請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74804
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃定洧 | |
dc.contributor.author | Keng-Wei Fan | en |
dc.contributor.author | 范耿維 | zh_TW |
dc.date.accessioned | 2021-06-17T09:07:53Z | - |
dc.date.available | 2024-12-02 | |
dc.date.copyright | 2019-12-02 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-11-26 | |
dc.identifier.citation | [1] Q. Cheng, M. Bahadori, M. Glick, et al., “Recent advances in optical technologies for data centers: a review,” Optica 5, 1354-1370 (2018).
[2] S. E. Miller, “Integrated optics: An introduction,” The Bell System Technical Journal 48, 2059-2069 (1969). [3] G. T. Reed, “Device physics: the optical age of silicon,” Nature 427, 595 (2004). [4] M. Lipson, “Guiding, modulating, and emitting light on silicon-challenges and opportunities,” Journal of Lightwave Technology 23, 4222 (2005). [5] D. Dai, J. Bauters, and J. E. Bowers, “Passive technologies for future large-scale photonic integrated circuits on silicon: polarization handling, light non-reciprocity and loss reduction,” Light: Science & Applications 1, e1 (2012). [6] R. Soref, “The past, present, and future of silicon photonics,” IEEE Journal of selected topics in quantum electronics 12, 1678-1687 (2006). [7] Y. G. Boucher, “Analytical model for the coupling constant of a directional coupler in terms of slab waveguides,” Optical Engineering 53, 071810 (2014). [8] P. H. Fu, Y. C. Tu, and D. W. Huang, “Broadband optical waveguide couplers with arbitrary coupling ratios designed using a genetic algorithm,” Optics Express 24, 30547-30561 (2016). [9] G. F. Chen, J. R. Ong, T. Y. Ang, et al., “Broadband silicon-on-insulator directional couplers using a combination of straight and curved waveguide sections,” Scientific reports 7, 7246 (2017). [10] A. Liu, R. Jones, L. Liao, et al., “A high-speed silicon optical modulator based on a metal–oxide–semiconductor capacitor,” Nature 427, 615 (2004). [11] S. Wu and J. Xiao, “Compact polarization rotator for silicon-based cross-slot waveguides using subwavelength gratings,” Applied Optics 56, 4892-4899 (2017). [12] J. Wang, J. Xiao, and X. Sun, “Design of a broadband polarization rotator for silicon-based cross-slot waveguides,” Applied Optics 54, 3805-3810 (2015). [13] A. Xie, L. Zhou, J. Chen, et al., “Efficient silicon polarization rotator based on mode-hybridization in a double-stair waveguide,” Optics Express 23, 3960-3970 (2015). [14] C. W. Hsu, H. Y. Lin, J. Y. Chen, et al., “Ultracompact polarization rotator in an asymmetric single dielectric loaded rib waveguide,” Applied Optics 55, 1395-1400 (2016). [15] Z. Wang and D. Dai, “Ultrasmall Si-nanowire-based polarization rotator,” JOSA B 25, 747-753 (2008). [16] B. Bai, Q. Deng, and Z. Zhou, “Plasmonic-assisted polarization beam splitter based on bent directional coupling,” IEEE Photonics Technology Letters 29, 599-602 (2017). [17] D. Chen, X. Xiao, L. Wang, et al., “Broadband, fabrication-tolerant polarization beam splitters based on a tapered directional coupler,” IEEE Photonics Technology Letters 28, 2074-2077 (2016). [18] S. Chen, H. Wu, and D. Dai, “High extinction-ratio compact polarisation beam splitter on silicon,” Electronics Letters 52, 1043-1045 (2016). [19] D. Dai and J. E. Bowers, “Novel ultra-short and ultra-broadband polarization beam splitter based on a bent directional coupler,” Optics Express 19, 18614-18620 (2011). [20] D. Dai, Z. Wang, and J. E. Bowers, “Ultrashort broadband polarization beam splitter based on an asymmetrical directional coupler,” Optics Letters 36, 2590-2592 (2011). [21] P. H. Fu, T. Y. Huang, K. W. Fan, et al., “Optimization for Ultrabroadband Polarization Beam Splitters Using a Genetic Algorithm,” IEEE Photonics Journal 11, 1-11 (2018). [22] X. Guan, H. Wu, Y. Shi, et al., “Ultracompact and broadband polarization beam splitter utilizing the evanescent coupling between a hybrid plasmonic waveguide and a silicon nanowire,” Optics Letters 38, 3005-3008 (2013). [23] C. W. Hsu, T. K. Chang, J. Y. Chen, et al., “8.13 μm in length and CMOS compatible polarization beam splitter based on an asymmetrical directional coupler,” Applied Optics 55, 3313-3318 (2016). [24] D. W. Kim, M. H. Lee, Y. Kim, et al., “Planar-type polarization beam splitter based on a bridged silicon waveguide coupler,” Optics Express 23, 998-1004 (2015). [25] Y. Kim, M. H. Lee, Y. Kim, et al., “High-extinction-ratio directional-coupler-type polarization beam splitter with a bridged silicon wire waveguide,” Optics Letters 43, 3241-3244 (2018). [26] L. Liu, Q. Deng, and Z. Zhou, “Manipulation of beat length and wavelength dependence of a polarization beam splitter using a subwavelength grating,” Optics Letters 41, 5126-5129 (2016). [27] Z. Lu, Y. Wang, F. Zhang, et al., “Wideband silicon photonic polarization beamsplitter based on point-symmetric cascaded broadband couplers,” Optics Express 23, 29413-29422 (2015). [28] J. R. Ong, T. Y. Ang, E. Sahin, et al., “Broadband silicon polarization beam splitter with a high extinction ratio using a triple-bent-waveguide directional coupler,” Optics Letters 42, 4450-4453 (2017). [29] Y. Tian, J. Qiu, C. Liu, et al., “Compact polarization beam splitter with a high extinction ratio over S+C+L band,” Optics Express 27, 999-1009 (2019). [30] J. Wang, J. Xiao, and X. Sun, “Design of a compact polarization splitter composed of a multiple-slotted waveguide and a silicon nanowire,” Journal of Optics 15, 035501 (2013). [31] H. Wu and D. Dai, “High-performance polarizing beam splitters based on cascaded bent directional couplers,” IEEE Photonics Technology Letters 29, 474-477 (2017). [32] H. Wu, Y. Tan, and D. Dai, “Ultra-broadband high-performance polarizing beam splitter on silicon,” Optics Express 25, 6069-6075 (2017). [33] Z. Ying, G. Wang, X. Zhang, et al., “Ultracompact and broadband polarization beam splitter based on polarization-dependent critical guiding condition,” Optics Letters 40, 2134-2137 (2015). [34] F. Zhang, H. Yun, Y. Wang, et al., “Compact broadband polarization beam splitter using a symmetric directional coupler with sinusoidal bends,” Optics Letters 42, 235-238 (2017). [35] Y. Li, H. Yu, T. Dai, et al., “Graphene-based floating-gate nonvolatile optical switch,” IEEE Photonics Technology Letters 28, 284-287 (2015). [36] T. Barwicz, M. R. Watts, M. A. Popović, et al., “Polarization-transparent microphotonic devices in the strong confinement limit,” Nature Photonics 1, 57 (2007). [37] E. A. El-Fiky, A. Samani, D. Patel, et al., 'A high extinction ratio, broadband, and compact polarization beam splitter enabled by cascaded MMIs on silicon-on-insulator,' in Optical Fiber Communication Conference, 2016, W2A. 8, Optical Society of America. [38] W. Yang, Y. Li, X. Wang, et al., 'An ultracompact silicon polarization beam splitter based on mode conversion in multimode waveguide,' in Optical Fiber Communication Conference, 2014, Th2A. 16, Optical Society of America. [39] M. Yin, Y. Huang, H. Yi, et al., 'A Compact Polarization Beam Splitter based on Silicon-on-Insulator,' in Asia Communications and Photonics Conference, 2013, AF2B. 9, Optical Society of America. [40] L. Augustin, R. Hanfoug, J. Van der Tol, et al., “A compact integrated polarization splitter/converter in InGaAsP–InP,” IEEE Photonics Technology Letters 19, 1286-1288 (2007). [41] T. Liang and H. Tsang, “Integrated polarization beam splitter in high index contrast silicon-on-insulator waveguides,” IEEE Photonics Technology Letters 17, 393-395 (2005). [42] I. Kiyat, A. Aydinli, and N. Dagli, “A compact silicon-on-insulator polarization splitter,” IEEE Photonics Technology Letters 17, 100-102 (2004). [43] Y. F. Ma, M. J. Sung, and D. W. Huang, “Controlling the polarization dependence of dual-channel directional couplers formed by silicon-on-insulator slot waveguides,” Applied Optics 49, 6979-6985 (2010). [44] N. C. Cheng, Y. F. Ma, P. H. Fu, et al., “Horizontal slot waveguides for polarization branching control,” Applied Optics 54, 436-443 (2015). [45] H. Fukuda, K. Yamada, T. Tsuchizawa, et al., “Ultrasmall polarization splitter based on silicon wire waveguides,” Optics Express 14, 12401-12408 (2006). [46] A. Yariv, “Coupled-mode theory for guided-wave optics,” IEEE Journal of Quantum Electronics 9, 919-933 (1973). [47] K. Okamoto, Fundamentals of optical waveguides (Academic press, 2006). [48] Y. Murakami, “Coupling between curved dielectric waveguides,” Applied Optics 19, 398-403 (1980). [49] J. Robinson and Y. Rahmat-Samii, “Particle swarm optimization in electromagnetics,” IEEE Transactions on Antennas and Propagation 52, 397-407 (2004). [50] Lumerical Solutions, Inc. (accessed on 2019/11/15), https://kb.lumerical.com/solvers_finite_difference_eigenmode.html. [51] K. Yee, “Numerical solution of initial boundary value problems involving Maxwell's equations in isotropic media,” IEEE Transactions on Antennas and Propagation 14, 302-307 (1966). [52] W. Huang and C. Xu, “Simulation of three-dimensional optical waveguides by a full-vector beam propagation method,” IEEE Journal of Quantum Electronics 29, 2639-2649 (1993). [53] IMEC, Photonic Integrated Circuits (accessed on 2019/11/15), https://www.imec-int.com/en/what-we-offer/ic-link/photonic-integrated-circuits. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74804 | - |
dc.description.abstract | 近年來隨著資料傳輸量需求的增加,用積體光路取代傳統電路來傳輸資料已成為新的趨勢,在積體光路中因為 SOI 光波導相容於現有成熟的 CMOS 製程技術而被廣泛使用,然而次微米等級的 SOI 光波導本身存在相當嚴重的極化相依問題,解決此問題較通用的做法為使用極化分集系統,而極化分離器為其中不可或缺的元件之一,為了同時滿足低製造成本與涵蓋寬頻帶,小尺寸寬頻極化分離器的設計成為一個關鍵的命題。彎曲定向耦合器因為其結構簡單且能有效讓兩種極化相位匹配條件顯著的不同,因此適合用來設計極化分離器,本論文將彎曲定向耦合器細分成若干小段,利用自訂的粒子群優化演算法優化每小段的結構參數,由於利用三維時域有限差分法進行優化相當費時,為了提高優化過程的效率,本論文使用轉移矩陣形式的彎曲波導中的耦合模態理論以及建立相關係數的查找表來快速求得元件的頻譜響應並進行元件參數的優化,優化後的元件再利用三維時域有限差分法對頻譜響應進行驗證,並且探討製程容忍度以及透過寬度漸變波導連接到單模波導之總體元件響應。
本論文針對兩種不同的頻寬標的 (100 nm 以及 200 nm) 的元件進行優化 (分別命名為元件一與元件二),兩種元件的行經角度皆為 140 度,中心的曲率半徑為 20 μm,對應元件長度為 37.588 μm,對元件一而言,優化後在 1500–1600 nm 波長範圍內 TM 與 TE 的消光比皆可高於 21 dB,插入損耗皆可低於 0.11 dB,對元件二而言,優化後在 1450–1650 nm 波長範圍內 TM 與 TE 的消光比皆可高於 15.85 dB,插入損耗皆可低於 0.19 dB。此外,本論文也探討光行進方向上的波導寬度製程誤差,在製程造成的寬度誤差正負 10 nm 之內,元件一 TM 與 TE 的消光比皆可大於 16.27 dB,元件二 TM 與 TE 的消光比皆可大於 13.47 dB。為了相容於 IMEC 的標準元件庫,因此在設計的元件輸入與輸出端加上低插入損耗的寬度漸變結構做連接,並進一步分析其總體效能。在加上寬度漸變結構後,元件一 TE 與 TM 的消光比皆可高於 20.51 dB,插入損耗皆小於 0.12 dB,元件二 TE 與 TM 的消光比皆可高於 15.45 dB,插入損耗皆小於 0.2 dB。本論文所設計的元件與其他文獻相比,在更寬的操作頻譜範圍內仍有著高消光比,且較低的插入損耗。 | zh_TW |
dc.description.abstract | With the growth of data transmission demand in recent years, the data transmission by using optical interconnects has become an emerging trend. Among them, the silicon on insulator (SOI) waveguides have been widely used owing to the compatibility with the mature CMOS manufacturing technologies. However, the submicrometer-sized SOI waveguides are inherently highly polarization-dependent. To address this issue, a general solution is to utilize a polarization diversity system, in which the polarization beam splitters (PBS) are essential components. To achieve the required device performance, especially over a broad operation bandwidth with low manufacturing cost, the design of a compact and broadband PBS becomes a crucial issue. Bent directional coupler is suitable for designing PBS owing to simple device structure and providing significant different phase match conditions for the two polarized modes effectively. In this thesis, the bent directional coupler is segmented into short sections and the geometric parameters are optimized by a customized particle swarm optimization algorithm. To enhance the computational efficiency for the optimization process without carrying out the time-consuming three-dimensional finite-difference time-domain (3D FDTD) calculations, the spectral responses of the devices can be determined by using the coupled mode theory (CMT) in the transfer matrix form for bent waveguides. The lookup tables for the CMT-related parameters are also constructed to accelerate the optimization process. The spectral responses of the optimal devices are further verified using the 3D FDTD simulations. The fabrication tolerance and the overall responses of the optimal devices connected with standard single mode waveguides using tapers are also analyzed.
In this thesis, two different targets corresponding to the operating bandwidths of 100 nm and 200 nm are chosen for the optimal devices, named Device 1 and Device 2, respectively. These two devices have bent directional coupling sections of 140-degree arc angles and 20-μm-long central radius of curvature, resulting in 37.588-μm-long device lengths. For Device 1, the extinction ratio (ER) for both TM and TE modes is higher than 21 dB, and the insertion loss (IL) for them is lower than 0.11 dB for the operating wavelength range 1500 – 1600 nm. For Device 2, the ER for both TM and TE modes is higher than 15.85 dB, and the IL for them is lower than 0.19 dB for the operating wavelength range 1450 – 1650 nm. In addition, the variation of waveguide width along the propagation direction due to fabrication error is considered in this thesis. With the fabrication error of ±10 nm, the results show that the ER for both TM and TE modes of Device 1 is higher than 16.27 dB, and the ER for both TM and TE modes of Device 2 is higher than 13.47 dB. In order to be compatible with IMEC standard library, the low-loss tapers are connected to the input and output ports of the designed devices and their overall performances are further analyzed. The result shows that the ER for both TM and TE modes of Device 1 is higher than 20.51 dB and the IL for them is lower than 0.12 dB. The ER for both TM and TE modes of Device 2 is higher than 15.45 dB and the IL for them is lower than 0.2 dB. Compared to the polarization beam splitters shown in previous literatures, the devices presented in this thesis exhibit high extinction ratio and lower insertion loss in the broader operating bandwidth. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T09:07:53Z (GMT). No. of bitstreams: 1 ntu-108-R05941095-1.pdf: 5372375 bytes, checksum: d319ce49f4241a33b04bedc2b4a196c6 (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 口試委員會審定書 i
誌謝 ii 中文摘要 iii ABSTRACT v 目錄 vii 圖目錄 ix 表目錄 xiii 第一章 緒論 1 1.1 背景介紹 1 1.2 研究動機 3 第二章 研究理論背景 5 2.1 光波導原理 5 2.1.1 平板波導 5 2.1.2 矩形波導 7 2.2 彎曲波導中的耦合模態理論 10 2.3 粒子群優化演算法 15 2.4 數值模擬方法 17 2.4.1 有限差分特徵模態求解器 17 2.4.2 三維時域有限差分法 18 第三章 文獻回顧 22 3.1 利用水平狹縫波導所設計之對稱定向極化分離器 22 3.2 利用串接的彎曲波導所設計之非對稱定向極化分離器 23 3.3 利用漸變式淺蝕刻波導所設計之非對稱定向極化分離器 25 3.4 利用基因演算法優化結構參數所設計之極化分離器 27 第四章 基於粒子群演算法設計寬頻極化分離器 29 4.1 元件結構 29 4.2 轉移矩陣形式的耦合模態理論 32 4.3 元件結構與粒子群優化演算法重要參數之設定 33 4.3.1 基本結構參數之設定 33 4.3.2 中心曲率半徑 Rc 之設定 34 4.3.3 建立查找表以及元件結構參數數量之設定 36 4.3.4 粒子群優化演算法 'u' 、c1、c2 之設定 40 4.4 利用粒子群優化演算法最佳化元件結構參數 42 4.4.1 元件一 (波長範圍 1500–1600 nm) 之最佳化設計 42 4.4.2 元件二 (波長範圍 1450–1650 nm) 之最佳化設計 45 4.5 模擬結果討論 48 4.5.1 元件一之三維時域有限差分法結果分析 49 4.5.2 元件二之三維時域有限差分法結果分析 51 4.6 製程容忍度分析 54 4.7 考量連接到單模波導之探討 57 結論 61 參考文獻 62 | |
dc.language.iso | zh-TW | |
dc.title | 利用粒子群優化演算法設計彎曲定向耦合型寬頻極化分離器 | zh_TW |
dc.title | Design of Broadband Bent Directional Coupler Based Polarization Beam Splitters Using Particle Swarm Optimization Algorithm | en |
dc.type | Thesis | |
dc.date.schoolyear | 108-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 魏培坤,張書維 | |
dc.subject.keyword | 粒子群優化演算法,彎曲定向耦合器,寬頻,極化分離器,最佳化, | zh_TW |
dc.subject.keyword | Particle Swarm Optimization Algorithm,Bent Directional Coupler,Broadband,Polarization Beam Splitter,Optimization, | en |
dc.relation.page | 68 | |
dc.identifier.doi | 10.6342/NTU201904320 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2019-11-26 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 5.25 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。