請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63836
標題: | 以壓控振盪器為基礎且具線性校正技術之三角積分調變器 Linearization Techniques for VCO-Based Delta-Sigma Modulator |
作者: | Shou-Chen Hsu 許守鎮 |
指導教授: | 林宗賢(Tsung-Hsien Lin) |
關鍵字: | 壓控振盪器,三角積分器, VCO,Delta-Sigma Modulator, |
出版年 : | 2012 |
學位: | 碩士 |
摘要: | 本論文提出如何校正以壓控振盪器為基礎之三角積分器所面臨的非線性影響,特別是校正諧波所導致整體效能的降低。在本論文中,以壓控震盪器為基礎之三角積分器皆為開路操作,雖然開路操作可以避免掉穩定度還有迴授補償延遲的問題,但在整個系統所產生的非理想效應皆會直接的反應在輸出而導致整體效能降低,在所有的非理想效應之中,以壓控震盪器所產生的諧波失真最為嚴重,所以本論文的重心也將就諧波失真的問題進行探討,並提出解決方法。
本論文使用兩種不同的方法來矯正非線性效應的影響-其一前景矯正,使用一測試信號來偵測輸入到輸出的變化,從而導出非線性的係數並加以還原。其二為背景矯正,使用一參考三角積分器來達到矯正非線性的目的。 兩者皆為使用台積電90 nm互補式金氧半製程所實現,使用500 MHz的取樣頻率在10 MHz的頻寬,1.2伏特的供應電源時,分別消耗20毫瓦跟12毫瓦的功率 This thesis presents two calibration techniques to address the linearity issue in VCO-based delta-sigma modulator. Unlike conventional delta-sigma modulator, the VCO-based delta-sigma modulator operates in a open-loop manner which avoids the stability and excess loop delay (ELD) issues. However, the non-linear effect is not suppressed by the loop as it affects output directly. Among all the non-linear effects, the harmonic distortion from VCO is the worst and needs to be addressed. The first technique utilizes the foreground calibration to recover the distorted output signal. The nonlinearity is detected by sending a fixed input pattern. In the second technique, the background calibration is presented. The nonlinearity of VCO is corrected based on the additional reference ADC. These two techniques are implemented in a TSMC 90-nm CMOS process. The system bandwidth is designed 10 MHz with 500 MHz sampling frequency. The implemented modulator dissipate 20 mW and 12 mW respectively from a 1.2-V supply. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63836 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 3.49 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。