請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74708
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 劉建豪(Chien-Hao Liu) | |
dc.contributor.author | Po-Wen Lin | en |
dc.contributor.author | 林柏文 | zh_TW |
dc.date.accessioned | 2021-06-17T09:06:18Z | - |
dc.date.available | 2022-01-21 | |
dc.date.copyright | 2020-01-21 | |
dc.date.issued | 2020 | |
dc.date.submitted | 2020-01-06 | |
dc.identifier.citation | [1] W. K.Heriberto Delgado, “Passive Magnetic Radome,” US: US 7,006,052 B2, 2006.
[2] Y.Li, L.Li, S.Member, Y.Zhang, andC.Zhao, “Design and Synthesis of Multilayer Frequency Selective Surface Based on Antenna-Filter-Antenna Using Minkowski Fractal Structures,” IEEE Trans. Antennas Propagation, vol. 63, no. 1, 2015. [3] N.Liu, X.Sheng, C.Zhang, andD.Guo, “Design of Frequency Selective Surface Structure With High Angular Stability for Radome Application,” IEEE Antennas Wirel. Propag. Lett., vol. 17, no. 1, pp. 138–141, 2018. [4] M.Karahan, E.Aksoy, andY.Yavuz, “A Frequency Selective Surface Design To Reduce The Interference Effect On Satellite Communication,” in 2017 8th International Conference on Recent Advances in Space Technologies (RAST), vol. 1, pp. 221–223. [5] D.Singh, A.Kumar, S.Meena, andV.Agarwala, “Analysis of Frequency Selective Surfaces for Radar Absorbing Materials,” Prog. Electromagn. Res. B, vol. 38, pp. 297–314, 2012. [6] D.Kim, J.Yeo, andJ.Choi, “Compact Spatial Triple-band-stop Filter for Cellular / PCS/ IMT-2000 Systems,” ETRI J., vol. 30, no. 5, pp. 735–737, 2008. [7] L.Zhang, Q.Wu, andT. A.Denidni, “Electronically Radiation Pattern Steerable Antennas Using Active Frequency Selective Surfaces,” IEEE Trans. Antennas Propag., vol. 61, no. 12, pp. 6000–6007, 2013. [8] G. H. K.Po Chul Kim, Dai Gil Lee, Il Sung Seob, “Low-observable Radomes Composed of Composite Sandwich Constructions and Frequency Selective Surfac,” Compos. Sci. Technol., vol. 9, pp. 2163–2170, 2008. [9] C.Wang, M.Chen, H.Lei, K.Yao, andH.Li, “Radar Stealth and Mechanical Properties of a Broadband Radar Absorbing Structure,” Compos. Part B, vol. 123, pp. 19–27, 2017. [10] H.Zhou et al., “Filter-Antenna Consisting of Conical FSS Radome and Monopole Antenna,” IEEE Trans. Antennas Propag., vol. 60, no. 6, pp. 3040–3045, 2012. [11] M. U.Karlsson, F.Olsson, andM.Jansson, “Bofors Hpm Blackout - A Versatile and Mobile L-band High Power Microwave,” in 2009 IEEE Pulsed Power Conference, 2009, pp. 499–501. [12] T. K.Wu, Frequency selective surface and grid array. New York: Wiley-Interscience, 1995. [13] B. A.MUNK, Frequency Selective Surfaces Theory and Design. Wiley-Interscience Publication, 2000. [14] F.Sakran, Y.Neve-oz, A.Ron, M.Golosovsky, S.Member, andD.Davidov, “Absorbing Frequency-Selective-Surface for the mm-Wave Range,” IEEE Trans. Antennas Propag., vol. 56, no. 8, pp. 2649–2655, 2008. [15] L.Cai et al., “Super-stretchable, Transparent Carbon Nanotube-Based Capacitive Strain Sensors for Human Motion Detection,” Sci. Rep., vol. 3, no. 3048, pp. 1–9, 2013. [16] Z.Cui, Y.Han, Q.Huang, J.Dong, andY.Zhu, “Electrohydrodynamic Printing of Silver Nanowires for Flexible and Stretchable Electronics,” Nanoscale, no. 15, pp. 6806–6811, 2018. [17] M. H. B.Ucar, A.Sondas, andY. E.Erdemli, “Switchable Split-Ring Frequency Selective Surfaces,” Prog. Electromagn. Res. B, vol. 6, pp. 65–79, 2008. [18] V. F.Barros, F.Carlos, G.Silva, A. L. P. S.Campos, G.Silva, andA. G.Neto, “A Novel Simple Convoluted Geometry to Design Frequency Selective Surfaces for Applications at ISM and UNII Bands,” J. Microwaves, Optoelectron. Electromagn. Appl., vol. 16, no. 2, pp. 553–563, 2017. [19] M.Yan et al., “A Novel Miniaturized Frequency Selective Surface With Stable Resonance,” IEEE Antennas Wirel. Propag. Lett., vol. 13, pp. 639–641, 2014. [20] J. P.Gianvittorio, J.Romeu, S.Blanch, andY.Rahmat-samii, “Self-Similar Prefractal Frequency Selective Surfaces for Multiband and Dual-Polarized Applications,” IEEE Trans. Antennas Propag., vol. 51, no. 11, pp. 3088–3096, 2003. [21] N.Liu, X.Sheng, andJ.Fan, “A Compact Miniaturized Frequency Selective Surface with Stable Resonant Frequency,” Prog. Electromagn. Res. Lett., vol. 62, pp. 17–22, 2016. [22] J.Säily, A.Lamminen, andJ.Francey, “Low cost high gain antenna arrays for 60 GHz millimetre wave identification (MMID ),” in Sixth ESA Workshop on Millimetre-Wave Technology and Applications, 2011. [23] S. S. P.Shifters, M. A.Al-joumayly, S.Member, andN.Behdad, “Wideband Planar Microwave Lenses Using Sub-Wavelength Spatial Phase Shifters,” IEEE Trans. Antennas Propag., vol. 59, no. 12, pp. 4542–4552, 2011. [24] B.-I. W.Isaac M. Ehrenberg, Sanjay E. Sarma, “A Three-dimensional Self-supporting Low Loss Microwave Lens with a Negative Refractive Index,” J. Appl. Phys., vol. 112, no. 073114, pp. 1–5, 2012. [25] E. A.Parker andA. N. A.ElSheikh, “Convoluted Array Elements and Reduced Size Unit Cells for Frequency-selective Surfaces,” IEEE PROCEEDINGS-H, vol. 138, no. 1, pp. 19–22, 1991. [26] B.Sanz-Izquierdo, J.-B. R.E. A. Parker, andJ. C. B.Department, “Singly and Dual Polarised Convoluted Frequency Selective Structures,” IEEE Trans. Antennas Propag., vol. 58, no. 3, 2010. [27] R. S.Anwar, L.Mao, andH.Ning, “Frequency Selective Surfaces : A Review,” Appl. Sci., vol. 8, no. 1689, pp. 1–47, 2018. [28] F.Huang, C.Chiu, T.Wu, andY.Chiou, “A Circular-Ring Miniaturized-Element Metasurface With Many Good Features for Frequency Selective Shielding Applications,” IEEE Trans. Electromagn. Compat., vol. 57, no. 3, pp. 365–374, 2015. [29] S.Mohamad, A.Momeni, H.Abadi, S.Member, N.Behdad, andS.Member, “Wideband Linear-to-Circular Polarization Converters Based on Miniaturized-Element Frequency Selective Surfaces,” IEEE Trans. Antennas Propag., vol. 64, no. 2, pp. 525–534, 2016. [30] I.Russo, L.Boccia, G.Amendola, G.DiMassa, andV. P.Bucci, “Tunable Pass-Band FSS for Beam Steering Applications,” in Fourth European Conference on Antennas and Propagation, 2010, pp. 1–4. [31] A.Wideband et al., “A Wideband, Pressure-Driven, Liquid-Tunable Frequency Selective Surface,” IEEE Microw. Wirel. Components Lett., vol. 21, no. 9, pp. 465–467, 2011. [32] T.Bhattacharjee, H.Jiang, andN.Behdad, “Large-Scale Fluidic Tuning of Subwavelength Periodic Structures,” IEEE Antennas Wirel. Propag. Lett., vol. 14, pp. 190–193, 2015. [33] C.Lee, R.Sainati, R.Franklin, andR.Harjani, “Fluidic Switching and Tuning of Fabry-Perot Antenna,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, 2015, pp. 2211–2212. [34] M.Li andN.Behdad, “Fluidically Tunable Frequency Selective / Phase Shifting Surfaces for High-Power,” IEEE Trans. Antennas Propag., vol. 60, no. 6, pp. 2748–2759, 2012. [35] N.Behdad, “Liquid-Tunable Frequency Selective Surfaces,” IEEE Microw. Wirel. Components Lett., vol. 20, no. 8, pp. 423–425, 2010. [36] J.Mohd andM. A. G.Martin Leary, Aleksandar Subic, “A Review of Shape Memory Slloy Research, Applications and Opportunities,” ARPN J. Eng. Appl. Sci., vol. 12, no. 4, pp. 1254–1259, 2017. [37] Y.Bellouard, “Shape Memory Alloys for Microsystems: A Review from a Material Research Perspective,” Mater. Sci. Eng. A, vol. 481–482, no. 1-2 C, pp. 582–589, 2008. [38] X.Chen, J.Gao, C.Fang, N.Xu, Y.Wang, andY.Tang, “Deformable Frequency Selective Surface Structure with Tuning Capability through Thermoregulating,” Opt. Express, vol. 23, no. 12, pp. 1269–1275, 2015. [39] S. A.Nauroze, B.Tehrani, andM.Tentzeris, “An Inkjet-printed Origami-based Frequency Selective Surface with Wide Frequency and Bandwidth Tunability,” in 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, 2018, pp. 1677–1678. [40] K.Fuchi, G.Bazzan, A. S.Gillman, G. H.Huff, P. R.Buskohl, andE. J.Alyanak, “Frequency Tuning through Physical Reconfiguration of a Corrugated Origami Frequency Selective Surface,” in 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, 2017, pp. 411–412. [41] S.Abdullah, L. S.Novelino, M. M.Tentzeris, andG. H.Paulino, “Continuous-range Tunable Multilayer Frequency selective Surfaces using Origami and Inkjet Pinting,” vol. 116, no. 22, 2019. [42] D.Sessions et al., “Investigation of Fold-Dependent Behavior in an Origami-Inspired FSS under Normal Incidence,” Prog. Electromagn. Res. M, vol. 63, pp. 131–139, 2018. [43] K. L.Lin andK.Jain, “Design and Fabrication of Stretchable Multilayer Self-Aligned Interconnects for Flexible Electronics and Large-Area Sensor Arrays Using Excimer Laser Photoablation,” IEEE Electron Device Lett., vol. 30, no. 1, pp. 14–17, 2009. [44] T.Yamashita, S.Khumpuang, K.Miyake, andT.Itoh, “Characterization of Contact Structure for Woven Electronic Textile Using Conductive Polymer Micro-Cantilever Array,” Electron. Commun. Japan, vol. 97, no. 1, pp. 66–70, 2014. [45] S.Milici et al., “Wireless Breathing Sensor Based on Wearable Modulated Frequency Selective Surface,” IEEE Sensors J. Wirel., vol. 17, no. 5, pp. 1285–1292, 2017. [46] S.Milici et al., “Wireless Wearable Magnetometer-based Sensor for Sleep Quality Monitoring,” IEEE Sens. J., vol. 18, no. 5, pp. 2145–2152, 2018. [47] Y.Lai, Y.Chen, andY. J.Yang, “A Novel CNT-PDMS-Based Tactile Sensing Array With Resistivity Retaining and Recovering by Using Dielectrophoresis Effect,” J. Microelectromechanical Syst., vol. 21, no. 1, pp. 217–223, 2012. [48] L.Dahne et al., “High-Conductivity Elastomeric Electronics,” Adv. Mater., vol. 16, no. 5, pp. 393–397, 2004. [49] F.Bossuyt, T.Vervust, andJ.Vanfleteren, “Stretchable Electronics Technology for Large Area Applications: Fabrication and Mechanical Characterization,” IEEE Trans. Components, Packag. Manuf. Technol., vol. 3, no. 2, pp. 229–235, 2013. [50] M.Ghebrebrhan et al., “Textile Frequency Selective Surface,” IEEE Microw. Wirel. Components Lett., vol. 27, no. 11, pp. 989–991, 2017. [51] I.Repository, “Fabric Based Frequency Selective Surfaces using Weaving and Screen Printing,” Electron. Lett., vol. 49, no. 24, pp. 1507–1509, 2013. [52] A.Tennant, W.Hurley, andT.Dias, “Experimental Knitted, Textile Frequency Selective Surfaces,” Electron. Lett., vol. 48, no. 22, 2012. [53] R. D.Seager, A.Chauraya, J.Bowman, M.Broughton, andN.Nimkulrat, “Fabrication of Fabric Based Frequency Selective Surfaces (FSS),” in The 8th European Conference on Antennas and Propagation, 2014, pp. 1978–1980. [54] S.Cheng andZ.Wu, “Microfluidic stretchable RF electronics,” Lab Chip, vol. 10, no. 23, p. 3227, 2010. [55] Y.Huang, Y.Wang, L.Xiao, H.Liu, W.Dong, andZ.Yin, “Microfluidic Serpentine Antennas with Designed Mechanical Tunability,” Lab Chip, vol. 14, no. 21, pp. 4205–4212, 2014. [56] J.Ahn andJ. H.Je, “Stretchable Electronics: Aaterials, Architectures and Integrations,” J. Phys. D. Appl. Phys., vol. 45, no. 10, p. 3001, 2012. [57] S.Yang, P.Liu, M.Yang, Q.Wang, J.Song, andL.Dong, “From Flexible and Stretchable Meta-Atom to Metamaterial: A Wearable Microwave Meta-Skin with Tunable Frequency Selective and Cloaking Effects,” Sci. Rep., vol. 6, no. November 2015, pp. 1–8, 2016. [58] F.Costa, A.Monorchio, andG.Manara, “An Overview of Equivalent Circuit Modeling Techniques of Frequency Selective Surfaces and Metasurfaces,” ACES J., vol. 29, no. 12, pp. 960–976, 2014. [59] A. J. C. B. Saint-Venant, Memoire sur la Torsion des Prismes. 1855. [60] C. O.Horgan andL. E.Payne, “Saint-Venant’s Principle in Linear Isotropic Elasticity for Incompressible or Nearly Incompressible Materials,” J. Elast., no. 46, pp. 43–52, 1997. [61] J. K.Knowles andC. E.Sternberg, “On Saint-Venant’s Principle in the Two-Dimensional Linear Theory of Elasticity,” Arch. Ration. Mech. Anal., vol. 21, no. 1, pp. 1–22, 1966. [62] R. C.Hibbeler, Mechanics of Materials, 9th ed. Pearson Prentice Hall Inc., 2014. [63] E. M.Terentjev, “Precise Determination of the Poisson Ratio in soft Materials with 2D Digital Image Correlation,” Soft Matter Pap. Cite, vol. 9, no. 26, pp. 6011–6198, 2013. [64] S. K.Sia andG. M.Whitesides, “Review Microfluidic devices fabricated in poly ( dimethylsiloxane ) for biological studies,” Electrophor. 2003, vol. 24, pp. 3563–3576, 2003. [65] S. H.Kim, J.Moon, J. H.Kim, S. M.Jeong, andS.Lee, “Flexible, Stretchable and Implantable PDMS Encapsulated Cable for Implantable Medical Device,” Biomed. Eng. Lett., vol. 1, pp. 199–203, 2011. [66] G.Kovacs, L.Düring, S.Michel, andG.Terrasi, “Stacked Dielectric Elastomer Actuator for Tensile Force Transmission,” Sensors Actuators, A Phys., vol. 155, no. 2, pp. 299–307, 2009. [67] Q.Wang, M.Tahir, J.Zang, andX.Zhao, “Dynamic Electrostatic Lithography : Multiscale On-Demand Patterning on Large-Area Curved Surfaces,” Adv. Mater., vol. 24, pp. 1947–1951, 2012. [68] A.Boughriet, S.Member, C.Legrand, andA.Chapoton, “Noniterative Stable Transmission / Reflection Method for Low-Loss Material Complex Permittivity Determination,” IEEE Trans. Microw. Theory Tech., vol. 45, no. 1, pp. 52–57, 1997. [69] F. E.Poindexter, “Mercury Vapor Pressure at Low Temperatures,” Phys. Rev., vol. 26, no. 859, pp. 859–868, 1925. [70] P.Surmann andH.Zeyat, “Voltammetric Analysis Using a Self-renewable Non-mercury Electrode,” Anal. Bioanal. Chem., vol. 383, pp. 1009–1013, 2005. [71] T.Liu, P.Sen, C. C. J.Kim, andA. C. A.Measurements, “Characterization of Nontoxic Liquid-Metal Alloy Galinstan for Applications in Microdevices,” J. Microelectromechanical Syst., vol. 21, no. 2, pp. 443–450, 2012. [72] C.Karcher, V.Kocourek, andD.Schulze, “Experimental Investigations of Electromagnetic Instabilities of Free Surfaces in a Liquid Metal Drop,” in International Scientific Colloquium Modelling for Electromagnetic Processing, 2003. [73] R. A.Serway, Principles of Physics 2nd, 2nd ed. Saunders Colege Division, 1997. [74] M. J.Regan et al., “X-ray Study of the Oxidation of Liquid-gallium Surfaces,” Phys. Rev. B, vol. 55, no. 16, pp. 786–790, 1997. [75] P. A.Giguere andD.Lamontagne, “Polarography with a Dropping Gallium Electrode,” Science (80-. )., vol. 120, no. 3114, pp. 390–391, 1954. [76] Smooth-on Inc, “EcoflexTM 00-30 Technical Data.” [Online]. Available: https://www.smooth-on.com/products/ecoflex-00-30/. [77] S.Jun, S.Harshal, P.Egor, P.Jamie, andF.Dario, “Soft Pneumatic Gelatin Actuator for Edible Robotics,” in IEEE/RSJ International Conference on Intelligent Robots and Systems, 2017, pp. 3–8. [78] P. K.Chu, J. Y.Chen, L. P.Wang, andN.Huang, “Plasma-surface Modification of Biomaterials,” Mater. Sci. Eng. R Reports, vol. 36, no. 5–6, pp. 143–206, 2002. [79] J.Tang, H.Guo, M.Zhao, J.Yang, andD.Tsoukalas, “Highly Stretchable Electrodes on Wrinkled Polydimethylsiloxane Substrates,” Sci. Rep., vol. 5, no. 16527, pp. 1–9, 2015. [80] T.Yamada et al., “A stretchable Carbon Nanotube Strain Sensor for Human-motion Detection,” Nat. Nanotechnol., vol. 6, no. 5, pp. 296–301, 2011. [81] K.Chun et al., “Highly Conductive, Printable and Stretchable Composite Films of Carbon Nanotubes and Silver,” Nat. Nanotechnol., vol. 5, no. 12, pp. 853–857, 2010. [82] M. A. H.Khondoker andD.Sameoto, “Fabrication Methods and Applications of Microstructured Gallium based Liquid Metal Alloys,” Smart Mater. Struct., vol. 25, no. 9, p. 093001, 2016. [83] M. D.Dickey, R. C.Chiechi, R. J.Larsen, E. A.Weiss, D. A.Weitz, andG. M.Whitesides, “Eutectic Gallium-indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature,” Adv. Funct. Mater., vol. 18, no. 7, pp. 1097–1104, 2008. [84] M.Rashed, C. B.Eaker, E. F.Bowden, andM. D.Dickey, “Giant and Switchable Surface Activity of Liquid Metal via Surface Oxidation,” Appl. Phys. Sci., vol. 111, no. 39, pp. 14047–14051, 2014. [85] F.Scharmann et al., “Viscosity Effect on GaInSn Studied by XPS,” Surf. Interface Anal., vol. 36, no. 8, pp. 981–985, 2004. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74708 | - |
dc.description.abstract | 在這項研究中,我們提出了一種可拉伸式頻率選擇表面,由液態金屬組成,並嵌入的高度可拉伸的聚合物Ecoflex中。 Ecoflex是一種有機矽基聚合物,具有高達900%的拉伸範圍。為了實現寬頻調變,每個單元結構都設計成沙漏形狀的迴圈,並在內嵌入金屬液體。通過施加外部應力,由於泊松比的影響,可拉伸式頻率選擇表面伸長並且身長比從正方形變為矩形。在拉伸時,金屬液體保留在矽膠基板的孔洞內並根據孔道的變形而變形成符合孔道的尺寸。根據等效電路模型,單元結構變形將導致單元結構等效之電容及電感值造成共振頻率偏離。
本研究設計,製造和測試了尺寸為16乘16單元結構的原型。使用網絡分析儀(VNA)在微波暗室中測量頻率選擇表面的頻率響應。結果顯示,當測量頻率選擇表面受到水平拉伸時,帶阻移動到較低頻率。同樣的,當測量頻率選擇表面受到垂直拉伸時,帶阻移動到較高頻率。帶阻的可調值為7 GHz(以可調比例表示為69.31%)。可調頻率的移動範圍完全覆蓋X波段和C波段和Ku波段的一部分。由於本篇研究提出的頻率選擇表面不需要任何電子元件或移動物件,因此具有在惡劣環境下操作的能力。與常用的可調頻率選擇表面相比,所提出的的頻率選擇表面具有緊湊的尺寸,易於驅動的特性以及超寬的頻率可調範圍。 | zh_TW |
dc.description.abstract | In this research, we proposed a stretchable FSS composed of liquid metal embedded within a commercial-available highly stretchable polymer, Ecoflex. Ecoflex is a silicone-based polymer with a large strain of up to 900%. In order to achieve wide-band tuning, each unit cell was designed to have a sandglass-like shape and embedded with metallic liquids. By applying external stress, the FSS elongated and the aspect ratio of the FSS change from square to rectangle due to Poisson's ratio. While stretching, the metallic liquid retained within the substrate and flew according to the deformed channels, and the resonance frequency deviated as the FSS being deformed. A prototype with a dimension of 16 by 16 unit cells was designed, fabricated, and tested. The frequency response of the FSS is measured in the microwave chamber by using the vector network analyzer (VNA). It was demonstrated that the stop-band shifted to the lower frequency while the FSS was stretched horizontally. Likewise, the stop-band shifted to the higher frequency while the FSS was stretched vertically. The total deviation of the stop-band is 7 GHz (69.31% in terms of fractional bandwidth). The shifting range of the frequency completely covers the X-band and a portion of the C-band and the Ku-band. And an experiment was conducted to test the ability to suppress the scattering from different directions. Since the proposed FSS does not require any electronic components or moving parts, it has a much higher possibility to survive in a harsh environment. Compared to the commonly-used electronic tunable FSSs the proposed FSS has a compact size, easy actuation method and ultra-wide tuning range. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T09:06:18Z (GMT). No. of bitstreams: 1 ntu-109-R06522525-1.pdf: 6821653 bytes, checksum: 1e0f9aec6ded5134d9e4c2f20cbc481c (MD5) Previous issue date: 2020 | en |
dc.description.tableofcontents | 致謝 i
中文摘要 ii Table of Contents iv List of Tables vii List of Figures viii 1. Introduction 1 1.1 Foreword 1 1.2 Research Motive and Purpose. 5 1.3 Literature Review 7 1.3.1 Periodic Structure 7 1.3.2 Single Layer FSS 9 1.3.3 Multi-Layer FSS 9 1.3.4 Electronic Type FSS 11 1.3.5 Fluid Type FSS 13 1.3.6 Shape Memory Alloys type FSS 14 1.3.7 Deformation and Transformation Type FSS 15 1.3.8 Soft and Stretchable FSS 17 2. Related Theory 19 2.1 Relation between Shape and Impedance 19 2.2 Scattering Parameters 32 2.3 Equivalent Circuit Model 36 2.4 Saint-Venant's principle 40 2.5 Stress Concentration 42 3. FSS Design and Material Property 44 3.1 Ultra-Stretchable Silicone 45 3.2 Liquid Conductive Material 47 4. Simulation 50 4.1 ADS Microwave Circuit Simulation 50 4.2 CST Spatial Simulation Software 51 4.3 Ansys Mechanic Simulation 53 5. Manufacture Process 54 5.1 Manufacture Process of the FSS 58 5.2 Clamp Design and Process 63 6. Experiment and Measurement 65 6.1 Measurement method 65 6.1.1 Time/Frequency domain Measurement 65 6.1.2 Data processing 67 6.2 Introduction to Measuring Equipment 68 6.2.1 Vector Network Analyzer 68 6.2.2 Rectangular Waveguide 70 6.2.3 Horn Antenna 71 6.2.4 Pyramidal Absorber 74 6.2.5 RF Anechoic Chamber 75 6.3 Experiment and Measurement Setup 77 6.3.1 Rectangular waveguide measurement 77 6.3.2 Full size FSS measurement 79 7. Measurement and Result 83 8. Conclusion and Future Work 90 References 92 | |
dc.language.iso | en | |
dc.title | 極寬頻可調拉伸式頻率選擇表面之大面積應用 | zh_TW |
dc.title | Ultra-wide Band Tuning Stretchable Frequency Selective
Surface for Large-scale Application | en |
dc.type | Thesis | |
dc.date.schoolyear | 108-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 周元昉(Yuan-Fang Chou),莊嘉揚(Jia-Yang Juang) | |
dc.subject.keyword | 可調頻率選擇表面,軟性材料,液態金屬嵌入,超寬頻可調, | zh_TW |
dc.subject.keyword | Frequency Selective Surface (FSS),embedded Liquid metal,stretchable silicon,ultra-wideband tuning,band-stop Filter (BSF), | en |
dc.relation.page | 102 | |
dc.identifier.doi | 10.6342/NTU202000016 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2020-01-07 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-109-1.pdf 目前未授權公開取用 | 6.66 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。