請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56905
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 段維新(Wei-Hsing Tuan) | |
dc.contributor.author | Tseng-Wen Lian | en |
dc.contributor.author | 連增文 | zh_TW |
dc.date.accessioned | 2021-06-16T06:31:02Z | - |
dc.date.available | 2014-08-21 | |
dc.date.copyright | 2014-08-21 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-08-07 | |
dc.identifier.citation | [1] R. C. Garvie, R. H. Hannik, R. T. Pascoe, “Ceramic Steel?” Nature, 258, 703-704 (1975).
[2] T. K. Gupta, F. F. Lange, J.H. Bechtold, “Effect of Stress-induced Phase Transformation on the Properties of Polycrystalline Zirconia Containing Metastable Tetragonal Phase,” J. Mater. Sci., 13, 1464-1470 (1978). [3] R. M. McMeeking and A. G. Evans, “Mechanics of Transformation-Toughening in Brittle Materials,” J. Am. Ceram. Soc., 65 [5] 242-46 (1982). [4] J. Chevalier, L. Gremillard, A. V. Virkar and D. R. Clarke, “The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends,” J. Am. Ceram. Soc.,92 [9] 1901-20 (2009). [5] D. J. Kim, H. J. Jung, J. W. Jang, H. L. Lee, “Fracture Toughness, Ionic Conductivity, and Low-temperature Phase Stability of Tetragonal Zirconia Codoped with Yttria and Niobium Oxide,” J. Am. Ceram. Soc.,81 [9] 2309-14 (1998). [6] S. D. Yuh, Y. C. Lai, C. C. Chou, H. Y. Lee, “YNbO4-Addition on the Fracture Toughness of ZrO2(3Y) Ceramics,” J. Mater. Sci., 36, 2303-11 (2011). [7] D. J. Kim, H. J. Jung, D. H. Cho, “Phase Transformations of Y2O3 and Nb2O5 Doped Tetragonal Zirconia During Low Temperature Aging in Air,” Solid State Ionics, 80, 67-73 (1995). [8] B. Basu, J. Vleugels, O. V. D. Biest, “ZrO2-Al2O3 Composites with Tailored Toughness,” J. Alloys and Compounds, 372, 278-284 (2004). [9] R. H. J. Hannink, P. M. Kelly, B. C. Muddle, “Transformation Toughening in Zirconia-Containing Ceramics,” Journal of the American Ceramic Society, 83 [3] 461-87 (2000). [10] A. Navrotsky, “Thermal chemical insights into refractory ceramic materials based on oxides with large tetravalent cations,” Journal of materials chemistry, 2005, 15, 1883-1890. [11] F. Gallino, C. D. Valentin, G. Pacchioni, “Band gap engineering of bulk ZrO2 by Ti doping,” Phys. Chem. Chem. Phys., 2011, 13, 17667-17675. [12] J. M. Leger, P. E. Tomaszewski, A. Atouf, A. S. Pereira, “Pressure-Induced Structural Phase Transitions in Zirconia under High Pressure,” Phys.Rev. B, 47 14075-83. [13] H. Hasegawa, “Rhombohedral Phase Produced in Abraded Surface of Partially Stabilized Zirconia (PSZ),” J. Mater. Sci. Lett., 2, 91-93 (1983). [14] M. Ghatee, M. H. Shariat, J. T. S.Irvine, “Investigation of electrical and mechanical properties of 3YSZ/8YSZ composite electrolytes,” Solid State Ionics, 180, 57-62 (2009). [15] Z. Mutasim and W. Brentnall, “Thermal Barrier Coating for Industrial Gas Turbine Applications: An Industrial Note,” J. Therm. Spray Technol.,6 [1] 105-08 (1997). [16] D. Zhu, R. A. Miller, “Development of Advanced Low Conductivity Thermal Barrier Coatings,” Int. J. Appl. Ceram. Technol., 1 [1] 86-94 (2004). [17] S. M. Haile, “Fuel Cell Materials Components,” Acta Mater., 51, 5981-6000 (2003). [18] H. G. Scott, “Phase Relationships in the Zirconia-Yttria System,” J. Mater. Sci., 10 (1975) 1527-1535. [19] S. Lakiza, O. Fabrichnaya, M. Zinkevich, F. Aldinger, “On the Phase Relations in the ZrO2-YO1.5-AlO1.5 System,” J. Alloys Comp., 420, 237-45 (2006). [20] Y. H. Sun, Y. F. Zhang and J. K. Guo, “Microstructure and Bending Strength of 3Y-TZP Ceramics by Liquid-Phase Sintering with CAS Addition,” Ceram. Int., 29, 229-32 (2003). [21] K. Matsui, H. Horikoshi, N. Ohmichi and M. Ohgai, “Cubic-Formation and Grain-Growth Mechanism in Tetragonal Zirconia Polycrystal,” Journal of the American Ceramic Society, 86 [8] 1401-8 (2003). [22] N. Ohmichi, K. Kamioka, K. Ueda, K. Matsui and M. Ogai, “Phase Transformation of Zirconia Ceramics by Annealing in Hot Water,” J. Ceramic. Soc. Jpn., 107 [2] 128-33 (1999). [23] J. Chevalier, S. Deville, E. Munch, R. Jullian and F. Lair, “Critical Effect of Cubic Phase on Aging in 3 mol% Yttria-Stabilized Zirconia Ceramics for Hip Replacement Prosthesis,” Biomater., 25, 5539-45 (2004). [24] J. A. Allemann, B. Michel, H. B. Marki, L. J. Gauckler and E. M. Moser, “Grain-Growth of Differently Doped Zirconia,” J. Eur. Ceram. Soc., 15, 951-8 (1995). [25] S. Tekeli, M. Erdogan, B. Aktas, “Influence of α-Al2O3 Addition on Sintering and Grain Growth Behavior of 8 mol% Y2O3-Stabilized Cubic Zirconia (c-ZrO2),” Ceram. Int., 30, 2203-2209 (2004). [26] R. E. Reed-Hill and R. Abbaschian, “Physical Metallurgy Principles,” PWS Publishing Company, Boston. [27] S. J. L. Kang, “Sintering,” Elsevier Butterworth-Heinemann, 2005. [28] K. Matsui, H. Yoshida, Y. Ikuhara, “Phase-Transformation and Grain-Growth Kinetics in Yttria-Stabilized Tetragonal zirconia Polycrystal Doped with a Small Amount of Alumina,” J. Eur. Ceram. Soc., 30, 1679-1690 (2010). [29] K. Matsui, H. Yoshida, Y. Ikuhara, “Grain-Boundary Structure and Microstructure Development Mechanism in 2-8 mol% Yttria-Stabilized Zirconia Polycrystals ,” Acta Mater., 56, 1315-1325 (2008). [30] Encyclopedia Britannica, Inc, 1997. [31] J. B. Wachtman, “Mechanical Properties of Ceramics: An Introductory Survey,” Am. Ceram. Soc. Bull., 46 [8] 756-765 (1967). [32] R. W. Rice, “Strength-Grain Size Behavior of ZrO2 at Room Temperature ,” J. Mater. Sci. Lett., 13,1408-1412 (1994). [33] J. R. Weertman, “Hall-Petch strengthening in nanocrystalline metals,” Materials Science and Engineering: A, 166, 161-167 (1993). [34] L. Ruiz and M. J. Ready, “Effect of Heat Treatment on Grain Size, Phase Assemblage, and Mechanical Properties of 3 mol% Y-TZP,” Journal of the American Ceramic Society, 79 [9] 2331-40 (1996). [35] R. K. Govila, “Strength Characterization of Yttria-Partially Stabilized Zirconia,” J. Mater. Sci., 30, 2656-67(1995). [36] C. J. Ho, H. C. Liu and W. H. Tuan, “Effectof of abrasive Grinding on the Strength of Y-TZP,” J. Eur. Ceram. Soc., 29, 2665-69 (2009). [37] J. Wang, M. Rainforth and R. Stevens, “The Grain Size Dependence of the Mechanical Properties in TZP Ceramics,” Br. Ceram. Trans. J., 88, 1-6 (1989). [38] A. Bravo-Leon, Y. Morikawa, M. Kawahara and M. J. Mayo, “Fracture Toughness of Nanocrystalline Tetragonal Zirconia with Low Yttria Content,” Acta Mater., 50, 4555-62 (2002). [39] R. Shikata, Y. Urata, T. Shiono, T. Nishikawa, “Strengthening of Y-PSZ-Al2O3 composite ceramics,” Journal of the Japan Society of Powder and Powder Metallurgy, 37 [2] 357-361 (1990). [40] M. Fukuhara, “Properties of (Y)ZrO2-Al2O3 and (Y)ZrO2-Al2O3-(Ti or Si)C Composites,” J. Am. Ceram. Soc., 72 [2] 236-42 (1989). [41] K. Tsukuma, K. Ueda, M. Shimada, “Strength and Fracture Toughness of Isostatically Hot-Pressed Composites of Al2O3 and Y2O3-Partially-Stabilized ZrO2,” J. Am. Ceram. Soc., 68 [1] C-4-C-5 (1985). [42] G. Pezzotti, V. Sergo, O. Sbaizero, N. Muraki, T. Nishida, “Strengthening Contribution Arising from Residual Stresses in Al2O3/ZrO2 Composite: a Piezo-Spectroscopy Investigation,” J. Eur. Ceram. Soc., 19 (1999) 247-253. [43] J. K. M. F. Daguano, C. Santos, R. C. Souza, R. M. Balestre, K. Strecker, C. N. Elias, “Properties of ZrO2-Al2O3 Composite as a Function of Isothermal Holding Time,” Int. J. Refractory Metals & Hard Materials, 25 (2007) 374-379. [44] A. Celli, A. Tucci, L. Esposito, C. Palmonari, “Fractal analysis of cracks in alumina–zirconia composites,” J. Eur. Ceram. Soc., 23 (2003) 469-479. [45] T. Ohji, Y. K. Jeong, Y.H. Choa, K. Niihara, “Strengthening and Toughening Mechanisms of Ceramic Nanocomposites,” J. Am. Ceram. Soc., 81 [6] 1435-1460 (1998). [46] A. Nevarez-Rascon, A. Aguilar-Elguezabal, E. Orrantia, M.H. Bocanegra-Bernal, “On the wide Range of Mechanical Properties of ZTA and ATZ Based Dental Ceramic Composites by Varying the Al2O3 and ZrO2 content,” Int. J. Refractory Metals & Hard Materials, 27 962-970 (2009). [47] Kim DJ, Becher PF, “Effect of Nb2O5 Alloying on Thermal Expansion Anisotropy of 2 mol% Y2O3-Stabilized Tetragonal ZrO2,” J. Am. Ceram. Soc., 76, 2904-2908 (1993). [48] Raghavan S, Wang H, Porter WD, Dinwiddie RB, Mayo MJ. Acta. Mater. 49-169 (2001). [49] D. Y. Lee, Dae-Joon Kim, Duk-Ho Cho, “Low-temperature phase stability and mechanical properties of Y2O3- and Nb2O5-co-doped tetragonal zirconia polycrystal ceramics,” Journal of Materials Science Letters, 17, 185-187 (1998). [50] Z. Wang, Z. Q. Chen, S. J. Wang, “Effect of defect associate on the electrical properties of Nb-doped yttrium-stabilized zirconium,” Journal of Materials Science Letters, 19, 1275-1278 (2000). [51] S. Manisha Vidyavathy, “Microwave Sintering of Niobium Co-doped Yttria Stabilized Zirconia,” Modern Applied Science, 3, No.6 (2009). [52] K. W. Schlichting, N. P. Padture, P. G. Klemens, “Thermal Conductivity of Dense and Porous Yttria-Stabilized Zirconia,” Journal of Materials Science, 36, 3003-3010 (2001). [53] C. W. Cheng, W. H. Tuan, “Effect of NiO Addition on the Sintering Behaviour and Mechanical Properties of YSZ/Al2O3 composite,” National Taiwan University, Master Thesis. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56905 | - |
dc.description.abstract | 以3 mol%氧化釔安定之氧化鋯(3YSZ)具有優異的機械性質,如高強度及高韌性等。近年來在3YSZ中加入20wt%的氧化鋁(Al2O3)粉也因為其具有優秀的強度及熱穩定性而被廣泛應用。本研究將微量(0-2 mol%)的氧化鈮(Nb2O5)加到3YSZ及3YSZ/20wt%Al2O3中。試樣在空氣氣氛中進行燒結,持溫時間為一小時。本研究探討了添加氧化鈮對於相穩定性、微結構、機械性質、以及熱傳導性質的影響。
結果顯示當添加0.5 mol %氧化鈮時,3YSZ及3YSZ/20wt%Al2O3的破壞韌性將大幅度增加。當氧化鈮含量增加時,在試樣中的正方相氧化鋯將變得不穩定。不穩定的正方相氧化鋯易發生相變化,而伴隨的相變化增韌機制,使此兩氧化鋯系統的破壞韌性的提升。其他機械性質如強度以及硬度在本系統中並沒有隨著微量氧化鈮的添加而有明顯的變化。 3YSZ/20wt%Al2O3/Nb2O5相較於3YSZ/Nb2O5表現出較高的強度和韌性。強度以及韌性的增加源於3YSZ/20wt%Al2O3中的殘餘應力。 | zh_TW |
dc.description.abstract | The 3 mol% Y2O3-stabilized zirconia (3YSZ) exhibits excellent mechanical properties such as high strength and high fracture toughness. Recently, 3YSZ/20wt%Al2O3 powder has also been widely used for its excellent strength and thermal stability. In the present study, a small amount (0-2 mol%) of niobium oxide (Nb2O5) was added into 3YSZ and 3YSZ/20wt%Al2O3 systems. The specimens were sintered at 1600°C in air for 1 hour. The effect of Nb2O5 addition on the phase stability, microstructure, mechanical properties and thermal conductivity was then investigated.
The results indicate that the fracture toughness is increased significantly after the addition of 0.5 mol % Nb2O5 both in the 3YSZ and in 3YSZ/20wt%Al2O3 systems. The tetragonal ZrO2 phase in the composites becomes unstable as the Nb2O5 content is high. The instability of tetragonal ZrO2 promotes its transformability, it results in the phase transformation from tetragonal phase to monoclinic phase. The toughening mechanism induces the increase of fracture toughness in the zirconia systems. Other mechanical properties such as strength and hardness remain the same after the addition of a small amount of Nb2O5. The 3YSZ/20wt%Al2O3/Nb2O5 specimens exhibit higher flexural strength and higher fracture toughness comparing to those of the 3YSZ/Nb2O5 specimens. The increase of flexural strength and fracture toughness may be related to the presence of residual stress in the ZrO2-Al2O3 systems. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T06:31:02Z (GMT). No. of bitstreams: 1 ntu-103-R00527005-1.pdf: 10134049 bytes, checksum: 3defe2fe941a5bb9166d0eaa97b990ff (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | Chapter 1 Introduction 1
Chapter 2 Literature Survey 2 2-1 ZrO2 System 2 2-1-1 Phases of Zirconia 2 2-1-2 Yttria-Stabilized Zirconia (YSZ) System 2 2-1-3 Grain Growth of Zirconia 3 2-1-4 Transformation Toughening of Zirconia 4 2-1-5 Strength of YSZ 5 2-1-6 Fracture toughness of YSZ 6 2-2 3YSZ/20wt%Al2O3 System 13 2-2-1 Strength of 3YSZ/20wt%Al2O3 13 2-2-2 Fracture toughness of 3YSZ/20wt%Al2O3 14 2-3 3YSZ/Nb2O5 System 16 2-3-1 Solid Solution and Phase Stability 16 2-3-2 Density and Grain Size 17 2-3-3 Strength and Fracture Toughness of 3YSZ/Nb2O5 18 2-3-4 Ionic Conductivity of 3YSZ/Nb2O5 18 Chapter 3 Experimental Procedures 23 3-1 3YSZ/Nb2O5 23 3-1-1 Materials 23 3-1-2 Powder Mixture 23 3-1-3 Sintering 23 3-1-4 Characterization of Sintered Specimens 24 3-1-4-1 Phase Identification 24 3-1-4-2 Quantitative Analysis 24 3-1-4-3 Density Measurement 25 3-1-4-4 Microstructure Observation 26 3-1-5 Mechanical Properties 27 3-1-5-1 Young's Modulus 27 3-1-5-2 Flexural Strength 27 3-1-5-3 Fracture Toughness and Hardness 28 3-1-6 Thermal Conductivity 29 3-2 3YSZ/20wt%Al2O3/ Nb2O5 29 3-2-1 Materials 29 3-2-2 Powder Mixture 30 3-2-3 Sintering 30 3-2-4 Characterization of Sintered Specimens 30 3-2-5 Mechanical Properties 31 3-2-6 Thermal Conductivity 31 Chapter 4 Results 33 4-1 3YSZ/Nb2O5 33 4-1-1 Phase Identification 33 4-1-2 Densification 34 4-1-3 Microstructure Observation 35 4-1-4 Mechanical Properties 36 4-1-5 Thermal Conductivity 38 4-2 3YSZ/20wt%Al2O3/Nb2O5 48 4-2-1 Phase Identification 48 4-2-2 Densification 50 4-2-3 Microstructure Observation 51 4-2-4 Mechanical Properties 52 4-2-5 Thermal Conductivity 55 Chapter 5 Discussion 69 5-1 3YSZ/Nb2O5 69 5-1-1 Phase Identification 69 5-1-2 Densification 70 5-1-3 Microstructure Observation 71 5-1-4 Mechanical Properties 71 5-1-5 Thermal Conductivity 73 5-2 3YSZ/20wt%Al2O3/Nb2O5 79 5-2-1 Phase Identification 79 5-2-2 Densification 79 5-2-3 Microstructure Observation 80 5-2-4 Mechanical Properties 81 5-2-5 Thermal Conductivity 82 5-3 3YSZ/Nb2O5 vs. 3YSZ/20wt%Al2O3/Nb2O5 86 5-4 Nb2O5 vs. NiO 89 5-5 General Discussion 92 Chapter 6 Conclusions 94 Reference 95 | |
dc.language.iso | en | |
dc.title | 微量添加氧化鈮對釔安定氧化鋯複合材料之相穩定及機械性質之影響 | zh_TW |
dc.title | Effect of a Small Amount of Nb2O5 Addition on the Phase Stability and Mechanical Properties of Yttria-Stabilized Zirconia Composite | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 周振嘉,楊聰仁,陳世傑 | |
dc.subject.keyword | 氧化鈮,氧化釔安定氧化鋯,正方相氧化鋯,韌化機制,破壞韌性,強度,硬度, | zh_TW |
dc.subject.keyword | niobium oxide,3YSZ,tetragonal ZrO2 phase,toughening mechanism,fracture toughness,flexural strength,hardness, | en |
dc.relation.page | 103 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2014-08-07 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 9.9 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。