請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56287
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 葉仲基(Chung-Kee Yeh) | |
dc.contributor.author | Kai-Chung Huang | en |
dc.contributor.author | 黃楷中 | zh_TW |
dc.date.accessioned | 2021-06-16T05:21:58Z | - |
dc.date.available | 2017-08-26 | |
dc.date.copyright | 2014-08-26 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-08-15 | |
dc.identifier.citation | 王喬智。2004。載重車輛懸吊系統之動態模擬與分析。碩士論文。桃園:國防大學中正理工學院造船工程研究所。
王國強、張進平、馬若丁。2001。虛擬樣機技術及其在ADAMS上的實踐。西北學出版社。 元凱機械股份有限公司。2013。小牛YA-150L多功能搬運車。網址:http://www.yk.com.tw/ya150l-hi-power-carrier.html。上網日期:2013-12-10。 田雲生、龍國維。1994。小型多功能畦間搬運車研製。台中區農業改良場研究彙報 44:23-34。網址:http://tdares.coa.gov.tw/ htmlarea_file/web_articles/tdais/500/44-3.pdf。上網日期:2014-03-30。 行政院農業委員會農業試驗所農業工程組。1999。TS11-農地搬運車性能測定方法及暫行基準。網址:http://www.tari.gov.tw/sub /form/index.asp?Parser=2,30,858,386,404。上網日期:2013-11-05。 行政院農業委員會農糧署。1993。農地搬運車規格範圍。網址:http://www.afa.gov.tw/laws_index.asp?CatID=102。上網日期:2013-11-05。 汪文國。1998。農用運輸車制動器優化設計與仿真計算。江蘇:農業工程學報 (1): 108~111。 吳建勳。2004。車輛及零組件CAE分析技術建立。ARTC財團法人車輛測試中心專案技術報告。 邱文生。2000。座椅振動量測系統之建立及其在農地搬運車上之應用。碩士論文。台北:國立台灣大學農業機械工程學系。 林建志。2008。農用搬運車之安全與人因工程分析。碩士論文。宜蘭:宜蘭大學生物機電工程學系。 房科,周華,劉純志。2012。基於ADAMS/Car的雨天汽車行車安全分析。重慶:交通信息與安全期刊 30(6): 57-60。 娄云,王慧,魏增菊,李永强。2007。農用輪式車輛車輪動載荷的計算與試驗研究。河南:農機化研究期刊 (12): 187-190。 張璐、黃妙華。2008。ADMAS/Car在整車平順性研究中的應用。北京汽車期刊 (5): 20-23。 許自男。2005。汽車操控行為下之避震器阻尼分析。碩士論文。雲林:雲林科技大學機械工程學系。 馮丁樹。2008。台灣農業機械概論。網址: http://taiwan-agbook.blogspot.tw/。上網日期: 2013-10-07。 彭添松。2000。一個老農機人的回憶。網址:http://www.taiwan-agriculture.org/89a.html。上網日期: 2013-10-07。 傅增棣。2010。電腦輔助工程設計¬¬ ADAMS基礎應用手冊。二版。高立圖書有限公司。 黃偉、籃長安、吳紅雨。2011。CAE技術及其在車輛設計開發中的應用。汽車工程學報 01(4): 393-399。 黃建勳、于志宇。2000。應用ADAMS/Car於SUV車之動態翻滾抵抗性能改善。華創車電技術中心專案技術報告。 黃景裕。2000。汽車動態模擬系統。碩士論文。桃園:中央大學機械工程研究所。 潘飛,宇仁德,王傳麗。2011。基於ADAMS/Car的路面附著條件對行車安全的影響分析。山東:農業裝備與車輛工程期刊 (11): 30-32。 廖中文,高俊文,王海林。2011。農產品運輸車的穩態迴轉仿真試驗研究。廣東:農機化研究期刊 (5): 169~173。 謝昆儒。2008。多軸車輛操控安全性模擬與分析。碩士論文。雲林:雲林科技大學機械工程學系。 羅金橋。2006。重型載重汽車行駛穩定性與行駛系結構分析。碩士論文。 武漢:武漢理工大學車輛工程研究所。 Ghandour R., Alessandro Victorino, Moustapha Doumiati and Ali Charara. 2010. Tire/road friction coefficient estimation applied to road safety. Control & Automation Congress. Jadav, Chetan S. and Priyal R. Patel. 2012, Parametric analysis of four wheel vehicle using ADAMS/Car. International Journal of Computational Engineering Research 2(8): 263-268. Mueller, R. Lee. 2005. Full vehicle dynamics model of a formula SAE racecar using ADAMS/Car. Master Thesis. College Station, Texas: Texas A&M University, Department of Mechanical Engineering. Thomas, D. Gillespie. 1992. Fundamentals of vehicle dynamics. Warrendale PA: SAE International. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56287 | - |
dc.description.abstract | 農地搬運車為本土產業自主研發與成功製造的農機之一,主要作業為運輸農用物品及收成後之農穫物,因其良好的地形適應能力,廣受農民之喜愛,也著實減輕了農民的農務辛勞。
近年來台灣的農業工作環境已有很大的改變,許多農用機械效能皆有所提升,因此農地搬運車無論是載貨容量或馬力輸出方面都有不同於以往的需求,在市場所趨之下,至今農機廠商亦有發展相關技術可提供製造工作效能更高的農地搬運車,而此高效能之農地搬運車其安全性是否無慮?實屬有關農民生命安全的重要議題。 本研究是以ADAMS/Car此款電腦輔助工程軟體為研究工具,利用該軟體建立農地搬運車之全車運動模型並進行模擬分析,其車輛規格依照國內廠商共同提供資料並參與討論所得。實驗中搬運車之最高限速為20 km/h,其配載引擎之馬力依19hp / 21.5hp / 23hp三種規格進行動態模擬,載貨台模擬1200kg / 2400kg / 3600kg之載重,並使用不同的虛擬路面。模擬內容參考農地搬運車性能測定之內文,包括剎車距離、最小轉彎半徑、平地與坡地試驗等,觀察其模擬結果,並與實車測試結果相比較。 模擬結果顯示剎車距離主要由載貨量影響。空車與載貨量1200kg、2400kg時,皆符合農地搬運車性能測驗之標準,唯當載貨超過3600kg時容易超出規定值。此外,最小轉彎半徑為6.41至6.50公尺,轉彎性能良好。進行坡地模擬時,使搬運車停駐於15度坡地之車體重心維持穩定無滑移、再次啟動亦無礙。意即此款擁有大載貨量能力與較大引擎馬力之農地搬運車,其模擬測試之安全性能均能符合農地搬運車性能測定標準,且在正常操控下行經平地、坡地、障礙路面時均無翻覆之虞。 | zh_TW |
dc.description.abstract | The agricultural transporter is one kind of agricultural machinery successfully developed and made by local manufacturers. Its major function is to carry farm crops, goods, and products. Due to its great adaptability to terrain, it is very popular with farmers. Moreover, it undoubtedly reduces the human labor in agriculture tasks.
In recent years, there have been dramatic changes to our agricultural environment. The performance of agricultural machinery has improved considerably, and the power and carrying capacity requirements of agricultural transporters are not the same as before. Due to the demand of the market, agricultural transporters with high working capacity have been successfully developed and manufactured. However, whether these new types of agricultural transporter are really safe will become a significant issue. In this study, a Computer-Aided Engineering software named ADAMS is used as a research tool. By means of ADAMS, a multi-body system model of an agricultural transporter can be built to simulate its motion. The relevant vehicle specifications are provided by local manufacturers. In the simulation, the maximum speed of the vehicle is limited to 20 km/h. The power of the engine is classified as 19hp / 21.5hp / 23hp to obtain the dynamic simulation, and the capacity of the loading platform is grouped into 1200kg / 2400kg / 3600kg. Moreover, various simulated roads are selected. The simulation parameters include braking distance, minimum turning radius, and tests in even/sloping fields, which are according to the regulation of the Performance Test of Agricultural Transporters. Therefore, we can observe the results after the simulation and compare these with real field tests. The results from the simulation show the weight of loading greatly affects braking distance. Agricultural transporters without loading and loading with 1200kg and 2400kg on platform can meet the requirement of the regulation of the Performance Test of Agricultural Transporters. Only in the situation of a loading weight over 3600kg, will it exceed the specified value. Further, the minimum turning radius is in the range of 6.41 to 6.50 meters from the simulation, meaning the turning performance is acceptable. For the simulation of the sloping field test, the vehicle can halt on a 15-degree ramp and the center of gravity of the vehicle remains stable without slippage. Besides, the transporter can restart again smoothly. In conclusion, the simulated tests show the safety performance of an agricultural transporter with high carrying capacity and a high-powered engine can still meet the requirements of the regulation of the Performance Test of Agricultural Transporters. In addition, when this transporter operates on even ground, a sloping field or rugged road, the chance of rollover is almost nil. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T05:21:58Z (GMT). No. of bitstreams: 1 ntu-103-R01631029-1.pdf: 4361599 bytes, checksum: fd8792ecd18b8be09ef236bd81827eef (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | 口試委員審定書 i
致謝 ii 摘要 iii Abstract iv 圖目錄 vii 表目錄 x 第一章 前言 1 1.1 研究動機 1 1.2 研究目的 2 第二章 文獻探討 3 2.1 農地搬運車發展與簡介 3 2.2 車輛抗側翻穩定性分析 5 2.3 CAE技術用於車輛分析 6 2.4 農用車輪之數學模型 9 2.5 農地搬運車之安全性相關研究 12 2.6 ADAMS/Car於模擬分析之應用 13 第三章 材料與方法 15 3.1 實驗設備 15 3.2 ADAMS軟體概述 18 3.3 實驗方法 21 第四章 結果與討論 34 4.1 實驗項目與操縱變因 34 4.2 模擬剎車距離 34 4.3 最小轉彎模擬 40 4.4 爬坡試驗 43 4.5 障礙路面模擬 47 4.6 側向加速度翻覆門檻值 49 第五章 結論與建議 52 參考文獻 54 | |
dc.language.iso | zh-TW | |
dc.title | 農地搬運車安全性之電腦模擬 | zh_TW |
dc.title | Computer Simulation of the Safety of an Agricultural Transporter | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 張森富(Sen-Fuh Chang),吳剛智(Gang-Jhy Wu) | |
dc.subject.keyword | 農地搬運車,ADAMS軟體,車輛安全,馬力,載重量, | zh_TW |
dc.subject.keyword | Agricultural Transporter,ADAMS Sofware,Vehicle Safety,Power,Carrying Capacity, | en |
dc.relation.page | 56 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2014-08-15 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 生物產業機電工程學研究所 | zh_TW |
顯示於系所單位: | 生物機電工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 4.26 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。