請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/76721
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 呂宗昕 | |
dc.contributor.author | Guan-Rong Chen | en |
dc.contributor.author | 陳冠榮 | zh_TW |
dc.date.accessioned | 2021-07-10T21:35:39Z | - |
dc.date.available | 2021-07-10T21:35:39Z | - |
dc.date.copyright | 2016-10-14 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-08-01 | |
dc.identifier.citation | [1] P. Tans, R. Keeling, Trends in Atmospheric Carbon Dioxide, www.esrl.noaa.gov/gmd/ccgg/trends/.
[2] Arvizu, D., P. Balaya, L. Cabeza, T. Hollands, A. J. Waldau, M. Kondo, C. Konseibo, V. Meleshko, W. Stein, Y. Tamaura, H. Xu, R. Zilles, Renewable Energy Sources and Climate Change Mitigation Special Report of the Intergovernmental Panel on Climate Change, Cambridge University Press, 2011, Chapter 3: Direct Solar Energy. [3] E. Bacquerel and Comptes Rendues, Mémoire sur les effets électriques produits sous l'influence des rayons solaires, 9 (1839) 561–567. [4] M. D. Archer and R. Hill, The past and present. In: Clean electricity from photovoltaics, Imperial College Press, London, 2001. [5] International Energy Agency, Solar Energy Perspectives: Executive Summary, 2011. [6] ASTM, ASTM International, G173-03 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, West Conshohocken, PA, 2012. [7] ASTM , ASTM International, E490-00a Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables, West Conshohocken, PA, 2014. [8] F. A. Carey, and R. J. Sundberg, Advanced Organic Chemistry, Springer, 5th edn, 2007, Part A: Structure and Mechanisms. [9] J. Shi , X. Xu , D. Li, and Q. Meng, Interfaces in Perovskite Solar Cells, Small, 11 (2015) 2472–2486. [10] C. J. brabec, V. Dyakonov, J. Parisi, and N. S. Sariciftci, Organic Photovoltaics, Springer 2003. [11] M. D. Perez, C. Borek, S. R. Forrest, and M. E. Thompson, Molecular and Morphological Influences on the Open Circuit Voltages of Organic Photovoltaic Devices, J. Am. Chem. Soc.,131 (2009) 9281–9286. [12] K. Vandewal, K. Tvingstedt, A. Gadisa, O. Inganäs, and J. V. Manca, On the origin of the open-circuit voltage of polymer–fullerene solar cells, Nat. Mat., 8 (2009) 904–909. [13] W. L. Ma, C. Y. Yang, X. Gong, K. Lee, A. J. Heeger, Thermally Stable, Efficient Polymer Solar Cells with NanoscaleControl of the Interpenetrating Network Morphology, Adv. Funct. Mater., 15 (2005) 1617–1622. [14] Z. Jianhua, W. Aihua, and A. G. Martin, 24.5% efficiency Silicon PERT Cells on MCZ Substrates and 24.7% efficiency PERL Cells on FZ Substrates, Progress in Photovoltaics: Research and Applications, 7 (1999) 471–474. [15] P. Jackson, D. Hariskos, R. Wuerz, W. Wischmann, and M. Powalla, Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%, Physica Status Solidi (RRL) 8, 3 (2014) 219–222. [16] NREL, Research Cell Efficiency Records, 2016, http://www.nrel.gov/ncpv/. [17] K. Kakiage, Y. Aoyama, T. Yano, K. Oya, J. I. Fujisawa, and M. Hanaya, Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes, Chem. Commun., 51 (2015) 15894–15897. [18] A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells, J. Am. Chem. Soc., 131 (2009) 6050–6051. [19] H. S. Kim, C. R. Lee, J. H. Im, K. B. Lee, T. Moehl, A. Marchioro, S. J. Moon, R. H. Baker, J. H. Yum, J. E. Moser, M. Grätzel, and N. G. Park, Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%, Sci. Rep., 2 (2012) 591. [20] M. M. Lee, J. Teuscher, T. Miyasaka, T. N. Murakami, H. J. Snaith, Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites, Science, 338 (2012) 643–647. [21] W. S. Yang, J. H. Noh, N. J. Jeon, Y. C. Kim, S. Ryu, J. Seo, S. I. Seok, High-performance photovoltaic perovskite layers fabricated through intramolecular exchange, Science, 348 (2015) 1234–1237. [22] Z. Cheng, and J. Lin, Layered organic–inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering, CrystEngComm, 12 (2010) 2646–2662. [23] T. Salim, S. Sun, Y. Abe, A. Krishna, A. C. Grimsdalea, and Y. M. Lam, Perovskite-based solar cells: impact of morphology and device architecture on device performance, J. Mater. Chem. A, 3 (2015) 8943–8969. [24] Y. Dinga, X. Yao, X. Zhang, C. Wei, Y. Zhao, Surfactant enhanced surface coverage of CH3NH3PbI3−xClx perovskite for highly efficient mesoscopic solar cells, J. Power Sources, 272 (2014) 351–355. [25] J. Burschka, N. Pellet, S. J. Moon, R. Humphry-Baker, P. Gao, M. K. Nazeeruddin, M. Grätzel, Sequential deposition as a route to high-performance perovskite-sensitized solar cells, Nature, 499 (2013) 316–319. [26] M. Xiao, F. Huang, W. Huang, Y. Dkhissi, Y. Zhu, J. Etheridge, A. Gray-Weale, U. Bach, Y. B. Cheng, and L. Spiccia, A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells, Angew. Chem. Int. Ed., 53 (2014) 9898–9903. [27] N. J. Jeon, J. H. Noh, Y. C. Kim,W. S. Yang, S. Ryu, and S. I. Seok, Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells, Nat. Mat. 13 (2014) 897–903. [28] M. Liu, M. B. Johnston, and H. J. Snaith, Efficient planar heterojunction perovskite solar cells by vapour deposition, Nature, 501 (2013) 395–398. [29] C. W. Chen , H. W. Kang , S. Y. Hsiao , P. F. Yang , K. M. Chiang ,and H. W. Lin, Efficient and Uniform Planar-Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition, Adv. Mater., 26 (2014) 6647–6652. [30] Q. Chen, H. Zhou, Z. Hong, S. Luo, H. S. Duan, H. H. Wang, Y. Liu, G. Li, and Y. Yang, Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process, J. Am. Chem. Soc., 136 (2014) 622–625. [31] L. C. Chen, C. C. Chen, J. C. Chen, C. G. Wu, Annealing effects on high-performance CH3NH3PbI3 perovskite solar cells prepared by solution-process, Solar Energy, 122 (2015) 1047–1051. [32] C. Sun, Y. P. Guo, H. Duan, Y. Chen,Y. L. Guo, H. Li, H. Liu, Solvent-assisted growth of organic–inorganic hybrid perovskites with enhanced photovoltaic [33] Z. Xiao, C. Bi, Y. Shao, Q. Dong, Q. Wang, Y. Yuan, C. Wang, Y. Gao, and J. Huang, Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers, Energy Environ. Sci., 7 (2014) 2619–2623. [34] A. Dualeh, N. Tétreault, T. Moehl, P. Gao , M. K. Nazeeruddin, and M. Grätzel, Effect of Annealing Temperature on Film Morphology of Organic–Inorganic Hybrid Perovskite Solid-State Solar Cells, Adv. Funct. Mater., 24 (2014) 3250–3258. [35] G. E. Eperon, V. M. Burlakov, P. Docampo , A. Goriely, and H. J. Snaith, Morphological Control for High Performance, Solution-Processed Planar Heterojunction Perovskite Solar Cells, Adv. Funct. Mater., 24 (2014) 151–157. [36] S. H. Chang, K. F. Lin, H. M. Cheng, C. C. Chen, W. T. Wu, W. N. Chen, P. J. Wu, S. H. Chen, and C. G. Wu, Influence of organic cations on high-performance CH3NH3PbI3 based photovoltaics, Sol. Energy Mater. Sol. Cells, 145 (2016) 375–381. [37] C. Roldán-Carmona, P. Gratia, I. Zimmermann, G. Grancini, P. Gao, M. Grätzel, and M. K. Nazeeruddin, High efficiency methylammonium lead triiodide perovskite solar cells: the relevance of non-stoichiometric precursors, Energy Environ. Sci., 8 (2015), 3550–3556. [38] Q. Wang, Y. Shao, Q. Dong, Z. Xiao, Y. Yuan, and J. Huang, Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process, Environ. Sci., 7 (2014) 2359–2365. [39] M. Yang, Y. Zhou, Y. Zeng, C. S. Jiang, N. P. Padture, and K. Zhu, Square-Centimeter Solution-Processed Planar CH3NH3PbI3 Perovskite Solar Cells with Efficiency Exceeding 15%, Adv. Mater., 27 (2015) 6363–6370. [40] S. Pathak, A.o Sepe, A. Sadhanala, F. Deschler, A. Haghighirad, N. Sakai, K. C. Goedel, S. D. Stranks, N. Noel, M. Price, S. Hüttner, N. A. Hawkins, R. H. Friend, U. Steiner, and H. J. Snaith, Atmospheric Influence upon Crystallization and Electronic Disorder and Its Impact on the Photophysical Properties of Organic-Inorganic Perovskite Solar Cells, ACS Nano, 9 (2015) 2311−2320. [41] Q. Chen, H. Zhou, T. B. Song, S. Luo, Z. Hong, H. S. Duan, L. Dou, Y. Liu, and Y. Yang, Controllable Self-Induced Passivation of Hybrid Lead Iodide Perovskites toward High Performance Solar Cells, Nano Lett. 14 (2014) 4158−4163. [42] Y. Xie, F. Shao, Y. Wang, T. Xu, D. Wang, and F. Huang, Enhanced Performance of Perovskite CH3NH3PbI3 Solar Cell by Using CH3NH3I as Additive in Sequential Deposition, ACS Appl. Mater. Interfaces, 7 (2015) 12937−12942. [43] F. Liu, Q. Dong, M. K. Wong, A. B. Djurišić, A. Ng, Z. Ren, Q. Shen, C. Surya, W. K. Chan, J. Wang, A. M. C. Ng , C. Liao , H. Li, K. Shih, C. Wei, H. Su, and J. Dai, Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?, Adv. Energy Mater., 6 (2016) 1502206. [44] T. Baikie, Y. Fang, J. M. Kadro, M. Schreyer, F. Wei, S. G. Mhaisalkar, M. Grätzel, and T. J. White, Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications, J. Mater. Chem. A, 1 (2013) 5628–5641. [45] N. G. Park, Perovskite solar cells: an emerging photovoltaic technology, Mater. Today, 18 (2015) 65−72. [46] C. C. Stoumpos, C. D. Malliakas, and M. G. Kanatzidis, Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties, Inorg. Chem., 52 (2013) 9019−9038. [47] M. Guo, K. Xie, J. Lin, Z. Yong, C. T. Yip, L. Zhou, Y. Wang, and H. Huang, Design and coupling of multifunctional TiO2 nanotube photonic crystal to nanocrystalline titania layer as semi-transparent photoanode for dye-sensitized solar cell, Energy Environ. Sci., 5 (2012) 9881–9888. [48] S. D. Stranks, G. E. Eperon, G. Grancini, C. Menelaou, M. J. P. Alcocer, T. Leijtens, L. M. Herz, A. Petrozza, and H. J. Snaith, Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber., Science, 342 (2013) 341–344. [49] G. Xing, N. Mathews, S. Sun, S. S. Lim, Y. M. Lam, M. Grätzel, S. Mhaisalkar and T. C. Sum, Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI3., Science, 2013, 342, 344–347. [50] D. Liu, M. K. Gangishetty, and T. L. Kelly, Effect of CH3NH3PbI3 thickness on device efficiency in planar heterojunction perovskite solar cells, J. Mater. Chem. A, 2 (2014) 19873–19881. [51] J. W. Jung, S. T. Williams, and A. K.-Y. Jen, Low-temperature processed high-performance flexible perovskite solar cells via rationally optimized solvent washing treatments, RSC Advances, 4 (2014) 62971−62977. [52] K. F. Lin, S. H. Chang, K. H. Wang, H. M. Cheng, K. Y. Chiu, K. M. Lee, S. H. Chen, C. G. Wu, Unraveling the high performance of tri-iodide perovskite absorber based photovoltaics with a non-polar solvent washing treatment, Sol. Energy Mater. Sol. Cells, 141 (2015) 309–314. [53] W. Nie, H. Tsai, R. Asadpour, J. C. Blancon, A. J. Neukirch, G. Gupta, J. J. Crochet, M. Chhowalla, S. Tretiak, M. A. Alam, H. L. Wang, A. D. Mohite, High-efficiency solution-processed perovskite solar cells with millimeter-scale grains, Science, 347 (2015) 522–524. [54] D. H. Cao, C. C. Stoumpos, C. D. Malliakas, M. J. Katz, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?, APL Mater., 2 (2014) 091101. [55] Y. H. Lee, J. Luo, R. Humphry-Baker, P. Gao, M. Grätzel, and M. K. Nazeeruddin, Unraveling the Reasons for Efficiency Loss in Perovskite Solar Cells, Adv. Funct. Mater., 25 (2015) 3925–3933. [56] Y. Ogomi, K. Kukihara, S. Qing, T. Toyoda, K. Yoshino, S. Pandey, H. Momose, and S. Hayase, Control of Charge Dynamics through a Charge-Separation Interface for All-Solid Perovskite-Sensitized Solar Cells, ChemPhysChem, 15 (2014) 1062–1069. [57] S. Dongaonkar, J. D. Servaites, G. M. Ford, S. Loser, J. Moore1, R. M. Gelfand, H. Mohseni, H. W. Hillhouse, R. Agrawal, M. A. Ratner, T. J. Marks, M. S. Lundstrom, and M. A. Alam, Universality of non-Ohmic shunt leakage in thin-film solar cells, J. Appl. Phys., 108 (2010) 124509. [58] S. S. Hegedus, and W. N. Shafarman, Thin-Film Solar Cells: Device Measurements and Analysis, Res. Appl., 12 (2004) 155–176. [59] J.E. Phillips, R. W. Birkmire, B. E. McCandless, P. V. Meyers, and W. N. Shafarman, Polycrystalline heterojunction solar cells: A device perspective, Physica Status Solidi B, 194 (1996) 31–39. [60] T. Oku, Solar Cells - New Approaches and Reviews, Licensee InTech, 2015, Chapter 3: Crystal Structures of CH3NH3PbI3 and Related Perovskite Compounds Used for Solar Cells. [61] K. Yan, M. Long, T. Zhang, Z. Wei, H. Chen, S.Yang, and J. Xu, Hybrid Halide Perovskite Solar Cell Precursors: Colloidal Chemistry and Coordination Engineering behind Device Processing for High Efficiency, J. Am. Chem. Soc., 137 (2015) 4460−4468. [62] Y. Tidhar, E. Edri, H. Weissman, D. Zohar, G. Hodes, D. Cahen, B. Rybtchinski, and S. Kirmayer, Crystallization of Methyl Ammonium Lead Halide Perovskites: Implications for Photovoltaic Applications, J. Am. Chem. Soc., 136 (2014) 13249−13256. [63] Y. Zhou, O. S. Game, S. Pang, and N. P. Padture, Microstructures of Organometal Trihalide Perovskites for Solar Cells: Their Evolution from Solutions and Characterization, J. Phys. Chem. Lett., 6 (2015) 4827−4839. [64] C. Bi, Q. Wang, Y. Shao, Y. Yuan, Z. Xiao, and J. Huang, Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells, Nat. Comm., 6 (2015) 7747. [65] Y. C. Kim, N. J. Jeon, J. H. Noh, W. S. Yang, J. Seo, J. S. Yun, A. Ho-Baillie, S. Huang , M. A. Green, J. Seidel, T. K. Ahn, and S. I. Seok, Beneficial Effects of PbI2 Incorporated in Organo-Lead Halide Perovskite Solar Cells, Adv. Energy Mater., 6 (2016) 1502104. [66] S. M. Sze and K. K. Ng, Physics of Semiconductor Devices, 3rd ed., Wiley, New York, 2006. [67] Y. Wu, X. Yang, H. Chen, K. Zhang, C. Qin, J. Liu, W. Peng, A. Islam, E. Bi, F. Ye, M. Yin, P. Zhang, and L. Han, Highly compact TiO2 layer for efficient hole-blocking in perovskite solar cells, Applied Physics Express, 7 (2014) 052301. [68] C.H. Chiang, and C. G. Wu, Bulk heterojunction perovskite–PCBM solar cells with high fill factor, 10 (2016) 196−200. C. J. brabec, V. Dyakonov, J. Parisi, and N. S. Sariciftci, Organic Photovoltaics, Springer 2003. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/76721 | - |
dc.description.abstract | 本研究第一部分以反溶劑法結合快速長晶製程,經退火處理製備高結晶性之CH3NH3PbI3薄膜。藉由改變CH3NH3PbI3薄膜厚度及退火溫度,探討二者對於CH3NH3PbI3薄膜及太陽能電池元件之影響。在薄膜厚度升高時,由於光吸收效率增加,使得轉換效率提升至14.86%。當薄膜厚度大於載子擴散距離時,會造成載子於光吸收層內發生再結合現象,導致轉換效率下降。在最佳化之CH3NH3PbI3薄膜之厚度下,進行退火溫度對CH3NH3PbI3薄膜及元件特性的分析。在80℃的退火溫度下,CH3NH3PbI3薄膜之表面形貌與一般常見之100℃的條件相似,使其亦可表現出與100℃之退火條件相當的轉換效率。此結果顯示利用反溶劑法並結合快速長晶製程,CH3NH3PbI3薄膜可於較低之退火溫度製備,增加其應用於軟性基板之潛力。
第二部分透過改變甲基碘化胺(CH3NH3I)及二氧化鉛(PbI2)於前驅液中之比率,研究其比率(m)對CH3NH3PbI3薄膜之材料特性與元件之光電特性的影響。當m值由0.8增加至1.0時,可促進反應生成CH3NH3PbI3,使其結晶性提升,薄膜晶粒之大小及光吸收率亦有上升的趨勢。晶粒大小的提升減小了載子於晶界發生再結合的機率,而吸收率的提升使得光生載子數增加,使得元件之電性表現會隨著m值的增加而上升。故在m = 1時,具有最佳的元件光電轉換效率。當m 值增加至1.2時,薄膜粗糙的表面形貌與不均勻覆蓋使得於吸收層與電洞傳輸層間之載子再結合機率提高,造成元件電性表現劣化。由本研究結果顯示,透過調控反應前驅液之組成比例,可有效改善CH3NH3PbI3薄膜及電池元件之光電特性。 | zh_TW |
dc.description.abstract | In the first part of this study, the fast crystallization process with anti-solvent method and post-annealing treatment were conducted to prepare CH3NH3PbI3 thin film. The thickness of CH3NH3PbI3 thin film and temperatures of post-annealing treatment were changed to investigate the effects on the morphology and photovoltaic properties of the obtained thin films and solar cells. When the thickness of thin film was increased, the conversion efficiency was up to 14.86% due to the increase of light harvesting efficiency. As the CH3NH3PbI3 film thickness was further increased, the film thickness exceeded the carrier diffusion length, resulting in carrier recombination. Hence, the conversion efficiency of the fabricated solar cells were decreased. When the annealing temperature was conducted at 80℃, the photovoltaic properties of solar devices fabricated with CH3NH3PbI3 thin film was similar to which conducted at 100℃ owing to the slight change in morphology of CH3NH3PbI3 thin film. Using fast crystallization process with anti-solvent method, low-temperature annealing produced high efficiency solar devices, increasing the potential to application of flexible substrates.
In the second part of this study, the properties of CH3NH3PbI3 thin films prepared with various molar ratios of CH3NH3I and PbI2 were investigated. The molar ratios of CH3NH3I to PbI2 were denoted as m. As the value of m was increased from 0.8 to 1.0, the conversion of PbI2 to CH3NH3PbI3 was promoted. The increasing CH3NH3PbI3 compound enhanced the crystallinity, grain size and absorptance of CH3NH3PbI3 thin films. Large grain size reduced the carrier recombination at grain boundary. The improved absorptance increased the photo-generated carriers. Hence, the conversion efficiency was increased with the value of m increasing. As value of m equaled to 1, the fabricated CH3NH3PbI3 solar device showed optimized efficiency. However, once the value of m increased from 1.0 to 1.2, the rough surface and poor coverage of CH3NH3PbI3 thin films increased the carrier recombination between absorber layers and hole-transport layers, resulting in dramatic decrease in conversion efficiency. This investigation showed that the photovoltaic properties of CH3NH3PbI3 devices were improved effectively with well-controlled composition of CH3NH3PbI3 precursor. | en |
dc.description.provenance | Made available in DSpace on 2021-07-10T21:35:39Z (GMT). No. of bitstreams: 1 ntu-105-R03524054-1.pdf: 4631135 bytes, checksum: 95050eacfdf5275abe0e86ccc5dcd500 (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 摘要 i
Abstract ii 目錄 iv 表目錄 vii 圖目錄 viii 第一章 緒論 1 1.1 前言 1 1.2 太陽能電池發展 2 1.3 太陽能電池相關原理 2 1.3.1 太陽光譜 2 1.3.2 運作原則 3 1.3.3 元性特性參數 4 1.4 太陽電電池材料與種類 5 1.4.1 太陽能電池種類 5 1.4.2 有機太陽能電池 6 1.5 鈣鈦礦太陽能電池 7 1.5.1 鈣鈦礦材料結構 7 1.5.2 鈣鈦礦太陽能電池的元件結構 7 1.5.3 鈣鈦礦吸收層製程 8 1.5.3.1 一步驟溶液沉積法 9 1.5.3.2 二步驟溶液沉積法 9 1.5.3.3反溶劑法 9 1.5.3.4 真空蒸鍍法 10 1.5.3.5 氣相輔助溶液沉積法 10 1.6 文獻回顧 10 1.6.1 退火溫度參數影響 10 1.6.2 前驅液比例參數影響 11 1.7 研究動機 12 第二章 實驗方法 24 2.1 CH3NH3PbI3鈣鈦礦太陽能電池的製備 24 2.1.1 電子傳輸層的製備 24 2.1.2 光吸收層的製備 24 2.1.2.1 CH3NH3PbI3前驅液濃度及退火溫度參數調控 24 2.1.2.2 CH3NH3PbI3前驅液比率參數調控 24 2.1.3 電洞傳輸層及上電極的製備 25 2.2 CH3NH3PbI3鈣鈦礦薄膜及太陽能電池之特性分析 25 第三章 CH3NH3PbI3前驅液濃度及退火溫度對鈣鈦礦太陽能電池之吸收層結構及元件的影響 28 3.1 前驅液濃度對鈣鈦礦太陽能電池的影響 28 3.2 鈣鈦礦材料在不同退火溫度下的物理分析 30 3.3 鈣鈦礦太陽能電池的光電特性分析 31 第四章 CH3NH3PbI3前驅液比例對鈣鈦礦太陽能電池之吸收層特性及元件的影響 48 4.1 前驅液比率對鈣鈦礦材料的晶相結構及表面顯微結構 48 4.2 前驅物比例對鈣鈦礦太陽能電池的電性分析 50 4.3 鈣鈦礦太陽能電池的二極體分析 51 第五章 結論 66 參考文獻 68 | |
dc.language.iso | zh-TW | |
dc.title | 鈣鈦礦太陽能電池之光吸收層材料製備與特性分析 | zh_TW |
dc.title | Preparation and Characterization of Absorber Layers Used in Perovskite Solar Cells | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 陳啟東,黃文正 | |
dc.subject.keyword | 鈣鈦礦,太陽能電池,退火溫度,吸收層厚度,甲基碘化胺,二氧化鉛, | zh_TW |
dc.subject.keyword | perovskite,solar cell,annealing temperature,thickness,methylammonium iodide,lead(II) iodide, | en |
dc.relation.page | 79 | |
dc.identifier.doi | 10.6342/NTU201601656 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2016-08-02 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-R03524054-1.pdf 目前未授權公開取用 | 4.52 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。