請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56480
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 李慧梅(Whei-May Lee) | |
dc.contributor.author | Yong-Sheng Yang | en |
dc.contributor.author | 楊詠勝 | zh_TW |
dc.date.accessioned | 2021-06-16T05:30:40Z | - |
dc.date.available | 2019-08-21 | |
dc.date.copyright | 2014-08-21 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-08-13 | |
dc.identifier.citation | 1. An, N. H., W. L. Zhang, X. L. Yuan, B. Pan, G. Liu, M. J. Jia, W. F. Yan and W. X. Zhang. 2013. Catalytic oxidation of formaldehyde over different silica supported platinum catalysts. Chemical Engineering Journal 215: 1-6.
2. Ashkar, F. S. and R. Miller. 1971. Hospital-ketosis in alcoholic diabetic - syndrome due to isopropyl alcohol intoxication. Southern Medical Journal 64(11): 1409-1415. 3. Brooks, B. O., G. M. Utter, J. A. Debroy and R. D. Schimke. 1991. Indoor air-pollution - an edifice complex. Journal of Toxicology-Clinical Toxicology 29(3): 315-374. 4. Brunauer, S., P. H. Emmett and E. Teller. 1938. Adsorption of Gases in Multimolecular Layers. Journal of the American Chemical Society 60(2): 309-319. 5. Dibble, L. A. and G. B. Raupp. 1992. Fluidized-bed photocatalytic oxidation of trichloroethylene in contaminated airstreams. Environmental Science & Technology 26(3): 492-495. 6. Fogler, H. S. 1999. Elements of chemical reaction engineering. 7. Fox, M. A. and M. T. Dulay. 1993. Heterogeneous photocatalysis. chemical reviews 93(1): 341-357. 8. Fu, P. F., P. Y. Zhang and J. Li. 2011. Photocatalytic degradation of low concentration formaldehyde and simultaneous elimination of ozone by-product using palladium modified TiO2 films under UV254+185nm irradiation. Applied Catalysis B-Environmental 105(1-2): 220-228. 9. Fujishima, A. and K. Honda. 1972. Electrochemical photolysis of water at a semiconductor electrode. Nature 238(5358): 37-38. 10. Gratzel, M. 2001. Photoelectrochemical cells. Nature 414(6861): 338-344. 11. Guo, H., N. H. Kwok, H. R. Cheng, S. C. Lee, W. T. Hung and Y. S. Li. 2009. Formaldehyde and volatile organic compounds in Hong Kong homes: concentrations and impact factors. Indoor Air 19(3): 206-217. 12. Hager, S., R. Bauer and G. Kudielka. 2000. Photocatalytic oxidation of gaseous chlorinated organics over titanium dioxide. Chemosphere 41(8): 1219-1225. 13. Harris, W., and G. Norman. 2008. X-ray Diffraction Techniques for Soil Mineral Identification. Methods of Soil Analysis Part 5—Mineralogical Methods. A. L. Ulery and L. Richard Drees, Soil Science Society of America: 81-115. 14. Hodgson, A. T., D. Faulkner, D. P. Sullivan, D. L. DiBartolomeo, M. L. Russell and W. J. Fisk. 2003. Effect of outside air ventilation rate on volatile organic compound concentrations in a call center. Atmospheric Environment 37(39-40): 5517-5527. 15. Huang, H. B. and D. Y. C. Leung. 2011. Complete elimination of indoor formaldehyde over supported Pt catalysts with extremely low Pt content at ambient temperature. Journal of Catalysis 280(1): 60-67. 16. Jacoby, W. A., D. M. Blake, J. A. Fennell, J. E. Boulter, L. M. Vargo, M. C. George and S. K. Dolberg. 1996. Heterogeneous photocatalysis for control of volatile organic compounds in indoor air. Journal of the Air & Waste Management Association 46(9): 891-898. 17. Kabir, E. and K. H. Kim. 2011. An investigation on hazardous and odorous pollutant emission during cooking activities. Journal of Hazardous Materials 188(1-3): 443-454. 18. Kavan, L., M. Gratzel, J. Rathousky and A. Zukal. 1996. Nanocrystalline TiO2 (anatase) electrodes: Surface morphology, adsorption, and electrochemical properties. Journal of the Electrochemical Society 143(2): 394-400. 19. Kecskes, T., J. Rasko and J. Kiss. 2004. FTIR and mass spectrometric studies on the interaction of formaldehyde with TiO2 supported Pt and Au catalysts. Applied Catalysis A-General 273(1-2): 55-62. 20. Kim, S. B. and S. C. Hong. 2002. Kinetic study for photocatalytic degradation of volatile organic compounds in air using thin film TiO(2) photocatalyst. Applied Catalysis B-Environmental 35(4): 305-315. 21. Kim, S. B., H. T. Hwang and S. C. Hong. 2002. Photocatalytic degradation of volatile organic compounds at the gas–solid interface of a TiO2 photocatalyst. Chemosphere 48(4): 437-444. 22. Kim, S. S., K. H. Park and S. C. Hong. 2011. A study on HCHO oxidation characteristics at room temperature using a Pt/TiO2 catalyst. Applied Catalysis A-General 398(1-2): 96-103. 23. Košler, J. and P. J. Sylvester. 2003. Present Trends and the Future of Zircon in Geochronology: Laser Ablation ICPMS. Reviews in Mineralogy and Geochemistry 53(1): 243-275. 24. Ku, Y., C. M. Ma and Y. S. Shen. 2001. Decomposition of gaseous trichloroethylene in a photoreactor with TiO2-coated nonwoven fiber textile. Applied Catalysis B-Environmental 34(3): 181-190. 25. Legan, R. W. 1982. Ultraviolet-light takes on cpi role. Chemical Engineering 89(2): 95-100. 26. Lewandowski, M. and D. F. Ollis. 2003. Extension of a Two-Site transient kinetic model of TiO2 deactivation during photocatalytic oxidation of aromatics: concentration variations and catalyst regeneration studies. Applied Catalysis B-Environmental 45(3): 223-238. 27. Li, S. R., X. Q. Lu, W. Y. Guo, H. Y. Zhu, M. Li, L. M. Zhao, Y. Li and H. H. Shan. 2012. Formaldehyde oxidation on the Pt/TiO2(101) surface: A DFT investigation. Journal of Organometallic Chemistry 704: 38-48. 28. Liang, W. H. and X. D. Yang. 2013. Indoor formaldehyde in real buildings: Emission source identification, overall emission rate estimation, concentration increase and decay patterns. Building and Environment 69: 114-120. 29. Liang, W. J., J. Li and Y. Q. Jin. 2012. Photo-catalytic degradation of gaseous formaldehyde by TiO2/UV, Ag/TiO2/UV and Ce/TiO2/UV. Building and Environment 51: 345-350. 30. Liu, B., X. Zhao, C. Terashima, A. Fujishima and K. Nakata. 2014. Thermodynamic and kinetic analysis of heterogeneous photocatalysis for semiconductor systems. Physical Chemistry Chemical Physics 16(19): 8751-8760. 31. Logue, J. M., N. E. Klepeis, A. B. Lobscheid and B. C. Singer. 2014. Pollutant Exposures from Natural Gas Cooking Burners: A Simulation-Based Assessment for Southern California. Environmental Health Perspectives 122(1): 43-50. 32. Lovreglio, P., A. Carrus, S. Iavicoli, I. Drago, B. Persechino and L. Soleo. 2009. Indoor formaldehyde and acetaldehyde levels in the province of Bari, South Italy, and estimated health risk. Journal of Environmental Monitoring 11(5): 955-961. 33. Macwan, D. P., P. N. Dave and S. Chaturvedi. 2011. A review on nano-TiO2 sol-gel type syntheses and its applications. Journal of Materials Science 46(11): 3669-3686. 34. Maira, A. J., K. L. Yeung, J. Soria, J. M. Coronado, C. Belver and C. Y. Lee. 2001. Gas-phase photo-oxidation of toluene using nanometer-size TiO2 catalysts. Applied Catalysis B-Environmental 29(4): 327-336. 35. Mo, J. H., Y. P. Zhang, Q. J. Xu, J. J. Lamson and R. Y. Zhao. 2009. Photocatalytic purification of volatile organic compounds in indoor air: A literature review. Atmospheric Environment 43(14): 2229-2246. 36. Nie, L. H., J. G. Yu, X. Y. Li, B. Cheng, G. Liu and M. Jaroniec. 2013. Enhanced Performance of NaOH-Modified Pt/TiO2 toward Room Temperature Selective Oxidation of Formaldehyde. Environmental Science & Technology 47(6): 2777-2783. 37. O'Shea, V., M. C. Alvarez-Galvan, J. L. G. Fierro and P. L. Arias. 2005. Influence of feed composition on the activity of Mn and PdMn/Al2O3 catalysts for combustion of formaldehyde/methanol. Applied Catalysis B-Environmental 57(3): 191-199. 38. Obee, T. N. and R. T. Brown. 1995. Tio2 photocatalysis for indoor air applications - effects of humidity and trace contaminant levels on the oxidation rates of formaldehyde, toluene, and 1,3-butadiene. Environmental Science & Technology 29(5): 1223-1231. 39. Ou, H. H. and S. L. Lo. 2007. Photocatalysis of gaseous trichloroethylene (TCE) over TiO2: The effect of oxygen and relative humidity on the generation of dichloroacetyl chloride (DCAC) and phosgene. Journal of Hazardous Materials 146(1-2): 302-308. 40. Pegas, P. N., C. A. Alves, M. G. Evtyugina, T. Nunes, M. Cerqueira, M. Franchi, C. A. Pio, S. M. Almeida, S. C. Verde and M. C. Freitas. 2011. Seasonal evaluation of outdoor/indoor air quality in primary schools in Lisbon. Journal of Environmental Monitoring 13(3): 657-667. 41. Peng, J. X. and S. D. Wang. 2007. Performance and characterization of supported metal catalysts for complete oxidation of formaldehyde at low temperatures. Applied Catalysis B-Environmental 73(3-4): 282-291. 42. Peral, J. and D. F. Ollis. 1992. Heterogeneous photocatalytic oxidation of gas-phase organics for air purification - acetone, 1-butanol, butyraldehyde, formaldehyde, and meta-xylene oxidation. Journal of Catalysis 136(2): 554-565. 43. Qi, H., D. Z. Sun and G. Q. Chi. 2007. Formaldehyde degradation by UV/TiO2/O-3 process using continuous flow mode. Journal of Environmental Sciences-China 19(9): 1136-1140. 44. Salthammer, T., S. Mentese and R. Marutzky. 2010. Formaldehyde in the Indoor Environment. Chemical Reviews 110(4): 2536-2572. 45. Sen, F., Y. Karatas, M. Gulcan and M. Zahmakiran. 2014. Amylamine stabilized platinum(0) nanoparticles: active and reusable nanocatalyst in the room temperature dehydrogenation of dimethylamine-borane. RSC Advances 4(4): 1526-1531. 46. Shang, J., Y. G. Du and Z. L. Xu. 2002. Photocatalytic oxidation of heptane in the gas-phase over TiO2. Chemosphere 46(1): 93-99. 47. Shen, Y. N., X. Z. Yang, Y. Z. Wang, Y. B. Zhang, H. Y. Zhu, L. Gao and M. L. Jia. 2008. The states of gold species in CeO2 supported gold catalyst for formaldehyde oxidation. Applied Catalysis B-Environmental 79(2): 142-148. 48. Sidheswaran, M. A., H. Destaillats, D. P. Sullivan, J. Larsen and W. J. Fisk. 2011. Quantitative room-temperature mineralization of airborne formaldehyde using manganese oxide catalysts. Applied Catalysis B-Environmental 107(1-2): 34-41. 49. Slaughter, E., R. M. Gersberg, K. Watanabe, J. Rudolph, C. Stransky and T. E. Novotny. 2011. Toxicity of cigarette butts, and their chemical components, to marine and freshwater fish. Tobacco Control 20: I25-I29. 50. Su, C., B. Y. Hong and C. M. Tseng. 2004. Sol-gel preparation and photocatalysis of titanium dioxide. Catalysis Today 96(3): 119-126. 51. Sun, S., J. J. Ding, J. Bao, C. Gao, Z. M. Qi and C. X. Li. 2010. Photocatalytic Oxidation of Gaseous Formaldehyde on TiO2: An In Situ DRIFTS Study. Catalysis Letters 137(3-4): 239-246. 52. Takeuchi, M., J. Deguchi, S. Sakai and M. Anpo. 2010. Effect of H2O vapor addition on the photocatalytic oxidation of ethanol, acetaldehyde and acetic acid in the gas phase on TiO2 semiconductor powders. Applied Catalysis B-Environmental 96(1-2): 218-223. 53. Torres, J. Q., S. Royer, J. P. Bellat, J. M. Giraudon and J. F. Lamonier. 2013. Formaldehyde: Catalytic Oxidation as a Promising Soft Way of Elimination. Chemsuschem 6(4): 578-592. 54. Tseng, T. K., Y. S. Lin, Y. J. Chen and H. Chu. 2010. A Review of Photocatalysts Prepared by Sol-Gel Method for VOCs Removal. International Journal of Molecular Sciences 11(6): 2336-2361. 55. Wang, H. L., X. Zhang and Z. M. Chen. 2009. Development of DNPH/HPLC method for the measurement of carbonyl compounds in the aqueous phase: applications to laboratory simulation and field measurement. Environmental Chemistry 6(5): 389-397. 56. White, L., Y. Koo, Y. H. Yun and J. Sankar. 2013. TiO2 Deposition on AZ31 Magnesium Alloy Using Plasma Electrolytic Oxidation. Journal of Nanomaterials: 8. 57. Wu, Y. T., Y. H. Liu, V. H. Nguyen, K. T. Lu and C. S. Wu. 2013. Enhanced xylene removal by photocatalytic oxidation using fiber-illuminated honeycomb reactor at ppb level. Journal of Hazardous Materials 262(15): 717-725. 58. Xu, Q. J., Y. P. Zhang, J. H. Mo and X. X. Li. 2011. Indoor Formaldehyde Removal by Thermal Catalyst: Kinetic Characteristics, Key Parameters, and Temperature Influence. Environmental Science & Technology 45(13): 5754-5760. 59. Yang, L. P., Z. Y. Liu, J. W. Shi, Y. Q. Zhang, H. Hu and W. F. Shangguan. 2007. Degradation of indoor gaseous formaldehyde by hybrid VUV and TiO2/UVprocesses. Separation and Purification Technology 54(2): 204-211. 60. Yu, H., K. Zhang and C. Rossi. 2007. Experimental study of the photocatalytic degradation of formaldehyde in indoor air using a nano-particulate titanium dioxide photocatalyst. Indoor and Built Environment 16(6): 529-537. 61. Zhang, C. and H. He. 2007. A comparative study of TiO2 supported noble metal catalysts for the oxidation of formaldehyde at room temperature. Catalysis Today 126(3-4): 345-350. 62. Zhang, C. B., H. He and K. Tanaka. 2006. Catalytic performance and mechanism of a Pt/TiO2 catalyst for the oxidation of formaldehyde at room temperature. Applied Catalysis B-Environmental 65(1-2): 37-43. 63. 丁宗義。2013。台灣地區氣候與油漆中甲醛濃度之關聯研究。碩士論文。台中:朝陽科技大學營建工程研究所。 64. 朱昱璋。2006。二氧化鈦奈米管擔載金, 鉑觸媒進行紫 外光甲醇重組產氫反應。碩士論文。桃園。國立中央大學化學工程與材料工程學研究所。 65. 余國賓。2006。以紫外光/臭氧程序增進光觸媒對室內揮發性有機物去除效率之研究。博士論文。臺北。國立臺灣大學環境工程學研究所。 66. 吳曄真。2008。台灣地區住宅系統板材裝修量對室內空氣品質影響之研究-以台南市施作案為例。碩士論文。臺南。國立成功大學建築學研究所。 67. 李雅玲。2010。Pt/TiO2-ZrO2觸媒於四氫萘氫化反應的抗硫性研究。碩士論文。新竹。國立清華大學化學工程學研究所。 68. 周文傑。2007。燃燒金紙與拜香所產生氣態污染物及飛灰中金屬成份之分布。碩士論文。臺南。國立成功大學環境工程學研究所。 69. 林冠沂。2013。利用蜂巢狀光觸媒處理甲醛之研究。碩士論文。臺北國立臺灣大學環境工程學研究所。 70. 洪安傑。2012。以蜂巢狀光觸媒載體處理室內生物源揮發性有機物之研究。碩士論文。臺北。國立臺灣大學環境工程學研究所。 71. 張家棋。2004。鉑金屬觸媒氧氯化再分散最適化條件之探討。碩士論文。嘉義。國立中正大學化學工程學研究所。 72. 張神鳳。2010。公共場所室內空氣品質調查與分析-以醫療院所為例。碩士論文。臺南。崑山科技大學環境工程學研究所。 73. 陳正堯。2004。利用固相微萃取進行甲醛短時間暴露評估技術之研究。臺北:行政院勞委會勞工安全衛生研究所。 74. 陳芳吟。2011。探討碳含量及鍛燒溫度對於碳摻雜二氧化鈦之特性影響及其光催化反應動力模式。碩士論文。臺中。國立中興大學土壤環境科學研究所。 75. 黃友澤。2010。商用大樓地下停車場及國道客運車廂內室內空氣品質調查。碩士論文。臺南。長榮大學職業安全與衛生研究所。 76. 黃東海。2007。既有辦公建築室內空氣品質改造及檢測之研究以高雄市辦公建築為例。碩士論文。臺南。國立成功大學建築學研究所。 77. 黃國豪。2008。以紫外光/臭氧程序增進光觸媒對室內生物源揮發性有機物去除效率之研。碩士論文。臺北。國立臺灣大學環境工程學研究所。 78. 黃燕清。2000。牙科診療作業場所室內空氣品質評估。碩士論文。高雄,高雄醫學大學公共衛生學研究所。 79. 劉萱萱。2013。大學普通化學實驗課程對實驗室內甲醛逸散濃度特性之研究。碩士論文。屏東。屏東科技大學環境工程與科學研究所。 80. 劉曉途。2011。蚊香和佛香燃燒過程中苯系物的排放。中國環境科學31(12): 1958-1964。 81. 鄭玫玲。2007。金、鉑擔載於二氧化鈦上進行光催化甲醇重組產氫之研究。碩士論文。桃園。國立中央大學化學工程學研究所 82. 賴宜君。2013。硫化鎘奈米鈦管以可見光催化甲酸溶液之產氫研究。碩士論文。臺北。國立臺灣大學環境工程學研究所。 83. 賴明俊。2009。以紫外光/臭氧程序增進光觸媒對室內揮發性有機物三氯乙烯去除效率之研究。碩士論文。臺北。國立臺灣大學環境工程學研究所。 84. 羅時麒。2009。健康綠建材揮發性有機化合物逸散量對室內空氣品質影響之研究。建築學報70(增刊): 77-92。 85. 龔大瑋。2007。精油薰燒溢散物及其潛在的氣狀及粒狀二次污染物之定性及定量分析研究。碩士論文。臺南。國立成功大學環境醫學研究所。 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56480 | - |
dc.description.abstract | 環保署在2012年開始施行室內空氣品質管理法,室內環境之空氣品質與民眾息息相關。甲醛為規範之室內空氣污染物之一,目前國內對甲醛濃度規範值為0.08ppm,室內甲醛來源包含室外來源以及室內來源,其中室外來源主要有發電廠、焚化爐、煉油廠、工廠廢氣和交通工具廢氣排放等;室內來源主要由家具建材、木製消費性產品、裝潢塗料與室內烹調燃燒等,其對人體健康危害如眼、鼻與黏膜組織刺激,易引起呼吸道病變及鼻咽腫瘤,國際癌症研究署(International Agency for Research on Cancer, IARC)將甲醛列為第一類致癌物質。
本實驗使用光沉積法製備Pt/TiO2光觸媒,將觸媒披覆於蜂巢狀陶瓷載體,置於不鏽鋼反應器內進行降解甲醛反應,測試第一階段未開光由觸媒直接降解甲醛以及第二階段開啟紫外光激發Pt/TiO2降解甲醛之轉化率。利用蜂巢狀陶瓷載體置入光纖,其孔洞可增加反應表面積及觸媒可披覆面積,提供254nm紫外光深入照射。Pt/TiO2光觸媒製備使用氯鉑酸(H2PtCl6)披覆,利用光沉積法將鉑金還原至Degussa P25 TiO2表面上,並使用X光粉末廣角繞射儀(X-Ray Powder Diffractometer)、場發射電子顯微鏡(Field Emission Gun Scanning Electron Microscopy)、比表面積分析儀(Specific Surface Area)及感應耦合電漿質譜分析儀(ICP-MS)儀器鑑定材料特性。實驗利用注射針筒驅動法配置甲醛氣體,以1400ml/min之氣體流率在不同相對溼度(30%、50%、70%)及接近室內環境甲醛之濃度(0.6ppm、0.8ppm、1.0ppm、1.2ppm、1.4ppm)進行實驗,以瞭解Pt/TiO2在不同相對濕度和進流濃度之甲醛轉化率。 本研究改質之Pt/TiO2比表面積為51.2992±0.3640m2/g,觸媒表面金屬含量為4018μg/g。於各條件實驗結果顯示,在此濃度與濕度範圍內進行實驗,在各條件下之甲醛轉化率未有顯著差異,第一階段未開光降解甲醛效率為51.87%±2.96%,第二階段開光降解甲醛效率為94.29%±1.02%,總降解效率為97.27%±0.43%。而濃度由0.6ppm增至1.4ppm,未開啟紫外光階段之反應速率由0.46±0.01×10-3μ-mol/m2-s增至1.01±0.02×10-3μ-mol/m2-s,而開啟紫外光階段之反應速率由0.40±0.01×10-3μ-mol/m2-s增至0.99±0.02×10-3μ-mol/m2-s,反應速率皆隨著濃度提高而上升。與林(2013)之研究比較,使用光沉積法置備鉑金改質二氧化鈦(Pt/TiO2),披覆於載體之觸媒量使用0.45±0.02g,僅林(2013)未改質光觸媒(TiO2)的七分之一,本實驗以Pt/TiO2處理甲醛之轉化率約97.27%±0.43%,較林(2013)未改質之降解效率(90%至95%)為佳,並於未開光階段即有約52%的降解效率。 | zh_TW |
dc.description.abstract | Environmental Protection Agency began to implement the Indoor Air Quality Management Act in 2012. Formaldehyde (HCHO) is one of the indoor air pollutants, and standard value of formaldehyde concentration is 0.08ppm in Taiwan. Sources of interior formaldehyde include outdoor source and indoor source. Outdoor source include power plant, incinerator, petroleum refinery, factory waste gas and vehicle exhaust emissions. Indoor source include wooden furniture, consumer products, paint and cooking. Formaldehyde is harmful to human health, such as eyes, nose and mucosal tissues irritation, and IARC (International Agency for Research on Cancer) classified it as carcinogenic to humans.
The P25 TiO2 supported Pt catalysts were using chloroplatinic acid (H2PtCl6) as the Pt precursor compound, and prepared by photo-deposition method in this study. The catalysts would coat on honeycomb monolith which supply more reaction area. Through optical fibers, the UV lamp could irradiate into honeycomb monolith to excite catalysts, and estimate the first stage (unirradiated) and the second stage (irradiated with UV254nm) formaldehyde conversion. Formaldehyde was degraded by photocatalytic reactor, the reactor include Pt/TiO2 supported honeycomb monolith. Pt/TiO2 catalysts were characterized by using XRD, SEM-EDX, BET and ICP-MS. The gas flow rate was controlled at 1.4 LPM with formaldehyde inlet concentration ranged from 0.6ppm to 1.4ppm under RH 30%, 50% and 70%. The BET surface area of Pt/TiO2 catalysts were increased to 51.2992±0.3640m2/g, and catalysts surface Pt loading were 4018μg/g. The first stage formaldehyde conversion is 51.87%±2.96%, second stage formaldehyde conversion is 94.29%±1.02% and total conversion is 97.27%±0.43%. These results demonstrated that various humidity and inlet concentration were not affect the activity of the catalysts. The oxidation rate constants of formaldehyde with inlet concentration ranged from 0.6ppm to 1.4ppm are increase from 0.46±0.01×10-3μ-mol/m2-s to 1.01±0.02×10-3μ-mol/m2-s at the first stage, and increase from 0.40±0.01×10-3μ-mol/m2-s to 0.99±0.02×10-3μ-mol/m2-s at the second stage. Formaldehyde conversion reaches 97.27%±0.43% when the weight of Pt/TiO2 catalysts coated on honeycomb monolith is 0.45±0.02g. Lin(2013) had used 3.27±0.05g P25 TiO2 to degrade low concentration formaldehyde, and HCHO conversion varied between 90% to 95%. Obviously, the Pt supported P25 TiO2 could reach higher formaldehyde conversion. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T05:30:40Z (GMT). No. of bitstreams: 1 ntu-103-R01541130-1.pdf: 2280218 bytes, checksum: 532d2f081a842cecd470fcd129c60359 (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | 謝誌 1
摘要 3 Abstract 5 目錄 7 圖目錄 11 表目錄 13 符號說明 15 第一章 緒論 17 1.1 研究緣起 17 1.2 研究目的 18 1.3 研究內容與方法 18 1.4 研究流程 19 第二章 文獻回顧 21 2.1 揮發性有機物之定義與種類 21 2.2 室內常見揮發性有機物之來源與物種 22 2.3 室內揮發性有機物對人體健康之衝擊 24 2.3.1室內揮發性有機物對人體健康影響 24 2.3.2甲醛性質、來源及規範 26 2.4 光觸媒催化反應 30 2.4.1二氧化鈦催化反應原理 30 2.4.2二氧化鈦之晶相與製備方法 33 2.4.3 Pt/TiO2之製備方法 35 2.4.4光催化反應影響因子 36 2.4.5光催化反應動力模式 41 2.5 降解揮發性有機物甲醛之相關研究 45 第三章 實驗設備與研究方法 47 3.1 實驗材料製備及儀器設備 47 3.1.1實驗材料 47 3.1.2儀器設備 48 3.2 實驗系統 50 3.2.1Pt/TiO2光觸媒製備系統 50 3.2.2實驗系統 52 3.2.3空氣供應系統 54 3.2.4濕度控制系統 54 3.2.5揮發性有機氣體產生系統 55 3.2.6光觸媒光反應系統 58 3.2.7揮發性氣體採樣及分析系統 61 3.3 光觸媒材料鑑定分析 63 3.3.1 X光粉末廣角繞射儀(X-Ray Powder Diffractometer) 63 3.3.2場發射電子顯微鏡(Scanning Electron Microscopy) 64 3.3.3比表面積分析(Specific Surface Area) 65 3.3.4感應耦合電漿質譜分析儀(ICP-MS) 66 3.4 實驗變因 67 3.5 實驗程序 68 第四章 結果與討論 71 4.1 材料分析 71 4.1.1 X光粉末廣角繞射儀(XRD)晶體分析 71 4.1.2 場發射電子顯微鏡(SEM)觸媒表面分析 74 4.1.3 感應耦合電漿質譜分析儀(ICP-MS)微量元素分析 76 4.1.4 觸媒比表面積分析(BET) 76 4.2 前置實驗 78 4.2.1 反應艙空白實驗 78 4.2.2 Pt/TiO2觸媒吸脫附實驗 78 4.3 氣體流率對觸媒反應之影響 81 4.4 相對溼度對觸媒反應之影響 83 4.5 甲醛進流濃度對觸媒反應之影響 87 4.6 光反應系統降解揮發性有機物甲醛研究之比較 92 第五章 結論與建議 93 5.1 結論 93 5.2 建議 95 參考文獻 97 附錄 – 口委問答與意見 105 附錄 – 數據圖表 109 | |
dc.language.iso | zh-TW | |
dc.title | 鉑金改質二氧化鈦之光觸媒降解室內甲醛之研究 | zh_TW |
dc.title | Control of Formaldehyde in Indoor Environment by Pt-loaded TiO2 Photocatalyst | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃小林(Hsiao-Lin Huang),余國賓(Kuo-Pin Yu),謝哲隆(Je-Lung Shie) | |
dc.subject.keyword | 甲醛,鉑,二氧化鈦,光觸媒,蜂巢狀陶瓷載體,VOCs, | zh_TW |
dc.subject.keyword | formaldehyde,Pt,TiO2,photocatalyst,honeycomb monolith,volatile organic compounds, | en |
dc.relation.page | 110 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2014-08-14 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 環境工程學研究所 | zh_TW |
顯示於系所單位: | 環境工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 2.23 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。