請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60214
標題: | 應用鎂鋰合金於摺疊式電動自行車結構之研究 Application of magnesium-lithium alloy on folding e-bike structure |
作者: | Tzung-Shian Chen 陳宗賢 |
指導教授: | 鄭榮和 |
關鍵字: | 鎂鋰合金,摺疊式電動自行車,輕量化設計,有限元素分析, magnesium-lithium alloy,folding e-bike,light-weighting,finite element method, |
出版年 : | 2013 |
學位: | 碩士 |
摘要: | 本研究導入輕金屬鎂鋰合金材料ALZ821進行摺疊式電動自行車車架結構之設計。低密度鎂鋰合金材料首次應用於載具結構之輕量化設計上,故本研究利用有限元素方法進行車架設計,且利用修改車架外型幾何設計以及提升管件截面慣性矩之方法,改善鎂鋰合金楊氏模數不如一般金屬材料之情形。接著利用分析檢驗車架於輕量化後剛性與強度是否達到法規需求。本研究於設計過程中加入鋁合金材料AL6061-T6,在車架外型與剛性相同情況下,鎂鋰合金車架較鋁合金車架輕25%之重量,最後與市售自行車車架在相同負載下進行比較,鎂鋰合金在重量、剛性以及強度上也具有優勢。結果顯示以鎂鋰合金材料配合設計方法進行輕量化的效果突出,期盼未來鎂鋰合金能更廣泛的應用於載具結構上,以節省能源的浪費。 In this research, magnesium-lithium alloy (Mg-Li alloy) was introduced into the frame of folding e-bike. The material of Mg-Li alloy was firstly applied on light-weighting structure for vehicles. The frame was designed with the help of finite element method (FEM). It is found that optimizing the geometric outline with improved the moment of inertia can make up for the Young’s modulus of Mg-Li alloy, which is considered to be lower than other alloys used on bike. Also, the stiffness and the strength will be examined to check if it reaches the regulation of standard. Implementing aluminum alloy AL6061-T6 in the frame of Mg-Li alloy, the weight can be reduced by 25%, under the condition that the outline and stiffness are the same on both frame. Comparing the frame to others under the same loading, Mg-Li alloy has the edge on stiffness, strength, and weight. The progress is remarkable to implement Mg-Li alloy and new design method. The material is expected to be widely applied on structure of vehicles in order to save more resources. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60214 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 7.29 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。