請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/61618
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊申語(Sen-Yeu Yang) | |
dc.contributor.author | Tai-Hsiang Liao | en |
dc.contributor.author | 廖泰翔 | zh_TW |
dc.date.accessioned | 2021-06-16T13:07:29Z | - |
dc.date.available | 2015-08-06 | |
dc.date.copyright | 2013-08-06 | |
dc.date.issued | 2013 | |
dc.date.submitted | 2013-08-01 | |
dc.identifier.citation | [1] C. A. Rowe-Taitt, J. W. Hazzard, K. E. Hoffman, J. J. Cras, J. P. Golden and F. S. Ligler, “Simultaneous detection of six biohazardous agents using a planar waveguide array biosensor”, Biosensors and Bioelectronics, Vol. 15, pp. 579-589 (2000)
[2] 張哲豪,流體微熱壓製程開發研究,國立台灣大學博士論文,民國93年6月。 [3] A. Firouzi, D. Kumar, L. M. Bull, T. Besier, P. Sieger, Q. Huo, S. A. Walker, J. A. Zazadzinski, C. Glinka, J. Nicol, D. Margolese, G. D. Stucky and B. F. Chmelka, “Cooperative Organization of Inorganic-Surfactant and Biomimetic Assemblies”, Science, Vol. 267,No. 5201, pp. 1138-1143 (1995) [4] J. Homola, S. S. Yee and G. Gauglitz, “Surfaceplasmonresonance sensors- review”, Sensors and Actuators B, Vol. 54, pp. 3-15 (1999) [5] P. O. Markgren, M. Hamalainen and U. H. Danielson, “Screening of compounds interacting with HIV-1 proteinase using optical biosensor technology”, Analytical Biochemistry, Vol. 265, pp. 340-350 (1998) [6] G. Zeder-Lutz, A. R. Neurath, and M. H. V. Regenmortel, “Kinetics of interaction between 3-hydroxyphthaloyl-beta-lactoglobulin and CD4 molecules”, Biologicals, Vol. 27, pp. 29-34 (1999) [7] E. Kretschmann and H. Raether, “Radiative decay of non-radiative surface plamons excited by light”, Zeitschrift Fuer Naturforschumg, Vol. 23A, pp. 2135-2136 (1968) [8] M. G. Moharam and T. K. Gaylord, “Rigorous coupled-wave analysis of metallic surface-relief gratings”, Journal of the Optical Society of America A,Vol. 3, pp. 1780-1787 (1986) [9] J. A. Miragliotta, J. L. Sample and S. J. Papadakis, “Characterization of SERS substrates for Chem/Bio Processing Systems”, SPIE Proceedings, Vol. 5927, pp. 1-9 (2005) [10] S. M. Leeds, T. J. Davis, P. W. May, C. D. O. Pickard and M. N. R. Ashfold, “Use of different excitation wavelengths for the analysis of CVD diamond by laser Raman spectroscopy”, Diamond and Related Materials, Vol. 7, pp. 233-237 (1998) [11] T. Lopz-Rios, E. Sandre, S. Leclercq and E. Sauvain, “Polyacetylene in Diamond Films Evidenced by Surface Enhanced Raman Scattering”, Physical Review Letters, Vol. 76, Issue 26, pp. 4935-4938 (1996) [12] T.W. Ebbesen, H.J. Lezec, H.F. Ghaemi, T. Thio and P.A. Wolff, “Extraordinary optical transmission through sub-wavelength hole arrays”, Nature, Vol. 391, pp. 667-669 (1997) [13] Y. B. Zheng, L. Jensen, W. Yan, T. R. Walker, B. K. Juluri, L. Jensen and T. J. Huang, “Chemically tuning the localized surface plasmon resonances of gold nanostructure arrays”, The Journal of Physical Chemistry C, Vol. 113, pp. 7019-7024 (2009) [14] A.V. Kabashin, P. Evans, S. Pastkovsky, W. Hendren, G.A. Wurtz, R. Atkinson, R. Pollard, V.A. Podolskiy and A.V. Zayzts, “Plasmonic nanorod metamaterials for biosensing” Nature materials, Vol.8, pp. 867-871 (2009) [15] K.L. Lee, P.W. Chen, S.H. Wu, J.B. Huang, S.Y. Yang and P.K. Wei, “Enhancing Surface Plasmon Detection Using Template-Stripped Gold Nanoslit Arrays on Plastic Films”, ACS nano, Vol. 6, pp. 2931-2939 (2012) [16] M. Fleischmann, P. J. Hendra and A. J. McQuillan, “Raman spectra of pyridine adsorbed at a silver electrode”, Chemical Physics Letters, Vol. 26, pp. 163-166 (1974) [17] Q. Yu, P. Guan, D. Qin, G. Golden and P. M. Wallace, “Inverted Size-Dependence of Surface-Emhanced Raman Scattering on Gold Nanohole and Nanodisk Arrays”, Nano Letters, Vol. 8, No. 7, pp. 1923-1928 (2008) [18] C. Wang, W. Ruan, N. Ji, W. Ji, S. Lv, C. Zhao and B. Zhao, “Preparation of Nanoscale Ag Semishell Array with Tunable Interparticle Distance and Its Application in Surface-Enhanced Raman Scattering”, The Journal of Physical Chemistry C, Vol. 114, pp. 2886-2890 (2010) [19] H.Y. Wu, C.J. Choi and B.T. Cunningham, “Plasmonic Nanogap-Enhanced Raman Scattering Using a Resonant Nanodome Array”, small, Vol. 8, No. 18, pp. 2878-2885 (2012) [20] S.Y. Chou, P.R. Krauss and P.J. Renstrom, “Nanoimprint lithography”, American Vacuum Society Technol. B, Vol. 14, Issue 6, pp. 4129-4133 (1996) [21] S. Y. Chou, C. Keimel and J. Gu, “Ultrafast and direct imprint of nanostructures in silicon”, Nature, Vol. 417, Issue 6891, pp. 835-837 (2002) [22] L. J. Heyderman, B. Ketterer, D. Bachle, F. Glaus, B. Haas, H. Schift, K. Vogelsang, J. Gobrecht, L. Tiefenauer, O. Dubochet, P. Surbled and T. Hessler, “High volume fabrication of customised nanopore membrane chips”, Microelectronic Engineering, Vol. 67-68, pp. 208-213 (2003). [23] A. Pepin, P. Youinou, V. Studer, A. Lebib and Y. Chen, “Nanoimprint lithography for the fabrication of DNA electrophoresis chips”, Microelectronic Engineering, Vol. 61-62, pp. 927-932 (2002) [24] J. H. Chang and S. Y. Yang, “Gas Pressurized Hot Embossing for Transcription of Micro-features”, Microsystem Technologies, Vol. 10, pp. 76-80 (2003) [25] B. Vratzov, A. Fuchs, M. Lemme, W. Henschel, and H. Kurz, “Large scale ultraviolet-based nanoimprint lithography”, Journal of Vacuum Science and Technology B, Vol. 21 ,pp.2760-2764 (2003) [26] H. Gao, H. Tan, W. Zhang, K. Morton and S. Y. Chou, “Air cushion press for excellent uniformity, high yield, and fast nanoimprint across a 100 mm field”, Nano letters, Vol. 6, pp. 2438-2441 (2006) [27] H. Masuda and K. Fukuda, “Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina”, Science, Vol. 268, pp.1466-1468 (1995) [28] J. P. O’sullivan and G. C. Wood, “The morphology and mechanism of formation of porous anodic films on aluminium”, Proceedings of the Royal Society of London, Vol. 317, pp. 511-543. (1970) [29] O. Jessensky, F. Muller and U. Gosele, “Self-organized formation of hexagonal pore arrays in anodic alumina”, Applied Physics Letters, Vol. 72, No. 10, pp. 1173-1175 (1998) [30] F. Keller, M. S. Hunter and D. L. Robinson, “Structural Features of Oxide Coatings on Aluminum”, Journal of the Electrochemical Society, Vol. 100, Issue 9, pp. 411-419 (1953) [31] M. Fleishmann and P. Hendra, “Raman spectra of pyridine adsorbed at a silver electrode”, Chemical Physics Letters, Vol. 26, pp.163-166 (1974) [32] X. Wang and G.R. Han, “Fabrication and characterization of anodic aluminum oxide template”, Microelectronic Engineering, Vol. 66, pp. 166 (2003) [33] J.F. Aebersold, P.A. Stadelmann and M. Matlosz, “A rotating disk electropolishing technique for TEM sample preparation”, Ultramicroscopy, Vol. 62, pp. 157-169 (1996) [34] L. He, M. J. Natan and C. D. Keating, “Surface-Enhanced Raman Scattering: A Structure-Specific Detection Method for Capillary Electrophoresis”, Analytical Chemistry, Vol. 72, pp. 5348-5355 (2000) [35] J. Gersten and A. Nitzan, “Electromagnetic theory of enhanced Raman scattering by molecules adsorbed on rough surfaces”, The Journal of Chemical Physics, Vol. 73, pp. 3023-3027 (1980) [36] R.C. Jorgenson and S.S. Yee, “A fiber-optic chemical sensor based on surface plasmon resonance”, Sensors and Actuators B, Vol. 12, pp. 213-220 (1993) [37] L. Liu, M. Shao, L. Cheng, S. Zhuo, R. Que and S.T. Lee, “Edge-enhanced Raman scattering effect from Au deposited nanoedge array”, Applied Physics Letters, Vol. 98, Issue 7, pp. 073114-073114-3 (2011) [38] A. Michota and J. Bukowska, “Surface-enhanced Raman scattering (SERS) of 4-mercaptobenzoic acid on silver and gold substrates”, Journal of Raman Spectroscopy, Vol. 34, pp. 21-25 (2003) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/61618 | - |
dc.description.abstract | 高產量、低成本的生醫檢測元件為生醫產業重要的課題;但現行的光學檢測元件,其奈米結構大多仰賴電子束或離子束等加工方式,加工時間長且昂貴。本研究結合陽極氧化鋁奈米孔洞模具及氣體輔助熱壓成型技術,於PC基材表面製作出奈米結構,以達到快速且低成本的需求,並探討其於表面電漿共振以及表面增強拉曼散射等兩種檢測技術之應用。
本研究製作陽極氧化鋁(AAO)模具,以不同的外加電壓搭配所需之電解液製得不同的奈米孔洞間距,並以擴孔時間來控制孔洞直徑。使用氣體輔助熱壓成型技術將高分子PC基材均勻的充填於模具中,製作出奈米柱狀結構,配合離子鍍金機可製作出金奈米柱狀結構與金奈米管狀結構並應用於生醫檢測。 在表面電漿共振方面,檢測中須使用稜鏡使光發生全反射並激發電漿子,而此稜鏡常使得儀器的架設較昂貴且複雜。本研究提出使用具有V-cut微結構之電鑄鎳模具對PC基材進行熱壓,製作出V-cut微結構以取代該稜鏡,在PC基材的另一面鍍上的金,以自組裝之量測儀器進行量測,量測結果與理論值相符合,當入射角在41°至45°之間皆可激發表面電漿共振。 在表面增強拉曼散射方面,由於奈米等級的粗糙金屬表面可以增強拉曼散射的訊號強度,而若奈米結構的間距越靠近,其增強的效果越佳。將鍍了金的陽極氧化鋁模具使用氣體輔助熱壓技術將金轉印至PC基材表面可製得金奈米管狀結構。本研究提出使用氧電漿清潔機蝕刻奈米管中之PC奈米柱,製作出更複雜之奈米結構,以進一步提升表面增強拉曼散射之效果。檢測對-巰基苯甲酸(p-mercaptobenoic acid,PMBA)的拉曼散射光譜,使用氧電漿蝕刻後之拉曼訊號比蝕刻前提升了將近一倍。 | zh_TW |
dc.description.abstract | Fabricating productive and low-cost biosensor has been an important issue in bio-field. However, most of the nanostructures of the biosensors are fabricated by E-beam or focused ion-beam, which is expensive and time-consuming. This study presents a fast and low-cost approach, combining anodic aluminum oxide (AAO) mold and gas-assisted hot embossing to fabricate nanostructures on the surface of polycarbonate (PC). Furthermore, the applications in surface plasmon resonance (SPR) and surface-enhanced Raman spectroscopy (SERS) are demonstrated.
The nano-holes array AAO molds with different pitches were fabricated via two-step anodization with different voltages, and the size of the diameter of the nanoholes can be controlled by the widening time. For the application in SPR, the prism makes the measure instruments more complicated and expensive. This study presents that fabricating V-cut microstructure on the surface of PC and sputtering 50 nm gold on the other side to substitute the prism to simplify the measure instrument. The measured spectrum is conformed to the theory of Prism coupler metal layer analyte. When the incident angle is between 41° to 45°, there is an extra dip appeared around 700 nm. For the application in SERS, previous studies have shown that if the pitch of nanostructures gets smaller, the enhancement will be stronger. In this study, a novel method to fabricate nanostructure is adopted. First, 50 nm gold is sputtered on the surface of the AAO mold, the gold-coated micro/nanostructure is transferred to PC by using gas-assisted hot embossing. Gold-coated nanotubes on the surface of PC are obtained. After that, plasma cleansing is used to etch the PC nanopillars in the gold nanotubes. Then 20 nm gold is sputtered to cover the nanostructures. After immersing the nanostructures in aqueous solutions of p-mercaptobenzoic acid (PMBA), the SERS spectrum showed that the morphology of the nanostructures further enhances the SERS performance. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T13:07:29Z (GMT). No. of bitstreams: 1 ntu-102-R00522730-1.pdf: 5346001 bytes, checksum: a7a9958fccc8130367955bdddfebaad9 (MD5) Previous issue date: 2013 | en |
dc.description.tableofcontents | 誌謝 I
摘要 II ABSTRACT III 目錄 V 圖目錄 VIII 表目錄 X 第一章 導論 1 1.1前言 1 1.2奈米結構應用於生醫檢測 1 1.3奈米結構加工方式 1 1.3.1 傳統微熱壓成型 2 1.3.2 流體微熱壓成型 3 1.4陽極氧化鋁製作奈米結構 3 1.5研究方向與目標 4 1.6論文內容與架構 4 第二章 文獻回顧 10 2.1生醫檢測元件介紹 10 2.1.1 表面電漿共振應用於生醫檢測元件之發展 11 2.1.2 拉曼散射應用於生醫檢測元件之發展 12 2.2奈米壓印技術 13 2.3氣體輔助加壓技術 14 2.4陽極氧化鋁 15 2.4.1 陽極氧化鋁發展之相關文獻 15 2.4.2 多孔性陽極氧化鋁結構製作 17 第三章 實驗設置與實驗方法 24 3.1 實驗目的及整體流程規劃 24 3.2 製作陽極氧化鋁模具之設備 24 3.2.1 陽極氧化鋁製程之材料 24 3.2.2 陽極氧化電解槽與低溫循環系統 24 3.2.3 抽風櫥櫃 25 3.2.4 加溫磁石攪拌器 25 3.2.5 直流電壓供應器 25 3.2.6 陽極氧化鋁之製作流程 25 3.3氣體輔助熱壓製程 27 3.3.1 氣體輔助壓印設備 27 3.3.2 壓印製程步驟 28 3.4量測設備 29 3.4.1 場發射電子顯微鏡(FE-SEM) 29 3.4.2 離子鍍金機 29 3.4.3 反射光譜量測系統 30 3.4.4 表面輪廓儀 30 3.4.5 氧電漿清潔機 30 3.4.6 拉曼散射量測系統 30 第四章 陽極氧化鋁模具製作 40 4.1鋁試片準備 40 4.1.1 鋁材的選用 40 4.1.2 鋁材的熱處理 40 4.1.3 鋁材的拋光 41 4.2陽極氧化鋁模具製作流程 41 4.2.1 電化學拋光 41 4.2.2 第一次陽極處理 42 4.2.3 移除氧化鋁 42 4.2.4 第二次陽極處理 42 4.2.5 擴孔 43 4.3 陽極氧化鋁模具製作結果探討 43 4.4 本章結論 44 第五章 表面電漿共振元件之製作與探討 52 5.1研究背景 52 5.2表面電漿共振試片之製作 53 5.2.1 實驗目標 53 5.2.2 實驗流程 54 5.3實驗結果與量測 55 5.3.1 微、奈米結構之複製效果 55 5.3.2 SPR效果之量測與參數探討 55 5.4 本章結論 57 第六章 表面增強拉曼散射元件之製作與探討 67 6.1表面增強拉曼散射試片之製作 67 6.1.1實驗目標 67 6.1.2實驗流程 67 6.1.3 陽極氧化鋁模具鍍金熱壓轉印 68 6.1.4 氧電漿清潔機蝕刻奈米結構 68 6.1.5 鍍金覆蓋試片表面 69 6.2實驗結果與量測 69 6.2.1鍍金轉印之結果探討 69 6.2.2氧電漿蝕刻之結果 70 6.3 表面增強拉曼散射效果之量測與探討 70 6.3.1 SERS效果與均勻性之檢測 71 6.3.2結構尺寸、蝕刻時間與鍍金厚度對SERS效果之檢測 72 6.4 本章結論 73 第七章 論文總結與未來研究方向 88 7.1論文總結 88 7.1.1 陽極氧化鋁模具製作 88 7.1.2 表面電漿共振元件之製作 88 7.1.3 表面增強拉曼散射元件之製作 89 7.2未來研究方向 89 參考文獻 91 | |
dc.language.iso | zh-TW | |
dc.title | 氣體輔助熱壓陽極氧化鋁模具製作生醫檢測元件之研究 | zh_TW |
dc.title | Fabrication of Biosensor Components by Using Gas-Assisted Hot Embossing and AAO Mold | en |
dc.type | Thesis | |
dc.date.schoolyear | 101-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 魏培坤(Pei-Kuen Wei),劉士榮 | |
dc.subject.keyword | 氣體輔助熱壓,陽極氧化鋁,表面電漿共振,表面增強拉曼散射, | zh_TW |
dc.subject.keyword | gas-assisted hot embossing,anodic aluminum oxide,surface plasmon resonance,surface-enhanced Raman spectroscopy, | en |
dc.relation.page | 94 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2013-08-01 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 5.22 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。