請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67889
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 薛承輝 | |
dc.contributor.author | Ya-Hsuan Wu | en |
dc.contributor.author | 吳亞璇 | zh_TW |
dc.date.accessioned | 2021-06-17T01:56:15Z | - |
dc.date.available | 2022-07-28 | |
dc.date.copyright | 2017-07-28 | |
dc.date.issued | 2017 | |
dc.date.submitted | 2017-07-21 | |
dc.identifier.citation | [1] W. Klement, R.H. Willens, P.O.L. Duwez, Non-crystalline structure in solidified gold–silicon alloys, Nature 187 (1960) 869–870.
[2] H.S. Chen, Thermodynamic considerations on the formation and stability of metallic glasses, Acta Mater. 22 (1974) 1505–1511. [3] A.J. Drehman, A.L. Greer, D. Turnbull, Bulk formation of a metallic glass: Pd40Ni40P20, Appl. Phys. Lett. 41 (1982) 716–717. [4] A. Inoue, T. Zhang, T. Masumoto, Al–La–Ni amorphous alloys with a wide supercooled liquid region, Mater. Trans., JIM 30 (1989) 965–972. [5] T. Zhang, A. Inoue, T. Masumoto, Amorphous Zr-Al-Tm (Tm = Co, Ni, Cu) alloys with significant supercooled liquid region of over 100K, Mater. Trans., JIM 32 (1991) 1005–1010. [6] A. Peker, W.L. Johnson, A highly processable metallic-glass - Zr41.2Ti13.8Cu12.5Ni10.0Be22.5, Appl. Phys. Lett. 63 (1993) 2342–2344. [7] A. Inoue, N. Nishiyama, H. Kimura, Preparation and thermal stability of bulk amorphous Pd40Cu30Ni10P20 alloy cylinder of 72 mm in diameter, Mater. Trans., JIM 38 (1997) 179–183. [8] A. Inoue, A. Takeuchi, Recent progress in bulk glassy alloys, Mater. Trans. 43 (2002) 1892–1906. [9] M. Telford, The case for bulk metallic glass, Mater. today 7 (2004) 36–43. [10] J.P. Chu, T.-Y. Liu, C.-L. Li, C.-H. Wang, J.S.C. Jang, M.-J. Chen, S.-H. Chang, W.-C. Huang, Fabrication and characterizations of thin film metallic glasses: Antibacterial property and durability study for medical application, Thin Solid Films 561 (2014) 102–107. [11] P.H. Tsai, Y.Z. Lin, J.B. Li, S.R. Jian, J.S.C. Jang, C. Li, J.P. Chu, J.C. Huang, Sharpness improvement of surgical blade by means of ZrCuAlAgSi metallic glass and metallic glass thin film coating, Intermetallics 31 (2012) 127–131. [12] V.R.V. Ramanan, Metallic glasses in distribution transformer applications: An update, J. Mater. Eng. 13 (1991) 119–127. [13] J. Schroers, Q. Pham, A. Desai, Thermoplastic forming of bulk metallic glass–A technology for MEMS and microstructure fabrication, J. Microelectromech. Syst. 16 (2007) 240–247. [14] J. Schroers, T. Nguyen, S. O'Keeffe, A. Desai, Thermoplastic forming of bulk metallic glass–Applications for MEMS and microstructure fabrication, Mater. Sci. Eng. A (2007) 898–902. [15] H.W. Jeong, S. Hata, A. Shimokohbe, Microforming of three-dimensional microstructures from thin-film metallic glass, J. Microelectromech. Syst. 12 (2003) 42–52. [16] A. Inoue, F.L. Kong, S.L. Zhu, E. Shalaan, F.M. Al-Marzouki, Production methods and properties of engineering glassy alloys and composites, Intermetallics 58 (2015) 20–30. [17] Q. Luo, W.H. Wang, Rare earth based bulk metallic glasses, J. Non-Cryst. Solids 355 (2009) 759–775. [18] M.F. Ashby, A.L. Greer, Metallic glasses as structural materials, Scr. Mater. 54 (2006) 321–326. [19] F.C. Frank, Supercooling of liquids, Proc. R. Soc. A 215 (1952) 43–46. [20] H.W. Sheng, W.K. Luo, F.M. Alamgir, J.M. Bai, E. Ma, Atomic packing and short-to-medium-range order in metallic glasses, Nature 439 (2006) 419–425. [21] T. Schenk, D. Holland-Moritz, V. Simonet, R. Bellissent, D.M. Herlach, Icosahedral short-range order in deeply undercooled metallic melts, Phys. Rev. Lett. 89 (2002) 075507. [22] A.L. Greer, Metallic glasses, Science 267 (1995) 1947–1953. [23] H. Bei, Z.P. Lu, E.P. George, Theoretical strength and the onset of plasticity in bulk metallic glasses investigated by nanoindentation with a spherical indenter, Phys. Rev. Lett. 93 (2004) 125504. [24] B. Yang, C.T. Liu, T.G. Nieh, Unified equation for the strength of bulk metallic glasses, Appl. Phys. Lett. 88 (2006) 221911. [25] H.J. Leamy, T.T. Wang, H.S. Chen, Plastic flow and fracture of metallic glass, Metall. Mater. Trans. A 3 (1972) 699–708. [26] J.J. Lewandowski, A.L. Greer, Temperature rise at shear bands in metallic glasses, Nat. Mater. 5 (2006) 15–18. [27] F. Spaepen, Microscopic mechanism for steady-state inhomogeneous flow in metallic glasses, Acta Metall. Mater. 25 (1977) 407–415. [28] W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw, M.L. Morrison, J.A. Horton, C.A. Carmichael, J.L. Wright, Localized corrosion behavior of a zirconium-based bulk metallic glass relative to its crystalline state, Intermetallics 10 (2002) 1157–1162. [29] K. Asami, C.-L. Qin, T. Zhang, A. Inoue, Effect of additional elements on the corrosion behavior of a Cu–Zr–Ti bulk metallic glass, Mater. Sci. Eng. A 375 (2004) 235–239. [30] A. Pardo, E. Otero, M.C. Merino, M.D. Lopez, M. Vazquez, P. Agudo, The influence of Cr addition on the corrosion resistance of Fe73.5Si13.5B9Nb3Cu1 metallic glass in marine environments, Corros. Sci. 44 (2002) 1193–1211. [31] L. Liu, C.L. Qiu, H. Zou, K.C. Chan, The effect of the microalloying of Hf on the corrosion behavior of ZrCuNiAl bulk metallic glass, J. Alloy Compd. 399 (2005) 144–148. [32] J.F. Wang, R. Li, N.B. Hua, L. Huang, T. Zhang, Ternary Fe-P-C bulk metallic glass with good soft-magnetic and mechanical properties, Scr. Mater. 65 (2011) 536–539. [33] T. Zhang, F.J. Liu, S.J. Pang, R. Li, Ductile Fe-based bulk metallic glass with good soft-magnetic properties, Mater. Trans. 48 (2007) 1157–1160. [34] A. Makino, T. Kubota, M. Makabe, C.T. Chang, A. Inoue, FeSiBP metallic glasses with high glass-forming ability and excellent magnetic properties, Mater. Sci. Eng. B 148 (2008) 166–170. [35] K.Q. Qiu, H.F. Zhang, A.M. Wang, B.Z. Ding, Z.Q. Hu, Glass-forming ability and thermal stability of Nd70–xFe20Al10Yx alloys, Acta Mater. 50 (2002) 3567–3578. [36] S.V. Madge, P. Sharma, D.V. Louzguine-Luzgin, A.L. Greer, A. Inoue, New La-based glass–crystal ex situ composites with enhanced toughness, Scr. Mater. 62 (2010) 210–213. [37] J.B. Li, J.S.C. Jang, S.R. Jian, K.W. Chen, J.F. Lin, J.C. Huang, Plasticity improvement of ZrCu-based bulk metallic glass by ex situ dispersed Ta particles, Mater. Sci. Eng. A 528 (2011) 8244–8248. [38] H. Choi-Yim, R. Busch, U. Köster, W.L. Johnson, Synthesis and characterization of particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites, Acta Mater. 47 (1999) 2455–2462. [39] H. Choi-Yim, R.D. Conner, F. Szuecs, W.L. Johnson, Processing, microstructure and properties of ductile metal particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites, Acta Mater. 50 (2002) 2737–2745. [40] H. Zhang, Z.F. Zhang, Z.G. Wang, H.F. Zhang, Q.S. Zang, K.Q. Qiu, Effects of tungsten fiber on failure mode of Zr-based bulk metallic glassy composite, Metall. Mater. Trans. A 37 (2006) 2459–2469. [41] D.C. Hofmann, J.-Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, W.L. Johnson, Designing metallic glass matrix composites with high toughness and tensile ductility, Nature 451 (2008) 1085–1089. [42] D.C. Hofmann, Shape memory bulk metallic glass composites, Science 329 (2010) 1294–1295. [43] C. Fan, R.T. Ott, T.C. Hufnagel, Metallic glass matrix composite with precipitated ductile reinforcement, Appl. Phys. Lett. 81 (2002) 1020–1022. [44] H.J. Chang, E.S. Park, W. Yook, D.H. Kim, Network structure composite in phase separating Gd30Zr25Al25(Co/Cu)20 metallic glassy alloys, Intermetallics 18 (2010) 1846–1850. [45] T. Wada, D.V. Louzguine-Luzgin, A. Inoue, Preparation of Zr-based metallic glass nanowires and nanoparticles by selective etching, Scr. Mater. 57 (2007) 901–904. [46] A.A. Kündig, M. Ohnuma, D.H. Ping, T. Ohkubo, K. Hono, In situ formed two-phase metallic glass with surface fractal microstructure, Acta Mater. 52 (2004) 2441–2448. [47] K. Ziewiec, Transformations in liquid state and microstructure development in immiscible Fe60Cu20P10Si5B5 alloy, J. Non-Cryst. Solids 358 (2012) 1790–1794. [48] K. Ziewiec, Z. Kędzierski, The microstructure development in Fe32Cu20Ni28P10Si5B5 immiscible alloy and possibilities of formation of amorphous/crystalline composite, J. Alloy Compd. 480 (2009) 306–310. [49] X.H. Du, J.C. Huang, H.M. Chen, H.S. Chou, Y.H. Lai, K.C. Hsieh, J.S.C. Jang, P.K. Liaw, Phase-separated microstructures and shear-banding behavior in a designed Zr-based glass-forming alloy, Intermetallics 17 (2009) 607–613. [50] X.H. Du, J.C. Huang, K.C. Hsieh, Y.H. Lai, H.M. Chen, J.S.C. Jang, P.K. Liaw, Two-glassy-phase bulk metallic glass with remarkable plasticity, Appl. Phys. Lett. 91 (2007) 131901. [51] J.B. Pethica, R. Hutchings, W.C. Oliver, Hardness measurement at penetration depths as small as 20 nm, Philos. Mag. A 48 (1983) 593–606. [52] W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7 (1992) 1564–1583. [53] E.G. Herbert, W.C. Oliver, G.M. Pharr, Nanoindentation and the dynamic characterization of viscoelastic solids, J. Phys. D: Appl. Phys. 41 (2008) 074021. [54] A. Bharathula, S.W. Lee, W.J. Wright, K.M. Flores, Compression testing of metallic glass at small length scales: Effects on deformation mode and stability, Acta Mater. 58 (2010) 5789–5796. [55] M.C. Liu, J.C. Huang, Y.T. Fong, S.P. Ju, X.H. Du, H.J. Pei, T.G. Nieh, Assessing the interfacial strength of an amorphous–crystalline interface, Acta Mater. 61 (2013) 3304–3313. [56] A. Inoue, S.J. Chen, T. Masumoto, Zr-Y base amorphous-alloys with 2 glass transitions and 2 supercooled liquid regions, Mater. Sci. Eng. A 179 (1994) 346–350. [57] N. Mattern, U. Kühn, A. Gebert, T. Gemming, M. Zinkevich, H. Wendrock, L. Schultz, Microstructure and thermal behavior of two-phase amorphous Ni–Nb–Y alloy, Scr. Mater. 53 (2005) 271–274. [58] S.S. Chen, H.R. Zhang, I. Todd, Phase-separation-enhanced plasticity in a Cu47.2Zr46.5Al5.5Nb0.8 bulk metallic glass, Scr. Mater. 72–73 (2014) 47–50. [59] Y.L. Ren, R.L. Zhu, J. Sun, J.H. You, K.Q. Qiu, Phase separation and plastic deformation in an Mg-based bulk metallic glass, J. Alloy Compd. 493 (2010) L42–L46. [60] L. Wang, K.Q. Qiu, Y.L. Ren, R.D. Li, Microstructure and mechanical properties of a phase-separating Mg-based bulk metallic glass, J. Alloy Compd. 612 (2014) 5–9. [61] A. Takeuchi, A. Inoue, Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element, Mater. Trans. 46 (2005) 2817–2829. [62] H.C. Lin, P.H. Tsai, J.H. Ke, J.B. Li, J.S.C. Jang, C.H. Huang, J.C. Haung, Designing a toxic-element-free Ti-based amorphous alloy with remarkable supercooled liquid region for biomedical application, Intermetallics 55 (2014) 22–27. [63] Y. Shen, J.H. Perepezko, The effect of minor addition of insoluble elements on transformation kinetics in amorphous Al alloys, J. Alloy Compd. 643 (2015) S260–S264. [64] Z.P. Lu, Y. Li, S.C. Ng, Reduced glass transition temperature and glass forming ability of bulk glass forming alloys, J. Non-Cryst. Solids 270 (2000) 103–114. [65] Z.P. Lu, H. Tan, S.C. Ng, Y. Li, The correlation between reduced glass transition temperature and glass forming ability of bulk metallic glasses, Scr. mater. 42 (2000) 667–673. [66] D. Oriwol, D. Oriwol, A.N. Danilewsky, L. Sylla, W. Seifert, H.S. Leipner, M. Kittler, H.S. Leipner, Small-angle subgrain boundaries emanating from dislocation pile-ups in multicrystalline silicon studied with synchrotron white-beam X-ray topography, Acta Mater. 61 (2013) 6903–6910. [67] P. Wang, L. Zhou, Y. Du, H. Xu, S. Liu, L. Chen, Y. Ouyang, Thermodynamic optimization of the Cu–Nd system, J. Alloy Compd. 509 (2011) 2679–2683. [68] A. Takeuchi, A. Inoue, Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys, Mater. Trans., JIM 41 (2000) 1372–1378. [69] W.L. Johnson, Bulk glass-forming metallic alloys: Science and technology, MRS Bull. 24 (1999) 42–56. [70] J.M. Wheeler, J. Michler, Elevated temperature, nano-mechanical testing in situ in the scanning electron microscope, Rev. Sci. Instrum. 84 (2013) 045103. [71] Z.W. Shan, J. Li, Y.Q. Cheng, A.M. Minor, S.A. Syed Asif, O.L. Warren, E. Ma, Plastic flow and failure resistance of metallic glass: Insight from in situ compression of nanopillars, Phys. Rev. B 77 (2008) 155419. [72] W.H. Jiang, G.J. Fan, F.X. Liu, G.Y. Wang, H. Choo, P.K. Liaw, Rate dependence of shear banding and serrated flows in a bulk metallic glass, J. Mater. Res. 21 (2006) 2164–2167. [73] J.L. Cheng, G. Chen, F. Xu, Y.L. Du, Y.S. Li, C.T. Liu, Correlation of the microstructure and mechanical properties of Zr-based in-situ bulk metallic glass matrix composites, Intermetallics 18 (2010) 2425–2430. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67889 | - |
dc.description.abstract | 在這個實驗中以Zr-Ti-Cu-Nd 金屬玻璃複合材料為研究對象。首先利用熔體紡絲的方式製作成金屬玻璃薄帶。透過一系列的研究來觀察其為結構和機械性質的關係。Zr-Ti-Cu-Nd金屬玻璃複合材料主要是利用部分元素液相不互溶的特性來形成二相混合的複合材料。在這個實驗中,透過觀察微結構以及元素分布的情況,相分離的現象將會進一步地被討論。由於混合熱的影響,Nd從Zr/Ti所形成的基材分開,而Cu的分布也因為受到元素間混合熱差異的影響變得不均勻。同時經由掃描式電子顯微鏡的觀測可以發現在整個薄帶中,析出物的分佈以及大小並非均勻散布。而主要的成因則是因為薄帶內外降溫速率不同所導致。在硬度測試中,硬度的分布也會受到為結構的影響,導致薄帶中央較表面來得軟。模量映射的結果則顯示基材具有較高的儲存模數而析出物則是有較高的損失模數。透過微觀的壓縮試驗能發現當Nd的含量越多時,複合材料的塑性也會被提升的更多,這樣的結果說明了在金屬玻璃內析出第二相能夠有效的提升其延展性。 | zh_TW |
dc.description.abstract | The Zr-Ti-Cu-Nd metallic glass ribbons with different amounts of Nd were fabricated by melt spinning. The ribbons were used to examine the microstructure and the mechanical properties. Since the positive mixing enthalpy between some elements, the phenomenon of liquid phase separation occurred and formed the metallic glass composites. Specifically, Nd separated from the Zr/Ti based metallic glass matrix and precipitated with Cu during the cooling process. In addition to Nd, the distribution of Cu was nonuniform because its mixing enthalpies with Nd and Zr/Ti were different. This was verified by energy-dispersive X-ray spectroscopy. The images from scanning electron microscopy showed that the microstructure was inhomogeneous across the thickness of the ribbon because of the different cooling rates. By examining the hardness, the ribbons were softer in the middle and harder on both surface sides because of the different distributions of precipitates. Using modulus mapping, the matrix showed the higher storage modulus and the precipitates showed the higher loss modulus in contract. The micropillar compression tests showed that the samples with more additive Nd contents presented larger plasticity which proved that the soft second phase in these composites was effective in plasticity enhancements. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T01:56:15Z (GMT). No. of bitstreams: 1 ntu-106-R03527027-1.pdf: 19885095 bytes, checksum: 08f18aa4c6630b54cdc2a2ee9f04544a (MD5) Previous issue date: 2017 | en |
dc.description.tableofcontents | 口試委員會審定書...................................................................................... i
致謝.....................................................ii 中文摘要.....................................................................................................iii ABSTRACT.................................................................................................iv LIST OF FIGURES.....................................................................................vii LIST OF TABLES........................................................................................x Chapter 1 Preface......................................................................................1 1.1 Preface.................................................................................................1 1.2 Motivation of Study...............................................................................2 Chapter 2 Literature Review.......................................................................3 2.1 Metallic Glasses...................................................................................3 2.1.1 History of Development and Application of Metallic glasses.............3 2.1.2 Properties of BMGs...........................................................................9 2.2 Metallic Glass Composites..................................................................13 2.2.1 Ex-Situ Methods...............................................................................14 2.2.2 In-situ Methods.................................................................................16 2.2.3 Liquid-phase-separation Formed Metallic Glass Composites..........19 2.3 Nanoindentation..................................................................................20 2.3.1 Basic Theory.....................................................................................21 2.3.2 Dynamic Mechanical Analysis..........................................................23 Chapter 3 Experimental Process...............................................................26 3.1 Experimental Flow...............................................................................26 3.2 Preparation of the ribbons...................................................................28 3.3 Analysis of the Microstructure and the Mechanical Properties...........28 3.3.1 Electron probe X-ray microanalyzer (EPMA)...................................28 3.3.2 X-ray diffraction (XRD).....................................................................29 3.3.3 Differential scanning calorimeter (DSC)..........................................29 3.3.4 Scanning electron microscopy (SEM)..............................................30 3.3.5 Transition electron microscopy (TEM).............................................30 3.3.6 Preparation of the TEM samples......................................................31 3.3.7 Nanoindenter....................................................................................32 3.3.8 Picoindenter.....................................................................................32 Chapter 4 Microstructure of the Metallic Glass Composites.....................34 4.1 Background.........................................................................................34 4.2 Composition of different samples........................................................35 4.3 Amorphous state and thermal property of the samples......................35 4.4 Phase separation of Zr-Ti-Cu-Nd metallic glass composites..............40 4.5 Element distribution of the phase-separated composites...................45 4.6 Positive heat of mixing induced liquid-phase separation....................48 Chapter 5 Mechanical property affected by microstructure......................50 5.1 Inhomogeneous hardness through the cross section of the ribbons...50 5.2 Comparing the mechanical properties between the Zr-rich metallic glass matrix and the Cu/Nd crystalline phase....................................................51 5.3 Plasticity enhancement by liquid-phase-separation induced second phase........................................................................................................55 Chapter 6 Conclusion................................................................................62 References................................................................................................63 | |
dc.language.iso | en | |
dc.title | 液相分離Zr-Ti-Cu-Nd金屬玻璃複合材料之微結構及機械性質探討 | zh_TW |
dc.title | Microstructure and Mechanical Properties of Liquid-phase-separated Zr-Ti-Cu-Nd Metallic Glass Composites | en |
dc.type | Thesis | |
dc.date.schoolyear | 105-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 鄭憲清,朱瑾 | |
dc.subject.keyword | 金屬玻璃,液相分離,混合熱,微結構,機械性質,析出, | zh_TW |
dc.subject.keyword | Metallic glass,Liquid phase separation,Enthalpy,Microstructure,Mechanical properties,Precipitate, | en |
dc.relation.page | 70 | |
dc.identifier.doi | 10.6342/NTU201701672 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2017-07-21 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-1.pdf 目前未授權公開取用 | 19.42 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。