請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/71159完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 劉建豪 | |
| dc.contributor.author | Chien-Chang Huang | en |
| dc.contributor.author | 黃建璋 | zh_TW |
| dc.date.accessioned | 2021-06-17T04:56:06Z | - |
| dc.date.available | 2021-08-06 | |
| dc.date.copyright | 2018-08-06 | |
| dc.date.issued | 2018 | |
| dc.date.submitted | 2018-07-27 | |
| dc.identifier.citation | [1] S. S. Haykin and J. H. Justice, Array signal processing. Englewood Cliffs, N.J. : Prentice-Hall, 1985.
[2] B. Grothe, M. Pecka, and D. McAlpine, “Mechanisms of sound localization in mammals,” Physiol. Rev., vol. 90, no. 3, pp. 983–1012, Jul. 2010. [3] D. Young and K. G. Hill, “Structure and function of the auditory system of the Cicada, Cystosoma saundersii,” J. Comp. Physiol., vol. 117, pp. 23–45, Dec. 1977. [4] U. Kohler, R. Lakes-Harlan, 'Auditory behavior of a parasitoid fly (Emblemasoma Auditrix Sarcophagidae Diptera)', J. Comp. Physiol., vol. 187, pp. 581-587, 2001. [5] H. H. Jenkins, Small-aperture Radio Direction-finding. Artech House, 1991. [6] W. Cade, “Acoustically Orienting Parasitoids: Fly Phonotaxis to Cricket Song,” Science, vol. 190, no. 4221, pp. 1312–1313, Dec. 1975. [7] R. N. Miles, D. Robert, and R. R. Hoy, “Mechanically coupled ears for directional hearing in the parasitoid fly Ormia ochracea,” J. Acoust. Soc. Am., vol. 98, no. 6, pp. 3059–3070, Dec. 1995. [8] R. Miles, R. Hoy, 'The development of a biologically-inspired directional microphone for hearing aids', Audiol. Neurotol., vol. 11, no. 2, pp. 86-94, 2006. [9] A. Ishfaque and B. Kim, “Fly Ormia Ochracea Inspired MEMS Directional Microphone: A Review,” IEEE Sens. J., vol. 18, no. 5, pp. 1778–1789, Mar. 2018. [10] K. Yoo, C. Gibbons, Q. T. Su, R. N. Miles, and N. C. Tien, “Fabrication of biomimetic 3-D structured diaphragms,” Sens. Actuators Phys., vol. 97–98, pp. 448–456, Apr. 2002. [11] R. N. Miles et al., “A low-noise differential microphone inspired by the ears of the parasitoid fly Ormia ochracea,” J. Acoust. Soc. Am., vol. 125, no. 4, pp. 2013–2026, Apr. 2009. [12] R. N. Miles, T. D. Tieu, D. Robert, and R. R. Hoy, “A mechanical analysis of the novel ear of the parasitoid fly Ormia ochracea,” in Proc. Diversity Auditory Mech., Berkeley, CA, USA, Jun. 1996, pp. 18–24. [13] C. Gibbons and R. N. Miles, “Design of a biomimetic directional micro-phone diaphragm,” in Proc. Int. Mech. Eng. Congr. Expo. (IMECE), Orlando, FL, USA, Nov. 2000, pp. 173–179. [14] R. N. Miles, C. Gibbons, J. Gao, K. Yoo, Q. Su, and W. Cui, “A silicon nitride microphone diaphragm inspired by the ears of the parasitoid fly Ormia ochracea,” J. Acoust. Soc. Am., vol. 110, no. 5, pp. 2645–2645, Oct. 2001. [15] R. N. Miles et al., “Development of novel biologically inspired directional microphones,” J. Acoust. Soc. Am., vol. 120, no. 5, pp. 3158–3158, Oct. 2006. [16] W. Cui, B. Bicen, N. Hall, S. A. Jones, F. L. Degertekin, and R. N. Miles, “Optical Sensing Inadirectional Memsmicrophone Inspired by the Ears of the Parasitoid Fly, Ormia Ochracea,” in 19th IEEE International Conference on Micro Electro Mechanical Systems, 2006, pp. 614–617. [17] R. Miles, Q. Su, W. Cui, D. Homentcovschi, and N. Eva Wu, “Analysis and design of a MEMS (microelectromechanical system) directional microphone diaphragm with active Q control.,” J. Acoust. Soc. Am., vol. 127, p. 1944, Mar. 2010. [18] R. Miles, “Comparisons of the performance of Knowles hearing aid microphones to that of the Binghamton Ormia-inspired gradient microphone,” Binghamton Univ., Binghamton, NY, USA, Tech. Rep., 2015. [19] M. Touse, J. Sinibaldi, K. Simsek, J. Catterlin, S. Harrison, and G. Karunasiri, “Fabrication of a microelectromechanical directional sound sensor with electronic readout using comb fingers,” Appl. Phys. Lett., vol. 96, no. 17, p. 173701, Apr. 2010. [20] M. Touse, J. Sinibaldi, and G. Karunasiri, “MEMS directional sound sensor with simultaneous detection of two frequency bands,” in 2010 IEEE Sensors, 2010, pp. 2422–2425. [21] D. Wilmott, F. Alves, and G. Karunasiri, “Bio-Inspired Miniature Direction Finding Acoustic Sensor,” Sci. Rep., vol. 6, Jul. 2016. [22] D.T. Martin Design, Fabrication and Characterization of a MEMS Dual-backplate Capacitive Microphone, PhD. dissertation, University of Florida, USA 2007. [23] R. H. Downey and G. Karunasiri, “Reduced Residual Stress Curvature and Branched Comb Fingers Increase Sensitivity of MEMS Acoustic Sensor,” J. Microelectromechanical Syst., vol. 23, no. 2, pp. 417–423, Apr. 2014. [24] R. H. Downey, L. N. Brewer, and G. Karunasiri, “Determination of mechanical properties of a MEMS directional sound sensor using a nanoindenter,” Sens. Actuators Phys., vol. 191, pp. 27–33, Mar. 2013. [25] H. Liu, L. Currano, D. Gee, T. Helms, and M. Yu, “Understanding and mimicking the dual optimality of the fly ear,” Sci. Rep., vol. 3, p. 2489, Aug. 2013. [26] A. P. Lisiewski, H. Liu, and M. Yu, “Fly ear inspired miniature sound source localization sensor: Localization in two dimensions,” in Proc. Int. Mech. Eng. Congr. Expo. (IMECE), Vancouver, BC, Canada, Nov. 2010, pp. 339–344. [27] H. Liu, L. Currano, D. Gee, B. Yang, and M. Yu, “Fly-ear inspired acoustic sensors for gunshot localization,” Proc. SPIE, vol. 7321, p. 73210A, May 2009. [28] H. Liu, M. Yu, L. Currano, and D. Gee, “Fly-Ear Inspired Miniature Directional Microphones: Modeling and Experimental Study,” in ASME International Mechanical Engineering Congress and Exposition, Proceedings, 2009, vol. 12. [29] H. Liu and M. Yu, “A new approach to tackle noise issue in miniature directional microphones: bio-inspired mechanical coupling,” in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 7647, p. 76470P, 2010. [30] D. Gee, H. Liu, L. Currano, and M. Yu, “Enhanced directional sensitivity of a biomimetic MEMS acoustic localization sensor,” Proc. SPIE, vol. 7682, p. 76820N, Apr. 2010. [31] H. Liu, Z. Chen, and M. Yu, “Biology-inspired acoustic sensors for sound source localization,” Proc. SPIE, vol. 6932, p. 69322Y, Apr. 2008. [32] H. Liu and M. Yu, “Effects of air cavity on fly-ear inspired directional microphones: A numerical study,” Proc. SPIE, vol. 7981, p. 79811V, Apr. 2011. [33] M. L. Kuntzman, J. Gloria Lee, N. N. Hewa-Kasakarage, D. Kim, and N. A. Hall, “Micromachined piezoelectric microphones with in-plane directivity,” Appl. Phys. Lett., vol. 102, no. 5, p. 054109, Feb. 2013. [34] D. Kim, N. N. Hewa-Kasakarage, M. L. Kuntzman, K. D. Kirk, S. H. Yoon, and N. A. Hall, “Piezoelectric micromachined microphones with out-of-plane directivity,” Appl. Phys. Lett., vol. 103, no. 1, p. 013502, Jul. 2013. [35] M. L. Kuntzman and N. A. Hall, “Sound source localization inspired by the ears of the O rmia ochracea,” Appl. Phys. Lett., vol. 105, no. 3, p. 033701, Jul. 2014. [36] M. L. Kuntzman, N. N. Hewa-Kasakarage, A. Rocha, D. Kim, and N. A. Hall, “Micromachined In-Plane Pressure-Gradient Piezoelectric Microphones,” IEEE Sens. J., vol. 15, no. 3, pp. 1347–1357, Mar. 2015. [37] N. A. Hall, M. Kuntzman, and D. Kim, “A biologically inspired piezoelectric microphone,” J. Acoust. Soc. Am., vol. 141, no. 5, pp. 3794–3794, May 2017. [38] M. L. Kuntzman, N. N. Hewa-Kasakarage, D. Kim, A. Rocha, and N. A. Hall, “Design optimization of a piezoelectric microphone with in-plane directivity,” J. Acoust. Soc. Am., vol. 134, no. 5, pp. 4092–4092, Nov. 2013. [39] M. L. Kuntzman, D. Kim, N. N. Hewa-Kasakarage, K. D. Kirk, and N. A. Hall, “Network modeling of multiple-port, multiple-vibration-mode transducers and resonators,” Sens. Actuators Phys., vol. 201, pp. 93–100, Aug. 2013. [40] Y. Zhang, R. Bauer, J. F. C. Windmill, and D. Uttamchandani, “Multi-band asymmetric piezoelectric MEMS microphone inspired by the Ormia ochracea,” in 2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS), 2016, pp. 1114–1117. [41] A. Ishfaque and B. Kim, “Squeeze Film Damping Analysis of Biomimetic Micromachined Microphone for Sound Source Localization,” Sens. Actuators Phys., vol. 250, Sep. 2016. [42] M. Bao and H. Yang, “Squeeze film air damping in MEMS,” Sens. Actuators Phys., vol. 136, pp. 3–27, May 2007. [43] A. Ishfaque and B. Kim, “Analytical modeling of squeeze air film damping of biomimetic MEMS directional microphone,” J. Sound Vib., vol. 375, May 2016. [44] A. Ishfaque and B. Kim, “Design of centrally supported biomimetic MEMS microphone for acoustic source localization,” in Proc. Int. Mech. Eng. Congr. Expo. (IMECE), Houston, TX, USA, Nov. 2015, p. V010T13A025. [45] S. Han and B. Kim, “A parameter study of micromachined seesaw type microphone,” in Proc. Int. Mech. Eng. Congr. Expo. (IMECE), Montreal, QC, Canada, Nov. 2014, p. V010T13A059. [46] H. Xu, X. Xu, H. Jia, L. Guan, and M. Bao, “A biomimetic coupled circuit based microphone array for sound source localization,” J. Acoust. Soc. Am., vol. 138, no. 3, pp. EL270–EL275, Sep. 2015. [47] Y. Zhang, M. Yang, X. Zhu, N. Ta, and Z. Rao, “A Biologically Inspired Coupled Microphone Array for Sound Source Bearing Estimation,” J. Vib. Acoust., vol. 140, no. 1, pp. 011019, Oct. 2017. [48] R. Zhou, H. Zhang, and H. Xin, “Improved Two-Antenna Direction Finding Inspired by Human Ears,” IEEE Trans. Antennas Propag., vol. 59, no. 7, pp. 2691–2697, Jul. 2011. [49] O. Malyuskin and V. F. Fusco, “Ultracompact Retrodirective Antenna Arrays With Superdirective Radiation Patterns,” IEEE Trans. Antennas Propag., vol. 64, no. 7, pp. 2923–2935, Jul. 2016. [50] A. Haskou, A. Sharaiha, and S. Collardey, “Design of Small Parasitic Loaded Superdirective End-Fire Antenna Arrays,” IEEE Trans. Antennas Propag., vol. 63, no. 12, pp. 5456–5464, Dec. 2015. [51] J. C. Coetzee and Y. Yu, “New Modal Feed Network for a Compact Monopole Array With Isolated Ports,” IEEE Trans. Antennas Propag., vol. 56, no. 12, pp. 3872–3875, Dec. 2008. [52] L. Zhao, L. K. Yeung, and K. L. Wu, “A Coupled Resonator Decoupling Network for Two-Element Compact Antenna Arrays in Mobile Terminals,” IEEE Trans. Antennas Propag., vol. 62, no. 5, pp. 2767–2776, May 2014. [53] S. N. Venkatasubramanian, L. Li, A. Lehtovuori, C. Icheln, and K. Haneda, “Impact of Using Resistive Elements for Wideband Isolation Improvement,” IEEE Trans. Antennas Propag., vol. 65, no. 1, pp. 52–62, Jan. 2017. [54] H. Steyskal and J. S. Herd, “Mutual coupling compensation in small array antennas,” IEEE Trans. Antennas Propag., vol. 38, no. 12, pp. 1971–1975, Dec. 1990. [55] G. Wang, J. P. Lie, and C. M. S. See, “A passive coupling matrix design for improved resolution small aperture direction finding,” in 2011 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), 2011, pp. 2572–2575. [56] A. R. Masoumi, Y. Yusuf, and N. Behdad, “Biomimetic Antenna Arrays Based on the Directional Hearing Mechanism of the Parasitoid Fly Ormia Ochracea,” IEEE Trans. Antennas Propag., vol. 61, pp. 2500–2510, May 2013. [57] A. R. Masoumi and N. Behdad, “An Improved Architecture for Two-Element Biomimetic Antenna Arrays,” IEEE Trans. Antennas Propag., vol. 61, no. 12, pp. 6224–6228, Dec. 2013. [58] A. R. Masoumi, K. Ghaemi, and N. Behdad, “A Two-Element Biomimetic Antenna Array With Enhanced Angular Resolution and Optimized Power Extraction,” Antennas Propag. IEEE Trans. On, vol. 63, pp. 1059–1066, Mar. 2015. [59] N. Behdad, M. A Al-Joumayly, and M. Li, “Biologically Inspired Electrically Small Antenna Arrays With Enhanced Directional Sensitivity,” Antennas Wirel. Propag. Lett. IEEE, vol. 10, pp. 361–364, Feb. 2011. [60] M. Akçakaya and A. Nehorai, “Biologically inspired coupled antenna beampattern design,” Bioinspir. Biomim., vol. 5, no. 4, p. 046003, Dec. 2010. [61] A. R. Masoumi and N. Behdad, “Architecture, Design, and Nonlinear Optimization of Three-Element Biomimetic Antenna Arrays,” IEEE Antennas Wirel. Propag. Lett., vol. 12, pp. 1416–1419, 2013. [62] A. R. Masoumi, “Biologically-inspired, electrically small antenna arrays,” Ph.D. dissertation, Dept. Elect. Comput. Eng., Univ. Wisconsin-Madison, Madison, WI, USA, 2015. [63] A. M. Elfrgani and R. G. Rojas, “Biomimetic Antenna Array Using Non-Foster Network to Enhance Directional Sensitivity Over Broad Frequency Band,” IEEE Trans. Antennas Propag., vol. 64, no. 10, pp. 4297–4305, Oct. 2016. [64] A. R. Masoumi and N. Behdad, “Non-foster techniques for designing broadband electrically-small antennas and biomimetic antenna arrays,” in 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), 2014, pp. 28–28. [65] M. R. Nikkhah, K. Ghaemi, and N. Behdad, “An Electronically Tunable Biomimetic Antenna Array,” IEEE Trans. Antennas Propag., vol. 66, no. 3, pp. 1248–1257, Mar. 2018. [66] M. R. Nikkhah, K. Ghaemi, and N. Behdad, “A Three-Element Biomimetic Antenna Array With an Electrically Small Triangular Lattice,” IEEE Trans. Antennas Propag., vol. 65, no. 8, pp. 4007–4016, Aug. 2017. [67] Czarny, J., Conception, fabrication and characterization of a MEMS microphone, PhD Thesis, Lyon: Natl. Inst. Appl. Sci., 2015. [68] Merry, “Merry MEMS MMA204.” MMA204 datasheet, Jan. 2018. [69] P. Rong and M. Sichitiu, “Angle of arrival localization for wireless sensor networks,” in Proc. 3rd Ann. IEEE Commun. Soc. Sens. Ad Hoc Commun. Netw. (SECON’06), vol. 1, pp. 374–382, 2006. [70] Tang H., “DOA estimation based on MUSIC algorithm,” thesis, Linnæus University; 2014. [71] S. M. Kay, Modern spectral estimation : theory and application. Englewood Cliffs, N.J. : Prentice Hall, 1988. [72] R. D. DeGroat, E. M. Dowling, and D. A. Linebarger, “The constrained MUSIC problem,” IEEE Trans. Signal Process., vol. 41, no. 3, pp. 1445–1449, Mar. 1993. [73] F. Li and R. Vaccaro, “Analysis of Min-Norm and MUSIC with arbitrary array geometry,” Aerosp. Electron. Syst. IEEE Trans. On, vol. 26, pp. 976–985, Dec. 1990. [74] R. Schmidt, “Multiple emitter location and signal parameter estimation,” IEEE Trans. Antennas Propag., vol. 34, no. 3, pp. 276–280, Mar. 1986. [75] W. Xiao-guang and G. Tian-wen, “Direction of Arrival Parametric Estimation and Simulation Based on MATLAB,” in Proceedings of the 2011, International Conference on Informatics, Cybernetics, and Computer Engineering (ICCE2011) November 19–20, 2011, Melbourne, Australia, Springer, Berlin, Heidelberg, 2011, pp. 147–156. [76] Nicolaescu, I.; Stoica, D., 'Smart antennas for wireless communications systems,' in ICECom, 2010 Conference Proceedings, pp.1-4, 2010. [77] P. Gupta, S. P. Kar, 'MUSIC and improved MUSIC algorithm to estimate direction of arrival', Proc. 2015 Int. Conf. Commun. Signal Process, pp. 0757-0761, Apr. 2015. [78] B. Sharma, G. Singh, and I. Sarkar, “Study of DOA Estimation Using Music Algorithm,” International Journal of Scientific & Engineering Research, Vol. 6, pp. 594-603. [79] C. Sun and N. C. Karmakar, “Direction of Arrival Estimation Based on a Single Port Smart Antenna Using MUSIC Algorithm with Periodic Signals,” Int. J. Electron. Commun. Eng., vol. 1, no. 11, p. 10, 2007. [80] E. Kwizera, “Direction of Arrival Estimation Based on MUSIC Algorithm Using Uniform and Non-Uniform Linear Arrays,” Int. J. Eng. Res. Appl., vol. 07, pp. 51–58, Mar. 2017. [81] M. Willerton, D. Yates, V. Goverdovsky, and C. Papavassiliou, “Experimental characterization of a large aperture array localization technique using an SDR testbench,” in Wireless Innovation Forum Conf. on Comms Technologies and Software Defined Radio, Washington DC, Nov. 29–Dec. 2, 2011. [82] M. Erić, B. Igrić, 'Practical implementation and performance estimation of MUSIC method implemented on signal processor TMS 320c30', Scientific Technical Review, vol. 54, no. 1, 2004. [83] D. H. Kim and Y. Chung, “Accurate Position Detection of Sound Source by LabView,” Proceedings of 20 International Congress on Acoustics, ICA 2010, Sydney, Australia. p. 4, 2010. [84] M. S. Amin, Ahmed-Ur-Rahman, Saabah-Bin-Mahbub, K. I. Ahmed, and Z. R. Chowdhury, “Estimation of direction of arrival (DOA) using real-time Array Signal Processing,” Electrical and Computer Engineering 2008. ICECE 2008. International Conference , pp. 422-427, 2008. [85] B. Clark, J. A. Flint, 'Acoustical direction finding with time-modulated arrays', Sensors, vol. 16, no. 12, pp. 2107, 2016. [86] P. C. H. Hansen, “Fundamentals of acoustics,” Fundam. Acoust., p. 30. , 2006. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/71159 | - |
| dc.description.abstract | 近年來，生物啟發設計和仿生工程受到了許多關注，利用工程技術達到生物之功能。其廣泛的應用包括機器人，傳感器和復合材料等。本研究中，我們提出了一種微型化的聲學定向判斷系統，其靈感來自於模仿Ormia ochracea的特殊耦合結構。一般的兩個元件接收陣列由兩個接收器組成，兩個接收器至少要以半波長的距離分開，以便獲得可明顯區分的相位差或時間差，以便確定入射聲音的到達角度。兩個接收器之間的間距可以藉由質量塊，彈簧和阻尼器組成的機械耦合系統，來大幅降低已克服物理限制。由於耦合機制，兩個接收器之間的相位差可以被放大多倍，因此可以用於定位波源。根據接收器，為聲壓感測器或天線，可應用於聲源或電磁波波源方向判斷。
本研究中，我們提出了一個由純集總元件組成的電耦合電路來取代機械耦合系統以實現微型化。其系統包含兩個聲壓感測器(麥克風)、電耦合電路與其相位比較器。本論文內容包含理論分析，電路模擬驗證，與製作及無響室量測，經由最佳化相位放大與接收能量之參數，所設計之電路作用於10kHz，可針對前方180度入射角，其相位具有在-90度~90度之放大效果與接收能量。此外，本研究亦探討此耦合電路之使用頻寬與雜訊之影響。本研究成果預期將有助於發展與設計小型化聲納與雷達系統。 | zh_TW |
| dc.description.abstract | In recent years, bio-inspired devices and biomimetic engineering materials have attracted lots of attentions. The wide applications include multi-robots, actuators, sensors, and composite materials. In this research, we proposed a miniaturized acoustic directional finding system inspired by mimicking the fly ears of Ormia ochracea. A conventional two-element sensor array is composed of two sensors separated with a distance of at least of half wavelength for obtaining a distinguishable phase difference or time difference in order to determine the angle of arrival of incident sounds. It was demonstrated that the separating distance between the two sensors could be reduced significantly via a mechanical coupling system composed of masses, springs, and dampers. Due to the coupling mechanism, the phase difference between two sensors could be enhanced several times and can be used to locate the sound sources. The receiver can be a sound pressure sensor or an antenna, which can be applied to the direction of the sound source or the electromagnetic wave source.
In this study, we proposed an electrical coupling circuit consisting of pure lumped elements to replace the mechanical coupling system to achieve miniaturization. The system consists of two microphones, an electrical coupling circuit and its phase comparator. The content of this thesis includes theoretical analysis, circuit simulation verification, fabrication and measurement in anechoic chamber. By optimizing the parameters of phase amplification and receiving energy, the designed circuit operates at 10 kHz and can be used for the 180 degree angle from incidence angle. It has a magnification effect over -90 degrees to 90 degrees with receiving energy. In addition, this study also explores the effects of the bandwidth and noise of this coupling circuit. The results of this research are expected to contribute to the development and design of miniaturized sonar and radar systems. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-17T04:56:06Z (GMT). No. of bitstreams: 1 ntu-107-R05522512-1.pdf: 5028125 bytes, checksum: 24a91fa0d6f686c7395de742eddfc7e0 (MD5) Previous issue date: 2018 | en |
| dc.description.tableofcontents | 誌謝 i
中文摘要 ii ABSTRACT iii CONTENTS v LIST OF FIGURES vii LIST OF TABLES xi Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Literature Review 3 1.2.1 Anatomy 4 1.2.2 Diffraction Grating Microphone 6 1.2.3 Comb finger microphones 8 1.2.4 Optical fiber microphones 10 1.2.5 Piezoelectric microphones 11 1.2.6 Perforated diaphragm microphones 14 1.2.7 Coupling circuit design 15 1.3 Thesis Organization 22 Chapter 2 Coupling Network Design 23 2.1 System Model 23 2.2 Network Model 24 2.3 Microphones 31 2.4 Impedance Measurement 33 2.5 Design of the amplifying circuit 35 2.6 Circuit Model 38 2.7 Simulation result 40 Chapter 3 DOA Estimation Based on MUSIC Algorithm 42 3.1 Background 42 3.2 Principle of DOA estimation 44 3.3 MUSIC algorithm 45 3.4 LabVIEW Implementation 50 Chapter 4 Fabrication and Experiment 53 4.1 Micro strip lines network 53 4.2 Experimental setup 56 4.3 Phase difference 61 4.4 Normalized Power under different incident angle 62 4.5 Further Discussion 64 4.5.1 Comparison to transformer design 64 4.5.2 Comparison to tunable design 67 Chapter 5 Conclusion and future work 69 5.1 Conclusion 69 5.2 Improvement and Future work 71 REFERENCE 72 | |
| dc.language.iso | en | |
| dc.subject | MUSIC(Multiple Signal Classification) | zh_TW |
| dc.subject | 波源方向測位 | zh_TW |
| dc.subject | 仿生結構 | zh_TW |
| dc.subject | 麥克風陣列 | zh_TW |
| dc.subject | MUSIC(Multiple Signal Classification) | en |
| dc.subject | direction finding | en |
| dc.subject | biomimetic structure | en |
| dc.subject | microphone arrays | en |
| dc.title | 仿生微型化陣列應用於波源方向判定 | zh_TW |
| dc.title | Biomimetic Miniaturized Array System for Source Direction Finding | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 106-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 莊嘉揚,周元昉 | |
| dc.subject.keyword | 波源方向測位,仿生結構,麥克風陣列,MUSIC(Multiple Signal Classification), | zh_TW |
| dc.subject.keyword | direction finding,,biomimetic structure,microphone arrays,MUSIC(Multiple Signal Classification), | en |
| dc.relation.page | 79 | |
| dc.identifier.doi | 10.6342/NTU201802058 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2018-07-27 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
| 顯示於系所單位： | 機械工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-107-1.pdf 未授權公開取用 | 4.91 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。