請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74815
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林法勤(Far-Ching Lin) | |
dc.contributor.author | Ming-Cheng Huang | en |
dc.contributor.author | 黃名正 | zh_TW |
dc.date.accessioned | 2021-06-17T09:08:06Z | - |
dc.date.available | 2029-11-21 | |
dc.date.copyright | 2019-12-02 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-11-21 | |
dc.identifier.citation | 王松永 (1983) 商用木材。中華林產事業協會。377頁。
王松永 (1993) 木材物理學。徐氏文教基金會。816頁。 王松永、丁昭義 (1984) 林產學。臺灣商務印書館。639頁。 王松永、夏榮生 (1990) 台灣主要經濟樹種材質之基礎研究(VII):長尾尖櫧、光腊樹及台灣櫸之比重、收縮率、纖維飽和點之變異性。林產工業 9: 1-22。 王明光、王敏昭 (2008) 實用儀器分析。合計圖書出版社。692頁。 呂福原、歐辰雄 (1998) 台灣樹木解說(二)。行政院農業委員會。207頁。 劉業經、呂福原、歐辰雄 (1988) 臺灣樹木誌。國立中興大學農學院出版委員會。1019頁。 劉業經、呂福原、歐辰雄 (1994) 臺灣樹木誌。國立中興大學農學院出版委員會。925頁。 鍾詩文 (2017) 台灣原生植物全圖鑑(第四卷)。貓頭鷹出版社。416頁。 廉婕 (2015) 以動態水分吸附法探討熱處理材吸脫濕之遲滯性質。臺灣大學森林環境暨資源學研究所學位論文。95頁。 中華民國行政院農業委員會林務局 (2008) 統計資料─臺灣地區一般造林面積及數量。http://subject.forest.gov.tw/web/publication/statistic/sts-02.htm。引用日期:2019年9月18日。 中華民國國家標準(CNS 6715) (2013) 木材吸濕性試驗法。經濟部標準檢驗局。 有馬孝禮 (1979) 木材中の水分離脱による熱容量変化. 木材学会誌 25: 327-331. Alén, R., E. Kouppala and P. Oesch (1996) Formation of the main degradation compound groups from wood and its components during pyrolysis. Journal of Analytical and Applied Pyrolysis 36: l37-148. Altgen, M., T. Hofmann and H. Militz (2016) Wood moisture content during the thermal modification process affects the improvement in hygroscopicity of Scots pine sapwood. Wood Science and Technology 50: 1181-1195. Anderson, R. B. (1946) Modifications of the Brunauer, Emmett and Teller equation1. Journal of the American Chemical Society 68: 686-691. Anderson, R. B. and W. K. Hall (1948) Modifications of the Brunauer, Emmett and Teller Equation II. Journal of the American Chemical Society 70: 1727-1734. Babbitt, J. D. (1942) On the adsorption of water vapour by cellulose. Canadian Journal of Research 20: 143-172. Bak, M. and R. Németh (2012) Changes in swelling properties moisture uprade rate of oil-heat-treated poplar(populus Euramericana cv. Pannonia) wood. Bioresources 7: 5128-5137. Barkas, W. W. (1937) Wood-water relationships, Part III: Molecular sorption of water by Sitka spruce wood. Proceedings of the Physical Society 49: 237-242 Bekhta, P. and P. Niemz (2003) Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung 57: 539-546. Bhuiyan, T. and N. Hirai (2005) Study of crystalline behaviour of heat-treated wood cellulose during treatments in water. Journal of Wood Science 51: 42-47. Blahovec, J. (2004) Sorption isotherms in materials of biological origin mathematical and physical approach. Journal of Food Engineering 65: 489-495. Boonstra, M. J. and B. Tjeerdsma (2006) Chemical analysis of heat treated softwoods. Holz Roh Werkst. 64: 204-211. Bourgois, J., M. Bartholin and R. Guyonnet (1989) Thermal treatment of wood: Analysis of the obtained product. Wood Science and Technology 23: 303-310. Bourgois, J. and R. Guyonnet (1988) Characterisation and analysis of torrefied wood. Wood Science and Technology 22: 143-155. Bratasz, Ł., A. Kozłowska and R. Kozłowski (2012) Analysis of water adsorption by wood using the Guggenheim-Anderson-de Boer equation. European Journal of Wood and Wood Products 70: 445-451. Bridgwater, A. V. (2004) Biomass fast pyrolysis. Thermal science 8: 21-49. Brunauer, S., P. H. Emmett and E. Teller (1938) Adsorption of gases in multimolecular layers. Journal of the American Chemical Society 60: 309-319. Brunauer, S., J. Skalny and E. E. Bodor (1969) Adsorption on nonporous solids. Journal of Colloid and Interface Science 30: 546-552. CEN/TS 15679 (2007) Thermal modified timber – definitions and characteristics. Chaouch, M., M. Pétrissans, A. Pétrissans and P. Gérardin (2010) Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species. Polymer Degradation and Stability 95: 2255-2259. Chatterjee, S. G., B. V. Ramarao and C. Tien (1997) Water-vapour sorption equilibria of a bleached-kraft paperboard-a study of the hysteresis region. Journal of Pulp and Paper Science 23: 366-373. Chen, C. M. and F. F. Wangaard (1968) Wettability and the hysteresis effect in the sorption of water vapor by wood. Wood Science and Technology 2: 177-187. Chen, Y., Y. Fan, J. Gao and H. Li (2010) Coloring characteristics of in situ lignin during heat treatment. Wood Science and Technology 46: 33-40. Cooper, D. N. E. and D. K. Ashpole (1959) The heats of sorption of cellulosic fibres deduced form calorimetric measurements. Journal of the Textile Institute Transactions 50: T223-232. De Boer, J. H. (1953) The Dynamical Character of Adsorption. Clarendon Press. 239pp. Engelund, E. T. (2011) Wood-water interactions: Linking molecular level mechanisms with macroscopic performance. Technical University of Denmark. 79pp. Epmeier, H., C. Bengtsson and M. Westin (2001) Effect of acetylation and heat treatment on dimensional stability and MOE of spruce timber. In Proceedings for the first conference of the European Society For Wood Mechanics, p.19-21. Esteves, B., A. Velez Marques, I. Domingos and H. Pereira (2007) Influence of steam heating on the properties of pine(Pinus pinaster) and eucalypt(Eucalyptus globulus) wood. Wood Science and Technology 41: 193-207. Esteves, B., A. V. Marques, I. Domingos and H. Pereira (2008a) Heat-induced colour changes of pine(Pinus pinaster) and eucalypt(Eucalyptus globulus) wood. Wood Science and Technology 42: 369-384. Esteves, B., J. Graça and H. Pereira (2008b) Extractive composition and summative chemical analysis of thermally treated eucalypt wood. Holzforschung 62: 344-351. Esteves, B. M. and H. M. Pereira (2009) Wood modification by heat treatment: review. Bioresources 4: 370-404. Fengel, D. and G.Wegner (1984) Wood: Chemistry, Ultrastructure, Reactions. Walter de Gruyter. 613pp. González-Peña, M., M. Breese and C. A. S. Hill (2004) Hygroscopicity in Heat-Treated Wood: Effect of extractives. In: International Conference on Environmentally Compatible Forest Products, p.105-119. Goring, D. G. (1978) Tsunamis-the propagation of long waves onto a shelf. California Institute of Technology. 337pp. Guggenheim, E. A. (1966) Applications of statistical mechanics. Clarendon Press. 211pp. Hailwood, A. J. and S. Horrobin (1946) Absorption of water by polymers: analysis in terms of a simple model. Transactions of the Faraday Society 42B: 84-92. Hearle, J. W. S. and R. H. Peters (1960) Moisture in textiles. Textile Institute. 203pp. Hill, C. A. S. (2006) Wood Modification-Chemical, Thermal and other Processes. John Wiley and Sons. 260pp. Hill, C. A. S. (2011) Wood modification: an update. BioResources 6: 918-919. Hill, C. A. S., A. Norton and G. Newman (2009) The water vapor sorption behavior of natural fibers. Journal of Applied Polymer Science 112: 1524-1537. Hill, C. A. S., A. J. Norton and G. Newman (2010) The water vapour sorption properties of Sitka spruce determined using a dynamic vapour sorption apparatus. Wood Science and Technology 44: 497-514. Hill, C. A. S., J. Ramsay, B. Keating, K. Laine, L. Rautkari, M. Hughes and B. Constant (2012) The water vapour sorption properties of thermally modified and densified wood. Journal of Materials Science 47: 3191-3197. Jalaludin, Z., C. A. S. Hill, H. W. Samsi, H. Husain and Y. Xie (2010) Analysis of water vapour sorption of oleo-thermal modified wood of Acacia mangium and Endospermum malaccense by a parallel exponential kinetics model and according to the Hailwood-Horrobin model. Holzforschung 64: 763-770. Jämsä, S., and P. Viitaniemi (2001) Heat treatment of wood-Better durability without chemicals. In: Proceedings of special seminar held in Antibes, France. Johansson, D. and T. Moŕen (2006) The potential of colour measurement for strength prediction of thermally treated wood. Holz Roh Werkst 64: 104-110. Kabeya, H. (1993) Effect of grinding on bound water in cellulosic materials. Mokuzai Gakkaishi 39: 1291-1297. Kachrimanis, K., M. F. Noisternig, U. J. Griesser and S. Malamataris (2006) Dynamic moisture sorption and desorption of standard and silicified microcrystalline cellulose. European Journal of Pharmaceutics and Biopharmaceutics 64: 307-315. Kadita, H. and J. Mukudai (1970) Studies on the wettability of wood. V. The heat of wetting of wood in water (1). Scientific Reports of the Kyoto Prefectural University Agriculture 22: 76-80. Kai, Y. (1991) Chemistry of extractives. Wood and cellulosic chemistry p.215-255. Kamdem, D., A. Pizzi and A. Jermannaud (2002) Durability of heat-treated wood. Holz Roh Werkst 60: 1-6. Kariz, M., M. K. Kuzman and M. Sernek (2013) Screw withdrawal and heat. Bioresources 8: 4340-4348. Kelsey, K. E. and L. N. Clarke (1956) The heat of sorption of water by wood. Australian Journal of Applied Science 7: 160-175. Kocaefe, D., S. Poncsak, J. Tang and M. Bouazara (2009) Effect of heat treatment on the mechanical properties of North American jack pine: thermogravimetric study. Journal of Materials Science 45: 681-687. Kohler, R., R. Dück, B. Ausperger and R. Alex (2003) A numeric model for the kinetics of water vapor sorption on cellulosic reinforcement fibers. Composite Interfaces 10: 255-276. Kymäläinen, M., S. B. Mlouka, T. Belt, V. Merk, V. Liljeström, T. Hänninen, T. Uimonen, M. Kostiainen and L. Rautkari (2018) Chemical, water vapour sorption and ultrastructural analysis of Scots pine wood thermally modified in high-pressure reactor under saturated steam. Journal of Materials Science 53: 3027-3037. Langmuir, I. (1918) The adsorption of gases on plane surfaces of glass, mica and platinum. Journal of the American Chemical Society 40: 1361-1403. Mazela, B., R. Zakrzewski, W. Grzeskowiak, G. Cofta and M. Bartkowiak (2003) Preliminary research on the biological resistance of thermaly modified wood.In:Abstracts of the First European Conference on Wood Modification, p.113-119. Malmquist, L. (1958) Sorption as deformation of space. Kyltekn Tidskr 4: 1-11. McDonald, A., M. Fernandez and B. Kreber (1997) Chemical and UV-VIS spectroscopic study on kiln brown stain formation in Radiata pine. In: 9th International Symposium of Wood and Pulping Chemistry, Montreal, Canada 70: 1-5. McMahon, G. (2008) Analytical instrumentation: a guide to laboratory, portable and miniaturized instruments. John Wiley and Sons. 296pp. Militz, H. (2002) Heat treatment of wood: European processes and their background. In: International Research Group Wood Pre, Section 4-Processes. Mitsui, K., A. Murata, M. Kohara and S. Tsuchikawa (2003) Colour modification of wood by light-irradiation and heat treatment. In: Abstracts of the First European Conference on Wood Modification, Belgium. Mitsui, K., A. Murata and L. Tolvaj (2004) Changes in the properties of light-irradiated wood with heat treatment: Part 3. Monitoring by DRIFT spectroscopy. Holz Roh Werkst 62: 164-168. Mitsui, K., H. Takada, M. Sugiyama and R. Hasegawa (2001) Changes in the properties of light-irradiated wood with heat treatment: part 1 Effect of treatment conditions on the change in colour. Holzforschung 55: 601-605. Mohan, D., C. U. Pittman and P. H. Steele (2006) Pyrolysis of wood/biomass for bio-oil: a critical review. Energy and Fuels 20: 848-889. Morton, W. E. and J. W. S. Hearle (2008) Physical properties of textile fibers. The Textile Institute. 746pp. Nakamura, K., T. Hatakeyama and H. Hatakeyama (1981) Studies on bound water of cellulose by differential scanning calorimetry. Textile Research Journal 51: 607-613. Nelson, R. A. (1977) The determination of moisture transitions in cellulosic materials using differential scanning calorimetry. Journal of Applied Polymer Science 21: 645-654. Nuopponen, M., T. Vuorinen, S. Jamsä and P. Viitaniemi (2004) Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies. Journal of Wood Chemistry and Technology 24: 13-26. Okubayashi, S., U. J. Griesser and T. Bechtold (2004) A kinetic study of moisture sorption and desorption on lyocell fibers. Carbohydrate Polymers 58: 293-299. Okubayashi, S., U. J. Griesser and T. Bechtold (2005a) Water accessibilities of man-made cellulosic fibers–effects of fiber characteristics. Cellulose 12: 403-410. Okubayashi, S., U. J. Griesser and T. Bechtold (2005b) Moisture sorption/desorption behavior of various manmade cellulosic fibers. Journal of Applied Polymer Science 97: 1621-1625. Patzelt, M., G. Emsenhuber and R. Stingl (2003) Color measurement as means of quality control of thermally treated wood. In: Abstracts of the First European Conference on Wood Modification, p.213-218. Pétrissans, M., G. Philippe, I. El Bakali and M. Serraj (2003) Wettability of heat-treated Wood. Holzforschung 57: 301-307. Potutkin, G. and L. Shirayena (1975) Changes in chemical components of wood during high temperature drying. Izvestiya Vysshikh Uchebnykh Zavedenii 18: 127-129. Repellin, V. and R. Guyonnet (2005) Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition. Holzforschung 59: 28-34. Rouquerol, F., J. Rouquerol and K. Sing (1999) Adsorption by powders and solids: principles, methodology, and applications. Academic Press 54: 15893-15899. Rowell, R. M. (1984) The chemistry of solid wood. American Chemical Society. 614pp. Rowell, R. M. (2012) Handbook of wood chemistry and wood composites. CRC press. 487pp. Sehlstedt-Persson, M. (2003) Colour responses to heat treatment of extractives and sap from pine and spruce,”In International IUFRO Wood Drying Conference, p.459-464. Sheppard, S. E. (1933) The structure of xerogels of cellulose and derivatives. Transactions of the Faraday Society 29: 77-85. Siau, J. F. (1995) Wood: Influence of moisture on physical properties. Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University. 227pp. Simpson, L. A. and A. F. M. Barton (1991) Determination of the fibre saturation point in whole wood using differential scanning calorimetry. Wood Science and Technology 25: 301-308. Sivonen, H., S. Maunu, F. Sundholm, S. Jämsä and P. Viitaniemi (2002) Magnetic resonance studies of thermally modified wood. Holzforschung 56: 648-654. Skaar, C. (1972) Water in wood. Syracuse university. 218pp. Skaar, C. (1988). Wood-water relations. Springer-Verlag. 283pp. Stamm, A. J. and W. K. Loughborough (1935) Thermodynamics of the Sweeling of Wood. The Journal of Physical Chemistry 39: 121-132. Stamm, A. and L. Hansen (1937) Minimizing wood shrinkage and swelling: Effect of heating in various gases. Industrial and Engineering Chemistry 29: 831-833. Stamm, A. J. and L. A. Hansen (1938) Surface-bound versus capillary-condensed water in wood. The Journal of Physical Chemistry 42: 209-214 Stamm, A. J. (1950) Bound water and hydration. Tappi. 33: 435-439 Stamm, A. J. (1964) Wood and cellulose science. Wood and Cellulose Science. 549pp. Stone, J. E. and A. M. Scallan (1968) The effect of component removal upon the porous structure of the cell wall of wood. Part III. A comparison between the sulphite and kraft processes. Pulp and Paper Magazine of Canada p.69-74. Spalt, H. A. (1958) Water vapor sorption by wood. Forest Product Journal 8: 288-295. Sundqvist, B. (2004) Colour changes and acid formation in wood during heating. Lulea University of Technology. 154pp. Sundqvist, B. and T. Morén (2002) The influence of wood polymers and extractives on wood colour induced by hydrothermal treatment. Holz Roh Werkst 60: 375-376. ThermoWood Asscoiation (2003) Finnish ThermoWood Handbook. 66pp. Tiemann, H. (1920) Effect of different methods of drying on the strength and hygroscopicity of wood. The kiln drying of lumber p.256-264. Timmermann, E. O. (2003) Multilayer sorption parameters: BET or GAB values?. Colloids and Surfaces A: Physicochemical and Engineering Aspects 220: 235-260. Tjeerdsma, B. F., M. Boonstra, A. Pizzi, P. Tekely and H. Militz (1998a) Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz Roh Werkst 56: 149-153. Tjeerdsma, B. F., M. Boonstra and H. Militz (1998b) Thermal modification of nondurable wood species. Part 2. Improved wood properties of thermally treated wood. In: International Research Group on Wood Pre., Document no. IRG/WP 9840124. Tjeerdsma, B. F. and H. Militz (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz als Roh- und Werkstoff 63: 102-111. Tsuchikawa, S. and S. Tsutsumi (1998) Adsorptive and capillary condensed water in biological material. Journal of Materials Science Letters 17: 661-663. Van den Berg, C. and S. Bruin (1981) Water activity: influence on food quality. Academic Press. 61pp. Van den Berg, C. (1984) Description of water activity of foods for engineering purposes by means of the GAB model of sorption. Engineering Science in the Food Industry p.311-321. Venkateswaran, A. (1970) Sorption of aqueous and nonaqueous media by wood and cellulose. Chemical Reviews 70: 619-637. Viitaniemi, P., S. Jämsä and H. Viitanen (1997) Method for improving biodegradation resistance and dimensional stability of cellulosic products. United States Patent No. 5678324 (US005678324). Volbehr, B. (1896) Untersuchungen über die quellung der holzfaser. Druck von Schmidt and Klaunig. 37pp. Vrentas, J. S. and C. M. Vrentas (1996) Hysteresis effects for sorption in glassy polymers. Macromolecules 29: 4391-4396. Weatherall, I. L. and B. D. Coombs (1992) Skin color measurements in terms of CIELAB color space values. Journal of Investigative Dermatology 99: 468-473. Weichert, L. (1963) Untersuchungen über das Sorptions- und Quellungsverhalten von Holz verschiedener Rohdichte in Abhängigkeit vom Feuchtigkeitsgehalt. Holz Roh Werkst 21: 290-300. Weiland, J. and R. Guyonnet (2003) Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz Roh Werkst 61: 216-220. Wikberg, H. and S. Maunu (2004) Characterisation of thermally modified hard- and softwoods by 13C CPMAS NMR. Carbohydrate Polymers 58: 461-466. Williams, P. T. and S. Besler (1996) The influence of temperature and heating rate on the slow pyrolysis of biomass. Renewable Energy 7: 233-225. Windeisen, E. and G. Wegener (2008) Behaviour of lignin during thermal treatments of wood. Industrial Crops and Products 27: 57-62. Wood Handbook (1955) Wood Handbook. USDA Forest Service Forest Products Laboratory. 528 pp. Xie, Y., C. A. S. Hill, Z. Xiao, C. Mai and H. Militz (2011a) Dynamic water vapour sorption properties of wood treated with glutaraldehyde. Wood Science and Technology 45: 49-61. Xie, Y., C. A. S. Hill, Z. Jalaludin and D. Sun (2011b) The water vapour sorption behaviour of three celluloses: analysis using parallel exponential kinetics an interpretation using the Kelvin-Voigt viscoelastic model. Cellulose 18: 517-530. Xie, Y., C. A. S. Hill, Z. Jalaludin, S. F. Curling, R. D. Anandjiwala, A. J. Norton and G. Newman (2011c) The dynamic water vapour sorption behaviour of natural fibres and kinetic analysis using the parallel exponential kinetics model. Journal of Materials Science 46: 479-489. Yamauchi, S., Y. Iijima and S. Doi (2005) Spectrochemical characterization by FT-Raman spectroscopy of wood heat-treated at low temperatures: Japanese larch and beech. Journal of Wood Science 51: 498-506. Yildiz, S., D. Gezer and U. Yildiz (2006) Mechanical and chemical behavior of spruce wood modified by heat. Building Environ. 41: 1762-1766. Zaman, A., R. Alen and R. Kotilainen (2000) Heat behavior of Pinus sylvestris and Betula pendula at 200-230ºC. Wood and Fiber Science 32: 138-143. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74815 | - |
dc.description.abstract | 本研究以相思木(Acacia confusa)心材木粉為材料,4組樣本分別為未處理樣本及經170°C、190°C、210°C熱處理1 hr之樣本,其中所得樣本之重量損失分別為1.91%、7.96%、16.92%。另以色差計測量,探討樣本熱處理後L*(明暗值)、a*(紅綠值)、b*(黃藍值)及∆E(色差值)數值之變化,顏色量測結果L*、a*、b*皆隨熱處理溫度增加而下降,而∆E隨熱處理溫度增加而增加,顯示樣本受熱處理
後,顏色變暗、偏綠、偏藍,以及色差度增加。 熱重分析(Thermogravimetric analysis, TGA)可知,未處理及170°C、190°C熱處理樣本分別在250°C及310°C產生兩階段熱裂解,未處理及170°C、190°C樣本重量保留率分別為24.84%、27.96%、28.18%。而210°C樣本僅在300°C有一階段熱裂解,重量保留率為72.03%。而700°C時之焦炭率(char content)分別為15.11%、12.30%、10.72%、44.63%。 利用動態水分吸附設備(Dynamic vapour sorption apparatus, DVS)測得樣本之吸脫濕動態曲線,得到未處理及170°C、190°C、210°C樣本之吸脫濕等溫曲線在95%RH時,EMC分別為19.57%、17.76%、14.82%、11.89%。並以HH (Hailwood- Horrobin)模型、GAB (Guggenheim-Anderson-de Boer)模型及PEK (parallel exponential kinetics)模型來擬合木材之吸脫濕等溫曲線,探討木材吸脫濕性質、等溫曲線趨勢與遲滯現象之變化,結果顯示3種模型都提供優良之擬合結果,其中,HH模型於未處理及170°C、190°C、210°C樣本所求得之單層水含水率,分別為3.5%、2.9%、2.4%、3.1%;GAB模型Vm值得到與HH模型1800/W參數相同之趨勢,顯示脫濕程序之單層水總容量值大於吸濕程序;PEK與HH模型之單/多層水曲線比較後,結果顯示快速與慢速曲線與單/多層水無明確相關性。 最後,利用示差掃描量熱儀(Differential scanning calorimetry, DSC)測得未處理及170°C、190°C、210°C樣本之FSP分別為25.0%、22.3%、19.1%、14.0%MC,與HH模型之p-FSP之結果相近。由DSC得4組樣本之積分濕潤熱,再經計算得未處理及170°C、190°C、210°C樣本之初始微分濕潤熱(QL)'0分別為298.35 cal/g、361.22 cal/g、336.75 cal/g、340.81 cal/g;而微分濕潤熱曲線分別為 (QL')_ctrl = 298.35 exp(-9.86 m)、 (QL')_170°C = 361.22 exp(-11.63 m)、 (QL')_190°C = 336.75 exp(-12.30 m)、 (QL')_210°C = 340.81 exp(-16.65 m)。 | zh_TW |
dc.description.abstract | In this study, Acacia confusa heartwood powder was used as the raw material. The four groups of samples were untreated samples and heat treated at 170°C, 190°C and 210°C for 1 hr. The weight loss of the samples at 170°C, 190°C and 210°C after heat treatment was 1.91%, 7.96% and 16.92%, respectively. The color meter is used to measure the change of L*, a*, b* and ∆E after heat treatment of the samples. L*, a*, and b* all decrease as the heat treatment temperature increases, and ∆E increases as the heat treatment temperature increases, indicating that after the sample is subjected to heat treatment, the color becomes dark, greenish, bluish, and the color difference increases.
Thermogravimetric analysis (TGA) showed that the untreated and 170°C, 190°C samples produced pyrolysis at 250°C and 310°C, respectively. The weight retention rates of the untreated and 170°C, 190°C samples were 24.84%, 27.96% and 28.18%, respectively. The 210°C sample only had a stage thermal cracking at 300°C, and the weight retention rate was 72.03%. The char content at 700 °C of the untreated and 170°C, 190°C and 210°C samples were 15.11%, 12.30%, 10.72% and 44.63%, respectively. The absorption and desorption dynamic curves of the samples were measured using a dynamic vapour sorption apparatus (DVS). The equilibrium moisture content (EMC) of the untreated and 170°C, 190°C and 210°C samples at 95%RH were 19.57%, 17.76%, 14.82% and 11.89%, respectively. The HH (Hailwood-Horrobin) model, GAB (Guggenheim-Anderson-de Boer) model and PEK (parallel exponential kinetics) model are used to fit the sorption isotherm curves of the samples to figure out the effects of sorption properties, isothermal curve trend and hysteresis in samples. The results show that all three models provide excellent fitting results. The moisture content (MC) of single layer water of HH model in the untreated, 170°C, 190°C, and 210°C samples were 3.5%, 2.9%, 2.4% and 3.1%, respectively. The Vm value of GAB model has the same trend as the 1800/W parameter of HH model, indicating that the total volume of the single layer water of the desorption is greater than the adsorption. After comparing the single/multilayer water curves of PEK and HH models, the results show that there is no clear correlation between fast and slow curves and single/multilayer water. Finally, the fiber saturation points (FSP) of the untreated, 170°C, 190°C and 210°C samples were determined to be 25.0%, 22.3%, 19.1% and 14.0%MC, respectively, using differential scanning calorimetry (DSC), which are similar to the p-FSP of HH model. The integral heat of sorption of the four samples was obtained by DSC, and the initial differential heat of sorption (QL)'0 of the untreated, 170°C, 190°C and 210°C samples were calculated to be 298.35, 361.22, 336.75 and 340.81 cal/g, and the differential heat of sorption curves are (QL')_ctrl = 298.35 exp(-9.86 m), (QL')_170°C = 361.22 exp(-11.63 m), (QL')_190°C = 336.75 exp(-12.30 m) and (QL')_210°C = 340.81 exp(-16.65 m), respectively. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T09:08:06Z (GMT). No. of bitstreams: 1 ntu-108-R05625038-1.pdf: 8853260 bytes, checksum: 4777e1dda76ff65c5f758013ce7a9ad6 (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 口試委員會審定書..........................................i
誌謝...................................................ii 中文摘要...............................................iii Abstract................................................v 目錄..................................................vii 圖目錄..................................................x 表目錄.................................................xx 第一章 前言.............................................1 第二章 文獻回顧.........................................3 2.1 相思樹...........................................3 2.1.1 相思樹基本資料................................3 2.1.2 相思樹木材性質與用途...........................4 2.2 木材熱處理......................................5 2.2.1 熱處理介紹....................................5 2.2.2 木材熱處理之變化...............................6 2.3 木材吸脫濕現象...................................13 2.3.1 木材吸濕性...................................13 2.3.2 木材吸脫濕等溫曲線............................13 2.3.3 木材遲滯現象.................................14 2.3.4 一般傳統方法.................................16 2.3.5 動態水分吸附法...............................17 2.4 模型分析.........................................25 2.4.1 Hailwood-Horrobin(HH)模型...................27 2.4.2 Guggengeim-Anderson-de Boer(GAB)模型........32 2.4.3 Parallel Exponential Kinetic(PEK)模型.......39 2.5 木材吸脫濕熱力學..................................41 2.5.1 示差掃描量熱儀...............................41 2.5.2 木材中的水分.................................43 2.5.3 木材水分與普通水之能量比較.....................46 2.5.4 微分濕潤熱...................................48 第三章 材料與方法.......................................55 3.1 試驗材料基本性質及前處理...........................55 3.1.1 破碎前處理...................................55 3.1.2 熱處理......................................55 3.1.3 熱處理收率...................................56 3.1.4 色差值......................................56 3.2 熱重分析.........................................57 3.3 動態水分蒸氣吸附儀..............................57 3.4 示差掃描量熱儀.................................58 3.5 實驗流程圖.....................................59 第四章 結果與討論.......................................61 4.1 熱處理之收率.....................................61 4.2 熱處理色差值.....................................61 4.3 熱重分析.........................................63 4.4 動態水分吸附法特性分析............................64 4.5 動態水分吸附數值分析─HH模型........................75 4.6 動態水分吸附數值分析─GAB模型.......................78 4.7 動態水分吸附數值分析─PEK模型.......................81 4.8 示差掃描量熱儀分析─微分濕潤熱......................94 第五章 結論............................................98 參考文獻...............................................100 附錄..................................................112 | |
dc.language.iso | zh-TW | |
dc.title | 相思樹熱處理材之吸脫濕性質探討 | zh_TW |
dc.title | Study on Hygroscopic Properties of Heat-treated Acacia confusa Wood | en |
dc.type | Thesis | |
dc.date.schoolyear | 108-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 李文昭(Wen-Jau Lee),羅盛峰(Sheng-Fong Lo),張豐丞(Feng-Cheng Chang) | |
dc.subject.keyword | 熱處理,色差,熱重分析,動態水分吸附法,Hailwood- Horrobin模型,Guggenheim-Anderson-de Boer模型,Parallel exponential kinetics模型,示差掃描量熱法,纖維飽和點,微分濕潤熱, | zh_TW |
dc.subject.keyword | Heat Treatment,Color Difference,Thermogravimetric Analysis,Dynamic Vapour Sorption,Hailwood-Horrobin Model,Guggenheim-Anderson-de Boer Model,Parallel Exponential Kinetics Model,Differential Scanning Calorimetry,Fiber Saturation Point,Differential Heat of Sorption, | en |
dc.relation.page | 122 | |
dc.identifier.doi | 10.6342/NTU201904304 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2019-11-22 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 森林環境暨資源學研究所 | zh_TW |
顯示於系所單位: | 森林環境暨資源學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 8.65 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。