請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60805
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人(Jer-Ren Yang) | |
dc.contributor.author | Yo-Shiuan Lin | en |
dc.contributor.author | 林佑諠 | zh_TW |
dc.date.accessioned | 2021-06-16T10:30:58Z | - |
dc.date.available | 2020-07-22 | |
dc.date.copyright | 2020-07-22 | |
dc.date.issued | 2020 | |
dc.date.submitted | 2020-07-02 | |
dc.identifier.citation | [1] B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Microstructural development in equiatomic multicomponent alloys, Materials Science and Engineering: A 375-377 (2004) 213-218. [2] S.-K.C. Jien-Wei Yeh, Su-Jien Lin, Jon-Yiew Gan, Tsung-Shune Chin, Tao-Tsung Shun, Chun-Huei Tsau, and Shou-Yi Chang, Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Advanced Engineering Materials (2004). [3] D.B. Miracle, O.N. Senkov, A critical review of high entropy alloys and related concepts, Acta Materialia 122 (2017) 448-511. [4] M. Beyramali Kivy, M. Asle Zaeem, Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys, Scripta Materialia 139 (2017) 83-86. [5] F. Otto, Y. Yang, H. Bei, E.P. George, Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys, Acta Materialia 61(7) (2013) 2628-2638. [6] C.-J. Tong, Y.-L. Chen, J.-W. Yeh, S.-J. Lin, S.-K. Chen, T.-T. Shun, C.-H. Tsau, S.-Y. Chang, Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metallurgical and Materials Transactions A 36(4) (2005) 881-893. [7] C.-Y. Hsu, J.-W. Yeh, S.-K. Chen, T.-T. Shun, Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition, Metallurgical and Materials Transactions A 35(5) (2004) 1465-1469. [8] O.N. Senkov, G.B. Wilks, J.M. Scott, D.B. Miracle, Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys, Intermetallics 19(5) (2011) 698-706. [9] O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, P.K. Liaw, Refractory high-entropy alloys, Intermetallics 18(9) (2010) 1758-1765. [10] O.N. Senkov, J.M. Scott, S.V. Senkova, F. Meisenkothen, D.B. Miracle, C.F. Woodward, Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy, Journal of Materials Science 47(9) (2012) 4062-4074. [11] O.N. Senkov, J.M. Scott, S.V. Senkova, D.B. Miracle, C.F. Woodward, Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy, Journal of Alloys and Compounds 509(20) (2011) 6043-6048. [12] H.Y. Diao, R. Feng, K.A. Dahmen, P.K. Liaw, Fundamental deformation behavior in high-entropy alloys: An overview, Current Opinion in Solid State Materials Science 21(5) (2017) 252-266. [13] B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, R.O. Ritchie, A fracture-resistant high-entropy alloy for cryogenic applications, Science 345(6201) (2014) 1153-1158. [14] J.-W. Yeh, Alloy Design Strategies and Future Trends in High-Entropy Alloys, Jom 65(12) (2013) 1759-1771. [15] J.-W. Yeh, Recent progress in high-entropy alloys, European Journal of Control - EUR J CONTROL 31 (2006) 633-648. [16] C.J. Tong, Y.L. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, C.H. Tsau, S.J. Lin, S.Y. Chang, Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 36A(4) (2005) 881-893. [17] N. Kumar, Y. Qiu, X. Nie, R. Mishra, Z. Tang, P. Liaw, R. Brennan, K. Doherty, K. Cho, High Strain-Rate Compressive Deformation Behavior of the Al0.1CrFeCoNi High Entropy Alloy, Materials and Design 86 (2015) 598. [18] S.J.J.W. RA, p. Sons, Thermodynamics of solids, 178 (1972). [19] K.-Y. Tsai, M.-H. Tsai, J.-W.J.A.M. Yeh, Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys, 61(13) (2013) 4887-4897. [20] Y.T. Zhu, X.Z. Liao, X.L. Wu, Deformation twinning in nanocrystalline materials, Progress in Materials Science 57(1) (2012) 1-62. [21] H.J.I.o.M. Bhadeshia, London, Geometry of crystals, (2001). [22] C.S.P. S. Mahjan, M. A. Imam, B. B. Rath, Formation of annealing twins in f.c.c. crystals, Acta Metallurgica 45 (1997) 2633-2638. [23] H. Gleiter, The formation of annealing twins, Acta Metallurgica 17 (1969). [24] N.B. S. Dash, An investigate of the origin and growth of annealing twins Aacta Metallurgica 11 (1963). [25] L.E.M. M. A. Meyers, A model for the formaton of annealing twins in FCC metals and alloys, Acta Metallurgica 26 (1978). [26] L. Hsin-Yi, Studies on nanostructure for annealing twin in α-brass and transformation twin in high-carbonic martensite, Department of Materials Science and Engineering, National Taiwan University, 2010. [27] K. Ming, X. Bi, J. Wang, Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures, International Journal of Plasticity 113 (2019) 255-268. [28] G. Laplanche, A. Kostka, O.M. Horst, G. Eggeler, E.P. George, Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy, Acta Materialia 118 (2016) 152-163. [29] J.A. Venables, Deformation twinning in face-centred cubic metals, 6(63) (1961) 379-396 %J Philosophical Magazine. [30] M.S. Christian JW, Deformation twinning, Progress in Materials Science 39 (1995). [31] B.C. De Cooman, Y. Estrin, S.K. Kim, Twinning-induced plasticity (TWIP) steels, Acta Materialia 142 (2018) 283-362. [32] M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, Q. Xue, Shear localization in dynamic deformation of materials: microstructural evolution and self-organization, Materials Science and Engineering: A 317(1) (2001) 204-225. [33] S.F. Liu, Y. Wu, H.T. Wang, J.Y. He, J.B. Liu, C.X. Chen, X.J. Liu, H. Wang, Z.P. Lu, Stacking fault energy of face-centered-cubic high entropy alloys, Intermetallics 93 (2018) 269-273. [34] Z. Wu, H. Bei, G.M. Pharr, E.P. George, Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures, Acta Materialia 81 (2014) 428-441. [35] T.H. Blewitt, R.R. Coltman, J.K. Redman, Low‐Temperature Deformation of Copper Single Crystals, Journal of Applied Physics 28(6) (1957) 651-660. [36] S. Zhao, G.M. Stocks, Y. Zhang, Stacking fault energies of face-centered cubic concentrated solid solution alloys, Acta Materialia 134 (2017) 334-345. [37] S. Huang, W. Li, S. Lu, F. Tian, J. Shen, E. Holmström, L. Vitos, Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy, Scripta Materialia 108 (2015) 44-47. [38] Y. Zhang, Y. Zhuang, A. Hu, J.-J. Kai, C.T. Liu, The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys, Scripta Materialia 130 (2017) 96-99. [39] F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, E.P. George, The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy, Acta Materialia 61(15) (2013) 5743-5755. [40] J.D. Campbell, W.G. Ferguson, The temperature and strain-rate dependence of the shear strength of mild steel, Philosophical Magazine 21(169) (2006) 63-82. [41] J.M. Park, J. Moon, J.W. Bae, M.J. Jang, J. Park, S. Lee, H.S. Kim, Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy, Materials Science and Engineering: A 719 (2018) 155-163. [42] W. Huo, H. Zhou, F. Fang, X. Hu, Z. Xie, J. Jiang, Strain-rate effect upon the tensile behavior of CoCrFeNi high-entropy alloys, Materials Science and Engineering: A 689 (2017) 366-369. [43] U.S. Lindholm, High strain rate tests, Measurement of mechanical properties vol. 5 (1971) 199-271. [44] M.A. Meyers, U.R. Andrade, A.H. Chokshi, The effect of grain size on the high-strain, high-strain-rate behavior of copper, Metallurgical and Materials Transactions A 26(11) (1995) 2881-2893. [45] E. El-Danaf, S.R. Kalidindi, R.D. Doherty, Influence of grain size and stacking-fault energy on deformation twinning in fcc metals, Metallurgical and Materials Transactions A 30(5) (1999) 1223-1233. [46] X.Z. Liao, Y.H. Zhao, Y.T. Zhu, R.Z. Valiev, D.V. Gunderov, Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion, Journal of Applied Physics 96(1) (2004) 636-640. [47] W.F. Smith, J. Hashemi, F. Presuel-Moreno, Foundations of materials science and engineering, Mcgraw-Hill Publishing2006. [48] L. Remy, Kinetics of fcc deformation twinning and its relationship to stress-strain behaviour, Acta Metallurgica 26(3) (1978) 443-451. [49] Q. Lin, J. Liu, X. An, H. Wang, Y. Zhang, X. Liao, Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy, Materials Research Letters 6(4) (2018) 236-243. [50] G. Dini, A. Najafizadeh, R. Ueji, S.M. Monir-Vaghefi, Improved tensile properties of partially recrystallized submicron grained TWIP steel, Materials Letters 64(1) (2010) 15-18. [51] Y.H. Jo, S. Jung, W.M. Choi, S.S. Sohn, H.S. Kim, B.J. Lee, N.J. Kim, S. Lee, Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy, Nat Commun 8 (2017) 15719. [52] C.E. Slone, J. Miao, E.P. George, M.J. Mills, Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures, Acta Materialia 165 (2019) 496-507. [53] E. Ma, T. Zhu, Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals, Materials Today 20(6) (2017) 323-331. [54] M.A. Meyers, Dynamic behavior of materials, John wiley sons1994. [55] S.-P. Tsai, Y.-T. Tsai, Y.-W. Chen, P.-J. Chen, P.-H. Chiu, C.-Y. Chen, W.-S. Lee, J.-W. Yeh, J.-R. Yang, High-entropy CoCrFeMnNi alloy subjected to high-strain-rate compressive deformation, Materials Characterization 147 (2019) 193-198. [56] W. Wu, M. Song, S. Ni, J. Wang, Y. Liu, B. Liu, X. Liao, Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion, Sci Rep 7 (2017) 46720. [57] Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M. Saran, T.C. Lowe, Ultrafine Grained Materials II, John Wiley Sons2013. [58] X. Wu, N. Tao, Y. Hong, G. Liu, B. Xu, J. Lu, K. Lu, Strain-induced grain refinement of cobalt during surface mechanical attrition treatment, Acta Materialia 53(3) (2005) 681-691. [59] H. Zhang, Z. Hei, G. Liu, J. Lu, K. Lu, Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment, Acta materialia 51(7) (2003) 1871-1881. [60] N. Tao, K. Lu, Nanoscale structural refinement via deformation twinning in face-centered cubic metals, Scripta Materialia 60(12) (2009) 1039-1043. [61] D. Hughes, Microstructural evolution in a non-cell forming metal: Al-Mg, Acta metallurgica et materialia 41(5) (1993) 1421-1430. [62] J. Gu, M. Song, Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy, Scripta Materialia 162 (2019) 345-349. [63] S. Praveen, J.W. Bae, P. Asghari-Rad, J.M. Park, H.S. Kim, Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy, Materials Science Engineering: A 734 (2018) 338-340. [64] Y.-T. Tsai, Y.-W. Chen, J.-R. Yang, Severe deformation of nanostructured bainitic steel, Procedia Engineering 207 (2017) 1862-1867. [65] Y. Ma, F. Yuan, M. Yang, P. Jiang, E. Ma, X. Wu, Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures, Acta Materialia 148 (2018) 407-418. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60805 | - |
dc.description.abstract | 本研究係觀察均質化完之Fe-Co-Ni-Cr四元高熵合金施以70%冷加工量後在650°C進行退火,以不同退火時間(10分鐘至4小時)觀察退火後的退火雙晶(Annealing twin)成長情形,並發現在四小時內的退火處理除了退火雙晶外仍可以發現原先冷軋過程殘存尚未再結晶的大晶粒,而這些大晶粒內有冷軋時產生的變形雙晶(Deformation twin),因此材料的晶粒分布為部分再結晶(Partially recrystallized)的情形,預期以相對低溫的熱處理設計使材料在變形時,退火雙晶及原先的變形雙晶一同阻擋差排移動,使材料擁有更好的機械性質。接著製作前述條件之拉伸試片在室溫及低溫下做慢速拉伸試驗,由拉伸曲線觀察其強度及延性等機械性質;以及製作退火800°C(小晶粒)及1100°C(大晶粒)持溫1小時的霍普金森快速撞擊試片,在室溫及低溫下進行高應變速率的霍普金森快速撞擊試驗。並藉由EBSD (Electron Backscatter Diffraction )探討不同退火溫度及時間的再結晶程度及晶粒大小分佈情形,以及利用TEM (Transmission Electron Microscopy)觀察慢速拉伸試片及快速撞擊試片變形區的顯微結構變化。 在慢速拉伸實驗結果得知部分再結晶的拉伸試片擁有比完全再結晶試片好的強度,因為在未再結晶的滾軋晶粒中內含變形雙晶可阻擋差排移動,但犧牲些許延性。而低溫拉伸後擁有比室溫更好的強度及延性,原因為低溫下變形易於新的變形雙晶形成。 在室溫的快速霍普金森撞擊實驗結果得知高應變速率下易於變形雙晶的形成;在低溫的快速霍普金森撞擊實驗結果得知隨實驗的溫度下降材料的強度會上升,原因為低溫下變形易於新的變形雙晶形成,且小晶粒S的強度比大晶粒L來的好,原因為小晶粒擁有晶粒細化的效果。相較於慢速拉伸而言,在高應變速率的撞擊實驗中可以發現到變形雙晶隨處可見,且有許多地方可以觀察到第二組的變形雙晶(Secondary deformation twins)形成、變形雙晶之間交錯(twin-twin interaction)以及在奈米級退火雙晶出現兩方向變形雙晶的現象,這也是高應變速率撞擊實驗較低應變速率拉伸實驗擁有更好強度的原因。 | zh_TW |
dc.description.abstract | The present study was carried out to observe the growth situation of the annealing twins of a homogenized Fe-Co-Ni-Cr quaternary high entropy alloy with 70% cold working at 650°C heat treatment from 10 minutes to 4 hours. In addition to the annealing twins, it was found that large grains remaining from the original cold rolling process could still be found within four hours of annealing, and these large grains contained the deformation twins produced during cold rolling, so the grain distribution of the material was partially recrystallized. It is expected that the relatively low-temperature heat treatment design will allow the annealing twins and the original deformation twins to resist dislocations movement as the material is deformed, resulting in better mechanical properties. Next, the Fe-Co-Ni-Cr quaternary high-entropy alloy will take the low-stain-rate tensile deformation experiment and high-strain-rate compressive deformation experiment at room and cryogenic temperature to observe the mechanical properties. Last, by EBSD (Electron Backscatter Diffraction), the degree of recrystallization and grain size distribution at different annealing temperature and time are investigated, and TEM (Transmission Electron Microscopy) is used to observe the change of microstructure in the deformation area of the low strain rate tensile specimens and high strain rate compressive specimens. In the low strain rate tensile test, the results show that the partially recrystallized tensile specimens have better strength than fully recrystallized tensile specimens because the deformation twins which were contained in the original cold-rolled grains can impede the dislocations movement but sacrifice some ductility. Besides, the tensile specimens tensiling at cryogenic temperature have better strength and ductility than the tensile specimens tensiling at room temperature because the deformation at cryogenic temperature is easy to form new deformation twins. In the high strain rate Split Hopkinson Pressure Bar compressive test at room temperature, the results show that high strain rate deformation is easy to form deformation twins. And the results of this experiment at cryogenic temperature show that the strength of the material will increase as the temperature decreases because the cryogenic temperature is also easy to form new deformation twins. Besides, the strength of the small grain is better than that of the large grain because the small grain has better effect of grain refinement. Compared with low strain rate tensile test, the deformation twins can be found everywhere, and there are many places where the formation of the secondary deformation twins, the twin-twin interaction, and the formation of two variants of deformation twins in nano-annealing twins can be observed in the high strain rate compressive test. Hence, these are also the reasons why the Fe-Co-Ni-Cr quaternary high-entropy alloy material in high strain rate compressive test has better strength than in the low strain rate tensile test. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T10:30:58Z (GMT). No. of bitstreams: 1 U0001-0207202014062200.pdf: 10586976 bytes, checksum: d9cb6fe72ee33d2786c7fea6dcef5edc (MD5) Previous issue date: 2020 | en |
dc.description.tableofcontents | 口試委員會審定書 i 誌謝 ii 中文摘要 iii ABSTRACT iv CONTENTS vi LIST OF FIGURES ix LIST OF TABLES xiv LIST OF EQUATIONS xv Chapter 1 前言 1 Chapter 2 文獻回顧 2 2.1 高熵合金 2 2.1.1 高熵合金簡介及定義 2 2.1.2 高熵合金四大效應 4 2.2 雙晶 8 2.2.1 雙晶介紹 8 2.2.2 退火雙晶(Annealing twin) 11 2.2.3 變形雙晶(Deformation twin) 12 2.3 高熵合金之變形實驗 20 2.3.1 慢速拉伸試驗 20 2.3.2 快速撞擊試驗 24 2.3.3 高壓扭轉試驗 26 Chapter 3 實驗設計及步驟 30 3.1 實驗流程 30 3.1.1 實驗材料 31 3.1.2 軋延及熱處理 32 3.1.3 室溫與低溫慢速拉伸試驗 33 3.1.4 室溫與低溫快速撞擊試驗 34 3.2 實驗儀器與設備 37 3.2.1 熱膨脹儀Dilatomer 37 3.2.2 HV微硬度分析儀 37 3.2.3 輥軋機 37 3.2.4 MTS Landmark伺服油壓式動態材料試驗機 38 3.2.5 霍普金森桿 (Split Hopkinson Pressure Bar) 38 3.2.6 X光繞射分析 (X-ray diffraction analysis, XRD) 39 3.2.7 電子背向散射繞射儀(Electron Back-Scattered Diffraction, EBSD) 39 3.2.8 穿透式電子顯微鏡 (Transmission Electron Microscope) 40 Chapter 4 結果討論 42 4.1 不同時間及溫度退火後分析 42 4.1.1 不同時間及溫度退火後晶粒分布EBSD顯微結構分析 42 4.1.2 不同時間及溫度退火後晶粒分布TEM顯微結構分析 51 4.1.3 不同時間退火後硬度分析 55 4.2 四元高熵合金室溫及低溫下慢速拉伸試驗 56 4.2.1 室溫下慢速拉伸曲線及TEM顯微結構分析 56 4.2.2 低溫下慢速拉伸曲線及TEM顯微結構分析 61 4.3 四元高熵合在室溫及低溫下快速撞擊試驗 69 4.3.1 室溫及低溫下快速撞擊曲線及機械性質 69 4.3.2 室溫及低溫下及EBSD顯微結構分析 72 4.3.3 室溫及低溫下TEM顯微結構分析 78 4.4 X光繞射儀分析 89 Chapter 5 結論 90 Chapter 6 未來工作 92 REFERENCE 93 | |
dc.language.iso | zh-TW | |
dc.title | FeCoNiCr四元高熵合金慢速拉伸及快速撞擊實驗之機械性質與顯微結構研究 | zh_TW |
dc.title | Mechanical Property and Microstructure of Low-stain-rate Tensile Deformation and High-strain-rate Compressive Deformation in the FeCoNiCr Quaternary High-entropy Alloy | en |
dc.type | Thesis | |
dc.date.schoolyear | 108-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 葉均蔚(Jien-Wei Yeh),王星豪(Shing-Hoa Wang),王樂民(LE-MIN WANG),陳志遠(CHIH-YUAN CHEN) | |
dc.subject.keyword | 四元高熵合金,慢速拉伸實驗,快速撞擊實驗,機械雙晶,退火雙晶, | zh_TW |
dc.subject.keyword | Fe-Co-Ni-Cr quaternary high-entropy alloy,Low strain rate tensile test,High strain rate compressive test,Deformation twins,Annealing twins, | en |
dc.relation.page | 96 | |
dc.identifier.doi | 10.6342/NTU202001267 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2020-07-02 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
U0001-0207202014062200.pdf 目前未授權公開取用 | 10.34 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。