請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/64839
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 田維誠(Wei-Cheng Tian) | |
dc.contributor.author | Chao-Hung Chou | en |
dc.contributor.author | 周昭宏 | zh_TW |
dc.date.accessioned | 2021-06-16T23:01:13Z | - |
dc.date.available | 2015-08-10 | |
dc.date.copyright | 2012-08-10 | |
dc.date.issued | 2012 | |
dc.date.submitted | 2012-08-07 | |
dc.identifier.citation | [1] '2011 statistics of causes of death,' Department of Health, Ed., ed. Republic of China (Taiwan), 2012.
[2] R. A. Weinberg, The biology of cancer. New York: Garland Science, 2007. [3] Biomarkers Definitions Working Group, 'Biomarkers and surrogate endpoints: preferred definitions and conceptual framework,' vol. 69, ed. Clinical Pharmacology & Therapeutics, 2001, pp. 89-95. [4] P. K. Mashir A, Laskowski D, Dweik RA, 'Medical applications of exhaled breath analysis and testing,' PCCSU, vol. 25, 2011. [5] W. Cao and Y. Duan, 'Breath analysis: potential for clinical diagnosis and exposure assessment,' Clin Chem, vol. 52, pp. 800-11, 2006. [6] B. Buszewski, M. Kesy, T. Ligor, and A. Amann, 'Human exhaled air analytics: biomarkers of diseases,' Biomed Chromatogr, vol. 21, pp. 553-66, 2007. [7] S. A. Kharitonov and P. J. Barnes, 'Exhaled markers of pulmonary disease,' Am J Respir Crit Care Med, vol. 163, pp. 1693-722, 2001. [8] M. Phillips, R. N. Cataneo, B. A. Ditkoff, P. Fisher, J. Greenberg, R. Gunawardena, C. S. Kwon, F. Rahbari-Oskoui, and C. Wong, 'Volatile markers of breast cancer in the breath,' Breast J, vol. 9, pp. 184-91, 2003. [9] S. K. Kim, H. Chang, and E. T. Zellers, 'Prototype micro gas chromatograph for breath biomarkers of respiratory disease,' in Solid-State Sensors, Actuators and Microsystems Conference, 2009. TRANSDUCERS 2009. International, 2009, pp. 128-131. [10] K. Richard, M. Curtis, and W. Chung-Nin Channy, 'Gas Chromatography on Microchips,' in Separation Methods In Microanalytical Systems, ed: CRC Press, 2005, pp. 319-358. [11] T. L. Tsu, 'Structure and Property Characterization of Porous TiO2 Films Prepared by Sol-Gel Technique,' Master thesis, Department of Materials Science & Engineering, Feng Chia University, 2006. [12] D. E. Williams, 'Oxide Gas Sensors,' in Encyclopedia of Materials: Science and Technology (Second Edition), K. H. J. B. Editors-in-Chief: , W. C. Robert, C. F. Merton, I. Bernard, J. K. Edward, M. Subhash, and V. Patrick, Eds., ed Oxford: Elsevier, 2001, pp. 6609-6613. [13] S. Lin, D. Li, J. Wu, X. Li, and S. A. Akbar, 'A selective room temperature formaldehyde gas sensor using TiO2 nanotube arrays,' Sensors and Actuators B: Chemical, vol. 156, pp. 505-509, 2011. [14] A. Helwig, G. Muller, G. Sberveglieri, and M. Eickhoff, 'On the Low-Temperature Response of Semiconductor Gas Sensors,' Journal of Sensors, 2009. [15] K. S. Kim, W. H. Baek, J. M. Kim, T. S. Yoon, H. H. Lee, C. J. Kang, and Y. S. Kim, 'A Nanopore Structured High Performance Toluene Gas Sensor Made by Nanoimprinting Method,' Sensors, vol. 10, pp. 765-774, 2010. [16] S. W. Fan, A. K. Srivastava, and V. P. Dravid, 'Nanopatterned polycrystalline ZnO for room temperature gas sensing,' Sensors and Actuators B-Chemical, vol. 144, pp. 159-163, 2010. [17] 詹佳樺, '溶膠-凝膠法製備聚甲基丙烯酸甲酯 / 二氧化矽混成體之研究,' 碩士論文, 化學工程研究所, 國立中央大學, 2001. [18] J. M. Radecka M., Klich-Kafel J., Rękas M., Łysoń B., Czapla A., Lubecka M., Sokołowski M., Zakrzewska K., Heel A., Graule T.J., 'TiO2-based Nanopowders for Gas Sensor,' Ceramic Materials, vol. 62, pp. 545-549 2010. [19] A. L. Linsebigler, G. Lu, and J. T. Yates, 'Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results,' Chemical Reviews, vol. 95, pp. 735-758, 1995. [20] D. Kim, 'Influence of calcination temperature on structural and optical properties of TiO2 thin films prepared by sol–gel dip coating,' Materials Letters, vol. 57, pp. 355-360, 2002. [21] Y.-C. Lin, 'A Study of Surface Wetting Sustainability on Transparent TiO2/ SiO2 Nanoparticulate Thin Films with Self-Cleaning Property,' Master thesis, Department of Chemical Engineering, National Cheng Kung University 2009. [22] G. K. Mor, M. A. Carvalho, O. K. Varghese, M. V. Pishko, and C. A. Grimes, 'A room-temperature TiO2-nanotube hydrogen sensor able to self-clean photoactively from environmental contamination,' Journal of Materials Research, vol. 19, pp. 628-634, 2004. [23] G. F. Fine, L. M. Cavanagh, A. Afonja, and R. Binions, 'Metal oxide semi-conductor gas sensors in environmental monitoring,' Sensors (Basel), vol. 10, pp. 5469-502, 2010. [24] H. P. Jina Choi, Michael R. Hoffmann, 'Combinatorial doping of TiO2 with platinum (Pt), chromium (Cr), vanadium (V), and nickel (Ni) to achieve enhanced photocatalytic activity with visible light irradiation,' Journal of Materials Research, vol. 25, pp. 149-158, 2009. [25] 李英群, 謝志誠, and 李冠霖, '石英基材之奈米加工技術及其在壓印上的應用,' 農業機械學刊, vol. 15, pp. 23-29, 2006. [26] M. A. Ponce, R. Parra, R. Savu, E. Joanni, P. R. Bueno, M. Cilense, J. A. Varela, and M. S. Castro, 'Impedance spectroscopy analysis of TiO2 thin film gas sensors obtained from water-based anatase colloids,' Sensors and Actuators B: Chemical, vol. 139, pp. 447-452, 2009. [27] C. Suresh, V. Biju, P. Mukundan, and K. G. K. Warrier, 'Anatase to rutile transformation in sol-gel titania by modification of precursor,' Polyhedron, vol. 17, pp. 3131-3135, 1998. [28] Z. Zulkaenain and L. C. Yong, 'Properties of Sol-Gel Derived TiO2 Thin Films Prepared with Different Dip-Coating Layers ' MATERIALS SCIENCE (MEDŽIAGOTYRA), vol. 11, 2005. [29] C.-H. Chen, 'Development of TiO2 Nanowire Detectors Fabricated by Electron Beam Lithography Technology,' Master Thesis, Graduate Institute of Biomedical Electronic and Bioinformatics, National Taiwan University, 2011. [30] Z. Chen and C. Lu, 'Humidity sensors: A review of materials and mechanisms,' Sensor Letters, vol. 3, pp. 274-295, 2005. [31] E. Traversa, 'Ceramic Sensors for Humidity Detection - the State-of-the-Art and Future-Developments,' Sensors and Actuators B-Chemical, vol. 23, pp. 135-156, 1995. [32] E. C. Dickey, O. K. Varghese, K. G. Ong, D. W. Gong, M. Paulose, and C. A. Grimes, 'Room temperature ammonia and humidity sensing using highly ordered nanoporous alumina films,' Sensors, vol. 2, pp. 91-110, 2002. [33] G. Garcia-Belmonte, V. Kytin, T. Dittrich, and J. Bisquert, 'Effect of humidity on the ac conductivity of nanoporous TiO2,' Journal of Applied Physics, vol. 94, pp. 5261-5264, 2003. [34] R. Wang, K. Hashimoto, A. Fujishima, M. Chikuni, E. Kojima, A. Kitamura, M. Shimohigoshi, and T. Watanabe, 'Light-induced amphiphilic surfaces,' Nature, vol. 388, pp. 431-432, 1997. [35] K. Hashimoto, H. Irie, and A. Fujishima, 'TiO2 photocatalysis: A historical overview and future prospects,' Japanese Journal of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers, vol. 44, pp. 8269-8285, 2005. [36] N. Sakai, A. Fujishima, T. Watanabe, and K. Hashimoto, 'Quantitative Evaluation of the Photoinduced Hydrophilic Conversion Properties of TiO2 Thin Film Surfaces by the Reciprocal of Contact Angle,' The Journal of Physical Chemistry B, vol. 107, pp. 1028-1035, 2003. [37] H. O. Seo, K.-D. Kim, Y. Luo, M. J. Kim, N. K. Dey, and Y. D. Kim, 'Interaction of TiO2 Films on Carbon Fibers with Toluene,' Bulletin of the Korean Chemical Society, vol. 31, pp. 2333 - 2336, 2010. [38] A. M. Gaur, R. Joshi, and M. Kumar, 'Deposition of Doped TiO2 Thin Film by Sol Gel Technique and its Characterization: A Review ' Proceedings of The World Congress on Engineering, pp. 1500-1503, 2011. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/64839 | - |
dc.description.abstract | 本研究提出一個氣相層析技術後端偵測器的設計。利用金屬氧化物半導體氣體感測器使用壽命長,高靈敏度,適用多氣體偵測的特點,從Prof. Helwig提出金屬氧化物薄膜表面吸附水膜可用於在常溫環境偵測酸性,鹼性與短鏈醇類氣體分子的游離氣體感測機制出發,製作常溫操作的二氧化鈦薄膜氣體感測器。
本研究結合傳統微機電製程與溶膠凝膠法,以圖形化光阻作為金(Au)濕蝕刻阻擋層,在蒸鍍金的熱氧化矽晶片上,製作感測用的指叉電極。溶膠凝膠法混合作為溶劑的去離子水,作為催化劑的冰醋酸,與作為先驅物的異丙氧化鈦(titanium isopropoxide, TIP) ,配置薄膜生成材料,靜置待水解、縮合反應完成後產生透明的二氧化鈦溶膠。接著在指叉電極間隙塗布溶膠,熱處理後生成二氧化鈦感測薄膜。 實驗時將晶片裝置在氣相層析儀分離管柱末端,以乾燥空氣作為載子氣體(carrier gas)推動待測氣體樣品使其在管柱中分離成氣體帶,依序與二氧化鈦偵測薄膜接觸,產生訊號。從量測訊號發現,本研究製作的二氧化鈦偵測薄膜在常溫環境可偵測到文獻所載酸,鹼性水解氣體與短鏈醇類之外,更多樣的氣體種類。感測器經過紫外光的照射後,可使小分子量酯類、乙醚結構、甲苯分子的訊號更清晰。 | zh_TW |
dc.description.abstract | In this study, the design of an end point detector for gas chromatography (GC) system was developed. The metal oxide (MOX) semiconductor type gas sensor was chose because of its long life time, high sensitivity and broad selectivity. Starting from Prof. Helwig’s dissociative gas sensing mechanism, adsorbed water layers on the metal oxide surface assisted the detection of acidic gases, basic gases and short chain alcohols at room temperature. This study focused on the development of a room-temperature-operated gas sensor with the titanium dioxide sensing film by the chemical solution process.
Sensors were fabricated by the combination of both conventional micro electro mechanical systems (MEMS) technology and the sol gel method. Gold metal layer deposited on thermally oxidized silicon wafer was patterned by lithography. With photoresisit were used as stop layer of wet etch process to gold, exposing interdigit electrodes on silicon subtract. To prepare materials used for the formation of the sol, the deionized water used as solvent, the acetic acid served as catalyst, the titanium isopropoxide, (TIP) utilized as precursor, were mixed. After the hydrolysis reaction and condensation reaction are done, the transparent TiO2 sol was formed. The sol was deposited on gaps between interdigit electrodes of the sensor. With the high temperature annealing, sol was transformed into TiO2 sensing film. To characterize the sensor performances, the sensor was placed at the end point of the separation column of a GC system. Dry air was utilized as the carrier gas to push the sample mixture through the column, separated into bands and was detected by the TiO2 film of the sensor at the outlet of the column. It is found that the TiO2 film has the capability to detect more types of gas molecules than previously reported acidic gases, basic gases and short chain alcohols at room temperature. With or after the irradiation of ultraviolet light, signals of esters with a small molecular weight, molecule with ether-like structure and toluene are clear to distinguish. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T23:01:13Z (GMT). No. of bitstreams: 1 ntu-101-R99943064-1.pdf: 5981728 bytes, checksum: 6b96d07fbb8b3e2038992180727b0777 (MD5) Previous issue date: 2012 | en |
dc.description.tableofcontents | 致謝 I
中文摘要 II ABSTRACT III 目錄 V 圖目錄 VIII 表目錄 XII 第一章 緒論 1 1.1 研究背景 1 1.1.1 惡性腫瘤 2 1.1.2 生物標的 3 1.1.3 氣相層析 5 1.1.4 氣體感測器 6 1.1.5二氧化鈦半導體感測器 7 1.2 研究目標 9 1.3 低溫氣體感測器研究回顧 10 1.4 論文概貌 13 第二章 感測薄膜與感測機制 14 2.1 溶膠凝膠法 14 2.1.1 以金屬烷氧化物為先驅物 14 2.1.2影響溶膠凝膠反應的因素 16 2.2 二氧化鈦材料特性 18 2.3 游離氣體感測機制 20 2.3.1 固體表面吸附的多層水膜 20 2.3.2 以能階解釋二氧化鈦薄膜 22 2.4 二氧化鈦光催化反應 24 第三章 感測器元件製程 25 3.1 晶片平台 26 3.1.1 電子束蒸鍍 26 3.1.2 微影 26 3.1.3 晶圓切割 28 3.2 二氧化鈦溶膠 30 3.2.1 實驗用藥品 30 3.2.2溶膠的配製 30 3.3 薄膜塗布 32 3.3.1 浸漬覆膜 32 第四章 感測器特性量測結果與討論 36 4.1 氣體感測系統架設 36 4.1.1 封裝 36 4.1.2 測試用藥品 37 4.1.3樣品配置 38 4.1.4 訊號轉換電路 39 4.2 感測器特性量測 40 4.2.1 水氣的影響 41 4.2.2 醇類分子的感測 43 4.2.3 環境水氣含量對訊號的影響 49 4.2.4 紫外線對感測特性的影響 50 4.3 結果討論 57 4.3.1 水氣的影響 57 4.3.2 醇類的感測 59 4.3.3 UV的影響 61 第五章 結論與未來方向 63 5.1 結論 63 5.2 未來方向 64 參考文獻 65 | |
dc.language.iso | zh-TW | |
dc.title | 化學液體成膜的紫外光激二氧化鈦氣體感測器 | zh_TW |
dc.title | Ultraviolet-activated Titanium Dioxide based Gas Sensor by Chemical Solution Process | en |
dc.type | Thesis | |
dc.date.schoolyear | 100-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 呂家榮(Chia-Jung Lu),徐振哲(Cheng-Che Hsu) | |
dc.subject.keyword | 二氧化鈦,氣體感測器,氣相層析,溶膠凝膠法,常溫操作, | zh_TW |
dc.subject.keyword | titanium dioxide,gas sensor,chromatography,sol-gel method,room temperature operation, | en |
dc.relation.page | 68 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2012-08-07 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電子工程學研究所 | zh_TW |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 5.84 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。