advanced Materials 2016, 28 (14), 2752-2759. [17] Yang, Y.; Zhang, G.; Luo, H.; Yao, J.; Liu, Z.; Zhang, D., Highly Sensitive Thin-Film Field-Effect Transistor Sensor for Ammonia with the DPP-Bithiophene Conjugated Polymer Entailing Thermally Cleavable tert-Butoxy Groups in the Side Chains. ACS Applied Materials & Interfaces 2016, 8 (6), 3635-3643. [18] Yang, T.; Liu, L.; Deng, Y.; Guo, Z.; Zhang, G.; Ge, Z.; Ke, H.; Chen, H., Ultrastable Near-Infrared Conjugated-Polymer Nanoparticles for Dually Photoactive Tumor Inhibition. Advanced Materials 2017, 29 (31), 1700487. [19] Li, D.-D.; Wang, J.-X.; Ma, Y.; Qian, H.-S.; Wang, D.; Wang, L.; Zhang, G.; Qiu, L.; Wang, Y.-C.; Yang, X.-Z., A Donor–Acceptor Conjugated Polymer with Alternating Isoindigo Derivative and Bithiophene Units for Near-Infrared Modulated Cancer Thermo-Chemotherapy. ACS Applied Materials & Interfaces 2016, 8 (30), 19312-19320. [20] Subramaniyan, S.; Xin, H.; Kim, F. S.; Murari, N. M.; Courtright, B. A. E.; Jenekhe, S. A., Thiazolothiazole Donor–Acceptor Conjugated Polymer Semiconductors for Photovoltaic Applications. Macromolecules 2014, 47 (13), 4199-4209. [21] Yu, Z.; Zhang, Y.; Jiang, X.; Li, X.; Lai, J.; Hu, M.; Elawad, M.; Gurzadyan, G. G.; Yang, X.; Sun, L., High-efficiency perovskite solar cells employing a conjugated donor–acceptor co-polymer as a hole-transporting material. RSC Adv. 2017, 7 (44), 27189-27197. [22] Ullah, H.; Bibi, S.; Tahir, A. A.; Mallick, T. K., Donor-acceptor polymer for the design of All-Solid-State dye-sensitized solar cells. Journal of Alloys and Compounds 2017, 696, 914-922. [23] Bin, H.; Gao, L.; Zhang, Z.-G.; Yang, Y.; Zhang, Y.; Zhang, C.; Chen, S.; Xue, L.; Yang, C.; Xiao, M.; Li, Y., 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor. Nature Communications 2016, 7, 13651. [24] Kim, G.-W.; Lee, J.; Kang, G.; Kim, T.; Park, T., Donor–Acceptor Type Dopant-Free, Polymeric Hole Transport Material for Planar Perovskite Solar Cells (19.8%). Advanced Energy Materials 2018, 8 (4), 1701935. [25] Ho, C.-C.; Chen, C.-A.; Chang, C.-Y.; Darling, S. B.; Su, W.-F., Isoindigo-based copolymers for polymer solar cells with efficiency over 7%. J. Mater. Chem. A 2014, 2 (21), 8026-8032. [26] Chen, F.; Jiang, Y.; Sui, Y.; Zhang, J.; Tian, H.; Han, Y.; Deng, Y.; Hu, W.; Geng, Y., Donor–Acceptor Conjugated Polymers Based on Bisisoindigo: Energy Level Modulation toward Unipolar n-Type Semiconductors. Macromolecules 2018, 51 (21), 8652-8661. [27] Gao, Y.; Deng, Y.; Tian, H.; Zhang, J.; Yan, D.; Geng, Y.; Wang, F., Multifluorination toward High-Mobility Ambipolar and Unipolar n-Type Donor–Acceptor Conjugated Polymers Based on Isoindigo. Advanced Materials 2017, 29 (13), 1606217. [28] Zhan, X.; Tan, Z. a.; Domercq, B.; An, Z.; Zhang, X.; Barlow, S.; Li, Y.; Zhu, D.; Kippelen, B.; Marder, S. R., A High-Mobility Electron-Transport Polymer with Broad Absorption and Its Use in Field-Effect Transistors and All-Polymer Solar Cells. Journal of the American Chemical Society 2007, 129 (23), 7246-7247. [29] Yan, Z.; Sun, B.; Li, Y., Novel stable (3E,7E)-3,7-bis(2-oxoindolin-3-ylidene)benzo[1,2-b:4,5-b′]difuran-2,6(3H,7H)-dione based donor–acceptor polymer semiconductors for n-type organic thin film transistors. Chemical Communications 2013, 49 (36), 3790-3792. [30] Yuen, J. D.; Fan, J.; Seifter, J.; Lim, B.; Hufschmid, R.; Heeger, A. J.; Wudl, F., High Performance Weak Donor–Acceptor Polymers in Thin Film Transistors: Effect of the Acceptor on Electronic Properties, Ambipolar Conductivity, Mobility, and Thermal Stability. Journal of the American Chemical Society 2011, 133 (51), 20799-20807. [31] Kronemeijer, A. J.; Gili, E.; Shahid, M.; Rivnay, J.; Salleo, A.; Heeney, M.; Sirringhaus, H., A Selenophene-Based Low-Bandgap Donor–Acceptor Polymer Leading to Fast Ambipolar Logic. Advanced Materials 2012, 24 (12), 1558-1565. [32] Bijleveld, J. C.; Zoombelt, A. P.; Mathijssen, S. G. J.; Wienk, M. M.; Turbiez, M.; de Leeuw, D. M.; Janssen, R. A. J., Poly(diketopyrrolopyrrole−terthiophene) for Ambipolar Logic and Photovoltaics. Journal of the American Chemical Society 2009, 131 (46), 16616-16617. [33] Ashraf, R. S.; Kronemeijer, A. J.; James, D. I.; Sirringhaus, H.; McCulloch, I., A new thiophene substituted isoindigo based copolymer for high performance ambipolar transistors. Chemical Communications 2012, 48 (33), 3939-3941. [34] Ma, Z.; Sun, W.; Himmelberger, S.; Vandewal, K.; Tang, Z.; Bergqvist, J.; Salleo, A.; Andreasen, J. W.; Inganäs, O.; Andersson, M. R.; Müller, C.; Zhang, F.; Wang, E., Structure–property relationships of oligothiophene–isoindigo polymers for efficient bulk-heterojunction solar cells. Energy. Environ. Sci. 2014, 7 (1), 361-369. [35] Li, Y.; Li, Z.; Wang, C.; Li, H.; Lu, H.; Xu, B.; Tian, W., Novel low-bandgap oligothiophene-based donor-acceptor alternating conjugated copolymers: Synthesis, properties, and photovoltaic applications. J. Polym. Sci. A Polym. Chem. 2010, 48 (13), 2765-2776. [36] Fu, B.; Baltazar, J.; Hu, Z.; Chien, A.-T.; Kumar, S.; Henderson, C. L.; Collard, D. M.; Reichmanis, E., High Charge Carrier Mobility, Low Band Gap Donor–Acceptor Benzothiadiazole-oligothiophene Based Polymeric Semiconductors. Chemistry of Materials 2012, 24 (21), 4123-4133. [37] Ichiro, I.; Hitoshi, S.; Yutaka, H., Fine-tuning of electronic properties in donor–acceptor conjugated polymers based on oligothiophenes. Japanese Journal of Applied Physics 2018, 57 (3S2), 03EJ01. [38] Ye, L.; Zhang, S.; Zhao, W.; Yao, H.; Hou, J., Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain. Chemistry of Materials 2014, 26 (12), 3603-3605. [39] Zhang, M.; Gu, Y.; Guo, X.; Liu, F.; Zhang, S.; Huo, L.; Russell, T. P.; Hou, J., Efficient Polymer Solar Cells Based on Benzothiadiazole and Alkylphenyl Substituted Benzodithiophene with a Power Conversion Efficiency over 8%. Advanced Materials 2013, 25 (35), 4944-4949. [40] Zhang, Y.; Hau, S. K.; Yip, H.-L.; Sun, Y.; Acton, O.; Jen, A. K. Y., Efficient Polymer Solar Cells Based on the Copolymers of Benzodithiophene and Thienopyrroledione. Chemistry of Materials 2010, 22 (9), 2696-2698. [41] Moulé, A. J.; Tsami, A.; Bünnagel, T. W.; Forster, M.; Kronenberg, N. M.; Scharber, M.; Koppe, M.; Morana, M.; Brabec, C. J.; Meerholz, K.; Scherf, U., Two Novel Cyclopentadithiophene-Based Alternating Copolymers as Potential Donor Components for High-Efficiency Bulk-Heterojunction-Type Solar Cells. Chemistry of Materials 2008, 20 (12), 4045-4050. [42] Ho, C.-C.; Chang, S.-Y.; Huang, T.-C.; Chen, C.-A.; Liao, H.-C.; Chen, Y.-F.; Su, W.-F., Synthesis, characterization and photovoltaic properties of poly(cyclopentadithiophene-alt-isoindigo). Polymer Chemistry 2013, 4 (20), 5351-5360. [43] Li, M.; An, C.; Pisula, W.; Müllen, K., Cyclopentadithiophene–Benzothiadiazole Donor–Acceptor Polymers as Prototypical Semiconductors for High-Performance Field-Effect Transistors. Accounts of Chemical Research 2018, 51 (5), 1196-1205. [44] Lin, H.-W.; Lee, W.-Y.; Chen, W.-C., Selenophene-DPP donor–acceptor conjugated polymer for high performance ambipolar field effect transistor and nonvolatile memory applications. J. Mater. Chem. 2012, 22 (5), 2120-2128. [45] Lee, W.-H.; Son, S. K.; Kim, K.; Lee, S. K.; Shin, W. S.; Moon, S.-J.; Kang, I.-N., Synthesis and Characterization of New Selenophene-Based Donor–Acceptor Low-Bandgap Polymers for Organic Photovoltaic Cells. Macromolecules 2012, 45 (3), 1303-1312. [46] Alghamdi, A. A. B.; Watters, D. C.; Yi, H.; Al-Faifi, S.; Almeataq, M. S.; Coles, D.; Kingsley, J.; Lidzey, D. G.; Iraqi, A., Selenophene vs. thiophene in benzothiadiazole-based low energy gap donor–acceptor polymers for photovoltaic applications. J. Mater. Chem. A 2013, 1 (16), 5165-5171. [47] Jenekhe, S. A.; Lu, L.; Alam, M. M., New Conjugated Polymers with Donor−Acceptor Architectures: Synthesis and Photophysics of Carbazole−Quinoline and Phenothiazine−Quinoline Copolymers and Oligomers Exhibiting Large Intramolecular Charge Transfer. Macromolecules 2001, 34 (21), 7315-7324. [48] Duan, C.; Chen, K.-S.; Huang, F.; Yip, H.-L.; Liu, S.; Zhang, J.; Jen, A. K. Y.; Cao, Y., Synthesis, Characterization, and Photovoltaic Properties of Carbazole-Based Two-Dimensional Conjugated Polymers with Donor-π-Bridge-Acceptor Side Chains. Chemistry of Materials 2010, 22 (23), 6444-6452. [49] Lai, M.-H.; Tsai, J.-H.; Chueh, C.-C.; Wang, C.-F.; Chen, W.-C., Syntheses of New 3,6-Carbazole-Based Donor/Acceptor Conjugated Copolymers for Optoelectronic Device Applications. Macromolecular Chemistry and Physics 2010, 211 (18), 2017-2025. [50] Zhou, H.; Yang, L.; Stuart, A. C.; Price, S. C.; Liu, S.; You, W., Development of Fluorinated Benzothiadiazole as a Structural Unit for a Polymer Solar Cell of 7 % Efficiency. Angewandte Chemie International Edition 2011, 50 (13), 2995-2998. [51] Wang, X.; Wang, M., Synthesis of donor–acceptor conjugated polymers based on benzo[1,2-b:4,5-b′]dithiophene and 2,1,3-benzothiadiazole via direct arylation polycondensation: towards efficient C–H activation in nonpolar solvents. Polymer Chemistry 2014, 5 (19), 5784-5792. [52] Wang, N.; Chen, Z.; Wei, W.; Jiang, Z., Fluorinated Benzothiadiazole-Based Conjugated Polymers for High-Performance Polymer Solar Cells without Any Processing Additives or Post-treatments. Journal of the American Chemical Society 2013, 135 (45), 17060-17068. [53] Lei, T.; Cao, Y.; Fan, Y.; Liu, C.-J.; Yuan, S.-C.; Pei, J., High-Performance Air-Stable Organic Field-Effect Transistors: Isoindigo-Based Conjugated Polymers. Journal of the American Chemical Society 2011, 133 (16), 6099-6101. [54] Lei, T.; Wang, J.-Y.; Pei, J., Design, Synthesis, and Structure–Property Relationships of Isoindigo-Based Conjugated Polymers. Accounts of Chemical Research 2014, 47 (4), 1117-1126. [55] Zhang, G.; Fu, Y.; Xie, Z.; Zhang, Q., Synthesis and Photovoltaic Properties of New Low Bandgap Isoindigo-Based Conjugated Polymers. Macromolecules 2011, 44 (6), 1414-1420. [56] Wang, E.; Ma, Z.; Zhang, Z.; Vandewal, K.; Henriksson, P.; Inganäs, O.; Zhang, F.; Andersson, M. R., An Easily Accessible Isoindigo-Based Polymer for High-Performance Polymer Solar Cells. Journal of the American Chemical Society 2011, 133 (36), 14244-14247. [57] Ha, J. S.; Kim, K. H.; Choi, D. H., 2,5-Bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-Based Donor–Acceptor Alternating Copolymer Bearing 5,5′-Di(thiophen-2-yl)-2,2′-biselenophene Exhibiting 1.5 cm2·V–1·s–1 Hole Mobility in Thin-Film Transistors. Journal of the American Chemical Society 2011, 133 (27), 10364-10367. [58] Huo, L.; Hou, J.; Chen, H.-Y.; Zhang, S.; Jiang, Y.; Chen, T. L.; Yang, Y., Bandgap and Molecular Level Control of the Low-Bandgap Polymers Based on 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione toward Highly Efficient Polymer Solar Cells. Macromolecules 2009, 42 (17), 6564-6571. [59] Zhu, Y.; Rabindranath, A. R.; Beyerlein, T.; Tieke, B., Highly Luminescent 1,4-Diketo-3,6-diphenylpyrrolo[3,4-c]pyrrole- (DPP-) Based Conjugated Polymers Prepared Upon Suzuki Coupling. Macromolecules 2007, 40 (19), 6981-6989. [60] Piliego, C.; Holcombe, T. W.; Douglas, J. D.; Woo, C. H.; Beaujuge, P. M.; Fréchet, J. M. J., Synthetic Control of Structural Order in N-Alkylthieno[3,4-c]pyrrole-4,6-dione-Based Polymers for Efficient Solar Cells. Journal of the American Chemical Society 2010, 132 (22), 7595-7597. [61] Zou, Y.; Najari, A.; Berrouard, P.; Beaupré, S.; Réda Aïch, B.; Tao, Y.; Leclerc, M., A Thieno[3,4-c]pyrrole-4,6-dione-Based Copolymer for Efficient Solar Cells. Journal of the American Chemical Society 2010, 132 (15), 5330-5331. [62] Guo, X.; Ortiz, R. P.; Zheng, Y.; Kim, M.-G.; Zhang, S.; Hu, Y.; Lu, G.; Facchetti, A.; Marks, T. J., Thieno[3,4-c]pyrrole-4,6-dione-Based Polymer Semiconductors: Toward High-Performance, Air-Stable Organic Thin-Film Transistors. Journal of the American Chemical Society 2011, 133 (34), 13685-13697. [63] Berrouard, P.; Najari, A.; Pron, A.; Gendron, D.; Morin, P.-O.; Pouliot, J.-R.; Veilleux, J.; Leclerc, M., Synthesis of 5-Alkyl[3,4-c]thienopyrrole-4,6-dione-Based Polymers by Direct Heteroarylation. Angewandte Chemie International Edition 2012, 51 (9), 2068-2071. [64] Berrouard, P.; Dufresne, S.; Pron, A.; Veilleux, J.; Leclerc, M., Low-Cost Synthesis and Physical Characterization of Thieno[3,4-c]pyrrole-4,6-dione-Based Polymers. The Journal of Organic Chemistry 2012, 77 (18), 8167-8173. [65] Dong, Y.; Hu, X.; Duan, C.; Liu, P.; Liu, S.; Lan, L.; Chen, D.; Ying, L.; Su, S.; Gong, X.; Huang, F.; Cao, Y., A Series of New Medium-Bandgap Conjugated Polymers Based on Naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole) for High-Performance Polymer Solar Cells. Advanced Materials 2013, 25 (27), 3683-3688. [66] Li, W.; Yan, L.; Zhou, H.; You, W., A General Approach toward Electron Deficient Triazole Units to Construct Conjugated Polymers for Solar Cells. Chemistry of Materials 2015, 27 (18), 6470-6476. [67] Yasuda, T.; Imase, T.; Sasaki, S.; Yamamoto, T., Synthesis, Solid Structure, and Optical Properties of New Thiophene-Based Alternating π-Conjugated Copolymers Containing 4-Alkyl-1,2,4-triazole or 1,3,4-Thiadiazole Unit as the Partner Unit. Macromolecules 2005, 38 (4), 1500-1503. [68] Chu, T.-Y.; Lu, J.; Beaupré, S.; Zhang, Y.; Pouliot, J.-R.; Wakim, S.; Zhou, J.; Leclerc, M.; Li, Z.; Ding, J.; Tao, Y., Bulk Heterojunction Solar Cells Using Thieno[3,4-c]pyrrole-4,6-dione and Dithieno[3,2-b:2′,3′-d]silole Copolymer with a Power Conversion Efficiency of 7.3%. Journal of the American Chemical Society 2011, 133 (12), 4250-4253. [69] Zhou, N.; Guo, X.; Ortiz, R. P.; Harschneck, T.; Manley, E. F.; Lou, S. J.; Hartnett, P. E.; Yu, X.; Horwitz, N. E.; Burrezo, P. M.; Aldrich, T. J.; López Navarrete, J. T.; Wasielewski, M. R.; Chen, L. X.; Chang, R. P. H.; Facchetti, A.; Marks, T. J., Marked Consequences of Systematic Oligothiophene Catenation in Thieno[3,4-c]pyrrole-4,6-dione and Bithiopheneimide Photovoltaic Copolymers. Journal of the American Chemical Society 2015, 137 (39), 12565-12579. [70] Liu, S.; Bao, X.; Li, W.; Wu, K.; Xie, G.; Yang, R.; Yang, C., Benzo[1,2-b:4,5-b′]dithiophene and Thieno[3,4-c]pyrrole-4,6-dione Based Donor-π-Acceptor Conjugated Polymers for High Performance Solar Cells by Rational Structure Modulation. Macromolecules 2015, 48 (9), 2948-2957. [71] Zhu, L.; Wang, M.; Li, B.; Jiang, C.; Li, Q., High efficiency organic photovoltaic devices based on isoindigo conjugated polymers with a thieno[3,2-b]thiophene π-bridge. J. Mater. Chem. A 2016, 4 (41), 16064-16072. [72] Su, Y.-W.; Lin, Y.-C.; Wei, K.-H., Evolving molecular architectures of donor–acceptor conjugated polymers for photovoltaic applications: from one-dimensional to branched to two-dimensional structures. J. Mater. Chem. A 2017, 5 (46), 24051-24075. [73] Yao, Y.; Dong, H.; Hu, W., Ordering of conjugated polymer molecules: recent advances and perspectives. Polymer Chemistry 2013, 4 (20), 5197-5205. [74] Zhu, J.; Han, Y.; Kumar, R.; He, Y.; Hong, K.; Bonnesen, P. V.; Sumpter, B. G.; Smith, S. C.; Smith, G. S.; Ivanov, I. N.; Do, C., Controlling molecular ordering in solution-state conjugated polymers. Nanoscale 2015, 7 (37), 15134-15141. [75] Holland, E. R.; Bloor, D.; Monkman, A. P.; Brown, A.; Leeuw, D. D.; Bouman, M. M.; Meijer, E. W., Effects of order and disorder on field‐effect mobilities measured in conjugated polymer thin‐film transistors. Journal of Applied Physics 1994, 75 (12), 7954-7957. [76] Jeon, G. G.; Lee, M.; Nam, J.; Park, W.; Yang, M.; Choi, J.-H.; Yoon, D. K.; Lee, E.; Kim, B.; Kim, J. H., Simple Solvent Engineering for High-Mobility and Thermally Robust Conjugated Polymer Nanowire Field-Effect Transistors. ACS Applied Materials & Interfaces 2018, 10 (35), 29824-29830. [77] Savikhin, V.; Jagadamma, L. K.; Purvis, L. J.; Robertson, I.; Oosterhout, S. D.; Douglas, C. J.; Samuel, I. D. W.; Toney, M. F., Morphological, Chemical, and Electronic Changes of the Conjugated Polymer PTB7 with Thermal Annealing. iScience 2018, 2, 182-192. [78] Verploegen, E.; Mondal, R.; Bettinger, C. J.; Sok, S.; Toney, M. F.; Bao, Z., Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends. Adv. Funct. Mater. 2010, 20 (20), 3519-3529. [79] Intemann, J. J.; Yao, K.; Yip, H.-L.; Xu, Y.-X.; Li, Y.-X.; Liang, P.-W.; Ding, F.-Z.; Li, X.; Jen, A. K. Y., Molecular Weight Effect on the Absorption, Charge Carrier Mobility, and Photovoltaic Performance of an Indacenodiselenophene-Based Ladder-Type Polymer. Chemistry of Materials 2013, 25 (15), 3188-3195. [80] Kang, H.; Uddin, M. A.; Lee, C.; Kim, K.-H.; Nguyen, T. L.; Lee, W.; Li, Y.; Wang, C.; Woo, H. Y.; Kim, B. J., Determining the Role of Polymer Molecular Weight for High-Performance All-Polymer Solar Cells: Its Effect on Polymer Aggregation and Phase Separation. Journal of the American Chemical Society 2015, 137 (6), 2359-2365. [81] Mei, J.; Bao, Z., Side Chain Engineering in Solution-Processable Conjugated Polymers. Chemistry of Materials 2014, 26 (1), 604-615. [82] Hwang, Y.-J.; Earmme, T.; Subramaniyan, S.; Jenekhe, S. A., Side chain engineering of n-type conjugated polymer enhances photocurrent and efficiency of all-polymer solar cells. Chemical Communications 2014, 50 (74), 10801-10804. [83] Zhang, Z.-G.; Li, Y., Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials. Science China Chemistry 2015, 58 (2), 192-209. [84] Sun, Y.; Zhang, C.; Dai, B.; Lin, B.; Yang, H.; Zhang, X.; Guo, L.; Liu, Y., Side chain engineering and conjugation enhancement of benzodithiophene and phenanthrenequnioxaline based conjugated polymers for photovoltaic devices. J. Polym. Sci. A Polym. Chem. 2015, 53 (16), 1915-1926. [85] Lei, T.; Cao, Y.; Zhou, X.; Peng, Y.; Bian, J.; Pei, J., Systematic Investigation of Isoindigo-Based Polymeric Field-Effect Transistors: Design Strategy and Impact of Polymer Symmetry and Backbone Curvature. Chemistry of Materials 2012, 24 (10), 1762-1770. [86] Guo, X.; Puniredd, S. R.; Baumgarten, M.; Pisula, W.; Müllen, K., Benzotrithiophene-Based Donor–Acceptor Copolymers with Distinct Supramolecular Organizations. Journal of the American Chemical Society 2012, 134 (20), 8404-8407. [87] Zhu, L.; Jiang, C.; Chen, G.; Zhou, Z.; Li, Q., Side chain engineering: The effect on the properties of isoindigo-based conjugated polymers contain different length and structure alkyl chains on nitrogen atom. Organic Electronics 2017, 49, 278-285. [88] Duan, C.; Willems, R. E. M.; van Franeker, J. J.; Bruijnaers, B. J.; Wienk, M. M.; Janssen, R. A. J., Effect of side chain length on the charge transport, morphology, and photovoltaic performance of conjugated polymers in bulk heterojunction solar cells. J. Mater. Chem. A 2016, 4 (5), 1855-1866. [89] Osaka, I.; Saito, M.; Koganezawa, T.; Takimiya, K., Thiophene–Thiazolothiazole Copolymers: Significant Impact of Side Chain Composition on Backbone Orientation and Solar Cell Performances. Advanced Materials 2014, 26 (2), 331-338. [90] Song, K. W.; Song, H. J.; Lee, T. H.; Heo, S. W.; Moon, D. K., An effect on the side chain position of D–π–A-type conjugated polymers with sp2-hybridized orbitals for organic photovoltaics. Polymer Chemistry 2013, 4 (11), 3225-3235. [91] Akkuratov, A. V.; Susarova, D. K.; Moskvin, Y. L.; Anokhin, D. V.; Chernyak, A. V.; Prudnov, F. A.; Novikov, D. V.; Babenko, S. D.; Troshin, P. A., A strong influence of the positions of solubilizing alkyl side chains on optoelectronic and photovoltaic properties of TTBTBTT-based conjugated polymers. J. Mater. Chem. C 2015, 3 (7), 1497-1506. [92] Yang, S.-F.; Liu, Z.-T.; Cai, Z.-X.; Dyson, M. J.; Stingelin, N.; Chen, W.; Ju, H.-J.; Zhang, G.-X.; Zhang, D.-Q., Diketopyrrolopyrrole-Based Conjugated Polymer Entailing Triethylene Glycols as Side Chains with High Thin-Film Charge Mobility without Post-Treatments. Advanced Science 2017, 4 (8), 1700048. [93] Meng, B.; Song, H.; Chen, X.; Xie, Z.; Liu, J.; Wang, L., Replacing Alkyl with Oligo(ethylene glycol) as Side Chains of Conjugated Polymers for Close π–π Stacking. Macromolecules 2015, 48 (13), 4357-4363. [94] Mei, J.; Kim, D. H.; Ayzner, A. L.; Toney, M. F.; Bao, Z., Siloxane-Terminated Solubilizing Side Chains: Bringing Conjugated Polymer Backbones Closer and Boosting Hole Mobilities in Thin-Film Transistors. Journal of the American Chemical Society 2011, 133 (50), 20130-20133. [95] Tsumura, A.; Koezuka, H.; Ando, T., Macromolecular electronic device: Field‐effect transistor with a polythiophene thin film. Applied Physics Letters 1986, 49 (18), 1210-1212. [96] Babel, A.; Jenekhe, S. A., Alkyl chain length dependence of the field-effect carrier mobility in regioregular poly(3-alkylthiophene)s. Synthetic Metals 2005, 148 (2), 169-173. [97] Marrocchi, A.; Lanari, D.; Facchetti, A.; Vaccaro, L., Poly(3-hexylthiophene): synthetic methodologies and properties in bulk heterojunction solar cells. Energy. Environ. Sci. 2012, 5 (9), 8457-8474. [98] McCullough, R. D.; Lowe, R. D., Enhanced electrical conductivity in regioselectively synthesized poly(3-alkylthiophenes). Journal of the Chemical Society, Chemical Communications 1992, (1), 70-72. [99] Shi, C.; Yao, Y.; Yang; Pei, Q., Regioregular Copolymers of 3-Alkoxythiophene and Their Photovoltaic Application. Journal of the American Chemical Society 2006, 128 (27), 8980-8986. [100] Guo, X.; Quinn, J.; Chen, Z.; Usta, H.; Zheng, Y.; Xia, Y.; Hennek, J. W.; Ortiz, R. P.; Marks, T. J.; Facchetti, A., Dialkoxybithiazole: A New Building Block for Head-to-Head Polymer Semiconductors. Journal of the American Chemical Society 2013, 135 (5), 1986-1996. [101] Seo, J. H.; Gutacker, A.; Walker, B.; Cho, S.; Garcia, A.; Yang, R.; Nguyen, T.-Q.; Heeger, A. J.; Bazan, G. C., Improved Injection in n-Type Organic Transistors with Conjugated Polyelectrolytes. Journal of the American Chemical Society 2009, 131 (51), 18220-18221. [102] Duarte, A.; Pu, K.-Y.; Liu, B.; Bazan, G. C., Recent Advances in Conjugated Polyelectrolytes for Emerging Optoelectronic Applications. Chemistry of Materials 2011, 23 (3), 501-515. [103] Lee, M.-H.; Kang, M.; Jeong, H.-G.; Park, J.-J.; Hwang, K.; Kim, D.-Y., Effect of Semi-Fluorinated Alkyl Side Chains on Conjugated Polymers with Planar Backbone in Organic Field-Effect Transistors. Macromol. Rapid. Commun. 2018, 39 (23), 1800431. [104] Kim, H. J.; Han, A. R.; Cho, C.-H.; Kang, H.; Cho, H.-H.; Lee, M. Y.; Fréchet, J. M. J.; Oh, J. H.; Kim, B. J., Solvent-Resistant Organic Transistors and Thermally Stable Organic Photovoltaics Based on Cross-linkable Conjugated Polymers. Chemistry of Materials 2012, 24 (1), 215-221. [105] Chen, X.; Zhang, Z.; Liu, J.; Wang, L., A polymer electron donor based on isoindigo units bearing branched oligo(ethylene glycol) side chains for polymer solar cells. Polymer Chemistry 2017, 8 (36), 5496-5503. [106] Chen, X.; Zhang, Z.; Ding, Z.; Liu, J.; Wang, L., Diketopyrrolopyrrole-based Conjugated Polymers Bearing Branched Oligo(Ethylene Glycol) Side Chains for Photovoltaic Devices. Angewandte Chemie International Edition 2016, 55 (35), 10376-10380. [107] Kanimozhi, C.; Yaacobi-Gross, N.; Burnett, E. K.; Briseno, A. L.; Anthopoulos, T. D.; Salzner, U.; Patil, S., Use of side-chain for rational design of n-type diketopyrrolopyrrole-based conjugated polymers: what did we find out? Physical Chemistry Chemical Physics 2014, 16 (32), 17253-17265. [108] Zhao, X.; Xue, G.; Qu, G.; Singhania, V.; Zhao, Y.; Butrouna, K.; Gumyusenge, A.; Diao, Y.; Graham, K. R.; Li, H.; Mei, J., Complementary Semiconducting Polymer Blends: Influence of Side Chains of Matrix Polymers. Macromolecules 2017, 50 (16), 6202-6209. [109] Zhang, S.; Gao, J.; Wang, W.; Zhan, C.; Xiao, S.; Shi, Z.; You, W., Effect of Replacing Alkyl Side Chains with Triethylene Glycols on Photovoltaic Properties of Easily Accessible Fluorene-Based Non-Fullerene Molecular Acceptors: Improve or Deteriorate? ACS Applied Energy Materials 2018, 1 (3), 1276-1285. [110] Liao, H.-C.; Hsu, C.-P.; Wu, M.-C.; Lu, C.-F.; Su, W.-F., Conjugated Polymer/Nanoparticles Nanocomposites for High Efficient and Real-Time Volatile Organic Compounds Sensors. Analytical Chemistry 2013, 85 (19), 9305-9311. [111] Elsawy, W.; Lee, C.-L.; Cho, S.; Oh, S.-H.; Moon, S.-H.; Elbarbary, A.; Lee, J.-S., Isoindigo-based small molecules for high-performance solution-processed organic photovoltaic devices: the electron donating effect of the donor group on photo-physical properties and device performance. Physical Chemistry Chemical Physics 2013, 15 (36), 15193-15203. [112] Kline, R. J.; McGehee, M. D.; Kadnikova, E. N.; Liu, J.; Fréchet, J. M. J.; Toney, M. F., Dependence of Regioregular Poly(3-hexylthiophene) Film Morphology and Field-Effect Mobility on Molecular Weight. Macromolecules 2005, 38 (8), 3312-3319. [113] Ren, Y.; Hiszpanski, A. M.; Whittaker-Brooks, L.; Loo, Y.-L., Structure–Property Relationship Study of Substitution Effects on Isoindigo-Based Model Compounds as Electron Donors in Organic Solar Cells. ACS Applied Materials & Interfaces 2014, 6 (16), 14533-14542. [114] Osaka, I.; Takimiya, K., Backbone orientation in semiconducting polymers. Polymer 2015, 59, A1-A15. [115] Lee, E.; Hammer, B.; Kim, J.-K.; Page, Z.; Emrick, T.; Hayward, R. C., Hierarchical Helical Assembly of Conjugated Poly(3-hexylthiophene)-block-poly(3-triethylene glycol thiophene) Diblock Copolymers. Journal of the American Chemical Society 2011, 133 (27), 10390-10393. [116] Choo, Y.; Majewski, P. W.; Fukuto, M.; Osuji, C. O.; Yager, K. G., Pathway-engineering for highly-aligned block copolymer arrays. Nanoscale 2018, 10 (1), 416-427. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/7740 | - |
dc.description.abstract | 予體-受體交替共軛高分子被廣泛應用於各種光電元件,諸如高分子太陽能電池、有機場效應電晶體、有機發光二極體。對於這些應用來說,予體-受體交替共軛高分子的電荷遷移率與元件效率表現呈現高度正相關的關係。有兩個關鍵因素影響著電荷遷移率,“奈米微結構的規整度”以及“高分子堆疊方向”。支鏈工程被認為是一種非常有力的技術以創造高度規整奈米微結構的高分子以及調控高分子的堆疊方向。此技術通常涵蓋以下三種參數:(1)支鏈長度(2)支鏈位向(3)支鏈種類。雖然已有大量的支鏈效應的研究對於各種予體-受體交替共軛高分子,但是這些個別的支鏈效應研究是由不同的研究團隊所執行而且難以進行比較。因此,提供一個全面的支鏈效應研究包含上述的三種支鏈參數是非常必要的。在本論文中,我們不僅提供了一個全面的支鏈效應研究還展示了兩種策略透過合理的高分子結構設計利用支鏈工程得到高度規整奈米微結構的高分子以及調控高分子的堆疊方向。
為了執行全面的支鏈效應研究以及創造擁有高度規整奈米微結構的高分子,我們成功合成了八種寡聚噻吩-噻吩并吡咯二酮(3T-TPD)的共軛高分子伴隨著不同的支鏈位向(朝外以及朝內)、支鏈種類(十二碳鏈以及四乙二醇(TEG))、支鏈長度(八碳鏈、六碳鏈、四碳鏈)。這些高分子的光學性質、電化學性質、熱性質以及自組裝行為被系統性地討論。對於這些3T-TPD的共軛高分子來說,擁有支鏈朝外的高分子展現較優異的π-π堆疊相較於支鏈朝內的高分子,導致支鏈朝外的高分子堆疊形成層板(LAM)結構。然而,支鏈朝內的高分子伴隨著差的主鏈平面性堆疊出極為罕見的六角最密堆積(HEX)結構。對於支鏈種類效應來說,不論是支鏈朝外的高分子以及支鏈朝內的高分子具備TEG支鏈展示出較長波長的紫外-可見光吸收光譜以及更高度規整的奈米微結構相較於具備十二碳支鏈的高分子。這些結果指出較為柔軟的TEG支鏈可以有效提升高分子的自組裝行為表現。對於支鏈長度效應來說,越長的支鏈越能幫助支鏈朝外的高分子排列成越高度規整的LAM結構。相反地,越短的支鏈越適合支鏈朝內的高分子自組裝成越高度規整的HEX結構。 更進一步,為了深入研究寡聚醚(OEG)支鏈效應,我們成功合成一系列寡聚噻吩-異靛藍素高分子,P3TI以及P4TI,具備不同數量以及位置的OEG支鏈。這些高分子的光學性質、熱性質以及自組裝行為被系統性地討論。我們發現PnTI的高結晶性是源自於堆疊良好的寡聚噻吩單元。對於僅具備碳鏈支鏈的高分子而言,P3T(R8)I(Rb-16) 以及 P4T(R8)I(Rb-16),這些高分子展現出最高的結晶性但是最大的dπ-π相較於其他具備寡聚醚支鏈的高分子。這些高分子的π-π堆疊行為是由寡聚噻吩單元所主導,因為在異靛藍素上體積龐大的碳鏈(Rb-16)阻礙了異靛藍素的緊密堆疊。當這個異靛藍素上體積龐大的碳鏈(Rb-16)被柔軟且體積小的OEG支鏈取代後,例如P3T(R8)I(E)、P3T(E)I(E)、P4T(R8)I(E)以及P4T(E)I(E),這些高分子的π-π堆疊行為轉變成為異靛藍素單元主導,因為體積小的OEG可以使得異靛藍素堆疊得比寡聚噻吩更緊密,最終犧牲了原本堆疊良好的寡聚噻吩單元。因此,即使這些高分子展現出較小的dπ-π,他們的結晶性也是相對的弱。除此之外,我們發現了OEG支鏈的重要功能-藉由調控高分子的結晶性進而調控高分子的堆疊方向。舉列來說,OEG支鏈成功使得P3TI高分子從輕微緣向排列(edge-on oreintation)改變為完全面相排列(face-on oreintation),此完全面向排列的高分子非常適合應用於太陽能電池。 我們的研究不僅提供了策略以設計具備高度規整奈米微結構的予體-受體交替共軛高分子亦提供了一個方針以調控高分子的堆疊方向,我們期望此研究能對於發展高效能的高分子光電元件有所幫助。 | zh_TW |
dc.description.abstract | Donor-acceptor alternating conjugated polymers (D-A CPs) are widely used in optoelectronic devices, such as polymer solar cells (PSCs), organic field-effect transistors (OFETs), and organic light emitting diodes (OLEDs). For those applications, charge mobility of D-A CPs and device performance are in high-positive correlation. There are two critical factors influence the charge mobility, “regularity of nanostructure” and “polymer packing orientation”. Side chain engineering is a powerful technique to create polymers with highly ordered nanostructure and to control the polymer packing orientation. The technique usually involves three parameters: (1) side chain length, (2) side chain location and (3) side chain type. Although there are lots of side chain effect studies in D-A CPs, those studies are carried out from different research groups and each individual side chain effect study is difficult to do comparison. Therefore, to provide a comprehensive side chain effect study including three parameters is necessary. In this dissertation, we not only provided a comprehensive side chain effect study but also demonstrated two strategies to obtain the polymer with highly ordered nanostructure and to control the polymer packing orientation respectively through rational design of polymer using side chain engineering.
In order to do a comprehensive side chain effect study and to create polymers with highly ordered nanostructure, we successfully synthesized eight oligothiophene-thienopyrroledione (3T-TPD) based CPs with different side chain location (outward and inward), type (dodecyl and tetraethylene glycol (TEG)), and length (octyl, hexyl, and butyl). Those polymer’s optical properties, electrochemical properties, thermal properties, and self-assembly behavior had been systematically studied. For 3T-TPD based CPs, outward series polymers show better π-π stacking than inward series polymers, leading to pack into lamellae (LAM) structure. However, inward series polymers with poor coplanarity of backbone pack into rarely found hexagonal (HEX) structure. For side chain type effect, both the outward series polymers and inward series polymers with TEG chains show longer wavelength of λmax of UV-Vis absorption and higher order of the nanostructure than the polymers with dodecyl chains. These results reveal that the more flexible TEG chain can enhance the self-assembly behavior of the polymers. For side chain length effect, the outward series polymers have higher order of LAM with longer side chain. On the contrary, shorter side chain is more suitable for inward series polymers to self-assemble into higher order of HEX. Furthermore, in order to investigate oligo(ethylene glycol) (OEG) side chain effect in depth, we successfully synthesized a series of oligothiophene-isoindigo based polymers, P3TI and P4TI, by varying amount and location of OEG side chain. Their optical properties, thermal properties, and morphologies are systematically studied. High crystallization capability of PnTI polymers is mainly contributed from the stable stacking of oligothiophene unit. For the polymers with all alkyl side chains, P3T(R8)I(Rb-16) and P4T(R8)I(Rb-16), they show the highest crystallinity but the largest dπ-π among each series polymers. Their π-π stacking behavior is dominated by oligothiophene unit because the bulky alkyl side chains (Rb-16) on isoindigo unit prohibit close packing of isoindigo unit. As the bulky Rb-16 side chains on isoindigo unit are replaced by linear and flexible OEG side chains, i.e. P3T(R8)I(E), P3T(E)I(E), P4T(R8)I(E), and P4T(E)I(E), their π-π stacking behavior is dominated by isoindigo unit because isoindigo unit with small size of OEG side chains can stack more closely than oligothiophene unit, resulting in a sacrifice for stable stacking of oligothiophene unit. Therefore, even though they show relatively short dπ-π, their crystallinity is relatively low. In addition, OEG side chains are capable of controlling the packing orientation of the polymers by adjusting the crystallinity of the polymers. For instance, OEG side chains change the packing orientation of P3TI polymers from slightly edge-on orientation of P3T(R8)I(Rb-16) to fully face-on orientation of P3T(R8)I(E) and P3T(E)I(E) which is suitable for polymer solar cell application. Our studies not only provide a strategy to design a D-A CPs with highly ordered nanostructure but also provide a guide to control the polymer packing orientation for potential application in high performance optoelectronic devices. | en |
dc.description.provenance | Made available in DSpace on 2021-05-19T17:51:55Z (GMT). No. of bitstreams: 1 ntu-108-D02549009-1.pdf: 12006664 bytes, checksum: 425442c05a0c171e6f0c9678128d0628 (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 口試委員審定書……………………………………………………………………….i
致謝……………………………………………………………………………………ii 摘要 iii Abstract v Table of Content ix List of Figures xi List of Tables xix Chapter 1 Introduction 1 1.1 Development of Donor-Acceptor Alternating Conjugated Polymer 1 1.2 Relationship between Morphology of Donor-acceptor Alternating Conjugated Polymer and Device Performance 6 1.3 Side Chain Engineering 12 1.4 Motivation and Objective 17 Chapter 2 Results and Discussion 19 2.1 Oligothiophene-TPD based Conjugated Polymers 19 2.1.1 Molecular Orbital Computation 20 2.1.2 Optical Properties 24 2.1.3 Electrochemical Properties 28 2.1.4 Thermal Properties 30 2.1.5 Morphology Study 33 2.1.6 Model for Self-assembly Behavior 40 2.1.7 Summary 42 2.2 Oligothiophene-isoindigo based Conjugated Polymers 44 2.2.1 Optical Properties 45 2.2.2 Thermal Properties 47 2.2.3 Morphology Study 50 2.2.4 Summary 58 Chapter 3 Conclusions 60 Chapter 4 Recommendations 63 Chapter 5 Experimental Section 67 5.1 Chemical and Instrument 67 5.2 Material Preparation 72 5.2.1 Oligothiophene-TPD based Conjugated Polymers 72 5.2.2 Oligothiophene-isoindigo based Conjugated Polymers 126 5.3 Sample Preparation and Characterization 162 References 166 | |
dc.language.iso | en | |
dc.title | 支鏈效應於予體-受體交替共軛高分子的物理性質以及形態學之研究 | zh_TW |
dc.title | Side Chain Effects on the Physical Properties and Morphologies of Donor-Acceptor Alternating Conjugated Polymers | en |
dc.type | Thesis | |
dc.date.schoolyear | 108-1 | |
dc.description.degree | 博士 | |
dc.contributor.coadvisor | 林唯芳 | |
dc.contributor.oralexamcommittee | 廖文彬,詹益慈,羅世強 | |
dc.subject.keyword | 予體-受體,奈米微結構,堆疊方向,支鏈工程,寡聚醚,自組裝,結晶, | zh_TW |
dc.subject.keyword | donor-acceptor,nanostructure,packing orientation,side chain engineering,oligo(ethylene glycol),self-assembly,crystallization, | en |
dc.relation.page | 188 | |
dc.identifier.doi | 10.6342/NTU201904150 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2019-09-26 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 高分子科學與工程學研究所 | zh_TW |
dc.date.embargo-lift | 2024-10-17 | - |
顯示於系所單位: | 高分子科學與工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 此日期後於網路公開 2024-10-17 | 11.73 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。