請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67332
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 顏溪成 | |
dc.contributor.author | Yu-Ru Kuo | en |
dc.contributor.author | 郭昱汝 | zh_TW |
dc.date.accessioned | 2021-06-17T01:28:10Z | - |
dc.date.available | 2027-08-07 | |
dc.date.copyright | 2017-09-07 | |
dc.date.issued | 2017 | |
dc.date.submitted | 2017-08-07 | |
dc.identifier.citation | [1] 楊正杰,張鼎張,鄭晃忠, '銅金屬與低介電常數材料與製程,' 國科會國家毫微米元件實驗室通訊, 第七卷第四期, pp. 40-46, 2000.
[2] Steigerwald J.M., Zirpoli R., Murarka S.P., Price D., Gutmann R.J., 'Pattern Geometry Effects in the Chemical-Mechanical Polishing of Inlaid Copper Structures,' J. Electrochem. Soc., vol. 141, pp. 2842-2848, 1994. [3] Chen H.C., Tseng B.H., Houng M.P., Wang Y.H., 'Titanium nitride diffusion barrier for copper metallization on gallium arsenide,' Thin Solid Films, vol. 445, pp. 112-117, 2003. [4] Arunagiri T. N., Zhang Y., Chyan O., Kim M. J., Hurd T. Q., 'Interfacial Diffusion Studies of Cu/(5 nm Ru)/Si Structures,' J. Electrochem. Soc., vol. 152, pp. G808-G812, 2005. [5] Kuo Y.L., Lee H.H., Lee C., Lin J.C., Shue S.L., Liang M.S., 'Diffusion of Copper in Titanium Zirconium Nitride Thin Films,' Electrochemical and Solid-State Letters, vol. 7, pp. C35-C37, 2004. [6] Laurila T., Molarius J., Kivilahti J.K., 'Interfacial reactions in the Si/TaC/Cu system,' Microelectronic Engineering, vol. 71, pp. 301-309, 2004. [7] Qu X.P., Lu H., Peng T., Ru G.P., Li B.Z., 'Effects of preannealing on the diffusion barrier properties for ultrathin W–Si–N thin film,' Thin Solid Films, vol. 462-463, pp. 67-71, 2004. [8] Arunagiri T.N., Zhang Y., Chyan O., El-Bouanani M., Kim M.J., Chen K.H., '5nm ruthenium thin film as a directly plateable copper diffusion barrier,' Applied Physics Letters, vol. 86, pp. 083104, 2005. [9] Chyan O., Arunagiri T.N., Ponnuswamy T., 'Electrodeposition of Copper Thin Film on Ruthenium,' J. Electrochem. Soc., vol. 150, pp. C347, 2003. [10] 陳怡秀, '化學機械研磨阻障層鉭與其電化學特性的研究,' 博士論文, 臺灣大學, 2010. [11] Tsai T.H., Wu Y.F., Yen S.C., 'Glycolic acid in hydrogen peroxide-based slurry for enhancing copper chemical mechanical polishing,' Microelectronic Engineering, vol. 77, pp. 193-203, 2005. [12] Kaufman F.B., Thompson D.B., Broadie R.E., Jaso M.A., Guthrie W.L., Pearson D.J., Small M.B., 'Chemical-mechanical polishing for fabricating patterned W metal features as chip interconnects,' J. Electrochem. Soc., vol. 138, pp. 3460-3465, 1991. [13] Tsai T.H., Wu Y.F., Yen S.C., 'A study of copper chemical mechanical polishing in urea–hydrogen peroxide slurry by electrochemical impedance spectroscopy,' Applied Surface Science, vol. 214, pp. 120-135, 2003. [14] Pourbaix M., Atlas of Electochemical Equilibria in Aqueous Solutions, National Association of Corrosion Engineers, Houston, TX, 1974. [15] Gutmann R.J., Steigerwald J. M., You L., Price D. T., Neirynck J., Duquette D.J., Murarka S.P., 'Chemical-Mechanical Polishing of Copper with Oxide and Polymer Interlevel Dielectrics,' Thin Solid Films, vol. 270, pp. 596-600, 1995. [16] Carpio R., Farkas J., Jairath R., 'Initial Study on Copper CMP Slurry Chemistries,' Thin Solid Films, vol. 266, pp. 238-244, 1995. [17] Wang M.T., Tsai M.S., Liu C., Tseng W.T., Chang T.C., Chen M.C., 'Effects of Corrosion Environments on the Surface Finishing of Copper Chemical Mechanical Polishing,' Thin Solid Films, vol. 308, pp. 518-522, 1997. [18] Luo Q., Campbell D.R., Babu S.V., 'Stabilization of Aluminum Slurry for Chemical-Mechanical Polishing of Copper,' Langmuir, vol. 12, pp. 3563-3566, 1996. [19] Seiichi Kondo, Noriyuki Sakuma, Yoshio Homma, Naofumi Ohashi, 'Slurry Chemical Corrosion and Galvanic Corrosion during Copper Chemical Mechanical Polishing,' Japanese Journal of Applied Physics, vol. 39, pp. 6216-6222, 2000. [20] Hariharaputhiran. M., Zhang. J., Ramarajan. S., Keleher. J.J., Li. Y., Babu. S.V., 'Hydroxyl Radical Formation in H2O2-Amino Acid Mixtures and Chemical Mechanical Polishing of Copper,' J. Electrochem. Soc., vol. 147, pp. 3820-3826, 2000. [21] Tsai W.T., Lin S.R., Chen J.C., 'Electrochemical Behavior of Copper in Chemical-Mechanical Polishing Slurries,' Journal of Chinese Corrosion Engineering, vol. 17, pp. 103-112, 2003. [22] Kaufman V.B., Kistler R. C., 'Chemical mechanical polishing slurry useful for copper substrates,' US. Pat., 5, 954, 997, 1999. [23] Hu T.C., Chiu S.Y., Dai B.T., Tsai M.S., Tung I.C., Feng M.S., 'Nitric acid-based slurry with citric acid as an inhibitor for copper chemical mechanical polishing, ' Chem. Phys., vol. 61, pp. 169-171, 1999. [24] Zhang L., Raghavan S., Meikle S., Hudson G., 'Inhibition of Alumina Deposition during Tungsten Chemical Mechanical Planarization Through the Use of Citric Acid,' J. Electrochem. Soc., vol. 146, pp. 1442-1447, 1999. [25] Song M.G., Lee J.H., Lee Y.G., Koo J.H., 'Stabilization of Gamma Alumina Slurry for Chemical Mechanical Polishing of Copper,' Journal of Colloid and Interface Science, vol. 300, pp. 603-611, 2006. [26] Chen J.C., Tsai W.T., 'Effects of hydrogen peroxide and alumina on surface characteristics of copper chemical–mechanical polishing in citric acid slurries,' Materials Chemistry and Physics, vol. 87, pp. 387-393, 2004. [27] Eom D.H., Hong Y.K., Lee S.H., Park J.Y., Myung J.J., 'Passivation and Etching Behaviors of Copper Surface in Copper CMP Slurries,' J. Electrochem. Soc., pp. 226-236, 2002. [28] Eom D.H., Park J.G., Lee E.S., 'Effect of Organic Acids in Copper Chemical Mechanical Planarization Slurry on Slurry Stability and Particle Contamination on Copper Surfaces,' Japanese Journal of Applied Physics, vol. 41, pp. 1305-1310, 2002. [29] 吳怡葶, '銅的腐蝕研究與過硫酸銨研磨液對銅/釕化學機械研磨之效應,' 碩士論文, 臺灣大學, 2014. [30] 周宜欣, '釕的電沉積研究及過硫酸銨組成的研磨液對釕化學機械研磨之效應,' 碩士論文, 臺灣大學, 2013. [31] 蔡崇安, '銅/釕化學機械研磨之研磨墊與研磨液的電化學研究,' 碩士論文, 臺灣大學, 2015. [32] 洪啟哲, '有機添加劑和改變稀釋比例之化學機械研磨,' 碩士論文, 交通大學, 2004. [33] Bard A.J., Faulkner L.R., Leddy J., Zoski C.G., Electrochemical methods: fundamentals and applications, Wiley, New York, 1980. [34] Steigerwald J.M., Murarka S.P., Gutmann R.J., Chemical Mechanical Planarization of Microelectronic Materials, Wiley, New York, 1997. [35] Hu C.C., Huang Y.H., 'Cyclic voltammetric deposition of hydrous ruthenium oxide for electrochemical capacitors,' J. Electrochem. Soc., vol. 146, pp. 2465-2471, 1999. [36] Ken-ichi Fukui, Hiroshi Onishi, Yasuhiro Iwasawa, 'Atom-Resolved Image of the TiO2(110) Surface by Noncontact Atomic Force Microscopy,' Phys. Rev. Lett., vol. 79, 1997. [37] 李其紘, '原子力顯微鏡的基本介紹,' 科學研習月刊, vol. 25, 2013. [38] Vigier F., Gloaguen F., Le´ger J. M., Lamy C., 'Electrochemical and spontaneous deposition of ruthenium at platinum electrodes for methanol oxidation: an electrochemical quartz crystal microbalance study.,' Electrochimi. Acta., vol. 46, pp. 4331-4337, 2001. [39] Cui H., Park J.H., Park J.G., 'Corrosion Inhibitors in Sodium Periodate Slurry for Chemical Mechanical Planarization of Ruthenium Film,' ECS Journal of Solid State Science and Technology, vol. 2, pp. 71-75, 2013. [40] Cheng J., Wang T., Jiang L., Lu X., 'Surface characteristics of ruthenium in periodate-based slurry during chemical mechanical polishing,' Applied Surface Science, vol. 351, pp. 401-409, 2015. [41] Kim K.S., Winograd N., 'X-Ray Photoelectron Spectroscopic Studies of Ruthenium-Oxygen Surfaces,' Journal of Catalysis, vol.35, pp. 66-72, 1974. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67332 | - |
dc.description.abstract | 隨著積體電路中開始以銅導線製程取代鋁導線製程,為了克服銅導線容易擴散進入導線間質的缺點,使銅導線的擴散阻障層(Diffusion barrier layer)研究越來越多,釕金屬(Ru)做為擴散阻障層材料甚具潛力,其主要特色為在超薄厚度之下仍保有低阻值的效能。因此,本研究以釕作為銅導線之擴散阻障層,進行銅/釕化學機械研磨之電化學特性探討。
實驗中以定電流法將釕沉積於銅基材上,將釕視為銅之擴散阻障層進行後續化學機械研磨探討。使用鍍液組成為氯化釕(RuCl3)、鹽酸(HCl)、磺胺酸(NH2SO3H)及聚乙二醇(PEG),測試在不同鍍液溫度(40℃、50℃、60℃)和電流密度(-3 mA/cm2、-4 mA/cm2、-5 mA/cm2)條件下執行電沉積,綜合比較發現在50℃環境下配合電流密度為 -4 mA/cm2,能獲得最佳電流效率26%,再以X光電子能譜儀(XPS)和表面輪廓計證實鍍層為釕金屬與少許二氧化釕且鍍層厚度約為3.15 μm。後續化學機械研磨部分,主要探討添加檸檬酸於過氧化氫系統中,使用奈米二氧化矽研磨粒子,在低壓力約2 psi配合轉速100 rpm下,以直流極化技術分析銅與釕在各種不同組成比例的研磨液中的腐蝕電位與腐蝕電流,最後以場發射電子顯微鏡(FEG-SEM)和原子力顯微鏡(AFM)觀察銅/釕研磨前後表面形態與表面粗糙度,並以電化學分析方法探討影響磨後平坦度的主因。實驗發現在不含雙氧水之研磨液中加入1.0 wt.%的檸檬酸有較佳的銅/釕移除率比,此時,而銅和釕移除速率分別為9.87 nm/min和11.24 nm/min;又含5 wt.%的雙氧水系統中則在加入0.5 wt.%檸檬酸時能使銅/釕移除速率比最接近1,此時銅和釕移除速率分別為29.63 nm/min和27.59 nm/min,此兩組研磨液為最適合之銅/釕共同化學機械研磨的研磨液。 | zh_TW |
dc.description.abstract | The implementation of the copper metallization into semiconductor manufacturing requires a viable pattern definition process – chemical mechanical polishing (CMP) of copper and the diffusion barrier layer. In this study, ruthenium (Ru) has been chosen to be the diffusion barrier layer material, and its electrochemical characteristics has been investigated.
First, we investigated Ru electrodeposition on copper substrate at various temperatures (40℃, 50℃, 60℃) and current density (-3 mA/cm2, -4 mA/cm2, -5 mA/cm2). The chemicals for the acid-bath ruthenium electrochemical deposition were ruthenium(III) chloride (RuCl3), hydrochloric acid (HCl), sulfamic acid (NH2SO3H), and polyethylene glycol (PEG). The results showed that the optimum current efficiency was 26% with the current density of -4 mA/cm2 at 50℃, and then the X-ray photoelectron spectroscopy (XPS) and the surface profilometer showed that the coating was ruthenium with a little ruthenium dioxide and the film thickness was about 3.15 μm. In chemical mechanical polishing, the potentiodynamic polarization method was used to investigate the electrochemical characteristics of Cu/Ru. Then, copper and ruthenium corrosion mechanism were proposed, and their susceptibility with slurries were studied. The effects of hydrogen peroxide and citric acid on the metal removal rate, corrosion current and surface morphology of Cu/Ru in the slurry have been investigated. Field-emission gun scanning electron microscopy (FEG-SEM) and atomic forced microscopy (AFM) were used to observe the surface morphology and surface roughness of copper / ruthenium before and after CMP. It was found that the addition of 1.0 wt.% citric acid in the slurry without hydrogen peroxide had the best copper / ruthenium removal rate, and the removal rates of copper and ruthenium were 9.87 nm/min and 11.24 nm/min, respectively. However, for adding 0.5 wt.% citric acid in the slurry with 5 wt.% hydrogen peroxide, the removal rates of copper and ruthenium were 29.63 nm/min and 27.59 nm/min, respectively. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T01:28:10Z (GMT). No. of bitstreams: 1 ntu-106-R04524048-1.pdf: 4773490 bytes, checksum: f5b0543563b3d1c7a3741839943a7b43 (MD5) Previous issue date: 2017 | en |
dc.description.tableofcontents | 目錄
誌謝 I 摘要 II Abstract III 圖目錄 VII 表目錄 IX 第一章 緒論與文獻回顧 1 1-1 銅導線製程 1 1-2 阻障層介紹 5 1-3 化學機械研磨 9 1-4 研磨液文獻回顧 14 1-5 研究動機 18 第二章 電化學基本原理 20 2-1 旋轉盤電極(Rotating Disk Electrode)系統 20 2-2 三極式電化學系統 21 2-3 極化曲線理論與腐蝕電化學理論 23 2-4 電位-pH關係圖 25 第三章 實驗設備與方法 31 3-1 設備、儀器、藥品、耗材 31 3-2 實驗方法 33 3-2.1 銅片前處理 33 3-2.2 銅基材旋轉電極製備 33 3-2.3 釕電沉積之實驗裝置與方法 34 3-2.4 釕化學機械研磨之實驗裝置與方法 36 3-3 電化學分析 37 3-3.1 極化曲線量測 37 3-3.2 移除速率計算 37 3-4 表面分析 38 3-4.1 X射線光電子能譜儀(XPS) 38 3-4.2 原子力顯微鏡(AFM) 38 3-4.3 掃描式電子顯微鏡(SEM) 40 第四章 實驗結果與討論 42 4-1 釕之電化學沉積(Ru electrochemical deposition) 42 4-1.1 基材前處理 42 4-1.2 影響電流效率之因素 44 4-1.3 影響表面形態之因素 47 4-1.4 釕薄膜厚度量測 50 4-1.5 釕薄膜元素分析 52 4-2 化學機械研磨之實驗結果與討論 54 4-2.1 通入氧氣增加氧化能力法 54 4-2.2 檸檬酸濃度對研磨液之影響 62 第五章 結論 72 第六章 參考文獻 74 | |
dc.language.iso | zh-TW | |
dc.title | 雙氧水系統中銅/釕化學機械研磨之電化學特性研究 | zh_TW |
dc.title | The Study of Electrochemical Characteristics of Cu/Ru
CMP in Hydrogen Peroxide Systems | en |
dc.type | Thesis | |
dc.date.schoolyear | 105-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 蔡子萱,吳永富,周偉龍 | |
dc.subject.keyword | 釕,電沉積,化學機械研磨,過氧化氫系統,表面粗糙度, | zh_TW |
dc.subject.keyword | ruthenium,electrodeposition,hydrogen peroxide,surface roughness,chemical mechanical polishing, | en |
dc.relation.page | 78 | |
dc.identifier.doi | 10.6342/NTU201701550 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2017-08-07 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-1.pdf 目前未授權公開取用 | 4.66 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。