請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/65773
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 郭育良 | |
dc.contributor.author | Pin-Hsien Hsiung | en |
dc.contributor.author | 熊品銜 | zh_TW |
dc.date.accessioned | 2021-06-17T00:11:29Z | - |
dc.date.available | 2017-09-17 | |
dc.date.copyright | 2012-09-17 | |
dc.date.issued | 2012 | |
dc.date.submitted | 2012-07-12 | |
dc.identifier.citation | 參考文獻
Armstrong TJ, Foulke JA, Joseph BS, Goldstein SA. 1982. Investigation of Cumulative Trauma Disorders in A Poultry Processing Plant. J Am Ind Hyg Assoc. 43:103-16. BLS(Bureau of labor statistic). 2010. Occupational Outlook Handbook. 11 Edition. Bureau of Labor Statistics. 2009. U.S. Department of Labor, November 2000~2009:1-2. Buckle PW, & Devereux JJ. 2002. The nature of work-related neck and upper limb musculoskeletal disorders. Applied Ergonomics. 33:207-217. Cook TM, Rosecrance JC, Zimmermann CL. 1996. Work-related musculoskeletal disorders in bricklaying: A symptom and job factors survey and guidelines for improvements. Appl Occup Environ Hyg. 11:1335-1339. Coury HJ, Leo JA, Kumar S. 2000. International Journal of Industrial Ergonomics. 25:587-595. Choobineh A. et al. 2007. Musculoskeletal problems among workers of an Iranian rubber factory. J Occup Health. 49:23-418. Deakin JM, Stevenson JM, Vail GR, Nelson JM. 1994. The use of the Nordic Questionnaire in an industrial setting: a case study. Applied Ergonomics. 25:182-185. Dickinson CE, Campion K, Foster AF, Newman SJ, O’Rourke AMT, Thomas PG. 1992. Questionnaire development: anexamination of the Nordic Musculoskeletal Questionnaire. Applied Ergonomics. 23:197-201. Field Janet N. et al. 1980. Graphic Arts Manual . New York , NY : Arno Press, Mustards Publishing Corp. Gustafsson E, Hagberg M. (2003). Computer mouse use in two different hand positions: exposure, comfort, exertion and productivity. Applied Ergonomics. 34, 107-113. Hansson GA, Stal M, Moritz U. 2000. Upper extremely muscular load during machine milking. Int J Ind Ergonomics. 26:9-17. Institute Occupational Safety and Health (2010).IOSH http://www.iosh.gov.tw/Publish.aspx?cnid=16&p=1903 Bunn J. 2006. Work Related Upper Limb Disorders in the Printing Industry. Health & Safety Laboratory, HSL Harpur Hill Buxton, SK17 9JN. Kurorinka I, Johnson B, Kilbom A, et al. 1987. Standardized Nordic Questionnaire for the analysis of musculoskeletal symptoms. Applied Ergonomics. 18:233-237. Kesering WM, Stetson DS, Silverstein BA, Brouwer ML. 1993. A Checklist for Evaluating Ergonomic Risk Factors Associated with Upper Extremity Cumulative Trauma Disorders. Ergonomics. 36:807-831. Keyserling WM, Brouwer M, Silverstein BA. 1992. A Checklist for Evaluating Ergonomic Risk Factors Resulting from Awkward Postures of the Legs Trunk and Neck. International Journal of Ergonomics. 9:283-301. Kemmlert K. 1994. Labor Inspectorate Investigation for the Prevention of Occupational Musculo-Skeletal Injuries (Licentiate Thesis). National Institute of Occupational Health, Solna, Sweden. Killough MK. Crumpton LL. 1996. An investigation of cumulative trauma disorders in the construction industry. Industrial Ergonomics. 18:399-405. Kurorinka I, Johnson B, Kilbom A, Vinterberg H, Biering-Sorenson F, Anderson G, Jorgensen K. 1987. Standardized Nordic Questionnaire for the analysis of musculoskeletal symptoms. Applied Ergonomics. 18:233-237. Marley RJ. Kumar N. 1996. Animproved musculoskeletal discomfort assessment tool. International Journal of Industrial Ergonomics. 17:21-27. NIOSH(National Institute for Occupational Safety and Health). 1997. Musculoskeletal Disorders and Workplace Factors. (Publication no. 97-141), Cincinnati, Ohio: NIOSH. Occupational Safety and Health Administration. 1995. Draft: Instructions for Completing the Risk Factor Checklist. USA. 24-32. OSHA(2012),United States Department of labor. http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=UNIFIED_AGENDA&p_id=4481 Raanaas RK, Anderson D. 2008. A questionnaire survey of Norwegian taxi drivers’ musculoskeletal health, and work-related risk factors. International Journal of Industrial Ergonomics. 38:280-290. Suka M, Yoshida K. 2005. Musculoskeletal pain in Japan: prevalence and interference with daily activities. Mod Rheumatol. 15:41-47. Spielholz P, Silverstein BA, Morgan M, Checkoway H, Kaufman J. 2001. Comparison of self-report, video observation and direct measurement methods for upper extremity musculoskeletal disorder physical risk factors. Ergonomics. 44:588-613. SCIF. 2012. State compensation insurance fund in California. http://www.statefundca.com/ Silverstein B, Welp E, Nelson N, Kalat J. 1987. Claims incidence of work-related disorders of the upper extremities: Washington State, 1987 through 1995. Am J Pub Health. 88:1827-1833. Tyldealing B, Greve JI. 1996. Muscles, Nerves and Movement kinesiology in daily living, second edition. Blackwell Scientific Publications. 111-266. Putz-Anderson V. 1988. Cumulative trauma disorders: a manual for musculoskeletal diseases of the upper limbs. Taylor & Francis. Westgaard RH, Winkel J. 1997. Ergonomic intervention research for improved musculoskeletal health: a critical review. International Journal of Industrial Ergonomics. 20:463-500. Westgaard RH, Winkle J. 1996. Guidelines for occupational musculoskeletal load as a basis for intervention: a critical review. Applied Ergonomics. 127:79-88. 印刷研究中心. 2008. 印刷產業技術發展策略. 特定民生產業技術發展策略規劃執 行計畫-印刷產業. 2008/08/11/. 取自:http://www.ptri.org.tw/ 李光豐. 2008. 泥水業勞工肌肉骨骼不適之健康風險評估. 大仁科技大學碩士論文. 24-25. 行政院勞委工安全委員會勞工安全衛生研究所. 1998. 手工具使用與人因工程研討會-上肢重復性傷害成因. P12-14. 行政院勞工委員會勞工安全衛生研究所. 2003. 勞工肌肉骨骼傷害檢點技術手冊.勞工安全衛生技術叢書. IOSH92-T-049. 行政院勞委會勞工安全衛生研究所. 1998. 職業性下背痛預防手冊. 行政院勞工委員會. 2009. 職業安全衛生促進方案. 台北: 4-5. 行政院勞工委員會. 2008. 營造業勞工肌肉骨骼傷害之防治. 行政院勞委會勞工安全衛生研究所. 職業衛生教育訓練資源中心專業版簡報. 呂志維. 1999. 三種人因工程檢核表在半導體業之應用. 勞工安全衛生研究季刊. 第七卷四期. 李開偉. 2000. 實用人因工程學. 全華科技圖書有限公司. 台北:2000. 邱文科. 1991. 護理人員下背痛之人因工程研究. 南宏圖書有限公司. 林彥輝, 葉文裕, 陳志勇. 1999. 人因工程檢核表工作現場適用性研究. 勞工安全衛生研究季刊. 7(1):45-60. 林洛秀. 2003. 我國勞保職業病現今給付案例與行業之分佈情況. 勞工安全衛生 簡訊. 23:4-7. 吳桂琳. 2003. 學校廚務人員肌肉骨骼傷害與皮膚疾患調查. 碩士論文. 2003: 1-40. 林鳳英. 2011. 關鑑指標法(KIM)對台灣產業在肌肉骨骼危害防治上的可應用性. 朝陽科技大學工業工程管理系碩士論文. 21:1-2. 施國正. 2009. 媽媽手. 行政院衛生署竹東醫院. 網址: http://www.chut.doh.gov.tw/releaseRedirect.do?unitID=1&pageID=504, 2009/4/14. 美國勞工統計局. 2006-2007. 職業展望手冊(Occupational Outlook Handbook;OOH) 美國勞工統計局出版. 印刷機操作員. 249-1至249-4. 資料網站: http://www.cla.gov.tw/site/business/41761dc1/438a9c16/files/OOH.pdf 郭育良等. 2005. 職業病概論. 華杏叢書. 華杏出版股份有限公司. 張中一等. 2009. 台灣印刷業發展概況. 團法人印刷工業技術研究中心. 張清忠. 1999. 半島體機台人因工程安全檢核表設計與評估探討. 國立高雄醫學大學職業安全衛生研究所. 碩士論文. 未出版. 張嘉玫. 2007. 理容業上肢肌肉骨骼危害暴露量化分析. 朝陽科技大學工業工程 管理系碩士論文. 2007: 1-2. 張馨方. 2006. 美髮業肌肉骨骼疾患與呼吸道疾病之調查. 國立成功大學醫學院環境醫學研究所碩士論文. 1-26. 徐儆暉, 李諭昇. 2008. 工作環境安全衛生狀況認知調查-2007年. 行政院勞員會勞工安全衛生研究所. 96~97. 施蒨蒨. 2011. 中華民國環境職業醫學論壇. 出席瑞典國際職業衛生學會(ICOH) 報告. 取自: http://www.pcc.vghtpe.gov.tw/old/docms/a10432.htm 2011 殷歆宜. 2009. 檳榔包填作業勞工肌肉骨骼傷害之調查. 碩士論文. 2009: 7-12. 陳明正. 2006. 某食品廠作業員肌肉骨骼不適症狀主觀感受與工作改善. 雲林科技大學工業工程與管理研究所論文. 2006: 1-2. 陳明山, 陳志勇. 2006. 看護人員肌肉骨骼傷害調查與作業方法改善. 行政院勞工委員會勞工安全衛生研究所. 台北. 陳怡如. 2000. 護理人員肌肉骨骼不適之評估. 碩士論文. 21:1-2. 陳協慶. 2004. 作業場所上肢重複性傷害現場監測技術評估探討. 行政院勞委會勞工安全衛生研究所. 出版日期:2004年01月. 陳協慶. 2005. 製造業上肢肌肉骨骼危害暴露研究. 行政院勞工委員會勞工安全衛生研究所委託研究報告. IOSH93-H103. 陳春萬, 陳志勇. 2004. 營造工人肌肉骨骼痠痛與工作場所危害因子關係探討. 勞工安全衛生研究季刊. 60-72. 許勝雄, 彭游, 吳水丕. 1996. 人因工程第二版. 滄海書局. 317-376. 許勝雄, 陳元和. 1996. 人機界面安全衛生設計規範研究-非動力手工具與輔助設 備. 台北市:行政院勞委會勞工安全衛生研究所. 梁蕙雯. 2004. 簡介職業相關肌肉骨骼傷病. 工業安全科技. 第五十期. 2004年3月. 盛啟峰. 2003. 作業場所上肢重複性傷害現場監測技術評估探討. 朝陽科技大學碩士論文. 2010: 1-2. 黃麗娟. 2002. 臺灣圖文傳播科技發展歷程之研究. 臺灣師範大學圖文傳播學系碩士論文. 2002年6月. 勞工衛生研究所. 2009. 飯店房務清潔人員要小心肌肉骨骼酸痛. 勞保局統計資料. 褚幸雯. 2010. 製鞋業作業員肌肉骨骼危害之人因研究. 碩士論文. 2010:1-4. 鄒勝峰, 王祿旺. 2006. 台灣印刷產業創新競爭力之研究. 印刷科技 第22卷第一 期 99. 台北. 葉文裕, 林彥輝. 1997. 工作現場人因工程檢核表示用性之研究. 行政院勞員會勞工安全衛生研究所. IOSH86-H329. 葉忠. 2004. 科技管理. 製商整合科技教育改進計畫. 93年12月15日.取自: http://140.134.72.152/ebrc/edu/plan4/plan4_course/%AC%EC%A7%DE%BA%DE%B2z.pdf 潘儀聰. 2009. 人因工程工作現場設施改善技術應用研究. 勞工安全衛生簡訊. 95:5-8. 潘儀聰. 2011. 人因工程改善一舉數得. 勞工安全衛生簡訊. 105:9-11. 戴基福. 2001. 職業骨骼肌肉傷害及其預防. 工業安全衛生月刊. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/65773 | - |
dc.description.abstract | 印刷製造業是台灣重要的中小企業。印刷機操作員因長時間的工作與站立,且需大量搬運重物,加上不良姿勢與上肢重複性動作等,是造成工作潛在的危險因子,極易釀成肌肉骨骼不適,影響工作效能,亟需加以重視。本研究之目的在探討我國印刷廠平版印刷機操作員肌肉骨骼傷病盛行率,以及工作中肌肉骨骼的危害因子,做為未來政府與產業相關單位政策實施與工作改善之參考。
本研究為橫斷性研究,進行問卷調查,以台灣北、中、南各三家印刷廠,共計六家印刷工廠之印中工作人員為對象,共發出問卷153份,回收有效問卷138份中有91位屬平版印刷機操作員,對照組群為47位,實施北歐肌肉骨骼問卷調查表(NMQ)、人因工程檢核表(MSDs)等,對肌肉骨骼不適症狀調查,所獲得之數據再以卡方檢定、單變量邏輯斯迴歸與多變量邏輯斯迴歸,並校正年齡、工作年資、BMI因子、運動與吸菸,分析暴露危險因子與肌肉骨骼不適症狀之相關性。在肌肉骨骼問卷(NMQ)方面發現,印刷機操作員自述問卷中無論在上肢部位(頸部、肩部、手肘、手腕、上背)或下背後腰與下肢部位(臀部、膝部、小腿、腳踝)較行政人員多肌肉骨骼不適症狀,其中印刷機操作員在下背後腰感到不適比例最高有75%自評有不適,其次為頸部有71%,第三為手腕有66%。用肌肉骨骼傷害人因工程檢點表(MSDs)檢核結果,評估上下肢部位危險因子以邏輯斯迴歸分析統計方法,並校正年齡、工作年資、BMI因子、運動與吸菸,以四組人員(二手、裁切人員、領機和行政人員)主訴各部位肌肉骨骼不適程度(包含:酸、疼痛、麻木)評分為應變項,分別將上肢及下肢各部位危險因子為自變項探討,可得到在工作中有不當姿勢:下背後腰不當姿勢:身體前俯大於20度,身體前府大於45度,長時間站立無支撐,推/拉重物,下背後腰分別β值為0.10(0.05~0.15)P-value為0.0002。在手部施力上,抓握超過4.5kg。不當姿勢:手腕前彎大於20度;背彎大於30度和右手腕與左手腕有相關,右手腕與左手腕分別OR為0.14(0.06-0.22)P-value為0.0005、OR為0.17 (0.09-0.25) P-value為0.0001;左右手肘重複性作業:鍵盤輸入作業和其他類工作交雜,其他工作量佔50%~75%和右手肘和左手肘有相關,OR為0.10(0.001-0.20)P-value為0.048、OR為0.08(0.023-0.14)P-value為0.007。本研究更進一步採美國密西根大學(University of Michigan)三度空間力學評估程式(3D SSPP)發現,三組印刷機操作員和行政人員背部受力之結果分別為:1)二手與裁切人員每秒平均搬運背部受力為3267牛頓;2)裁切人員每秒平均搬運背部受力為2799牛頓;3)領機每秒平均搬運背部受力為2525牛頓;4)行政人員每秒平均搬運背部受力為705牛頓。 整體而言,印刷機操作員有高比例之肌肉骨骼不適問題,應改善印刷機操作人員在上肢部位或背部與下肢部位的肌肉骨骼不適症狀。建議後續研究者應從人因工程設計及個人保護去預防此肌肉骨骼不適問題。 | zh_TW |
dc.description.abstract | Printing industry is an important medium and small enterprise in Taiwan. Printing press workers work and stand for a long time and move lots of heavy stuff during their daily job routine. Besides, they work with faulty posture and repetitive upper limb actions. These are potential dangerous factors for work which may cause musculoskeletal disorders and influence working effectiveness. We have to pay attention to these factors. The purpose of this research lies in discussing the prevalence of musculoskeletal disorders suffered by offset printing press workers in domestic printing factories. In addition, the research discusses the hazard factors for working muscle and bone. It will serve as a reference for the implementation of policies and improvement of working environments used by governmental and industrial organizations in the future.
This research is a cross-sectional research with questionnaires. The objects are printing press workers from 6 printing factories, three in northern, middle, and southern Taiwan respectively. Totally 153 questionnaires are issued and 138 effective questionnaires are returned. Among them, there are 91 printing press workers of which 47 administrative groups are in the contrast group. We survey musculoskeletal disorders through Nordic Musculoskeletal Questionnaire (NMQ) and MSDs check list. The obtained figures are checked by Chi-square test, univariate logistic regression, and multivariate logistic regression. Then we correct ages, working experiences, BMI factors, exercise, and smoking, analyzing the correlation between the exposure to hazard factors and the musculoskeletal disorders. Results of the Nordic Musculoskeletal Questionnaire (NMQ) show that printing press workers complained about more musculoskeletal disorder (i.e., sores, pains and numbness) than administrative workers either in the upper limbs (neck, shoulders, elbows, wrists and upper back) or in the lower back/lower limbs (buttocks, knees, shanks, ankles). The printing press workers reported the highest percentage, or 75%, of discomforts in the lower back, followed by 71% of neck discomforts and 66% of wrist discomfort. The results were examined using a Musculoskeletal Disorders (MSDs) Checklist, with the upper/lower limb risk factors evaluated in a logistic regression analysis and the respondents’ data (i.e., age, superiority on job, BMI factor, exercise and smoking) adjusted. The dependent variables were the degree of musculoskeletal disorder (i.e., soars, pains and numbness) in each body part complained and rated by four groups of respondents (assistants, cutters, lead operators and administrative workers) while the independent variables were the risk factors in parts of upper/lower limbs. The respondents’ improper postures while working were derived from the analysis. Firstly, improper postures regarding the lower back included body bent forward more than 20 degrees, body bent forward more than 45 degrees, standing for long periods of time without support, and pushing/pulling weights, with a 0.10 (0.05-0.15) β-value and a 0.0002 P-value for the lower back. While the respondents had hand-grip strength of averagely 4.5 kilograms, the improper postures regarding hands/wrists included wrists bent forward more than 20 degrees and the back bent more than 30 degrees, which were proved statistically related to the right and left wrists, given the 0.14 (0.06-0.22) OR and 0.0005 P-value for the right wrist, and the 0.17 (0.09-0.25) OR and 0.0001 P-value for the left. As for the repetitive tasks performed by both elbows, a task that mixes keyboard-enabled data entry with other miscellaneous tasks, and miscellaneous tasks that account for 50%-75% of the workload proved statistically related to the right/left elbow, with a 0.10 (0.001-0.20) OR and a 0.048 P-value; a 0.08 (0.023-0.14) OR and a 0.007 P-value, respectively. This research further adopts 3D SSPP developed by University of Michigan, USA. We found the back loading results of three groups of printing press workers and administrative personnel are as follows: 1) each time of moving by helper will cause the back loading of 3267 N; 2) each time of moving by cutters will cause the back loading of 2799 N; 3) each time of moving by press operator will cause the back loading of 2525 N; 4) each time of moving by administrative personnel will cause the back loading of 705 N. Generally speaking, the majority of printing press workers suffers from the musculoskeletal disorders. We should figure out how to improve the situation of their musculoskeletal disorders of upper limb, lower back, waist, and lower limb. This research suggests future researchers pay attention to the designing of ergonomics and personal protection for the prevention of musculoskeletal disorders in the future. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T00:11:29Z (GMT). No. of bitstreams: 1 ntu-101-R98841017-1.pdf: 6044404 bytes, checksum: 66d4cebcfb2921fe62a5b835c2a8fb13 (MD5) Previous issue date: 2012 | en |
dc.description.tableofcontents | 總 目 錄
口試委員會審查書………………………………………………………………... I 謝誌……………………………………………………………………………….. II 中文摘要……………………………………………………………....................... III 英文摘要…………………………………………………………………………. V 總目錄……………………………………………………………………………. .. VIII 圖目錄……………………………………………………………………………. X 表目錄……………………………………………………………………………. XII 第一章 緒論……………………………………………………………….…….. 1 第一節 前言………………………………………………………………… 1 第二節 研究背景與動機…………………………………………………… 2 第三節 研究目的…………………………………………………………… 5 第二章 文獻回顧………………………..……………………………………….. 6 第一節 發生肌肉骨骼傷害部位之疾病…………………………………… 6 第二節 發生肌肉骨骼傷害成因與定義…………………………………… 7 第三節 職業類別肌肉骨骼傷害影響..……..……………………………… 8 第四節 各職業族群之職業傷病與肌肉骨骼危害發率…………………… 10 第五節 印刷產業定義與工作內容………………………………………… 11 第六節 人因工程危險因子之意義及其構成因素………………………… 12 第七節 肌肉骨骼的評估工具……………………………………………… 13 第三章 研究方法與架構………………………………………………………… 16 第一節 研究架構…………………………………………………………… 16 第二節 研究對象…………………………………………………………… 16 第三節 研究方法………………..………………………………………….. 17 第四節 研究材料與工具…………………………………………………… 17 第五節 統計分析…………………………………………………………… 20 第四章 研究結果………………………………………………………………… 22 第一節 基本資料…………………………………………………………… 22 第二節 工作環境現場拍攝簡介…………………………………………… 22 第三節 自述肌肉骨骼不適之結果………………………………………… 25 第四節 以人因工程檢核表(MSDs)評估上下肢部位危險因子………… 27 第五節 腰椎受力之生物力學評估(3D-SSPP) .…………………………… 27 第六節 3D-SSPP 椎間盤受力與MSDs 檢核表比較之結果………………… 32 第七節 MSDs 檢核結果與自述各部位肌肉骨骼不適之相關性………........ 33 第八節 印刷機操作員和行政人員(N=138)下背後腰NMQ 自述肌肉骨骼不適與 3D-SSPP 椎間盤受力比較(4 SEGs 二手、裁切人員、領 機、行政人員)之結 果…………………………………………………………………………… 35 第五章 討論……………………………………………………………………… 36 第一節 研究對象的探討…………………………………………………… 36 第二節 工作暴露的部份…………………………………………………… 37 第三節 肌肉骨骼的部……………………………………………………… 37 第四節 研究限制…………………………………………………………… 42 第六章 結論與建議……………………………………………………………… 43 第一節 結論………………………………………………………………… 43 第二節 建議………………………………………………………………… 43 參考文獻.…………………………………………………………………….…… 46 表/附錄.……………...……………………………………………………………. 49 34 圖目錄 圖1-1.印刷工廠印中平版印刷機生產動線示意流程圖………………………….. 4 圖2-1 資料來源:2005年美國勞工部勞工局職業傷害統計報告比例圖..……... 8 圖2-4 常見之印刷原料紙張置放、拆封、裁紙、整紙動作程序圖示…………… 11 圖2-5 常見之印刷原料紙張置放、拆封、裁紙、整紙動作程序圖示…………… 11 圖2-6 常見之印刷原料紙張置放、拆封、裁紙、整紙動作程序圖示…………… 11 圖2-7 常見之印刷人員拖紙、理紙、疊紙、翻面等動作流程圖示…………….. 11 圖2-8 常見之印刷人員拖紙、理紙、疊紙、翻面等動作流程圖示…………….. 11 圖2-9 常見之印刷人員拖紙、理紙、疊紙、翻面等動作流程圖示…………..… 11 圖2-10 常見之印刷人員拖紙、理紙、疊紙、翻面等動作流程圖示…………… 11 圖2-11 常見之印刷人員拖紙、理紙、疊紙、翻面等動作流程圖示…………… 11 圖2-12 NMQ 之九大部位人體示意圖…………………………………………… 14 圖3-1 研究流程圖………………………………………………………………. 16 圖4-1 SA公司印中平版印刷人員(二手) 工作示意圖………………………..… 22 圖4-2 SA公司印中平版印刷人員(二手) 工作示意圖………………………..… 22 圖4-3 SA公司印中平版印刷人員(裁切人員)工作示意圖…………………..… 23 圖4-4 SA公司印中平版印刷人員(裁切人員)工作示意圖…………………..… 23 圖4-5 SA公司印中平版印刷人員(裁切人員)工作示意圖…………………..… 23 圖4-6 SA公司印中平版印刷人員(二手)整紙例行工作示意圖……………..… 23 圖4-7 SA 公司印中平版印刷人員(二手)整紙例行工作示意圖…………….... 23 圖4-8 SA 公司印中平版印刷人員(二手)整紙例行工作示意圖…………….…. 23 圖4-9 SA 公司印中平版印刷人員(二手)整紙例行工作示意圖…………….... 23 圖4-10 SA公司平版印刷人員(二手)雙手將紙張抬送至印刷機進紙區示意圖 .. 24 圖4-11SA公司平版印刷人員(二手)雙手將紙張抬送至印刷機進紙區示意圖. 24 圖4-12 SA公司平版印刷人員(二手)雙手將紙張抬送至印刷機進紙區示意圖. 24 圖4-13 SA公司平版印刷人員(二手)雙手將紙張抬送至印刷機進紙區示意圖. 24 圖4-14 SA公司平版印刷人員(二手)進行理紙工作示意圖……………………. 24 圖4-15 SA公司平版印刷人員(二手)進行理紙工作示意圖……………………. 24 圖4-16 SA公司平版印刷人員(二手)進行理紙工作示意圖……………………. 24 XI 圖4-17 第一面印刷完成後拖運至進紙區準備翻印另一面示意圖…………… 25 圖4-18 第一面印刷完成後拖運至進紙區準備翻印另一面示意圖………….. 25 圖4-19 SA公司平版印刷人員(領機)工作示意圖…………………………..… 25 圖4-20 SA公司平版印刷人員(領機)工作示意圖…………………………..… 25 圖4-21 SA公司平版印刷人員(領機)工作示意圖…………………………..… 25 圖4-22 SA印刷加工完成品示意圖…………………………………………….. 25 圖4-23 印刷機操作員(二手)搬運姿勢……………………………………….. 27 圖4-24 印刷機操作員(二手)搬運姿勢……………………………………….. 28 圖4-25 刷機操作員(二手)搬運姿勢…………………………………………… 28 圖4-26 刷機操作員(裁切人員)搬運、裁紙姿勢………………………………. 29 圖4-27 刷機操作員(裁切人員)搬運、裁紙姿勢………………………………. 29 圖4-28 刷機操作員(領機)調色、調機姿勢……………………………………. 30 圖4-29 刷機操作員(領機)調色、調機姿勢…………………………………… 30 圖4-30 政人員………………………………………………………………...….. 32 圖4-31 3D-SSPP 椎間盤受力與MSDs 檢核表比較之結果…………………..….. 32 圖 4-32 D-SSPP 椎間盤受力與MSDs 檢核表比較之結果……………………… 32 圖 4-33 印刷機操作員和行政人員(N=138)下背後腰NMQ 自述肌肉骨骼不適與 3D-SSPP 椎間盤受力比較(4 SEGs 二手、裁切人員、領 機、行政人員)之結果34 圖 4-34 刷機操作員和行政人員(N=138)下背後腰NMQ 自述肌肉骨骼不適與 3D-SSPP 椎間盤受力比較(4 SEGs 二手、裁切人員、領 機、行政人員)之結果35 31 表目錄 表2-1 2008 年全美職業類別肌肉骨骼傷害發生案件與傷假排行(部分)統計表.9 表2-2 2001-2008 全美印刷工人因肌肉骨骼傷害休假日統計表……….……… 9 表4-1 3D-SSPP 印刷廠員工(四組人員)搬運腰椎之受力表格. ………………… 31 分析表 表1 印刷機操作員與行政人員之描述性統計……………………………….…. 50 表2 印刷機操作員和行政人員兩組間肌肉骨骼不適的症狀(包含:酸、疼痛、 麻木)程度比較………………………………………………………………….… 51 表3 印刷機操作員和行政人員兩組間肌肉骨骼不適症狀(包含:酸、疼痛、麻 木)比較……………………………………………………………….…………... 53 表4 印刷機操作員和行政人員兩組間肌肉骨骼不適症狀(包含:酸、疼痛、麻 木)平均分數比較(Continuous) ……………………………….…………..…..…. 54 表5 印刷機操作人員九大部位肌肉骨骼不適百分比與其他職業比較……..... 55 表6 二手之MSDs 人因工程檢核表(N=4)三組印刷操操作員和行政人員 MSDs 平均數……………………………………………….………………..…… 56 表7 裁切人員之MSDs 人因工程檢核表(N=4)三組印刷操操作員和行政人員MSDs 平均分數…………………………………………………….…………………… 58 表8 領機之MSDS 人因工程檢核表(N=4)三組印刷操操作員和行政人員 MSDs 平均數………………………………….…………………………….…… 60 表9 行政人員之MSDS 人因工程檢核表(N=4)三組印刷操操作員和行政人員MSDs 平均分數………………………………………… …………………………….. 62 表10 工作相關危險因子評分(Continuous)與各部位肌肉骨骼不適(包含:酸、 疼痛、麻木)部位發生與否(categorical)之相關性………………………...... 64 63 | |
dc.language.iso | zh-TW | |
dc.title | 台灣印刷工業平版印刷機操作人員肌肉骨骼不適盛行率與危害因子之探討 | zh_TW |
dc.title | A Study of Musculoskeletal Symptoms Prevalence and Human Factor Hazards for Printing Press Workers | en |
dc.type | Thesis | |
dc.date.schoolyear | 100-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃耀輝,游志雲,陳志勇 | |
dc.subject.keyword | 印刷機操作員,肌肉骨骼傷病盛行率,暴露危險因子,橫斷性研究,三度空間力學評估程式,人因工程, | zh_TW |
dc.subject.keyword | printing press workers,prevalence of musculoskeletal disorders,exposure to dangerous factors,cross-sectional research,3D SSPP,human factors engineering, | en |
dc.relation.page | 71 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2012-07-12 | |
dc.contributor.author-college | 公共衛生學院 | zh_TW |
dc.contributor.author-dept | 職業醫學與工業衛生研究所 | zh_TW |
顯示於系所單位: | 職業醫學與工業衛生研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 5.9 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。