請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73011
標題: | 具小光點之微懸臂感測系統之設計與開發 Design and Development of a Cantilever Detection System with a Small Laser Spot Size |
作者: | Yi-Cheng Shiu 許逸誠 |
指導教授: | 廖先順 |
關鍵字: | 微懸臂,光偏折,像散,刀緣法,靈敏度, Cantilever,Beam deflection,Astigmatism,Knife-edge method,Sensitivity, |
出版年 : | 2019 |
學位: | 碩士 |
摘要: | 原子力顯微鏡為一廣泛被使用之高解析度顯微技術,其擷取一張影像所耗費之時間通常在數分鐘以上。為了觀測各種動態現象,近年許多研究致力於高速原子力顯微鏡之開發,其中縮小微懸臂之尺寸為一提升量測頻寬之關鍵。然而,量測超小型微懸臂需要客製化之光偏折光路系統,其缺點為光路複雜以及體積大。本論文設計開發一具小光點之微懸臂感測系統,其模組化的設計具有體積小(25.5 × 25 × 48.5 mm3)、方便更換光學元件等優點。此外,可透過加裝一平凸柱面透鏡切換光偏折式及像散式兩種量測原理。實驗利用刀緣法量測聚焦光點尺寸,結果顯示微懸臂感測系統之光點直徑小於5 μm,可應用於量測超小型微懸臂。 Atomic force microscope (AFM) is a widely used high-resolution imagining technique, which takes several minutes to obtain one image. To observe dynamic phenomena, many studies devoted to develop the high-speed AFM in recent years. The results indicate that reducing the cantilever size is a key to increase the measurement bandwidth. However, to measure the ultra-small cantilever is required a customized beam-deflection optical system, which increases the optical complication and the size. In this thesis, a cantilever detection system with a small laser spot size was developed. The modular design has the advantages of the compact size (25.5 × 25 × 48.5 mm3) and easy replacement for optical components. Moreover, the beam-deflection and astigmatic methods can be switched through adding a cylindrical lens. In the experiment, the knife-edge method was utilized to measure the laser spot size. The results shows that the spot diameter of the cantilever detection system is less than 5 μm and fits the sized of ultra-small cantilevers. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73011 |
DOI: | 10.6342/NTU201901155 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 5.15 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。