Please use this identifier to cite or link to this item:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73064Full metadata record
| ???org.dspace.app.webui.jsptag.ItemTag.dcfield??? | Value | Language |
|---|---|---|
| dc.contributor.advisor | 吳錫侃(Shyi-Kaan Wu) | |
| dc.contributor.author | Yi-Cheng Lai | en |
| dc.contributor.author | 賴以晟 | zh_TW |
| dc.date.accessioned | 2021-06-17T07:15:57Z | - |
| dc.date.available | 2024-07-23 | |
| dc.date.copyright | 2019-07-23 | |
| dc.date.issued | 2019 | |
| dc.date.submitted | 2019-07-14 | |
| dc.identifier.citation | [1] K. H. Huang, J.W. Yeh, A Study on the Multicomponent Alloy Systems Containing Equal- mole Elements, National Tsing Hua University, Taiwan, 1996.
[2] M.-H. Tsai, J.-W. Yeh, High-entropy alloys: a critical review, Mater. Res. Lett. 2(3) (2014) 107-123. [3] J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Adv. Eng. Mater. 6(5) (2004) 299-303. [4] C.S. Smith, Four Outstanding Researchers in Metallurgical History, Am. Soc. Test. Mater. 1963. [5] B. Cantor, K.B. Kim, P.J. Warren, Novel multicomponent amorphous alloys, Mater. Sci. Forum 386-388 (2002) 27-32. [6] S. Ranganathan, Alloyed pleasures: Multimetallic cocktails, Curr. Sci. 85 (2003) 1404-1406. [7] B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Microstructural development in equiatomic multicomponent alloys, Mater. Sci. Eng. A 375-377 (2004) 213-218. [8] B.S. Murty, J.W. Yeh, S. Ranganathan, P.P. Bhattacharjee, High-entropy Alloys, 2014. [9] E.J. Pickering, N.G. Jones, High-entropy alloys: a critical assessment of their founding principles and future prospects, Int. Mater. Rev. 61(3) (2016) 183-202. [10] D.B. Miracle, O.N. Senkov, A critical review of high entropy alloys and related concepts, Acta Mater. 122 (2017) 448-511. [11] B. Schuh, F. Mendez-Martin, B. Völker, E.P. George, H. Clemens, R. Pippan, A. Hohenwarter, Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation, Acta Mater. 96 (2015) 258-268. [12] F. Otto, A. Dlouhý, K.G. Pradeep, M. Kuběnová, D. Raabe, G. Eggeler, E.P. George, Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures, Acta Mater. 112 (2016) 40-52. [13] E.J. Pickering, R. Muñoz-Moreno, H.J. Stone, N.G. Jones, Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi, Scripta Mater. 113 (2016) 106-109. [14] H. Shahmir, J. He, Z. Lu, M. Kawasaki, T.G. Langdon, Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion, Mater. Sci. Eng. A 676 (2016) 294-303. [15] W. Zhou, L.M. Fu, P. Liu, X.D. Xu, B. Chen, G.Z. Zhu, X.D. Wang, A.D. Shan, M.W. Chen, Deformation stimulated precipitation of a single-phase CoCrFeMnNi high entropy alloy, Intermetallics 85 (2017) 90-97. [16] G. Laplanche, S. Berglund, C. Reinhart, A. Kostka, F. Fox, E.P. George, Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys, Acta Mater. 161 (2018) 338-351. [17] Y.-C. Huang, C.-S. Tsao, S.-K. Wu, C. Lin, C.-H. Chen, Nano-precipitates in severely deformed and low-temperature aged CoCrFeMnNi high-entropy alloy studied by synchrotron small-angle X-ray scattering, Intermetallics 105 (2019) 146-152. [18] C.-J. Tong, M.-R. Chen, J.-W. Yeh, S.-J. Lin, S.-K. Chen, T.-T. Shun, S.-Y. Chang, Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metall. Mater. Trans. A 36(5) (2005) 1263-1271. [19] H.-P. Chou, Y.-S. Chang, S.-K. Chen, J.-W. Yeh, Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys, Mater. Sci. Eng. B 163(3) (2009) 184-189. [20] Y.-F. Kao, T.-J. Chen, S.-K. Chen, J.-W. Yeh, Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloys, J. Alloys Compd. 488(1) (2009) 57-64. [21] W.-R. Wang, W.-L. Wang, S.-C. Wang, Y.-C. Tsai, C.-H. Lai, J.-W. Yeh, Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys, Intermetallics 26 (2012) 44-51. [22] T.-T. Shun, Y.-C. Du, Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy, J. Alloys Compd. 479(1) (2009) 157-160. [23] W.-R. Wang, W.-L. Wang, J.-W. Yeh, Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures, J. Alloys Compd. 589 (2014) 143-152. [24] Q.H. Tang, Y. Huang, Y.Y. Huang, X.Z. Liao, T.G. Langdon, P.Q. Dai, Hardening of an Al0.3CoCrFeNi high entropy alloy via high-pressure torsion and thermal annealing, Mater. Lett. 151 (2015) 126-129. [25] B. Gwalani, V. Soni, D. Choudhuri, M. Lee, J.Y. Hwang, S.J. Nam, H. Ryu, S.H. Hong, R. Banerjee, Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2, Scripta Mater. 123 (2016) 130-134. [26] B. Gwalani, V. Soni, M. Lee, S.A. Mantri, Y. Ren, R. Banerjee, Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy, Mater. Design 121 (2017) 254-260. [27] J.C. Rao, H.Y. Diao, V. Ocelík, D. Vainchtein, C. Zhang, C. Kuo, Z. Tang, W. Guo, J.D. Poplawsky, Y. Zhou, P.K. Liaw, J.T.M. De Hosson, Secondary phases in AlxCoCrFeNi high-entropy alloys: An in-situ TEM heating study and thermodynamic appraisal, Acta Mater. 131 (2017) 206-220. [28] B. Gwalani, S. Gorsse, D. Choudhuri, M. Styles, Y. Zheng, R.S. Mishra, R. Banerjee, Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing, Acta Mater. 153 (2018) 169-185. [29] A. Gali, E.P. George, Tensile properties of high- and medium-entropy alloys, Intermetallics 39 (2013) 74-78. [30] F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, E.P. George, The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy, Acta Mater. 61(15) (2013) 5743-5755. [31] B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, R.O. Ritchie, A fracture-resistant high-entropy alloy for cryogenic applications, Science 345(6201) (2014) 1153. [32] O.N. Senkov, J.M. Scott, S.V. Senkova, D.B. Miracle, C.F. Woodward, Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy, J. Alloy Compd. 509(20) (2011) 6043-6048. [33] O.N. Senkov, G.B. Wilks, J.M. Scott, D.B. Miracle, Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys, Intermetallics 19(5) (2011) 698-706. [34] X. Yang, Y. Zhang, P.K. Liaw, Microstructure and Compressive Properties of NbTiVTaAlx High Entropy Alloys, Procedia Eng. 36 (2012) 292-298. [35] O.N. Senkov, S.V. Senkova, D.B. Miracle, C. Woodward, Mechanical properties of low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system, Mater. Sci. Eng. A 565 (2013) 51-62. [36] M.-H. Chuang, M.-H. Tsai, W.-R. Wang, S.-J. Lin, J.-W. Yeh, Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys, Acta Mater. 59(16) (2011) 6308-6317. [37] M.A. Hemphill, T. Yuan, G.Y. Wang, J.W. Yeh, C.W. Tsai, A. Chuang, P.K. Liaw, Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys, Acta Mater. 60(16) (2012) 5723-5734. [38] Z. Tang, T. Yuan, C.-W. Tsai, J.-W. Yeh, C.D. Lundin, P.K. Liaw, Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy, Acta Mater. 99 (2015) 247-258. [39] J.W. Yeh, Recent progress in high-entropy alloys, Ann. Chim. Sci. des Mat. 31(6) (2006) 633-648. [40] D. Miracle, J. D. Miller, O. Senkov, C. Woodward, M. D. Uchic, J. Tiley, Exploration and Development of High Entropy Alloys for Structural Applications, Entropy 16 (2013) 494-525. [41] O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, P.K. Liaw, Refractory high-entropy alloys, Intermetallics 18(9) (2010) 1758-1765. [42] R. Kozak, A. Sologubenko, W. Steurer, Single-phase high-entropy alloys – an overview, Z. Krist., 2015, p. 55. [43] P.K. Huang, J.W. Yeh, T.T. Shun, S.K. Chen, Multi-Principal-Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating, Adv. Eng. Mater. 6(1‐2) (2004) 74-78. [44] S. Gorsse, D.B. Miracle, O.N. Senkov, Mapping the world of complex concentrated alloys, Acta Mater. 135 (2017) 177-187. [45] D.R. Gaskell, D.E. Laughlin, Introduction to the Thermodynamics of Materials, CRC Press, 2017. [46] Z. Li, S. Zhao, R.O. Ritchie, M.A. Meyers, Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys, Prog. Mater. Sci. 102 (2019) 296-345. [47] C.-J. Tong, Y.-L. Chen, J.-W. Yeh, S.-J. Lin, S.-K. Chen, T.-T. Shun, C.-H. Tsau, S.-Y. Chang, Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metall. Mater. Trans. A 36(4) (2005) 881-893. [48] M.S. Lucas, G.B. Wilks, L. Mauger, J.A. Muñoz, O.N. Senkov, E. Michel, J. Horwath, S.L. Semiatin, M.B. Stone, D.L. Abernathy, E. Karapetrova, Absence of long-range chemical ordering in equimolar FeCoCrNi, Appl. Phys. Lett. 100(25) (2012) 251907. [49] C. Ng, S. Guo, J. Luan, S. Shi, C.T. Liu, Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy, Intermetallics 31 (2012) 165-172. [50] C.-W. Tsai, Y.-L. Chen, M.-H. Tsai, J.-W. Yeh, T.-T. Shun, S.-K. Chen, Deformation and annealing behaviors of high-entropy alloy Al0.5CoCrCuFeNi, J. Alloys Compd. 486(1) (2009) 427-435. [51] F.J. Wang, Y. Zhang, G.L. Chen, Atomic packing efficiency and phase transition in a high entropy alloy, J. Alloys Compd. 478(1) (2009) 321-324. [52] C. Li, Y. Xue, M. Hua, T. Cao, L. Ma, L. Wang, Microstructure and mechanical properties of AlxSi0.2CrFeCoNiCu1−x high-entropy alloys, Mater. Design 90 (2016) 601-609. [53] J.-W. Yeh, Physical Metallurgy of High-Entropy Alloys, JOM 67(10) (2015) 2254-2261. [54] J.-W. Yeh, S.-Y. Chang, Y.-D. Hong, S.-K. Chen, S.-J. Lin, Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal elements, Mater. Chem. Phys. 103(1) (2007) 41-46. [55] R.W. Cahn, P. Hassen, Physical Metallurgy, 4 ed., Elsevier Science, Amsterdam, 1996. [56] K.Y. Tsai, M.H. Tsai, J.W. Yeh, Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys, Acta Mater. 61(13) (2013) 4887-4897. [57] J.-W. Yeh, Alloy Design Strategies and Future Trends in High-Entropy Alloys, JOM 65(12) (2013) 1759-1771. [58] M.-H. Tsai, J.-W. Yeh, J.-Y. Gan, Diffusion barrier properties of AlMoNbSiTaTiVZr high-entropy alloy layer between copper and silicon, Thin Solid Films 516(16) (2008) 5527-5530. [59] Z.P. Lu, H. Wang, M.W. Chen, I. Baker, J.W. Yeh, C.T. Liu, T.G. Nieh, An assessment on the future development of high-entropy alloys: Summary from a recent workshop, Intermetallics 66 (2015) 67-76. [60] B.D. Miracle, D.J. Miller, N.O. Senkov, C. Woodward, D.M. Uchic, J. Tiley, Exploration and Development of High Entropy Alloys for Structural Applications, Entropy 16(1) (2014). [61] Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu, Microstructures and properties of high-entropy alloys, Prog. Mater. Sci. 61 (2014) 1-93. [62] J.Y. He, C. Zhu, D.Q. Zhou, W.H. Liu, T.G. Nieh, Z.P. Lu, Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures, Intermetallics 55 (2014) 9-14. [63] C. Li, J.C. Li, M. Zhao, Q. Jiang, Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys, J. Alloys Compd. 504 (2010) S515-S518. [64] S. Gangireddy, B. Gwalani, V. Soni, R. Banerjee, R.S. Mishra, Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC, Mater. Sci. Eng. A 739 (2019) 158-166. [65] E.O. Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, P. Phys. Soc. B 64(9) (1951) 747-753. [66] N.J. Petch, The Cleavage Strength of Polycrystals, J. Iron Steel I. 174 (1953) 25-28. [67] E. Anderson, D. Law, W. King, J. Spreadborough, The relationship between lower yield stress and grain size in Armco iron, T. Metall. Soc. AIME 242(1) (1968). [68] A.A.W. Thompson, Yielding in nickel as a function of grain or cell size, Acta Metall. 23(11) (1975) 1337-1342. [69] J. Schiøtz, F.D. Di Tolla, K.W. Jacobsen, Softening of nanocrystalline metals at very small grain sizes, Nature 391(6667) (1998) 561-563. [70] M.F. Ashby, D.R.H. Jones, Chapter 10 - Strengthening Methods and Plasticity of Polycrystals, in: M.F. Ashby, D.R.H. Jones (Eds.), Engineering Materials 1 (Fourth Edition), Butterworth-Heinemann, Boston, 2012, pp. 147-155. [71] D. Wu, J. Zhang, J.C. Huang, H. Bei, T.G. Nieh, Grain-boundary strengthening in nanocrystalline chromium and the Hall–Petch coefficient of body-centered cubic metals, Scripta Mater. 68(2) (2013) 118-121. [72] A.M. Omar, A.R. Entwisle, The effect of grain size on the deformation of niobium, Mater. Sci. Eng. 5(5) (1970) 263-270. [73] R.J. Lederich, S.M.L. Sastry, J.E. O'Neal, B.B. Rath, The effect of grain size on yield stress and work hardening of polycrystalline titanium at 295 K and 575 K, Mater. Sci. Eng. 33(2) (1978) 183-188. [74] C.P. Brittain, R.W. Armstrong, G.C. Smith, Hall-petch dependence for ultrafine grain size electrodeposited chromium, Scripta Metall. 19(1) (1985) 89-91. [75] G.D. Hughes, S.D. Smith, C.S. Pande, H.R. Johnson, R.W. Armstrong, Hall-petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickel, Scripta Metall. 20(1) (1986) 93-97. [76] X.Y. Qin, X.J. Wu, L.D. Zhang, The microhardness of nanocrystalline silver, Nanostruct. Mater. 5(1) (1995) 101-110. [77] K. Kubota, M. Mabuchi, K. Higashi, Review Processing and mechanical properties of fine-grained magnesium alloys, J. Mater. Sci. 34(10) (1999) 2255-2262. [78] V. Provenzano, R. Valiev, D.G. Rickerby, G. Valdre, Mechanical properties of nanostructured chromium, Nanostruct. Mater. 12(5) (1999) 1103-1108. [79] A.S. Khan, H. Zhang, L. Takacs, Mechanical response and modeling of fully compacted nanocrystalline iron and copper, Int. J. Plasticity 16(12) (2000) 1459-1476. [80] K.B. Yoder, A.A. Elmustafa, J.C. Lin, R.A. Hoffman, D.S. Stone, Activation analysis of deformation in evaporated molybdenum thin films, J. Phys. D Appl. Phys. 36(7) (2003) 884-895. [81] X. Zhang, H. Wang, R.O. Scattergood, J. Narayan, C.C. Koch, Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling, Mater. Sci. Eng. A 344(1) (2003) 175-181. [82] M.R. Barnett, Z. Keshavarz, A.G. Beer, D. Atwell, Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn, Acta Mater. 52(17) (2004) 5093-5103. [83] J. Chen, L. Lu, K. Lu, Hardness and strain rate sensitivity of nanocrystalline Cu, Scripta Mater. 54(11) (2006) 1913-1918. [84] E. Cerreta, C.A. Yablinsky, G.T. Gray, S.C. Vogel, D.W. Brown, The influence of grain size and texture on the mechanical response of high purity hafnium, Mater. Sci. Eng. A 456(1) (2007) 243-251. [85] A.F. Jankowski, J. Go, J.P. Hayes, Thermal stability and mechanical behavior of ultra-fine bcc Ta and V coatings, Surf. Coat. Tech. 202(4) (2007) 957-961. [86] A.F. Jankowski, J.P. Hayes, C.K. Saw, Dimensional attributes in enhanced hardness of nanocrystalline Ta–V nanolaminates, Philos. Mag. 87(16) (2007) 2323-2334. [87] Y.H. Chew, C.C. Wong, F. Wulff, F.C. Lim, H.M. Goh, Strain rate sensitivity and Hall–Petch behavior of ultrafine-grained gold wires, Thin Solid Films 516(16) (2008) 5376-5380. [88] A.S. Khan, B. Farrokh, L. Takacs, Effect of grain refinement on mechanical properties of ball-milled bulk aluminum, Mater. Sci. Eng. A 489(1) (2008) 77-84. [89] C.-Y. Hyun, J.-H. Lee, H.-K. Kim, Microstructures and mechanical properties of ultrafine grained pure Ti produced by severe plastic deformation, Res. Chem. Intermediat. 36(6) (2010) 629-638. [90] M. Zhang, B. Yang, J. Chu, T.G. Nieh, Hardness enhancement in nanocrystalline tantalum thin films, Scripta Mater. 54(7) (2006) 1227-1230. [91] Y.-C. Huang, C.-H. Su, S.-K. Wu, C. Lin, A Study on the Hall–Petch Relationship and Grain Growth Kinetics in FCC-Structured High/Medium Entropy Alloys, Entropy 21(3) (2019). [92] P.A. Beck, J.C. Kremer, L. Demer, Grain Growth in High Purity Aluminum, Phys. Rev. 71(8) (1947) 555-555. [93] J. Burke, Some factors affecting the rate of grain growth in metals, Aime Trans. 180 (1949) 73-91. [94] H.V. Atkinson, Overview no. 65: Theories of normal grain growth in pure single phase systems, Acta Metall. 36(3) (1988) 469-491. [95] H. Hu, B.B. Rath, On the time exponent in isothermal grain growth, Metall. Trans. 1(11) (1970) 3181-3184. [96] W.M. Tang, Z.X. Zheng, H.J. Tang, R. Ren, Y.C. Wu, Structural evolution and grain growth kinetics of the Fe–28Al elemental powder during mechanical alloying and annealing, Intermetallics 15(8) (2007) 1020-1026. [97] Z. Huda, T. Zaharinie, S.H. Islam, Effects of annealing parameters on grain-growth behavior of HAYNES-718 superalloy, Int. J. Phys. Sci. 6(30) (2011) 7073-7077. [98] P.A. Beck, Effect of recrystallized grain size on grain growth, J. Appl. Phys. 19(5) (1948) 507-509. [99] J.E. Burke, D. Turnbull, Recrystallization and grain growth, Prog. Met. Phys. 3 (1952) 220-292. [100] R. Fullman, Metal interfaces, Am. Soc. Met. (1952). [101] J. Nielsen, Recrystallization, grain growth and textures, Am. Soc. Met. (1966) 286. [102] J.W. Cahn, The impurity-drag effect in grain boundary motion, Acta Metall. 10(9) (1962) 789-798. [103] J.P. Drolet, A. Galibois, The impurity-drag effect on grain growth, Acta Metall. 16(12) (1968) 1387-1399. [104] D. Fan, S.P. Chen, L.-Q. Chen, Computer simulation of grain growth kinetics with solute drag, J. Mater. Res. 14(3) (1999) 1113-1123. [105] E. Hersent, K. Marthinsen, E. Nes, On the Effect of Atoms in Solid Solution on Grain Growth Kinetics, Metall. Mater. Trans. A 45(11) (2014) 4882-4890. [106] S.J. Dillon, S.K. Behera, M.P. Harmer, An experimentally quantifiable solute drag factor, Acta Mater. 56(6) (2008) 1374-1379. [107] Q. Miao, L. Hu, X. Wang, E. Wang, Grain growth kinetics of a fine-grained AZ31 magnesium alloy produced by hot rolling, J. Alloys Compd. 493(1) (2010) 87-90. [108] A. Standard, Standard test methods for determining average grain size, ASTM Int E (2012) 112-12. [109] W. Hume-Rothery, R.W. Smallman, C.W. Haworth, The Structure of Metals and Alloys, Metals and Metallurgy Trust1969. [110] S. Guo, C.T. Liu, Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase, Prog. Nat. Sci.: Mater. Int. 21(6) (2011) 433-446. [111] S. Guo, C. Ng, J. Lu, C.T. Liu, Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys, J. Appl. Phys. 109(10) (2011) 103505. [112] S. Guo, Q. Hu, C. Ng, C.T. Liu, More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase, Intermetallics 41 (2013) 96-103. [113] Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, P.K. Liaw, Solid-Solution Phase Formation Rules for Multi-component Alloys, Adv. Eng. Mater. 10(6) (2008) 534-538. [114] X. Yang, Y. Zhang, Prediction of high-entropy stabilized solid-solution in multi-component alloys, Mater. Chem. Phys. 132(2) (2012) 233-238. [115] A. Takeuchi, A. Inoue, Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element, Mater. Trans. 46(12) (2005) 2817-2829. [116] The periodic table of elements. https://www.webelements.com/). [117] M.C. Troparevsky, J.R. Morris, P.R.C. Kent, A.R. Lupini, G.M. Stocks, Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys, Phys. Rev. X 5(1) (2015) 011041. [118] O.N. Senkov, D.B. Miracle, A new thermodynamic parameter to predict formation of solid solution or intermetallic phases in high entropy alloys, J. Alloys Compd. 658 (2016) 603-607. [119] C. Suryanarayana, M.G. Norton, X-ray diffraction: a practical approach, Springer Science & Business Media2013. [120] Y.C. Huang, The Early Precipitation Behaviors of Alloys Studied by Small-Angle X-Ray Scattering Technique MSEng, National Taiwan University, 2019. [121] H. Fischmeister, B. Karlsson, Plasticity of Two-Phase Materials with a Coarse Microstructure, Z. Metall. 68 (1977) 311-327. [122] S.-L. Wang, L.E. Murr, Effect of prestrain and stacking-fault energy on the application of the Hall-Petch relation in fcc metals and alloys, Metallography 13(3) (1980) 203-224. [123] P. Kotval, O. Nestor, The effects of solute additions on the stacking fault energy of a nickel-base superalloy, Trans Met Soc AIME 245(6) (1969) 1275-1278. [124] P.C.J. Gallagher, The influence of alloying, temperature, and related effects on the stacking fault energy, Metall. Trans. 1(9) (1970) 2429-2461. [125] S.L. Shang, C.L. Zacherl, H.Z. Fang, Y. Wang, Y. Du, Z.K. Liu, Effects of alloying element and temperature on the stacking fault energies of dilute Ni-base superalloys, J. Phys.-Condens. Mat. 24(50) (2012) 505403. [126] S.F. Liu, Y. Wu, H.T. Wang, J.Y. He, J.B. Liu, C.X. Chen, X.J. Liu, H. Wang, Z.P. Lu, Stacking fault energy of face-centered-cubic high entropy alloys, Intermetallics 93 (2018) 269-273. [127] N. Kumar, Q. Ying, X. Nie, R.S. Mishra, Z. Tang, P.K. Liaw, R.E. Brennan, K.J. Doherty, K.C. Cho, High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy, Mater. Design 86 (2015) 598-602. [128] Z. Li, S. Zhao, H. Diao, P.K. Liaw, M.A. Meyers, High-velocity deformation of Al(0.3)CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure, Sci. Rep. 7 (2017) 42742-42742. [129] B. Gwalani, R. Salloom, T. Alam, S.G. Valentin, X. Zhou, G. Thompson, S.G. Srinivasan, R. Banerjee, Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys, Mater. Res. Lett. 7(7) (2019) 267-274. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73064 | - |
| dc.description.abstract | 本研究針對兩種高熵合金(HEA) CoCrFeMnNi及Al0.2CoCrFeNi，經80%冷滾軋及其後之低溫時效及再結晶退火等對其機械性質及顯微結構的影響進行探討。XRD結果顯示兩種HEAs在滾軋完以及其後的再結晶退火後皆為FCC單相結構。針對CoCrFeMnNi HEA，在80%冷滾軋後直接在450°C/500°C/700°C 進行低溫時效，並測得其硬度隨時效時間變化之曲線。為得知有析出物之後再經短時間退火對機械性質變化的影響，針對冷滾軋後於500°C經析出一段時間後，再於700°C/900°C退火並隨退火時間量測其硬度變化。此外，本研究也比較了未有析出物以及經500°C不同時間的析出後再於900°C/700°C短時間退火之微硬度變化，結果顯示析出強化的效果在900°C短時間退火後便消失，但在700°C者硬度僅略微下降。之後又將700°C短時間退火的試片繼續進行500°C的長時間時效並測量其硬度變化，發現在預先析出過的試片中硬度會較早達到飽和值。在Al0.2CoCrFeNi HEA的部分，在80%冷滾軋後於550°C進行時效，發現其硬度隨時效時間而變化並有兩個硬度最大之峰值。為了解此硬度變化之現象，本研究選擇在550°C下能得到兩個硬度峰值的試片進行TEM的觀察。發現此兩個硬度峰值與在550°C短時間時效析出的GP zones有關，本研究並與同樣熱處理之Al0.2CoCrFeNi HEA小角度X光散射(SAXS)分析研究做比對，推測硬度變化為兩階段析出之GP zones所導致。另外，拉伸試驗的結果也顯示在兩個硬度峰之熱處理條件下具有較大之降伏強度，不過延展性隨著時效時間的增加而下降。而於550°C長時間時效所產生的析出物也由SEM/TEM觀測並做其成分之分析。此外，本研究也針對冷滾軋後先進行再結晶退火之試片進行550°C時效下的硬度變化，發現與冷滾軋再析出者不同，是由於析出物及析出機制不同所導致。而本合金在80%冷滾軋後再於不同在結晶溫度退火後之Hall-Petch關係式及晶粒成長動力學也同時被探討。 | zh_TW |
| dc.description.abstract | In this study, the aging/annealing effects on different thermomechanically treated CoCrFeMnNi and Al0.2CoCrFeNi high-entropy alloys (HEAs) are investigated via Vickers microhardess tests and OM/SEM/TEM observations. XRD results indicate the 80% cold-rolled with and without recrystallization CoCrFeMnNi and Al0.2CoCrFeNi HEAs are single-phase FCC solid solution. For CoCrFeMnNi HEA, the hardness evolutions of 80% cold-rolled and then 450°C/500°C/700°C aged specimens are revealed. In order to find out the aging/annealing effect on precipitated specimens, the hardness evolution of the specimens with and without precipitation short-time annealed at 700°C/900°C and long-time post-aged at 500°C is investigated. Experimental results indicate a rapid softening for 900°C annealing, while a moderate decrease in hardness is found for 700°C annealing. The 700°C short-time annealed and then post-aged at 500°C specimens with 500°C pre-aging reach the hardness maximum faster than those without 500°C pre-aging. For Al0.2CoCrFeNi HEA, the hardness evolution of 80% cold-rolled and then 550°C aged specimens is examined, and two hardness maxima are found and further investigated by TEM observations. Different sizes of GP zones are observed and are suggested to be related to the occurrence of two hardness maxima. The tensile tests of the 80% cold-rolled and then 550°C aged specimens also demonstrate two yield stress maxima, but the ductility decreases as the aging time increases. The hardness evolution of 80% cold-rolled and recrystallized and then aged at 550°C Al0.2CoCrFeNi specimen is also studied. The Hall-Petch relationship and grain growth kinetics of 80% cold-rolled and recrystallized Al0.2CoCrFeNi HEA are also revealed. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-17T07:15:57Z (GMT). No. of bitstreams: 1 ntu-108-R06527052-1.pdf: 7076577 bytes, checksum: ef2df50e21484acced085bd65f9b8d6a (MD5) Previous issue date: 2019 | en |
| dc.description.tableofcontents | Contents
摘要...i Abstract...ii Chapter 1 Introduction...1 Chapter 2 Literature reviews...3 2.1 Introduction to high-entropy alloys (HEAs)...3 2.1.1 Definitions...4 2.1.2 Proposed features...5 2.2 Previous works on precipitation in Cantor alloy...11 2.3 Previous works on precipitation in FCC AlxCoCrFeNi high-entropy alloys...14 2.4 Hall-Petch relationship...17 2.5 Grain growth kinetics...19 Chapter 3 Experimental procedures...37 3.1 Specimen preparation...37 3.2 Heat treatment...38 3.2.1 For Vickers microhardness tests...39 3.2.2 For X-ray diffraction (XRD) spectroscopy...40 3.2.3 For scanning electron microscope (SEM) observations...40 3.2.4 For transmission electron microscope (TEM) observations...41 3.2.5 For tensile tests...41 3.2.6 For Hall-Petch relationship analysis...41 3.2.7 For grain-growth analysis...41 3.3 Vickers microhardness tests...42 3.4 X-ray diffraction spectroscopy...42 3.5 Optical microscope observations...43 3.6 Scanning electron microscope (SEM) observations...44 3.7 Transmission electron microscope (TEM) observations...44 3.8 Tensile tests...45 Chapter 4 Results and discussion...53 4.1 Composition and phase characterization...53 4.2 Characteristics of CoCrFeMnNi HEA...58 4.2.1 Hardness evolution of 80% cold-rolled CoCrFeMnNi HEA aged at 450°C and 500°C...58 4.2.2 Hardness evolution of 80% cold-rolled CoCrFeMnNi HEA aged at 700°C...61 4.2.3 Hardness evolution of 80% cold-rolled and 500°C × 10 hrs aged CoCrFeMnNi HEA after short-time annealing at 700°C and 900°C...61 4.2.4 Hardness evolution comparison of CoCrFeMnNi HEA after different annealing treatments...63 4.3 Characteristics of Al0.2CoCrFeNi HEA...64 4.3.1 Hardness evolution of 80% cold-rolled Al0.2CoCrFeNi HEA aged at 550°C...64 4.3.2 Hardness evolution of 80% cold-rolled and then 900°C recrystallized Al0.2CoCrFeNi HEA aged at 550°C...69 4.3.3 Hall-Petch relationship of Al0.2CoCrFeNi HEA...70 4.3.4 Grain growth kinetics of Al0.2CoCrFeNi HEA...72 Chapter 5 Conclusions...107 5.1 Equiatomic CoCrFeMnNi HEA...107 5.2 Al0.2CoCrFeNi HEA...109 References...113 | |
| dc.language.iso | en | |
| dc.subject | 高熵合金 | zh_TW |
| dc.subject | 時效處理 | zh_TW |
| dc.subject | 析出硬化 | zh_TW |
| dc.subject | Hall-Petch關係式 | zh_TW |
| dc.subject | 晶粒成長動力學 | zh_TW |
| dc.subject | precipitation hardening | en |
| dc.subject | Hall-Petch relationship | en |
| dc.subject | grain growth kinetics | en |
| dc.subject | aging | en |
| dc.subject | high-entropy alloys | en |
| dc.title | 時效對冷加工及再結晶退火CoCrFeMnNi及Al0.2CoCrFeNi高熵合金之研究 | zh_TW |
| dc.title | Aging Effect on Cold-rolled and Recrystallization Annealed CoCrFeMnNi and Al0.2CoCrFeNi High-entropy Alloys | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 107-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 林新智,陳志軒,簡甄 | |
| dc.subject.keyword | 高熵合金,時效處理,析出硬化,Hall-Petch關係式,晶粒成長動力學, | zh_TW |
| dc.subject.keyword | high-entropy alloys,aging,precipitation hardening,Hall-Petch relationship,grain growth kinetics, | en |
| dc.relation.page | 121 | |
| dc.identifier.doi | 10.6342/NTU201901471 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2019-07-15 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
| Appears in Collections: | 材料科學與工程學系 | |
Files in This Item:
| File | Size | Format | |
|---|---|---|---|
| ntu-108-1.pdf Restricted Access | 6.91 MB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.