Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
    • 指導教授
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 電機資訊學院
  3. 電子工程學研究所
請用此 Handle URI 來引用此文件: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68349
標題: 基於錯誤效應驅動決策樹以提高自動測試圖樣生成演算法之效能以及其實作範例
D-Drive History Tree to Enhance ATPG Efficiency and its Implementation Examples
作者: Ching-Yuan Chen
陳敬元
指導教授: 黃俊郎(Jiun-Lang Huang)
關鍵字: 決策樹,錯誤驅動,回溯修正,測試壓縮,路徑導向決策演算法,自動化測試圖樣產生,
decision tree,D-drive,backtrack,test compaction,PODEM,test pattern generation,
出版年 : 2017
學位: 碩士
摘要: 西元一九六六年,自動化測試圖樣產生演算法的始祖—錯誤效應演算法(D-Algorithm)首次發表。自此,大量的研究成果隨之而來,並在演算法加速以及產生圖樣品質上取得巨大的成果。即便如此,在演算法加速以及測試品質上仍存有許多進步空間 。
我們提出錯誤效應驅動決策樹以取代傳統算法中的決策樹。其紀錄每一次錯誤驅動(D-drive)程序中候選以及選中以傳遞錯誤效應之邏輯閘。該決策樹有助於減少測試圖樣產生過程中衍生多餘的邏輯值指定(Redundant Signal Assignment),並提供更精細錯誤驅動策略的可能性。這意味著更好的算法加速以及測試圖樣品質。於本論文中,我們提供兩個基於錯誤效應驅動決策樹的實作範例—深度優先 (DF-PODEM)以及錯誤效應傳播最大化之路徑導向決策演算法(PM-PODEM)。前者達到最高32%之演算法加速,而後者達到最高11%之測試圖樣壓縮率。根據實驗結果,兩個測試圖樣產生演算法皆提供更好的算法加速、測試涵蓋率(Test Coverage)、以及測試圖樣壓縮率。
值得注意的是,錯誤效應驅動決策樹相當易於整合至現有各式自動化測試圖樣系統,同時也易於擴展以達到更好的算法加速以及針對各式品質指標的測試圖樣品質優化。
Since the first publication of D-algorithm (DALG) in 1966, lots of following works on automatic test pattern generation (ATPG) algorithm have been proposed to achieve higher speed-up and quality of generated test set. Though big progress has been made through decades, it still has lots of room for improvement in speed-up and generated test quality of ATPG.
In this thesis, we propose D-drive History Tree (D-Tree) to replace the assignment decision tree in the conventional ATPG, which keeping track of all the candidates and the chosen gate(s) to propagate fault effect for each D-drive process. This D-tree helps eliminate the possibility of producing redundant signal assignments (RSAs) and makes more sophistical D-drive strategies possible, thus enhance the ATPG efficiency and/or the test quality. Two implementation examples based on PODEM algorithm—Depth-First PODEM (DF-PODEM) and Propagation Maximization PODEM (PM-PODEM) are proposed to show its power to immediate boost both performance and/or pattern quality of ATPG. DF-PODEM turns out to achieve up to 32% speed-up, along with higher fault coverage and/or compacted test length, on ISCAS'89 and ITC'99 benchmark circuits. PM-PODEM achieve up to 11% shorter test length, along with higher fault coverage and/or lower run-time, on the same set of circuits under test (CUT).
Also, as to be shown, D-tree could not only easily be integrated with pre-existed ATPG-improving strategies, but also quite flexible thus could easily be extended to gain even higher speed-up and higher quality specifically for different quality metrics.
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68349
DOI: 10.6342/NTU201704159
全文授權: 有償授權
顯示於系所單位:電子工程學研究所

文件中的檔案:
檔案 大小格式 
ntu-106-1.pdf
  未授權公開取用
1.85 MBAdobe PDF
顯示文件完整紀錄


系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved