請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60744完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 李雨 | |
| dc.contributor.author | Don-Lin Lee | en |
| dc.contributor.author | 李東霖 | zh_TW |
| dc.date.accessioned | 2021-06-16T10:28:22Z | - |
| dc.date.available | 2016-08-20 | |
| dc.date.copyright | 2013-08-20 | |
| dc.date.issued | 2013 | |
| dc.date.submitted | 2013-08-15 | |
| dc.identifier.citation | [1] Griffith D.J., “Introduction to Electrodynamics”, Prentice Hall, New Jersey, 1999.
[2] Hughes M. P., “Nanoelectromechanics in Engineering and Biology”, CRC PRESS, London, 2003. [3] Jones T. B., “Electromechanics of Particles”, Cambridge University Press, Cambridge, 1995. [4] Lo Y. J., and U. Lei, “Quasi-static force and torque on spherical particles under generalized dielectrophoresis in the vicinity of walls”, Applied Physics Letters, vol. 95, 253701, 2009. [5] Lin Y. M., and U. Lei., “Separation of Bio-particles using Dielectrophoresis and Microfluidics”, National Taiwan University Master Thesis. [6] Lo Y. J., and U Lei., “Experimental validation of the theory of wall effect on dielectrophoresis”, Applied Physics Letters, vol. 97, 093702, 2010. [7] U Lei., and Lo Y. J., “Review of the theory of generalised dielectrophoresis”, IET NANOBIOTECHNOLOG, vol. 5 (3), 86-106, 2011. [8] Pohl H.A., “Dielectrophoresis the behavior of neutral matter in nonuniform electric fields”, Cambridge, Cambridge University Press, 1978. [9] Markx G.H., M.S. Talary, R. Pethig, “Separation of viable and non-viable yeast using dielectrophoresis”, Journal of Biotechnology, vol. 32, pp.29-37, 1994. [10] Lo Y. J., U. Lei and P. C. Yang , “Selective separation and isolation of particle/cells of similar sizes using dielectrophoresis”, MicroTAS, 2011. [11] Jen C. P., Maslov N. A., H. Y. Shih, Y. C.Lee and F. B. Hsiao, “Particle focusing in a contactless dielectrophoretic microfluidic chip with insulating structures”, Microsyst Technol, 2012. [12] Driesche S. V. D., V. Rao, R. E. Dietmar, W. Witarski and M. J. Vellekoop, “Continuous cell from separation by traveling wave dielectrophoresis”, Sensors and Actuators B, 2011. [13] Wang M. W., “Using Chelating Chitosan Nanobeads and a Microfluidic-Microelectric Trap to Sort Lead(II) in a Continuous Bloodstream Flow”, Journal of the Electrochemical Society, 2011 [14] Ling H. S., Y. C. Lam and K. S. Chian, “Continuous Cell Separation Using Dielectrophoresis through Asymmetric and Periodic Microelectrode Array”, Analytical chemistry, 2012. [15] Wang M. W., “Using Dielectrophoresis to Trap Nanobead/Stem Cell Compounds in Continuous Flow”, Journal of the Electrochemical Society, 2009. [16] Cheng I. F., “Dielectrophoresis-Based Microfluidic Devices and Their Application on Manipulating and Detecting Bioparticles/Molecular”, National Cheng Kung University Doctoral Dissertation, 2010. [17] Davis J. M., J. C. Giddings “Feasibility study of dielectrical field-flow fractionation”, Sepa. Sci. and Tech., vol. 21, pp.969-989 , 1986. [18] Yang C. Y., U. Lei, “Dielectrophoretic force and torque on an ellipsoid in an arbitrary time varying electric field”, Applied Physics letters, vol. 90, 153901, 2007. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60744 | - |
| dc.description.abstract | 介電泳力可依據微粒或細胞柯莫氏因子的不同，將尺寸接近的微粒或細胞作選擇性的捕捉與分離。相關裝置為一直線微流道(底壁為玻璃，其他壁面為PDMS)，流道上壁建構有四個凹槽，凹槽區上下游兩側底壁上各建置一電極，以產生電場。依據介電泳力、流體拖曳力、重力和浮力平衡的結果，不同微粒會被推入凹槽被捕捉或是被流體帶住下游。本研究企圖釐清此設計的各項幾何參數及操作條件，以研發一項能有效分離類同大小但不同種類微粒的微流裝置。為了簡化問題，本文將就單一凹槽的設計進行研究。以聚苯乙烯粒子、肺腺癌細胞(CL1-0及CL1-5)與大腸癌細胞(Colo205)進行實驗，探討電場頻率(100kHz~10MHz)、流道高度(25μm、30μm、35μm)、凹槽寬度(35μm、45μm)和背景流體流速(20~130μl/h)等參數對微粒捕捉率的影響，統計出適當的操作範圍。經由實驗，本裝置亦被證明可用於捕捉懸浮於血液中的肺腺癌細胞。最後本文提出一項改良裝置並予以測試，其設計為凹槽與電極修改為與流道傾斜四十五度的結構，此一改良可將捕捉於凹槽內的微粒平順而有效地導流至系統中預設的目標位置。 | zh_TW |
| dc.description.abstract | A method was proposed for selective isolation and separation of particles/cells of similar sizes based on their different Clausius-Mossotti factors using dielectrophoresis and microfluidics in the literature. The associated device is a straight micro channel (glass for the bottom wall and PDMS for the rest walls) with four grooves on its ceiling for capturing particles, and two electrodes on both sides of the groove region for generating electric field. A particle may be carried downstream by the imposed fluid stream or pushed into the groove, depending on the local force balance between dielectrophoretic force, fluid drag, gravity and buoyancy. The present study aims to clarify the capturing efficiency of various particles/cells under different geometric designs and operating conditions, and hope to develop a microfluidic chip capable of separating different cells of similar size efficiently. In order to simplify the problem, a single groove design is employed in the present experiment. Capture rates for polystyrene particles, two lung cancer cells, CL1-0 and CL1-5 (more invasive), and one colorectal cancer cells, Colo205, were measured for different channel heights, groove widths, applied electric frequencies, and background volume flow rates. The device was also demonstrated of capturing CL1-0 cells from a mixture of CL1-0 and blood cells. A modified design of the device was also proposed and tested. The groove and the electrodes are orientated obliquely to the background flow in the modified design (but are perpendicular in the original design), such that the captured particles/cells in the groove can be guided smoothly and effectively to designed destination downstream. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-16T10:28:22Z (GMT). No. of bitstreams: 1 ntu-102-R00543073-1.pdf: 4032540 bytes, checksum: dec4da43768d5a49a8527bd6fe8d67a1 (MD5) Previous issue date: 2013 | en |
| dc.description.tableofcontents | 致謝 I
摘要 II Abstract III 目錄 IV 圖表目錄 VII 第一章 緒論 1 1-1研究背景 1 1-2研究目的 2 1-3文獻回顧 3 1-4研究動機 4 1-5本文架構 5 第二章 原理 7 2-1 介電泳介紹 7 2-2等效的圓球模型 8 2-3等效偶極矩 10 2-4柯莫氏因子(CM factor) 11 2-5介電泳力 13 2-6正負介電泳力 14 2-7近牆介電泳效應 15 2-8黏滯拖曳力 18 2-9粒子/細胞軌跡(Particle/Cell Tracing) 18 第三章 研究方法與設備 20 3-1 以微機電技術(MENS)製作電極晶片 20 3-1-1電極設計 21 3-1-2清洗基材 23 3-1-3金屬層蒸鍍 24 3-1-4利用微機電製成製作電極 26 3-2利微機電製程技術製作微流道母模 28 3-2-1微流道設計 29 3-2-2微流道母模製作 31 3-2-3PDMS澆注與翻模 34 3-2-4PDMS微流道與電極接合 35 3-4實驗溶液與粒子/細胞選配 37 3-4-1 RPMI細胞培養液的調配 38 3-4-2實驗溶液的調配 39 3-4-3肺腺癌細胞(CL1-0、CL1-5)繼代培養與冷凍保存 39 3-4-4大腸癌細胞(Colo205)繼代培養與冷凍保存 42 3-5實驗設備及架設 42 3-6 COMSOL軟體介紹與邊界設定 45 第四章 研究結果及討論 47 4-1微粒捕捉晶片—PS微粒的結果 47 4-1-1聚苯乙烯粒子(PS particle)的捕捉 51 4-1-2操作頻率對捕捉率的影響 55 4-1-3不同高度尺寸捕捉率比較 58 4-1-4不同凹槽寬度尺寸抓取率比較 60 4-2微粒捕捉晶片—細胞的結果 61 4-2-1 CL1-0細胞尺寸分佈 61 4-2-2CL1-0細胞抓取實驗 63 4-2-3頻率對CL1-0細胞捕捉率的影響 65 4-2-4 CL1-5細胞尺寸分佈 66 4-2-5螢光CL1-5抓取實驗 67 4-2-6高相似性細胞分離的可能性 69 4-2-7模擬檢體中抓取擴散癌症細胞之實驗 71 4-3微粒分離晶片－具導流功能的微粒捕捉晶片 72 4-3-1導流聚苯乙烯粒子(PS particle) 72 4-3-2 Colo205細胞尺寸分布情形 73 4-3-3 Colo205細胞導流實驗 74 第五章 結論及未來展望 77 5-1結論 77 5-2未來展望 79 參考文獻及書目 81 | |
| dc.language.iso | zh-TW | |
| dc.subject | 凹槽流道設計 | zh_TW |
| dc.subject | 微粒分離 | zh_TW |
| dc.subject | 介電泳 | zh_TW |
| dc.subject | dielectrophoresis | en |
| dc.subject | particle separation | en |
| dc.subject | groove design | en |
| dc.title | 在微流系統中利用介電泳力捕捉及分離微粒與細胞 | zh_TW |
| dc.title | Trapping and separation of particles and cells using dielectrophoresis in microfluidic system | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 101-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 沈弘俊,楊政穎 | |
| dc.subject.keyword | 介電泳,微粒分離,凹槽流道設計, | zh_TW |
| dc.subject.keyword | dielectrophoresis,particle separation,groove design, | en |
| dc.relation.page | 82 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2013-08-15 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 應用力學研究所 | zh_TW |
| 顯示於系所單位： | 應用力學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-102-1.pdf 未授權公開取用 | 3.94 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。