請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/72813
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 詹瑜璋(Yu-Chang Chan) | |
dc.contributor.author | Cheng-Wei Sun | en |
dc.contributor.author | 孫正瑋 | zh_TW |
dc.date.accessioned | 2021-06-17T07:06:56Z | - |
dc.date.available | 2019-07-31 | |
dc.date.copyright | 2019-07-31 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-07-24 | |
dc.identifier.citation | Banzi, M., & Shiloh, M. (2014). Getting started with Arduino: the open source electronics prototyping platform: Maker Media, Inc.
Burrough, P. A., McDonnell, R., McDonnell, R. A., & Lloyd, C. D. (1998). Principles of geographical information systems: Oxford university press. Chan, Y.-C., Chen, Y.-G., Shih, T.-Y., & Huang, C. (2007). Characterizing the Hsincheng active fault in northern Taiwan using airborne LiDAR data: Detailed geomorphic features and their structural implications. Journal of Asian Earth Sciences, 31(3), 303-316. Chang, K.-J., Taboada, A., & Chan, Y.-C. (2005). Geological and morphological study of the Jiufengershan landslide triggered by the Chi-Chi Taiwan earthquake. Geomorphology, 71(3-4), 293-309. Coe, A. L. (2010). Geological field techniques: John Wiley & Sons. D’Ausilio, A. (2012). Arduino: A low-cost multipurpose lab equipment. Behavior research methods, 44(2), 305-313. Haeussler, P. J., Yount, J. C., & Wells, R. E. (1999). Preliminary Geologic Map of the Uncas 7.5'Quadrangle, Callam and Jefferson Counties, Washington (2331-1258). Haugerud, R. A., Harding, D. J., Johnson, S. Y., Harless, J. L., Weaver, C. S., & Sherrod, B. L. (2003). High-resolution lidar topography of the Puget Lowland, Washington. GSA Today, 13(6), 4-10. Hsieh, Y.-C., Chan, Y.-C., Hu, J.-C., Chen, Y.-Z., Chen, R.-F., & Chen, M.-M. (2016). Direct measurements of bedrock incision rates on the surface of a large dip-slope landslide by multi-period airborne laser scanning DEMs. Remote Sensing, 8(11), 900. Lee, S.-J., Chan, Y.-C., Komatitsch, D., Huang, B.-S., & Tromp, J. (2009). Effects of realistic surface topography on seismic ground motion in the Yangminshan region of Taiwan based upon the spectral-element method and LiDAR DTM. Bulletin of the Seismological Society of America, 99(2A), 681-693 Tabor, R., Booth, D., & Troost, K. (2014). Lidar-Revised Geologic Map of the Poverty Bay 7.5’Quadrangle, King and Pierce Counties, Washington. Geology, 1, 1.. Tabor, R. W., Haeussler, P. J., Haugerud, R. A., & Wells, R. E. (2011). Lidar-revised Geologic Map of the Uncas 7.5'Quadrangle, Clallam and Jefferson Counties, Washington: US Department of the Interior, US Geological Survey. Yeh, C.-H., Chan, Y.-C., Chang, K.-J., Lin, M.-L., & Hsieh, Y.-C. (2014). Derivation of Strike and Dip in Sedimentary Terrain Using 3D Image Interpretation Based on Airborne LiDAR Data. Terrestrial, Atmospheric & Oceanic Sciences, 25(6). Yeh, C.-H., Lin, M.-L., Chan, Y.-C., Chang, K.-J., & Hsieh, Y.-C. (2017). Dip-slope mapping of sedimentary terrain using polygon auto-tracing and airborne LiDAR topographic data. Engineering geology, 222, 236-249. 大江二郎(1931)。李崠山圖幅說明書。東京:臺灣總督府殖產局。 中央研究院地球科學研究所、財團法人工業技術研究院、中興測量有限公司、經濟部中央地質調查所(2007)。大台北地區特殊地質災害調查與監測:高精度空載雷射掃描(LIDAR)地形測製與構造地形分析(3/3)。新北市:經濟部中央地質調查所。 市川雄一(1929)。臺灣煤田之地層研究。地質學雜誌,第36期。 市川雄一(1930)。臺北圖幅說明書。東京:臺灣總督府殖產局。 市川雄一(1931)。桃園圖幅說明書。東京:臺灣總督府殖產局。 市川雄一(1934)。頭圍圖幅說明書。東京:臺灣總督府殖產局。 何心瑜、史天元(2007)。空載光達作業及品管流程之研究。Journal of Photogrammetry and Remote Sensing,第12-2期。 何春蓀(1986)。臺灣地質概論-臺灣地質圖說明書。新北市:經濟部中央地質調查所。 邱家宏(2018)。應用高精度數值地形精進臺北地區褶皺逆衝帶地質圖。國立臺灣大學地質科學系暨研究所,台北市。 施乃慈(2018)。在三維環境中繪製高解析度地質圖:以臺灣北部雙溪地質圖幅為例。國立臺灣大學地質科學系暨研究所,台北市。 陳文山(1989)。東北角漸新統岩層再探討。地質,第9卷,第1期。 陳柔妃、詹瑜璋、張國楨、謝有忠. (2016). 應用空載光達數值地形模型於基隆河之河流地形研究. Journal of Photogrammetry and Remote Sensing, 21(1). 黃鍵水、李錦發(1992)。雪山山脈眉溪砂岩之地層沉積環境及其與四稜砂岩之關係。經濟部中央地質調查所特刊,第六號。 黃鐘、詹瑜璋、史天元、李建成、胡植慶、陳于高(2004)。空載雷射掃描數值高程模型簡介。地質,第23卷。第1期。 黃鑑水、何信昌(1989)。頭城 [臺灣地質圖幅及說明書1/50,000]。新北市:經濟部中央地質調查所。 黃鑑水、劉桓吉(1988)。雙溪 [臺灣地質圖幅及說明書1/50,000]。新北市:經濟部中央地質調查所。 詹瑜璋(2005)。見樹又見地—雷射測距掃描。科學發展月刊,390期。 詹瑜璋(2012)。空載光達技術完美刻畫大屯火山群地形。地質,第31卷,第1期。 詹瑜璋、張國楨、陳柔妃. (2012)。空載光達精準判釋海岸山脈中段構造地形。地質,第31卷,第2期。 詹瑜璋、張國楨、陳柔妃、劉進金. (2012)。空載光達資料顯示之莫拉克風災前後高精度地形變化。西太平洋地質科學,第12卷,第1期。 詹瑜璋、陳于高、史天元(2003)。利用空載雷射掃描資料分析新城斷層系統:清晰之地形與其代表之構造作用。中國地質學會九十二年年會暨學術研討會論文集。 顏滄波、陳培源(1953a)。五萬分之一臺灣地質圖說明書: 第十號瑞芳幅。臺北市:臺灣省地質調查所。 顏滄波、陳培源(1953b)。五萬分之一臺灣地質圖說明書: 第九號臺北幅 。臺北市:臺灣省地質調查所。 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/72813 | - |
dc.description.abstract | 地質圖與區域地質剖面為了解區域地質架構的重要基礎資料,然而陡峭地形、濃密植被等因素限制了地質調查時在野外直接量測的地質證據。臺灣相關部門自2005年以來開始以光達測繪獲得高解析度數值地形模型已逐漸完備,電腦軟體三維環境顯示與編修技術逐漸成熟,前人研究在臺灣西部麓山帶以光達精進地質圖已獲良好結果,本研究在前述基礎上,於頭城地質圖幅內,對雪山山脈漸新世至中新世輕度變質岩地層,以室內地形學判釋與野外查核,並參考前人於此地區之研究,進行地質製圖。判釋過程中,我們以高解析度地形與其衍生之陰影圖、坡度圖等於軟體三維環境下,觀察不同光源、視角下地形特徵,進行層理面之判釋,並根據繪圖尺度由大而小標示區域參考線、層理特徵線,最後是斷層系統。過程中以自製之可程式化人機介面裝置-連點君輔助製圖,可大幅提昇標記密度與製圖效率。根據標記得出的兩千六百餘條層理特徵線與野外查核資料,本研究繪製頭城圖幅五萬分之一地質圖一張,區域構造為一北陡南緩之鶯仔瀨向斜,斷層系統則有區分西部麓山帶地層與雪山山脈地層之屈尺斷層、重新定位後金瓜寮斷層與三叉坑斷層、枋腳斷層重新解釋為切穿鶯仔瀨向斜軸部之背衝斷層、研究區域南側提出大金面山正斷層系統,分為蕃薯寮、外澳-福德坑、四堵-石牌-金面山等三大區塊。本研究成功克服上述不利於傳統地質工作的限制,為難以抵達的區域獲得了更詳細的地質證據與區域構造解釋,提供未來地質研究等各項用途的重要參考資料。 | zh_TW |
dc.description.abstract | Geologic map and regional geologic cross-section are the important base map to understand the local geologic conditions. In the past, however, geologists could collect very limited field data due to the heavy vegetation, steep terrain, human activity, etc. The previous studies used LiDAR-based high-resolution DEM to interpret geomorphic features and improved the geologic map in the fold and thrust belts in northern Taiwan. In this study, we focus on the low-grade metamorphism area in Toucheng, northern Taiwan. The age of the formations is from Oligocene to Miocene and lithology contains quartzite, argillite, shale, sandstone and their alternations. We overlay the pseudocolored DEM, hillshade and slope layers in the 3D GIS environment, where we can not only adjust view angle and illumination but also mark geomorphic features directly. In the mapping stage, a custom-built human interface device, Liandianjun, can improve the mapping efficiency. We first identify the regional structure reference lines and then map the feature lines of bedding carefully. Finally, fault lineaments are determined based on the different attitudes between the two walls. With 2600 feature lines of bedding and field verification, we finish the 1:50000 Toucheng geologic map. One fold and five major faults are in the study area. Yingzilai syncline is an asymmetric fold where beddings in the north are steeper than the south ones. The location of Jingualiao fault and Sanchakeng are modified based on geomorphic evidence. Fangjiao fault is reinterpreted as a back-thrust fault that cut the north limb of Yingzilai syncline. The Dajinmianshan normal fault system is introduced for the first time in the southern study area. It can be further divided into three regions: Fanshuliao region, Wai’ao-Fudekeng region and Sidu-Shipai- Jinmianshan region. We have successfully concurred the difficulties of the traditional geologic mapping work and provided detailed geologic information in the metamorphic area. The map can be used as the base map of future research in this area. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T07:06:56Z (GMT). No. of bitstreams: 1 ntu-108-R05224123-1.pdf: 26156329 bytes, checksum: 6908bf8282eaec102b136944ab599e77 (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 口試委員會審定書 ii
誌謝 iii 中文摘要 iv Abstract v 目錄 vii 圖目錄 xiii 表目錄 xvii 第一章、前言與研究動機 1 第二章、前人文獻回顧 5 2.1空載光達技術介紹 5 2.2 LiDAR地形精進地質圖 6 2.3研究區域地質架構 10 2.3.1地層 10 2.3.2構造 14 2.3.3區域地史 15 第三章、方法論 16 3.1 高解析度數值地形圖 16 3.2衍生圖層 18 日照陰影圖(Hillshade)與坡度圖(Slope) 18 3.3 數值三維環境建構: 20 3.4地質構造判釋流程: 21 區域參考線繪製 22 細部特徵線繪製 22 斷層線型繪製 24 地層邊界繪製 24 3.5 自製可程式化人性化介面裝置- 連點君二代 26 3.6構造面位態計算 31 3.7 電腦硬體 32 第四章、製圖結果與野外調查 35 4.1 區域地質圖與主要構造 35 4.1.1屈尺斷層 39 4.1.2金瓜寮斷層 40 4.1.3 三叉坑斷層 40 4.1.4 枋腳斷層 40 4.1.5 鶯仔瀨向斜 40 4.1.6 大金面山正斷層系統 45 野外調查 49 4.2 金瓜寮斷層附近與豹子廚、楣子寮、鷺鷥岫野外調查 49 4.3 宜一線沿線野外調查 54 4.4北宜公路四堵至二城沿線野外調查 57 第五章、討論 61 5.1 連點君輔助製圖 61 5.1.1效率比較 61 5.1.2 定距標記模式下不同螢幕比例尺之標記距離比較 65 5.2 地層單位界線與地層地形特徵 67 5.2.1 澳底層枋腳段與媽崗段 67 5.2.2 澳底層與大桶山層 67 5.2.3 大桶山層、粗窟層與乾溝層邊界 67 5.2.4 乾溝層與四稜砂岩 70 5.3 地質圖與前人製圖結果比較 71 5.3.1 岩層層厚與文獻對比 71 5.3.2 製圖結果與前人地質圖比較 72 5.4製圖問題討論 93 5.4.1 變質岩區多重構造線型混淆 93 5.4.2 海蝕平台 93 5.4.3 人為開發 94 5.5 未來補充調查的區域 98 第六章、結論 100 參考文獻 101 附圖一、野外查核點地圖(西北) 106 附圖二、野外查核點地圖(西南) 107 附表一、野外查核位態測量結果總表。走向順時鐘加90度為傾角方向。 108 附表二、本研究與前人地質圖地層圖例總表 111 數位附錄 112 數位附錄1、五萬分之一頭城地質圖 112 數位附錄2、野外工作照片 112 數位附錄3、各特徵線計算之位態結果表格 112 數位附錄4、各構造附近地形與特徵線展示影片 112 數位附錄4-1、屈尺斷層與金瓜寮斷層附近地形與判釋結果展示影片112 數位附錄4-2、三叉坑斷層附近地形與判釋結果展示影片 112 數位附錄4-3、枋腳斷層與鶯仔瀨向斜(東北向西南)附近地形與判釋結果展示影片 112 數位附錄4-4、枋腳斷層與鶯仔瀨向斜(西南向東北)附近地形與判釋結果展示影片 112 數位附錄4-5、金面山正斷層系統(蕃薯寮)附近地形與判釋結果展示影片 112 數位附錄4-6、大金面山正斷層系統(外澳)附近地形與判釋結果展示影片 112 數位附錄4-7、大金面山正斷層系統(石牌)附近地形與判釋結果展示影片 112 數位附錄4-8、石門-內大溪-灣潭-下洞地層判釋結果展示影片 112 數位附錄4-9、研究區域邊界沿線判釋結果展示影片 112 數位附錄4-10、變質岩區多重線型干擾示意影片 112 數位附錄5、特徵線、地層分界線、斷層線與褶皺軸位置地理資料庫 112 | |
dc.language.iso | zh-TW | |
dc.title | 應用高解析度數值地形模型精進輕度變質岩區地質圖-以頭城地質圖幅為例 | zh_TW |
dc.title | Using high resolution DEM to improve the geologic map in low-grade metamorphism area – a case study in Toucheng Map | en |
dc.type | Thesis | |
dc.date.schoolyear | 107-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 胡植慶(Jyr-Ching Hu) | |
dc.contributor.oralexamcommittee | 劉桓吉(Huan-chi Liu),董家鈞(Jia-Jyun Dong),孫荔珍(Li-Jan Sun) | |
dc.subject.keyword | 三維地質製圖,地質圖,高解析度數值地形,頭城,雪山山脈,變質岩區, | zh_TW |
dc.subject.keyword | Geologic map,Geomorphic mapping in 3D environment,Hsuehshan Range,High-resolution digital elevation model,Metamorphism rock,Toucheng, | en |
dc.relation.page | 112 | |
dc.identifier.doi | 10.6342/NTU201901740 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2019-07-25 | |
dc.contributor.author-college | 理學院 | zh_TW |
dc.contributor.author-dept | 地質科學研究所 | zh_TW |
顯示於系所單位: | 地質科學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 25.54 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。