請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/72427
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 鄭如忠(Ru-Jong Jeng) | |
dc.contributor.author | Ya-Chin Huang | en |
dc.contributor.author | 黃雅琴 | zh_TW |
dc.date.accessioned | 2021-06-17T06:41:55Z | - |
dc.date.available | 2023-08-21 | |
dc.date.copyright | 2018-08-21 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-08-15 | |
dc.identifier.citation | 1. Vathke‐Ernst, H.; Hoffmann, H., Cycloadditions of Allyl Cations, 261) Norbornene Derivatives from Cyclopentadiene and 2, 4‐Dimethyl‐3‐penten‐2‐ol in an Acidic Two Phase System. A Stepwise Diels‐Alder‐like Cyclization. Chemische Berichte 1981, 114 (4), 1464-1475.
2. Dinda, M.; Chakraborty, S.; Si, M. K.; Samanta, S.; Ganguly, B.; Maiti, S.; Ghosh, P. K., Solar driven uphill conversion of dicyclopentadiene to cyclopentadiene: an important synthon for energy systems and fine chemicals. RSC Advances 2014, 4 (97), 54558-54564. 3. Hsiao, S. H.; Li, C. T., Synthesis and characterization of new adamantane‐based cardo polyamides. Journal of Polymer Science Part A: Polymer Chemistry 1999, 37 (10), 1435-1442. 4. Korshak, V. V.; Vinogradova, S. V.; Vygodskii, Y. S., Cardo polymers. 1974. 5. Wang, X.; Liu, F.; Lai, J.; Fu, Z.; You, X., Comparative investigations on the effects of pendent trifluoromethyl group to the properties of the polyimides containing diphenyl-substituted cyclopentyl Cardo-structure. Journal of Fluorine Chemistry 2014, 164, 27-37. 6. Zhiqiang Hu, S. L., Chunhua Zhang, Synthesis and Properties of Polyamide–imides Containing Fluorenyl Cardo Structure. Journal of applied polymer science 2007, 106 (4), 2494-2501. 7. Guo, D. D.; Sheng, S. R.; Mao, X. C.; Liu, X. L.; Jiang, J. W., New poly(ether benzoxazole)s containing xanthene cardo groups. High Perform Polym 2016, 28 (3), 309-314. 8. Papava, G. S.; Maisuradze, N.; Zarkua, Z.; Dokhturishvili, N.; Sarishvili, Z.; Razmadze, G.; Vinogradova, S.; Korshak, V., Synthesis and study of diols containing bisphenol fragments and of polymers produced on their basis. Acta polymerica 1988, 39 (8), 445-448. 9. Yang, C. P.; Chen, R. S.; Yu, C. W., Preparation and characterization of organosoluble polyimides based on 1, 1‐bis [4‐(3, 4‐aminophenoxy) phenyl] cyclohexane and commercial aromatic dianhydrides. Journal of applied polymer science 2001, 82 (11), 2750-2759. 10. Dai, S.; Lin, C.; Rao, D.; Stuber, F.; Carleton, P.; Ulrich, H., Selective indirect oxidation of phenol to hydroquinone and catechol. Journal of organic chemistry 1985, 50 (10), 1722-1725. 11. S Patil, L.; S Suryawanshi, V.; B Pawar, O.; D Shinde, N., An Improved, Highly Efficient Method for the Synthesis of Bisphenols. Journal of Chemistry 2011, 8 (4), 2016-2019. 12. Johnstin, P. M. H. a. N. J., ACS Symp.Ser132 1980, DC 3 13. D. Wilson, H. D. S. a. P. M. H., Polyimides Blackie & Son,London 1 1990. 14. N. A. Adrova, M. I. B., L. A. Laius and A. P. Rudakov, Polyimide:A new class of thermally stable polymers(in Russian), Nauka, Leningrad1 1968. 15. 李伯毅, 正型鹼性水溶液顯影感光性聚亞醯胺材料之研究 國立成功大學化工研究所碩士論文 2002. 16. Kirk-Othmer, Encyclopedia of Chemical Technology, New York : Wiley 1991, 19. 17. Mittal, M. K. G. a. K. L., Polyimides: Fundamentals and Applications, New York:Dekker 1996. 18. Takekoshi, T., Polyimides. In New Polymer Materials, Springer: 1990; pp 1-25. 19. 魏大欽, 胡., 21世紀的新森林—氣體分離薄膜. 科學發展 2008, 429, 32-37. 20. Baker, R. W.; Cussler, E.; Eykamp, W.; Koros, W.; Riley, R., Membrane separation system: Recent developments and future directions. Noyes Data Corporation, Park Ridge, NJ. 1991. 451 1991. 21. Lilov, S., Determination of the effective kinetic diameter of the complex molecules. Crystal Research and Technology 1986, 21 (10), 1299-1302. 22. Ma, X.; Swaidan, R.; Belmabkhout, Y.; Zhu, Y.; Litwiller, E.; Jouiad, M.; Pinnau, I.; Han, Y., Synthesis and gas transport properties of hydroxyl-functionalized polyimides with intrinsic microporosity. Macromolecules 2012, 45 (9), 3841-3849. 23. Li, S.; Jo, H. J.; Han, S. H.; Park, C. H.; Kim, S.; Budd, P. M.; Lee, Y. M., Mechanically robust thermally rearranged (TR) polymer membranes with spirobisindane for gas separation. Journal of membrane science 2013, 434, 137-147. 24. Yen, H.-J.; Wu, J.-H.; Huang, Y.-H.; Wang, W.-C.; Lee, K.-R.; Liou, G.-S., Novel thermally stable and soluble triarylamine functionalized polyimides for gas separation. Polymer Chemistry 2014. 25. Wu, C.-Y.; Hu, C.-C.; Lin, L.-K.; Lai, J.-Y.; Liu, Y.-L., Liberation of small molecules in polyimide membrane formation: an effect on gas separation properties. Journal of Membrane Science 2016, 499, 20-27. 26. Weber, E.; Helbig, C.; Seichter, W.; Czugler, M., A new functional cyclophane host. Synthesis, complex formation and crystal structures of three inclusion compounds. Journal of inclusion phenomena and macrocyclic chemistry 2002, 43 (3), 239-246. 27. Parsania, P.; Shah, P.; Patel, K.; Patel, R., Synthesis and characterization of the poly-(2-methoxycyanurate) of 1, 1′-bis-(4-hydroxyphenyl)-cyclohexane. Journal of Macromolecular Science—Chemistry 1985, 22 (11), 1495-1508. 28. Lee, D. H.; Koo, S. Y.; Lee, H. S.; Kim, W. S.; Min, K. E.; Park, L. S.; Seo, K. H.; Kang, I. K.; Choi, H. J., Preparation and properties of aromatic polyimides based on 4, 4′‐(2, 2, 2‐trifluoro‐1‐phenylethylidene) diphthalic anhydride. Journal of applied polymer science 2002, 85 (1), 38-44. 29. Wu, S. Y.; Yuen, S. M.; Ma, C. C. M.; Huang, Y. L., Synthesis and properties of aromatic polyimide, poly (benzoxazole imide), and poly (benzoxazole amide imide). Journal of applied polymer science 2009, 113 (4), 2301-2312. 30. Park, H. B.; Han, S. H.; Jung, C. H.; Lee, Y. M.; Hill, A. J., Thermally rearranged (TR) polymer membranes for CO2 separation. Journal of Membrane Science 2010, 359 (1-2), 11-24. 31. Ma, X.; Salinas, O.; Litwiller, E.; Pinnau, I., Pristine and thermally-rearranged gas separation membranes from novel o-hydroxyl-functionalized spirobifluorene-based polyimides. Polymer Chemistry 2014, 5 (24), 6914-6922. 32. Guo, R.; Sanders, D. F.; Smith, Z. P.; Freeman, B. D.; Paul, D. R.; McGrath, J. E., Synthesis and characterization of thermally rearranged (TR) polymers: influence of ortho-positioned functional groups of polyimide precursors on TR process and gas transport properties. Journal of Materials Chemistry A 2013, 1 (2), 262-272. 33. Tena, A.; Rangou, S.; Shishatskiy, S.; Filiz, V.; Abetz, V., Claisen thermally rearranged (CTR) polymers. Science advances 2016, 2 (7), e1501859. 34. Jung, C. H.; Lee, Y. M., Gas permeation properties of hydroxyl-group containing polyimide membranes. Macromolecular research 2008, 16 (6), 555-560. 35. Robeson, L. M., The upper bound revisited. Journal of Membrane Science 2008, 320 (1-2), 390-400. 36. Yen, H.-J.; Wu, J.-H.; Huang, Y.-H.; Wang, W.-C.; Lee, K.-R.; Liou, G.-S., Novel thermally stable and soluble triarylamine functionalized polyimides for gas separation. Polymer Chemistry 2014, 5 (14), 4219-4226. 37. Sanders, D. F.; Smith, Z. P.; Guo, R.; Robeson, L. M.; McGrath, J. E.; Paul, D. R.; Freeman, B. D., Energy-efficient polymeric gas separation membranes for a sustainable future: a review. Polymer 2013, 54 (18), 4729-4761. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/72427 | - |
dc.description.abstract | 本論文由石油烴高溫裂解製造乙烯過程中副産之五碳烯烴餾分-雙環戊二烯(dicyclopentadiene, DCPD)出發,成功開發出含cardo 結構之二胺單體,並聚合為高分子聚合物。由dicyclopentadiene降解後的中間產物cyclopentadiene (CPD)進行烷基化及觸媒異構化後可進一步形成具有單一反應位置之4-cyclopentenyl phenol (CPP)利用苯酚將其再次烷基化後可得到具有cardo結構之雙酚中間體(CPDP),透過使用觸媒與烷基化等工業化學反應,改善過去以環戊酮為原料的路徑,反應條件相對較為溫和且可縮短反應時間。利用CPDP與對氟硝基苯或5-氟-2-硝基苯酚反應,並再進行進一步氫化後,可得到含cardo結構之二胺單體C1或同時含cardo結構及鄰位羥基之二胺單體C2,再將C1或C2分別搭配不同之二酸酐單體,合成一系列具cardo結構之聚醯胺酸(cardo polyamic acid, CPAA),最後使用直接加熱法將CPAA醯亞胺化並製成聚醯亞胺薄膜(cardo polyimides, CPIs),而由C2及4,4'-(Hexafluoroisopropylidene)diphthalic anhydride (6FDA)聚合而成的CPI-4,會因在醯亞胺基團的鄰位含有羥基,可進一步進行熱重排反應,轉變為聚苯噁唑(polybenzoxazole, PBO)。
本研究合成之含cardo結構CPIs具有優異熱性質,其玻璃轉移溫度(glass transition temperature, Tg)落於244-313℃間。此外,由TGA觀察到CPI-4之熱重排發生於315-360 ℃間,其餘CPIs之熱裂解溫度皆在450℃以上,展現極佳熱穩定性。具有五碳環狀cardo側鏈的CPIs,經由WAXD證實導入cardo側鏈結構可幫助減少高分子鏈段分子間堆疊,故相較於傳統之芳香族聚醯亞胺,CPIs具有較佳的有機溶劑溶解度。同時,也在氣體滲透率分析儀(GPA)觀察到由C1 及6FDA聚合而成的CPI-3擁有相較於市售聚醯亞胺更高的氣體滲透率,且CO2/CH4達46,更具應用於二氧化碳分離程序之發展潛力。 | zh_TW |
dc.description.abstract | This study started from dicyclopentadiene (DCPD), one of by-products when producing ethylene by the distillation of petroleum hydrocarbons, to synthesize novel cyclopentyl cardo-structure containing diaime monomers and their corresponding cardo polyimides. A cardo-structure containing diol intermediate, CPDP, was prepared through alkylation of 4-cyclopentenyl phenol (CPP) possessing a single reaction site. CPP was synthesized from cyclopentadiene (CPD), through heat degradation of DCPD, and followed by alkylation and isomerization. This intermediate was obtained from alkylation or addition reactions. With the raw materials from commodity chemicals, this research obtained milder reaction conditions and shorter reaction time. The cardo-structure containing diamine monomer (C1) and the one with ortho-hydroxyl group (C2) or without (C1) were further synthesized from CPDP with 4-Fluoronitrobenzene or 5-Fluoro-2-nitrophenol and followed by hydrogenation. The corresponding cardo polyimides (CPIs) was prepared from C1 and C2 with commercial dianhydrides. Moreover, CPI-4, prepared from C2 and 6FDA will occur an imide-to-benzoxazole thermal rearrangement (TR) because of the present of ortho-positioned hydroxyl group on the carbonyl group of imide ring and accompanied by decarboxylation.
CPIs exhibited good thermal properties with glass transition temperature (Tg) of 244-313 ℃ and no weight loss below 450 ℃except for CPI-4. TGA showed that a decarboxylation (corresponding to TR) of CPI-4 was induced in the temperature range 315-360 ℃. In addition, comparing with conventional aromatic polyimide, CPIs exhibited higher solubility due to the inhibiting molecular packing by introducing cardo structure. This results were evidenced by the investigations of WAXD. In GPA, CPI-3, prepared from C1 and 6FDA, exhibited higher gas permeability than the commercially available polyimides with a CO2/CH4 selectivity of 46 that had more potential to be applied in CO2 capture | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T06:41:55Z (GMT). No. of bitstreams: 1 ntu-107-R05549016-1.pdf: 6281939 bytes, checksum: e980cdf7cfc4bf76a367a2f4594551cb (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 誌謝 I
摘要 II Abstract III 目錄 V 圖目錄 VIII 表目錄 XI 壹、緒論 1 貳、文獻回顧 2 2.1 五碳在化學工業之應用 2 2.1.1 異戊二烯(Isoprene, IP) 2 2.1.2 間戊二烯 (PIP) 3 2.1.3 環戊二烯 (CPD) 3 2.1.4 雙環戊二烯 (DCPD) 5 2.2 Cardo結構介紹及在高分子上之應用 6 2.3 反應中間體製備 13 2.4 聚醯亞胺簡介 15 2.5 聚醯亞胺之合成 17 2.5.1 縮合型(Condensation type)聚醯亞胺 17 2.5.2 加成型(Addition type)聚醯亞胺 19 2.5.3 改質型(Modification type)聚亞醯胺 20 2.6 氣體分離薄膜 21 2.6.1 努森擴散機制(Knudsen-diffusion) 21 2.6.2 分子篩機制(Molecular sieving) 22 2.6.3 溶解-擴散機制(Solution-diffusion) 23 2.6.4 高分子薄膜 23 2.7 研究動機 26 參、實驗內容 28 3.1 藥品及溶劑 28 3.2 實驗儀器 31 3.3 實驗規劃 33 3.4 單體合成步驟 35 3.4.1 反應前驅物CPP製備 35 3.4.2 含cardo結構之雙苯酚中間體 (CPDP)製備 36 3.4.3 由CPDP合成二胺單體 37 3.4.3.1 含cardo結構之雙硝基中間體 (CPDN)製備 37 3.4.3.2 含cardo結構之二胺單體 (C1)製備 38 3.4.3.3 含羥基及cardo結構之雙硝基中間體 (CPDON)製備 38 3.4.3.4 含羥基及cardo結構之二胺單體 (C2)製備 39 3.5 聚醯亞胺薄膜製備 40 3.5.1 CPI-1之製備 40 3.5.2 CPI-2之製備 40 3.5.3 CPI-3之製備 41 3.5.4 CPI-4之製備 41 肆、結果與討論 42 4.1 單體合成之分析及鑑定 42 4.1.1 反應前驅物CPP分析與鑑定 42 4.1.2 含cardo結構之雙苯酚中間體 (CPDP)分析與鑑定 45 4.1.3 含cardo結構之雙硝基中間體 (CPDN)分析與鑑定 46 4.1.4 含cardo結構之二胺單體 (C1)分析與鑑定 47 4.1.5 含羥基及cardo結構之雙硝基中間體 (CPDON)分析與鑑定 48 4.1.6 含羥基及cardo結構之二胺單體 (C2)分析與鑑定 49 4.2 聚醯亞胺合成之分析與鑑定 50 4.2.1 聚醯亞胺之FT-IR光譜分析 51 4.2.2 聚醯亞胺之溶解度分析 52 4.2.3 聚醯亞胺之熱性質分析 54 3.4.3.5 熱重分析 (Thermogravimetric analysis,TGA) 54 3.4.3.6 差示掃描量熱儀(Differential scanning calorimetry, DSC) 56 4.3 聚醯亞胺之氣體分離薄膜應用分析 57 4.3.1 聚醯亞胺之廣角X光繞射圖譜分析(wide angle X-ray diffraction, WAXD) 57 4.3.2 聚醯亞胺之氣體分離性質分析 59 伍、結論 62 陸、參考文獻 63 | |
dc.language.iso | zh-TW | |
dc.title | 合成五碳環中間體應用於聚醯亞胺氣體分離薄膜 | zh_TW |
dc.title | Synthesis of Cycloaliphatic Cardo-type Intermediates and polyimide with gas separation membranes | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 戴憲弘(Shenghong A. Dai),劉英麟(Ying-Ling Liu),林慶炫(Ching-Hsuan Lin),蘇文?(Wen-Chiung Su) | |
dc.subject.keyword | 雙環戊二烯;聚醯亞胺;氣體分離, | zh_TW |
dc.subject.keyword | dicyclopentadiene;polyimide;gas separation, | en |
dc.relation.page | 65 | |
dc.identifier.doi | 10.6342/NTU201802351 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2018-08-15 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 高分子科學與工程學研究所 | zh_TW |
顯示於系所單位: | 高分子科學與工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-1.pdf 目前未授權公開取用 | 6.13 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。