請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67938
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 朱錦洲(Chin-Chou Chu) | |
dc.contributor.author | Yu-Ting Chen | en |
dc.contributor.author | 陳宇廷 | zh_TW |
dc.date.accessioned | 2021-06-17T01:59:19Z | - |
dc.date.available | 2025-08-14 | |
dc.date.copyright | 2020-09-17 | |
dc.date.issued | 2020 | |
dc.date.submitted | 2020-08-17 | |
dc.identifier.citation | [1] J. Thomson, 'XLII. On certain curious motions observable at the surfaces of wine and other alcoholic liquors,' The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol. 10, no. 67, pp. 330-333, 1855. [2] W. Van Wijk, A. Vos, and S. Van Stralen, 'Heat transfer to boiling binary liquid mixtures,' Chemical Engineering Science, vol. 5, no. 2, pp. 68-80, 1956. [3] N. Zhang, 'Innovative heat pipe systems using a new working fluid,' International communications in heat and mass transfer, vol. 28, no. 8, pp. 1025-1033, 2001. [4] Y. Abe, K. Tanaka, T. Yokoyama, and A. Iwasaki, 'Heat transfer devices with self-rewetting fluids,' in ASME 2004 International Mechanical Engineering Congress and Exposition, 2004: American Society of Mechanical Engineers Digital Collection, pp. 101-108. [5] Y. Abe, 'Self‐rewetting fluids: beneficial aqueous solutions,' Annals of the New York Academy of Sciences, vol. 1077, no. 1, pp. 650-667, 2006. [6] S.-C. Wong, Y.-C. Lin, and J.-H. Liou, 'Visualization and evaporator resistance measurement in heat pipes charged with water, methanol or acetone,' International journal of thermal sciences, vol. 52, pp. 154-160, 2012. [7] S.-C. Wong and Y.-C. Lin, 'Effect of copper surface wettability on the evaporation performance: Tests in a flat-plate heat pipe with visualization,' International journal of heat and mass transfer, vol. 54, no. 17-18, pp. 3921-3926, 2011. [8] R. Savino, N. di Francescantonio, R. Fortezza, and Y. Abe, 'Heat pipes with binary mixtures and inverse Marangoni effects for microgravity applications,' Acta Astronautica, vol. 61, no. 1-6, pp. 16-26, 2007. [9] R. Savino et al., 'Heat pipes with self-rewetting fluids for space applications,' SAE Technical Paper, 0148-7191, 2008. [10] N. Di Francescantonio, R. Savino, and Y. Abe, 'New alcohol solutions for heat pipes: Marangoni effect and heat transfer enhancement,' International Journal of Heat and Mass Transfer, vol. 51, no. 25-26, pp. 6199-6207, 2008. [11] R. Savino, A. Cecere, and R. Di Paola, 'Surface tension-driven flow in wickless heat pipes with self-rewetting fluids,' International Journal of Heat and Fluid Flow, vol. 30, no. 2, pp. 380-388, 2009. [12] K. Fumoto, M. Kawaji, and T. Kawanami, 'Study on a pulsating heat pipe with self-rewetting fluid,' Journal of electronic Packaging, vol. 132, no. 3, 2010. [13] M. Morovati, H. Bindra, S. Esaki, and M. Kawaji, 'Enhancement of pool boiling and critical heat flux in self-rewetting fluids at above atmospheric pressures,' in ASME/JSME 2011 8th Thermal Engineering Joint Conference, 2011: American Society of Mechanical Engineers Digital Collection. [14] A. Cecere et al., 'Experimental analysis of a Flat Plate Pulsating Heat Pipe with Self-ReWetting Fluids during a parabolic flight campaign,' Acta Astronautica, vol. 147, pp. 454-461, 2018. [15] G. Hwang, M. Kaviany, W. Anderson, and J. Zuo, 'Modulated wick heat pipe,' International Journal of Heat and Mass Transfer, vol. 50, no. 7-8, pp. 1420-1434, 2007. [16] A. E. Scheidegger, 'The physics of flow through porous media,' Soil Science, vol. 86, no. 6, p. 355, 1958. [17] D. Greenberg and E. Weger, 'An investigation of the viscous and inertial coefficients for the flow of gases through porous sintered metals with high pressure gradients,' Chemical Engineering Science, vol. 12, no. 1, pp. 8-19, 1960. [18] D. B. Greenberg, R. S. Cresap, and T. A. Malone, 'Intrinsic permeability of hydrological porous mediums: Variation with temperature,' Water Resources Research, vol. 4, no. 4, pp. 791-800, 1968. [19] J. Geertsma, 'Estimating the coefficient of inertial resistance in fluid flow through porous media,' Society of Petroleum Engineers Journal, vol. 14, no. 05, pp. 445-450, 1974. [20] W. W. Pulkrabek and W. E. Ibele, 'The effect of temperature on the permeability of a porous material,' International journal of heat and mass transfer, vol. 30, no. 6, pp. 1103-1109, 1987. [21] W. J. Mantle and W. S. Chang, 'Effective thermal conductivity of sintered metal fibers,' Journal of thermophysics and heat transfer, vol. 5, no. 4, pp. 545-549, 1991. [22] B. M. Holley and A. Faghri, 'Permeability and effective pore radius measurements for heat pipe and fuel cell applications,' in ASME International Mechanical Engineering Congress and Exposition, 2004, vol. 4711, pp. 353-371. [23] J.-H. Liou, C.-W. Chang, C. Chao, and S.-C. Wong, 'Visualization and thermal resistance measurement for the sintered mesh-wick evaporator in operating flat-plate heat pipes,' International journal of heat and mass transfer, vol. 53, no. 7-8, pp. 1498-1506, 2010. [24] T. Semenic, Y. Y. Lin, I. Catton, and D. B. Sarraf, 'Use of biporous wicks to remove high heat fluxes,' Applied Thermal Engineering, vol. 28, no. 4, pp. 278-283, 2008. [25] C. Byon and S. J. Kim, 'Capillary performance of bi-porous sintered metal wicks,' International Journal of Heat and Mass Transfer, vol. 55, no. 15-16, pp. 4096-4103, 2012. [26] B. Yu and P. Cheng, 'A fractal permeability model for bi-dispersed porous media,' International Journal of Heat and Mass Transfer, vol. 45, no. 14, pp. 2983-2993, 2002. [27] T. Semenic and I. Catton, 'Experimental study of biporous wicks for high heat flux applications,' International Journal of Heat and Mass Transfer, vol. 52, no. 21-22, pp. 5113-5121, 2009. [28] C. Byon, S. Choi, and S. J. Kim, 'Critical heat flux of bi-porous sintered copper coatings in FC-72,' International Journal of Heat and Mass Transfer, vol. 65, pp. 655-661, 2013. [29] Y.-Q. Wang, J.-L. Luo, Y. Heng, D.-C. Mo, and S.-S. Lyu, 'Wettability modification to further enhance the pool boiling performance of the micro nano bi-porous copper surface structure,' International Journal of Heat and Mass Transfer, vol. 119, pp. 333-342, 2018. [30] C. Byon and S. J. Kim, 'Study on the capillary performance of micro-post wicks with non-homogeneous configurations,' International Journal of Heat and Mass Transfer, vol. 68, pp. 415-421, 2014. [31] L. Lu, J. Sun, Q. Liu, X. Liu, and Y. Tang, 'Influence of electrochemical deposition parameters on capillary performance of a rectangular grooved wick with a porous layer,' International Journal of Heat and Mass Transfer, vol. 109, pp. 737-745, 2017. [32] S. H. Moon, H. G. Yun, G. Hwang, and T. G. Choy, 'Experimental Study on the Performance of Miniature Heat Pipes With Woven-Wire Wick,' IEEE Transactions on Components and Packaging Technologies, vol. 24, no. 4, pp. 591-595, 2001. [33] L. Lin, R. Ponnappan, and J. Leland, 'High performance miniature heat pipe,' International Journal of Heat and Mass Transfer, vol. 45, no. 15, pp. 3131-3142, 2002. [34] A. A. Attia and B. T. El-Assal, 'Experimental investigation of vapor chamber with different working fluids at different charge ratios,' Heat Pipe Science and Technology, An International Journal, vol. 3, no. 1, 2012. [35] Y. Wang and G. Peterson, 'Investigation of a novel flat heat pipe,' J. Heat Transfer, vol. 127, no. 2, pp. 165-170, 2005. [36] A. Faghri, Heat pipe science and technology. Global Digital Press, 1995. [37] B. Kim and G. Peterson, 'Analysis of the critical Weber number at the onset of liquid entrainment in capillary-driven heat pipes,' International journal of heat and mass transfer, vol. 38, no. 8, pp. 1427-1442, 1995. [38] C. J. Oshman, 'Development, fabrication, and experimental study of flat polymer micro heat pipes,' 2012. [39] A. Mills, 'Heat and Mass Transfer, Irwin,' Inc., Chicago, 1995. [40] M. Lappa, R. Savino, and R. Monti, 'Three‐dimensional numerical simulation of Marangoni instabilities in liquid bridges: influence of geometrical aspect ratio,' International journal for numerical methods in fluids, vol. 36, no. 1, pp. 53-90, 2001 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67938 | - |
dc.description.abstract | 近年來,薄型均溫板(Vapor Chamber)被廣泛使用於手機以及各種電子產品當中進行散熱,雖然薄型均溫板傳熱能力可達金屬材料的數十倍到數百倍之多,但目前薄型均溫板還是會因為工作流體乾涸(dry-out)造成熱傳限制,為了讓薄型均溫板具有更好的熱傳效能,各大廠商也不斷研究改變均溫板的毛細結構與改變工作流體提升熱傳效能。 現今的均溫板大多都還是選用純水做為工作流體,因為純水具有較高優值(Figure of Merit,M),但優值考慮到的流體參數只包含汽化潛熱、密度、黏滯係數與表面張力,並未考慮表面張力隨溫度變化之梯度,因此本研究將把表面張力隨溫度變化之梯度納入考量,藉以找到散熱效率較高之工作流體。 本實驗將量測各高碳醇水溶液之表面張力隨溫度變化之關係,以自再潤濕流體(Self-Rewetting Fluid)做為工作流體,利用馬蘭哥尼效應增加均溫板中工作流體由冷凝端回流至蒸發端之流量,避免乾涸(Dry-out)現象發生,提升最大熱傳量,並透過可視化熱測試系統觀察不同的工作流體在均溫板內運作情形,再藉由熱阻分析,找出不同瓦數下熱傳效益最高之工作流體及最佳毛細結構。且由實驗結果我們可得6%的叔丁醇水溶液與其它溶液相比在各輸入瓦數下都具有較好的熱傳表現,同時在30%開口率之毛細結構具有最好的熱阻表現。 | zh_TW |
dc.description.abstract | In recent years, the vapor chamber has been widely used in mobile phones and various electronic products for heat dissipation. Although the heat transfer capability of the vapor chamber can reach tens to hundreds of times of metal materials, the current vapor chamber will still cause heat transfer restrictions due to the dry-out of the working fluid. In order to make the vapor chamber have better heat transfer performance, many major manufacturers are also constantly studying to change the capillary structure of the vapor chamber and change the working fluid Improve heat transfer efficiency. Most of the current vapor chamber still use pure water as the working fluid, because pure water has a higher figure of merit (Figure of Merit, M). However, the fluid parameters considered by the figure of Merit only include latent heat of vaporization, density, viscosity coefficient and surface tension, the gradient of surface tension with temperature is not considered. Therefore, this study will take the gradient of surface tension with temperature into consideration to find a working fluid with higher heat dissipation efficiency. This experiment will find the relationship between the surface tension of each high-carbon alcohol aqueous solution and the temperature change. Take self-rewetting fluid as the working fluid, and use Marangoni effect to increase the flow of the working fluid from the condenser section to the evaporator section of the vapor chamber to avoid dry-out phenomenon occurs and the maximum heat transfer and observes the operation of different working fluids in the vapor chamber through the visualized heat testing system, and then through the thermal resistance analysis to find the working fluid with the highest heat transfer efficiency and the best capillary structure under different input watts . From the experimental results, we can get that the 6% tert-butanol aqueous solution has better heat transfer performance at each input watt compared with other solutions, and the capillary structure with 30% opening ratio has the best thermal resistance performance. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T01:59:19Z (GMT). No. of bitstreams: 1 U0001-1408202016522900.pdf: 4523145 bytes, checksum: 0cd98c54e63a3c9e5331d36bc4a7c7cf (MD5) Previous issue date: 2020 | en |
dc.description.tableofcontents | 誌謝 i 摘要 ii Abstract iii 目錄 v 圖目錄 viii 表目錄 xi 第一章 緒論 1 1.1 前言 1 1.2 研究背景 1 1.2.1 馬蘭哥尼效應(Marangoni effect) 2 1.2.2 自再潤濕流體(Self-Rewetting Fluid) 3 1.3 文獻回顧 5 1.4 研究動機 13 第二章 基礎原理 14 2.1 熱管有效長度 14 2.2 毛細結構 15 2.3 熱管性能限制 16 2.4 熱阻分析 24 2.5 工作流體 25 2.6 馬蘭哥尼方程式推導 26 第三章 實驗方法與設備 30 3.1 實驗材料 30 3.1.1 均溫板材料: 30 3.1.2 高碳醇溶液 30 3.2 銅網焊接流程 31 3.3 實驗設備 32 3.3.1 可視化系統架設 38 3.3.2 工作流體填充 39 3.4 工作流體選用 41 3.5 毛細結構設計 43 3.6 表面張力量測 44 第四章 結果與討論 46 4.1 高碳醇水溶液表面張力隨溫度變化之實驗結果 46 4.1.1 2~8%正丙醇、2~8%異丙醇 47 4.1.2 2~6%正丁醇、2~6%叔丁醇 50 4.1.3 1~2%正戊醇、1~2%叔戊醇 53 4.2 純水與高碳醇溶液對均溫板之熱傳影響 55 4.2.1 純水 55 4.2.2 2%正丁醇 57 4.2.3 4%正丁醇 59 4.2.4 正丁醇水溶液與純水之熱阻比較 61 4.2.5 2%叔丁醇 62 4.2.6 4%叔丁醇 64 4.2.7 6%叔丁醇 66 4.2.8 叔丁醇水溶液與純水之熱阻比較 68 4.2.9 2%正戊醇 69 4.2.10 2%叔戊醇 71 4.2.11 正戊醇、叔戊醇與純水之熱阻比較 73 4.3 不同開口率毛細結構對均溫板之熱傳影響 74 4.3.1 開口率25% 74 4.3.2 開口率30% 77 4.3.3 開口率35% 80 4.3.4 開口率40% 83 4.3.5 開口率45% 86 4.3.6 開口率50% 89 4.3.7 各開口率之熱阻比較 92 第五章 結論與未來展望 93 5.1 結論 93 5.1.1 不同工作溶液 93 5.1.2 不同毛細結構 93 5.2 未來展望 95 參考文獻 96 | |
dc.language.iso | zh-TW | |
dc.title | 自再潤濕流體於薄型均溫板熱傳增益與工作流體性能分析之可視化研究 | zh_TW |
dc.title | Visualization of Heat Transfer Enhancement of a Thin Vapor Chamber with Self-Rewetting Fluids and Working Fluids Performance Analysis | en |
dc.type | Thesis | |
dc.date.schoolyear | 108-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 張建成(Chien-Cheng Chang) | |
dc.contributor.oralexamcommittee | 張家歐(Chia-Ou Chang),林真真(Jen-Jen Lin),黃世霖(Shih-Lin Huang),葉建志(Chien-Chih Yeh) | |
dc.subject.keyword | 薄型均溫板,自再潤濕流體,馬蘭哥尼效應,表面張力,可視化熱測試, | zh_TW |
dc.subject.keyword | Vapor chamber,Self-rewetting fluid,Marangoni effect,Visualized heat testing, | en |
dc.relation.page | 100 | |
dc.identifier.doi | 10.6342/NTU202003460 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2020-08-17 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
U0001-1408202016522900.pdf 目前未授權公開取用 | 4.42 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。