請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/59965
標題: | 燈具高低調整與風機尾翼設計應用於植物工廠 Application of Adjustable Light Mounting Fixture and Tail-Wing Design of Wind Turbine in Plant Factory |
作者: | Hsiao-Fu Lin 林孝輔 |
指導教授: | 黃振康(Chen-Kang Huang) |
關鍵字: | 植物工廠,人工光源,節能技術,風力發電,鉛酸蓄電池, plant factory,artificial light source,energy saving,wind power generation,lead-acid battery, |
出版年 : | 2017 |
學位: | 碩士 |
摘要: | 本研究旨在探討燈具高低調整與風機尾翼設計應用於植物工廠之效果,以期改善環控農業長期以來一直為人詬病的操作成本過高的問題,在不犧牲人工光源光場品質的同時,提升人工光源之利用率,達到節能之目的。研究中將嘗試以加裝反光片的方式來提高光源反射率,增加植株接收到光的比例,以及以高低可調式燈具隨株高自動調整光源高度,將光源做更有效的利用。實驗結果顯示,人工光源距離影響光場強度甚鉅,在無加裝反光片下,當人工光源距離由30 cm 下降至10 cm 時,光量由23.46 提升到了40.83 The purpose of this study is to probe into the effect of the application of adjustable light mounting fixture and tail-wing design of wind turbine in plant factory in order to solve the problem of controlled environment agriculture which has long been criticized for high-cost, and to achieve the purpose of energy conservation without sacrificing the quality of artificial light sources. The reflectance of the light source has been improved by the reflector to increase the proportion of the light received by the plant, and to make the light source more effective by adjustable light mounting fixture which adjusts the height of the light source automatically. The result shows that the light intensity is increased by the height of the light mounting fixture, which is increased from 23.46 |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/59965 |
DOI: | 10.6342/NTU201700188 |
全文授權: | 有償授權 |
顯示於系所單位: | 生物機電工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-1.pdf 目前未授權公開取用 | 3.49 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。