請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/55451
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 張正憲 | |
dc.contributor.author | Tsung-Wei Lin | en |
dc.contributor.author | 林宗緯 | zh_TW |
dc.date.accessioned | 2021-06-16T04:03:11Z | - |
dc.date.available | 2015-02-03 | |
dc.date.copyright | 2015-02-03 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-10-13 | |
dc.identifier.citation | [1]M. Stewart, R. S. Howell, L. Pires, M. K. Hatalis, W. Howard, and O. Prache, “Polysilicon VGA active matrix OLED displays-technology and performance,” Electron Devices Meeting, IEDM'98. Technical Digest., International, IEEE, pp. 871-874 (1998).
[2]R. M. A. Dawson, Z. Shen, D. A. Furst, S. Connor, J. Hsu, M. G. Kane, ... and J. C. Sturm, “The impact of the transient response of organic light emitting diodes on the design of active matrix OLED displays,” Electron Devices Meeting. IEDM'98. Technical Digest., International, IEEE, pp. 875-878 (1998). [3]陳光榮。軟性AMOLED技術發展與商品化前線。工業材料雜誌(工研院月刊),329,pp. 61-65 (2014). [4]W. Fang, and J. A. Wickert, “Determining mean and gradient residual stresses in thin films using micromachined cantilevers,” Journal of Micromechanics and Microengineering, 6(3), pp. 301-309 (1996). [5]R. A. Sauer, “The peeling behavior of thin films with finite bending stiffness and the implications on gecko adhesion,” The Journal of Adhesion, 87(7-8), pp. 624-643 (2011). [6]A. Cerioni, “Simulation of delamination in composite materials under static and fatigue loading by cohesive zone models,” Ph.D. dissertation. Department of Mechanical Engineering, University of Cagliari, Cagliari, Italy (2009). [7]ADMET。材料試驗系統製造商。線上檢索日期:2014年9月19日。網址:http://admet.com/blogposts/what-is-a-universal-testing-machine-2/ [8]M. Noda, K. Teramoto, E. Fukumoto, T. Fukuda, K. Shimokawa, T. Saito, ... and K. Nomoto, “Oxide TFTs and Color Filter Array Technology for Flexible Top‐emission White OLED Display,” SID Symposium Digest of Technical Papers, 43(1), pp. 998-1001 (2012). [9]M. Noda, “The Development Trend of Flexible OLED Display and Its Technologies in SONY,” Display Development Division, Sony Corporation. [10]K. Kendall, “Thin-film peeling-the elastic term,” Journal of Physics D: Applied Physics, 8(13), p. 1449 (1975). [11]J. N. Israelachvili, Intermolecular and surface forces 3rd Ed., Academic Press, MA, USA (2011). [12]X. P. Xu, and A. Needleman, “Numerical simulations of fast crack growth in brittle solids,” Journal of the Mechanics and Physics of Solids, 42(9), pp. 1397-1434 (1994). [13]R. A. Sauer, and P. Wriggers, “Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale,” Computer Methods in Applied Mechanics and Engineering, 198(49), pp. 3871-3883 (2009). [14]J. N. Israelachvili, Intermolecular and surface forces 3rd Ed., Academic Press, MA, USA, pp. 117-126 (2011). [15]“32.5.6 Defining the constitutive response of cohesive elements using a traction-separation description, linear elastic traction-separation behavior,” Abaqus 6.12 Documentation, Analysis User’s manual. [16]“32.5.6 Defining the constitutive response of cohesive elements using a traction-separation description, Damage initiation,” Abaqus 6.12 Documentation, Analysis User’s manual. [17]M. F. Kanninen, “An augmented double cantilever beam model for studying crack propagation and arrest,” International Journal of Fracture, 9(1), pp. 83-92 (1973). [18]F. E. Penado, “A closed form solution for the energy release rate of the double cantilever beam specimen with an adhesive layer,” Journal of composite materials, 27(4), pp. 383-407 (1993). [19]S. P. Timoshenko, and J. N. Goodier, Theory of elasticity 3rd Ed., McGraw-HilI, New York, p. 567 (1970). [20]D. Broeck, Elementary Engineering Fracture Mechanics 4th Ed., Martinus Nijhoff, Dordrecht, The Netherlands, pp. 123-124 (1986). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/55451 | - |
dc.description.abstract | 主動式陣列有機發光二極體(active-matrix organic light-emitting diode, AMOLED)在近年來大量使用於手機、平板電腦及電視等電子設備的屏幕。而自發光性、廣視角、高對比、反應速度快及低耗能等特點使其成為面板業發展的重點。然而在未來發展中,可撓性AMOLED將成為下一代面板的關鍵,只可惜在製程上良率偏低導致其無法量產。因此各大面板業的龍頭國家,如韓國、台灣等都在解決製程良率問題,以搶得市場先機。
可撓性AMOLED主要採用塑膠基板取代玻璃,並且將其多層結構蒸鍍於玻璃上,而ITRI的FlexUP取下技術為待製程完畢後再利用一薄鋼板吸附於面板並利用儀器控制曲率取下。本研究的目的為針對該取下技術提升良率,然而脫層與折角現象為實驗中易觀察到的主要破壞機制,因此本研究利用牽引力-位移法則量化離型層特性,並根據雙懸臂樑理論定義其特徵,以建立相關離型取下模型。 根據所建立之離型取下模型提供弱鍵結力的層間應力計算及參數分析來達到最佳化模型。本研究之參數有真空吸盤與多孔性材料之剛度及真空吸盤之預留長度的影響分析,並綜合其結果提供最佳化模型的設計成果。最後,沿用單載板相關理論,創建雙載板模型,分析雙載板之折角現象,並提供可行的製程建議。 | zh_TW |
dc.description.abstract | In recent years, active-matrix organic light-emitting diode (AMOLED) extensively used in electronic devices’ screen such as mobile phones, tablet PCs and TVs. However, the features such as self-illuminating, wide viewing angle, high contrast, fast response and low power consumption make it become the development priorities of the panel industry. In the future development, the flexible AMOLED is the key technology of the next generation. Unfortunately, the low yield rate in the manufacturing process cannot lead to mass production. Therefore, in order to seize market opportunities, the panel industry leader, such as Korea and Taiwan, are now solving the problems of manufacture.
The purpose of this study is to improve the yield rate of de-bonding process. However, the delamination and corner phenomenon are the major failure mechanism which can easily observed in the experiment. Therefore, this study establishes the FlexUP model by using traction separation law to quantify the properties of de-bonding layer which can be defined by Double cantilever beam theory. According to the FlexUP model, the simulation calculates the stress between inner layers with weak bonding and also provides parameter analysis to achieve the optimal model, such as the stiffness of the porous material and sucker and the preserve length of the sucker. In addition, another model for dual carrier board which follows the theory of single carrier model provides preliminary estimate and experimental proposals in the future. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T04:03:11Z (GMT). No. of bitstreams: 1 ntu-103-R01543009-1.pdf: 1852254 bytes, checksum: 93722a889fdb64da60fff3332f3a23b4 (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 ii ABSTRACT iii 目錄 iv 圖目錄 vi 表目錄 viii Chapter 1 導論 1 1.1 前言 1 1.2 AMOLED暨取下技術介紹 2 1.2.1 取下技術種類與示意 2 1.2.2 AMOLED結構 4 1.2.3 離型層特性 6 1.3 AMOLED取下破壞機制 8 1.3.1 單載板取下 8 1.3.2 雙載板取下 11 Chapter 2 基本理論 13 2.1 剝離行為的能量守恆 13 2.1.1 外部作功(External Work) 14 2.1.2 內部能量(Internal Energy) 14 2.1.3 接觸能量(Contact Energy) 15 2.2 剝離行為的力學方程式 16 2.2.1 純拉伸剝離模型 16 2.2.2 彈性薄試片的準確剝離模型 17 Chapter 3 有限元素模擬分析 21 3.1 離型層介面牽引力研究 21 3.2 Abaqus 黏著元素之探討 23 3.2.1 牽引力-位移法則(Traction-separation law) 23 3.2.2 雙懸臂樑理論(DCB Theory) 27 3.3 Abaqus 模擬設定與結果 31 3.3.1 位移控制及參數設定 31 3.3.2 單載板取下模擬結果 34 3.3.3 雙載板取下模擬結果 42 Chapter 4 結論與未來展望 44 4.1 結論 44 4.2 未來展望 45 參考文獻 46 附錄 有限元素模擬過程 49 | |
dc.language.iso | zh-TW | |
dc.title | 離型取下應力模擬 | zh_TW |
dc.title | 2D Simulation of De-bonding Problems of Flexible Electric Devices | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳光鐘,趙聖德,蔡鎮竹,黃冠榮 | |
dc.subject.keyword | 可撓性AMOLED,牽引力-位移法則,雙懸臂樑理論,最佳化模型, | zh_TW |
dc.subject.keyword | flexible AMOLED,traction separation law,double cantilever beam theory,optimal model, | en |
dc.relation.page | 50 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2014-10-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 1.81 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。