請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/54424
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 吳錫侃(Shyi-Kaan Wu) | |
dc.contributor.author | Chih-Hsuan Chen | en |
dc.contributor.author | 陳志軒 | zh_TW |
dc.date.accessioned | 2021-06-16T02:56:07Z | - |
dc.date.available | 2025-07-08 | |
dc.date.copyright | 2015-07-20 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-07-08 | |
dc.identifier.citation | [1] Wasilews.Rj, S.R. Butler, J.E. Hanlon, D. Worden, Metall. Trans., 2 (1971) 229.
[2] K. Otsuka, X. Ren, Prog. Mater. Sci., 50 (2005) 511. [3] M. Nishida, C.M. Wayman, T. Honma, Metall. Trans. A, 17 (1986) 1505. [4] K. Otsuka, T. Sawamura, K. Shimizu, C.M. Wayman, Metall. Trans., 2 (1971) 2583. [5] K. Otsuka, T. Sawamura, K. Shimizu, Phys. Status Solidi A, 5 (1971) 457. [6] R.F. Hehemann, G.D. Sandrock, Scripta Metall. Mater., 5 (1971) 801. [7] G.D. Sandrock, A.J. Perkins, R.F. Hehemann, Metall. Trans., 2 (1971) 2769. [8] G.M. Michal, R. Sinclair, Acta Crystallogr. B, 37 (1981) 1803. [9] W. Buhrer, R. Gotthardt, A. Kulik, O. Mercier, F. Staub, J. Phys. F: Met. Phys., 13 (1983) L77. [10] Y. Kudoh, M. Tokonami, S. Miyazaki, K. Otsuka, Acta Metall., 33 (1985) 2049. [11] S. Miyazaki, K. Otsuka, C.M. Wayman, Acta Metall., 37 (1989) 1873. [12] S. Miyazaki, K. Otsuka, C.M. Wayman, Acta Metall., 37 (1989) 1885. [13] S. Miyazaki, K. Otsuka, C.M. Wayman, ISIJ Int'l, 29 (1989) 423. [14] P. Krulevitch, A.P. Lee, P.B. Ramsey, J.C. Trevino, J. Hamilton, M.A. Northrup, J. Microelectromech. Syst., 5 (1996) 270. [15] A. Ishida, K. Ogawa, M. Sato, S. Miyazaki, Metall. Mater. Trans. A, 28 (1997) 1985. [16] A. Ishida, M. Sate, A. Takei, S. Miyazaki, Mater. Trans. JIM, 36 (1995) 1349. [17] S. Kajiwara, T. Kikuchi, K. Ogawa, T. Matsunaga, S. Miyazaki, Phil. Mag. Lett., 74 (1996) 137. [18] S. Kajiwara, K. Ogawa, T. Kikuchi, T. Matsunaga, S. Miyazaki, Phil. Mag. Lett., 74 (1996) 395. [19] J.X. Zhang, M. Sato, A. Ishida, Acta Mater., 49 (2001) 3001. [20] J.X. Zhang, M. Sato, A. Ishida, Phil. Mag. Lett., 82 (2002) 257. [21] J.X. Zhang, M. Sato, A. Ishida, Acta Mater., 51 (2003) 3121. [22] S. Miyazaki, A. Ishida, Mater. Sci. Eng. A, 273 (1999) 106. [23] Y. Furuya, M. Matsumoto, H.S. Kimura, T. Masumoto, Mater. Sci. Eng. A, 147 (1991) L7. [24] Y. Liu, Z.L. Xie, Y.X. Tong, C.W. Lim, J. Alloys Compd0, 416 (2006) 188. [25] J. Morgiel, E. Cesari, J. Pons, A. Pasko, J. Dutkiewicz, J. Mater. Sci., 37 (2002) 5319. [26] T.H. Nam, J.H. Lee, K.W. Kim, H.J. Ahn, Y.W. Kim, J. Mater. Sci., 40 (2005) 4925. [27] S.H. Chang, S.K. Wu, H. Kimura, Mater. Trans., 47 (2006) 2489. [28] A.V. Shelyakov, N.N. Sitnikov, A.P. Menushenkov, A.A. Korneev, R.N. Rizakhanov, N.A. Sokolova, J. Alloys Compd., 577S (2013) S251. [29] J.H. Lee, T.H. Nam, H.J. Ahn, Y.W. Kim, Mater. Sci. Eng. A, 438 (2006) 691. [30] T.H. Nam, J.H. Lee, J.M. Nam, K.W. Kim, G.B. Cho, Y.W. Kim, Mater. Sci. Eng. A, 483-84 (2008) 460. [31] Y. Tong, Y. Liu, J. Alloys Compd., 449 (2008) 152. [32] S.H. Chang, S.K. Wu, H. Kimura, Mater. Sci. Eng. A, 476 (2008) 316. [33] Z.L. Xie, G.P. Cheng, Y. Liu, Acta Mater., 55 (2007) 361. [34] Alexander Shelyakov, Nikolay Sitnikov, Sergey Saakyan, Alexey Menushenkov, Razhudin Rizakhanov, A. Korneev, Mater. Sci. Forum, 738-739 (2013) 352. [35] Y.X. Tong, Y. Liu, Mater. Chem. Phys., 120 (2010) 221. [36] A.V. Shelyakov, N.N. Sitnikov , V.V. Koledov , D.S. Kuchin , A.I. Irzhak, N.Y. Tabachkova, Int'l J. Smart and Nano Mater., 2 (2011) 68. [37] A.V. Shelyakov, N.N. Sitnikov, A.P. Menushenkov, V.V. Koledov, A.I. Irjak, Thin Solid Films, 519 (2011) 5314. [38] G.P. Cheng, Z.L. Xie, J. Alloys Compd., 396 (2005) 128. [39] S.H. Chang, S.K. Wu, L.M. Wu, Intermetallics, 18 (2010) 965. [40] C.H. Chen, S.K. Wu, Mater. Sci. Eng. A, 593 (2014) 85. [41] S.H. Chang, S.K. Wu, H. Kimura, Intermetallics, 15 (2007) 233. [42] J. Frenzel, E.P. George, A. Dlouhy, C. Somsen, M.F.X. Wagner, G. Eggeler, Acta Mater., 58 (2010) 3444. [43] K. Otsuka, T. Kakeshita, MRS Bull., 27 (2002) 91. [44] O.H. Massalski TB, Subramanian PR, Kacprzak L, editors., ASM International, 3 (1990) 2874. [45] S. Miyazaki, S. Kimura, K. Otsuka, Philos. Mag. A, 57 (1988) 467. [46] H. T., PhD thesis, University of Tsukuba, (1997) 31. [47] F. Laves, Kristallographie der Legierungen 27 (1939) 65. [48] P. Duwez, J.L. Taylor, Trans. AIME, 188 (1950) 1173. [49] G.A. Yurko, J.W. Barton, J.G. Parr, Acta Crystallogr., 12 (1959) 909. [50] J. Khalil-Allafi, A. Dlouhy, G. Eggeler, Acta Mater., 50 (2002) 4255. [51] D.Q. Xue, Y.M. Zhou, X.B. Ren, Intermetallics, 19 (2011) 1752. [52] V. Pelosin, A. Riviere, Metall. Mater. Trans. A, 29 (1998) 1175. [53] N. Resnina, S. Belyaev, J. Alloys Compd., 486 (2009) 304. [54] S. Miyazaki, Y. Ohmi, K. Otsuka, Y. Suzuki, J. Phys. Paris, 43 (1982) 255. [55] H.C. Lin, S.K. Wu, Metall. Trans. A, 24 (1993) 293. [56] C.M. Hwang, M. Meichle, M.B. Salamon, C.M. Wayman, Philos. Mag. A, 47 (1983) 9. [57] C.M. Hwang, M. Meichle, M.B. Salamon, C.M. Wayman, Philos. Mag. A, 47 (1983) 31. [58] C.M. Hwang, M.B. Salamon, C.M. Wayman, Philos. Mag. A, 47 (1983) 177. [59] K.N. Melton, T. Duerig, J.L. Proft, MRS Int’l Mtg. On Adv. Mats. 9 (1989) 159. [60] N.G. Jones, S.L. Raghunathan, D. Dye, Metall. Mater. Trans. A, 41A (2010) 912. [61] P.L. Potapov, S.E. Kulkova, A.V. Shelyakov, K. Okutsu, S. Miyazaki, D. Schryvers, J. Phys. IV, 112 (2003) 727. [62] B. Ramachandran, R.C. Tang, P.C. Chang, Y.K. Kuo, C. Chien, S.K. Wu, J. Appl. Phys., 113 (2013) 203702. [63] Y.Y. Teng, S.L. Zhu, F.H. Wang, W.T. Wu, Physica B, 393 (2007) 18. [64] 陳志軒, 國科會大專學生參與研究專題計畫, (2009) 61. [65] L. Bataillard, J.E. Bidaux, R. Gotthard, Philos. Mag. A, 78 (1998) 327. [66] A. Dlouhy, J. Khalil-Allafi, G. Eggeler, Philos. Mag., 83 (2003) 339. [67] G.L. Fan, W. Chen, S. Yang, J.H. Zhu, X.B. Ren, K. Otsuka, Acta Mater., 52 (2004) 4351. [68] G. Fan, Y. Zhou, W. Chen, S. Yang, X. Ren, K. Otsuka, Mater Sci. Eng. A, 438 (2006) 622. [69] D. Chrobak, D. Stroz, H. Morawiec, Scripta Mater., 48 (2003) 571. [70] P.C. Su, S.K. Wu, Acta Mater., 52 (2004) 1117. [71] Y.N. Liu, X. Chen, P.G. McCormick, J. Mater. Sci., 32 (1997) 5979. [72] L. Bataillard, R. Gotthardt, J. Phys. IV, 5 (1995) 647. [73] M.C. Carroll, C. Somsen, G. Eggeler, Scripta Mater., 50 (2004) 187. [74] J.K. Allafi, X. Ren, G. Eggeler, Acta Mater., 50 (2002) 793. [75] J. Michutta, C. Somsen, A. Yawny, A. Dlouhy, G. Eggeler, Acta Mater., 54 (2006) 3525. [76] K.H. Eckelmeyer, Scripta Metall. Mater., 10 (1976) 667. [77] J.E. Hanlon, S.R. Butler, R.J. Wasilewski, Trans. Metall. Soc. AIME, 239 (1967) 1323. [78] K.S. Otsuka, K., Int'l Metals Review, 31 (1986) 93. [79] T. Saburi, T. Tatsumi, S. Nenno, J. De Phys., 43 (1982) 261. [80] M. Nishida, C.M. Wayman, Metallography, 21 (1988) 255. [81] M. Nishida, C.M. Wayman, A. Chiba, Metallography, 21 (1988) 275. [82] T. Tadaki, Y. Nakata, K. Shimizu, Trans. JIM, 28 (1987) 883. [83] S. Miyazaki, Y. Igo, K. Otsuka, Acta Metall., 34 (1986) 2045. [84] C.M. Hwang, C.M. Wayman, Scripta Metall. Mater., 17 (1983) 381. [85] H.C. Lin, S.K. Wu, T.S. Chou, H.P. Kao, Acta Metall. Mater., 39 (1991) 2069. [86] S.H. Chang, S.K. Wu, G.H. Chang, Scripta Mater., 52 (2005) 1341. [87] R. E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles, 3rd ed. PWS-Kent, Boston, 1992. [88] C.M. Wayman, Met. Forum, 4 (1981) 135. [89] T.A. Schroeder, C.M. Wayman, Acta Metall., 27 (1979) 405. [90] S.E. P. Donner, Mater. Sci. Forum, 56-58 (1991) 723. [91] A.G. Gillen, B. Cantor, Acta Metall., 33 (1985) 1813. [92] Y.W. Kim, T.H. Nam, Scripta Mater., 51 (2004) 653. [93] W.B.d.C. Geroge C. S. Anselmo, Carlos J. de Araújo, Mater. Sci. Appl., 2 (2011) 1256. [94] R. Nagarajan, K. Chattopadhyay, Acta Metall. Mater., 42 (1994) 947. [95] H.Y.K.a.S.M. Hongyan Xing, Mater. Sci. Forum, 561-565 (2007) 1481. [96] G.P. Cheng, Z.L. Xie, Y. Liu, J. Alloys Compd., 415 (2006) 182. [97] J.R. Williams, H. Gong, N. Hoff, O.I. Olubodun, P.J. Carroll, Org. Lett., 6 (2004) 269. [98] K.H. Chang, S.K. Wu, S.H. Chang, Thin Solid Films, 519 (2011) 5302. [99] M. Sato, A. Ishida, S. Miyazaki, Thin Solid Films, 315 (1998) 305. [100] Y. Nakata, T. Tadaki, H. Sakamoto, A. Tanaka, K. Shimizu, J. Phys. IV, 5 (1995) 671. [101] A. Ishida, J.X. Zhang, J. Phys. IV, 112 (2003) 849. [102] K.N. Lin, S.K. Wu, J. Alloys Compd., 424 (2006) 171. [103] S.H. Chang, T.H. Chen, S.K. Wu, K.N. Lin, Phys. Scripta, T139 (2010) 014012. [104] T.H. Nam, J.H. Kim, M.S. Choi, Y.W. Kim, H.J. Im, J.S. Ahn, T. Mitani, J. Mater. Sci. Lett., 21 (2002) 685. [105] L.M. Wu, S.H. Chang, S.K. Wu, J. Alloys Compd., 505 (2010) 76. [106] L.M. Wu, S.K. Wu, Phil. Mag. Lett., 90 (2010) 261. [107] M.F. Doerner and W.D. Nix, J. Mater. Res., 1 (1986) 601. [108] W.D. Nix, Metall. Trans. A, 20 (1989) 2217. [109] J.L. Loubet, J.M. Georges, O. Marchesini, G. Meille, J. Tribol-T ASME, 106 (1984) 43. [110] I. Sneddon, Int'l J. Eng. Sci., 3 (1965) 47. [111] R.B. King, T.C. Osullivan, Int'l J. Solids Struct., 23 (1987) 581. [112] P. E. Wierenga, A. J. J. Franken, Philips technical review, 42 (1985) 85. [113] W.C. Oliver, G.M. Pharr, J. Mater. Res., 7 (1992) 1564. [114] J.W. Harding and I.N. Sneddon, Proc. Cambridge Philos. Soc, 41 (1945) 16. [115] C. Liu, Y.P. Zhao, Q.P. Sun, T.X. Yu, Z.X. Cao, J. Mater. Sci., 40 (2005) 1501. [116] H.S. Zhang, K. Komvopoulos, J. Mater. Sci., 41 (2006) 5021. [117] K. Sekido, T. Ohmura, T. Sawaguchi, M. Koyama, H.W. Park, K. Tsuzaki, Scripta Mater., 65 (2011) 942. [118] A.J. Clarke, R.D. Field, P.O. Dickerson, R.J. McCabe, J.G. Swadener, R.E. Hackenberg, D.J. Thoma, Scripta Mater., 60 (2009) 890. [119] X.G. Ma, K. Komvopoulos, Appl. Phys. Lett., 83 (2003) 3773. [120] K. Komvopoulos, X.G. Ma, Appl. Phys. Lett., 87 (2005) 263108. [121] X.G. Ma, K. Komvopoulos, Appl. Phys. Lett., 84 (2004) 4274. [122] X.G. Ma, K. Komvopoulos, J. Mater. Res., 20 (2005) 1808. [123] A. J. Muir Wood, J.H. You, T. W. Clyne, Proc. of SPIE, 5648 (2004) 216. [124] A.J.M. Wood, T.W. Clyne, Acta Mater., 54 (2006) 5607. [125] A.J.M. Wood, S. Sanjabi, Y.Q. Fu, Z.H. Barber, T.W. Clyne, Surf. Coat. Tech., 202 (2008) 3115. [126] J. Pfetzing, A. Schaefer, C. Somsen, M.F.X. Wagner, Int'l J. Mater. Res., 100 (2009) 936. [127] H.X. Zheng, J. Pfetzing, J. Frenzel, G. Eggeler, Int'l J. Mater. Res., 100 (2009) 594. [128] H. Zheng, J.C. Rao, J. Pfetzing, J. Frenzel, C. Somsen, G. Eggeler, Scripta Mater., 58 (2008) 743. [129] K. Otsuka, C.M. Wayman, Shape Memory Materials, Cambridge University Press, 1998. [130] T. Fukuda, T. Saburi, K. Doi, S. Nenno, Mater. Trans. JIM, 33 (1992) 271. [131] Y. Murakami, K. Otsuka, S. Hanada, S. Watanabe, Mater. Trans. JIM, 33 (1992) 282. [132] Y. Murakami, T. Ohba, K. Morii, S. Aoki, K. Otsuka, Acta Mater., 55 (2007) 3203. [133] M. Nishida, T. Nishiura, H. Kawano, T. Inamura, Philos. Mag., 92 (2012) 2215. [134] S.C. Mao, X.D. Han, J.F. Luo, Z. Zhang, Mater. Lett., 59 (2005) 3567. [135] J.F. Luo, S.C. Mao, X.D. Han, Z. Zhang, J. Wu, M.H. Wu, J. Appl. Phys., 102 (2007) 043526. [136] D.J. Prior, P.W. Trimby, U.D. Weber, D.J. Dingley, Mineral. Mag., 60 (1996) 859. [137] A.J. Wilkinson, P.B. Hirsch, Micron, 28 (1997) 279. [138] C. Trager-Cowan, F. Sweeney, P.W. Trimby, A.P. Day, A. Gholinia, N.H. Schmidt, P.J. Parbrook, A.J. Wilkinson, I.M. Watson, Phys. Rev. B, 75 (2007) 085301. [139] Y.N. Picard, M.E. Twigg, J.D. Caldwell, C.R. Eddy, P.G. Neudeck, A.J. Trunek, J.A. Powell, J. Electron. Mater., 37 (2008) 691. [140] A.P. Boyle, D.J. Prior, M.H. Banham, N.E. Timms, Miner. Deposita, 34 (1998) 71. [141] C. Franke, G.M. Pennock, M.R. Drury, R. Engelmann, D. Lattard, J.F.L. Garming, T. von Dobeneck, M.J. DekkerS, Geophys. J. Int'l, 170 (2007) 545. [142] K. Freitag, A.P. Boyle, E. Nelson, M. Hitzman, J. Churchill, M. Lopez-Pedrosa, Miner. Deposita, 39 (2004) 103. [143] P.W. Trimby, D.J. Prior, Tectonophysics, 303 (1999) 71. [144] G.G.E. Seward, S. Celotto, D.J. Prior, J. Wheeler, R.C. Pond, Acta Mater., 52 (2004) 821. [145] D. Schryvers, P.L. Potapov, Mater. Trans., 43 (2002) 774. [146] D. Schryvers, P.L. Potapov, J. Phys. IV, 112 (2003) 751. [147] H. Sitepu, Textures and Microstructures, 35 (2003) 185. [148] H. Sitepu, H.G. Brokmeier, D. Chateigner, J.P. Wright, Sol. Stat. Phen., 105 (2005) 139. [149] S.K. Wu, C.M. Wayman, Acta Metall. Mater., 37 (1989) 28053. [150] K. Otsuka, Ren, X., Prog. Mater. Sci., 50 (2005) 511. [151] S. Miyazaki, C.M. Wayman, Acta Metal.l Mater., 36 (1988) 181. [152] Y.Q. Fu, S. Zhang, M.J. Wu, W.M. Huang, H.J. Du, J.K. Luo, A.J. Flewitt, W.I. Milne, Thin Solid Films, 515 (2006) 80. [153] W. Tirry, D. Schryvers, K. Jorissen, D. Lamoen, Acta Crystallogr. B, 62 (2006) 966. [154] T. Tadaki, Y. Nakata, K. Shimizu, K. Otsuka, Trans. JIM, 27 (1986) 731. [155] A.M. Handbooks, Binary Alloy Phase Diagrams, 2nd ed., ASM International, Ohio, 1990. [156] H. Funakubo, Shape memory alloys, Gordon and Breach Science Publishers, New York, 1987. [157] J. M. Silcock, T. J. Heal, and H. K. Hardy, J. Inst. Met., 82 (1953-54) 239. [158] A. Deschamps, F. Livet, Y. Brechet, Acta Mater., 47 (1998) 281. [159] C.H. Chen, S.Y. Cheng, S.K. Wu, Intermetallics, 36 (2013) 109. [160] K.H. Chang, S.K. Wu, S.H. Chang, Thin Solid Films, 519 (2011) 5302. [161] A. Ishida, M. Sato, Philos. Mag., 87 (2007) 5523. [162] A. Ishida, M. Sato, K. Ogawa, Philos. Mag., 88 (2008) 2427. [163] T.H. Nam, T. Saburi, K. Shimizu, Mater. Trans. JIM, 31 (1990) 959. [164] Y.C. Lo, S.K. Wu, H.E. Horng, Acta Metall. Mater., 41 (1993) 747. [165] C.A. Schuh, T.G. Nieh, Acta Mater., 51 (2003) 87. [166] A. Ishida, M. Sato, K. Ogawa, Phil. Mag. Lett., 86 (2006) 13. [167] D.V. Louzguine, A. Inoue, J. Mater. Sci., 35 (2000) 4159. [168] Y.X. Tong, Y. Liu, Z.L. Xie, M. Zarinejad, Acta Mater., 56 (2008) 1721. [169] H. Rosner, P. Schlossmacher, A.V. Shelyakov, A.M. Glezer, Acta Mater., 49 (2001) 1541. [170] C.H. Chen, S.K. Wu, C.Y. Lai, Mater. Sci. Eng. A, 613 (2014) 317. [171] R. Liu, D.Y. Li, Y.S. Xie, R. Llewellyn, H.M. Hawthorne, Scripta Mater., 41 (1999) 691. [172] W.Y. Ni, Y.T. Cheng, D.S. Grummon, Appl. Phys. Lett., 82 (2003) 2811. [173] A.C. Fischer-Cripps, Nanoindentation, 3rd ed., Springer, 2011. [174] C.Y. Nien, H.K. Wang, C.H. Chen, S. Ii, S.K. Wu, C.H. Hsueh, J. Mater. Res., 29 (2014) 2717. [175] C.P. Frick, T.W. Lang, K. Spark, K. Gall, Acta Mater., 54 (2006) 2223. [176] H. Sehitoglu, I. Karaman, X. Zhang, H. Kim, Y. Chumlyakov, H.J. Maier, I. Kireeva, Metall. Mater. Trans. A, 32 (2001) 477. [177] D. Tabor, J. Inst. Met., 79 (1951) 1. [178] M.A. Krivoglaz, Theory of X-ray and Thermal-Neutron Scattering by Real Crystals, Plenum Press, New York, 1969. [179] M.I. Solovyova, D.M. Shtern, É.V. Kozlov, Russian Phys. J., 45 (2002) 372. [180] M.I. Solovyova, D.M. Shtern, É.V. Kozlov, Russian Phys. J., 45 (2002) 365. [181] J. Bernardini, C. Lexcellent, L. Daróczi, D.L. Beke, Philo. Mag., 83 (2003) 329. [182] P. Donner, R. Würschum, E. Hornbogen and H. E. Schaefer, Scr. Metall. Mater., 25 (1991) 1875. [183] X.B. Ren, K. Otsuka, Philos. Mag. A, 80 (2000) 467. [184] S.I. Wright, M.M. Nowell, Microsc. Microanal., 12 (2006) 72. [185] D.J. Dingley, D.P. Field, Mater. Sci. Tech. Ser., 13 (1997) 69. [186] H.J. Bunge, Texture Analysis in Materials Science: Mathematical Methods, Cuvillier Press, 1993. [187] D.Y. Cong, Y.D. Zhang, Y.D. Wang, C. Esling, X. Zhao, L. Zuo, J. Appl. Crystallogr., 39 (2006) 723. [188] S.C. Mao, J.F. Luo, Z. Zhang, M.H. Wu, Y. Liu, X.D. Han, Acta Mater., 58 (2010) 3357. [189] S.C. Mao, X.D. Han, Y.B. Tian, J.F. Luo, Z. Zhang, Y. Ji, M.H. Wu, Mat. Sci. Eng. A, 498 (2008) 278. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/54424 | - |
dc.description.abstract | 本研究利用快速凝固製程(RSP)製備富鈦鈦鎳形狀記憶合金箔帶(ribbon),並針對其麻田散體相變態、顯微結構、析出硬化以及形狀記憶特性進行探討。本研究所使用之試片包含Ti50.4Ni49.5Si0.1, Ti50.1Ni49.7Si0.2, Ti50.6Ni39.4Cu9.8Si0.2 and Ti50Ni25Cu25合金箔帶之性能。此外,本研究也包含高含鈦量之Ti50.92Ni48.94Si0.14箔帶中富鈦GP區(GP zone)析出物之顯微結構觀察。Ti50.4Ni49.5Si0.1及Ti50.1Ni49.7Si0.2此兩種合金箔帶於噴鑄狀態(as-spun)下包含大量奈米級Ti2Ni析出物,而經過500 ºC時效後皆產生未曾於塊材(bulk)富鈦鈦鎳形狀記憶合金中發現之R相相變態以及Ti3Ni4析出物。此奈米級Ti2Ni及Ti3Ni4析出物可有效產生析出硬化效果,強化箔帶之強度並且提升其形狀記憶特性。利用奈米壓痕超彈性試驗顯示Ti50.4Ni49.5Si0.1及Ti50.1Ni49.7Si0.2此兩種箔帶於50 mN之力量下皆有高於78 %之回復量,其性能較被報導的Ti49.8Ni50.2合金優異。Ti50.6Ni39.4Cu9.8Si0.2箔帶於噴鑄狀態僅部分結晶,其於550 ºC時結晶化並熱處理15分鐘後更可得到高達6.2%的形狀記憶效性回復量。Ti50Ni25Cu25箔帶於噴鑄狀態為非晶質,經過於500 ºC時結晶化並熱處理15分鐘後,由奈米壓痕超彈性測試可於2.5~3.0 GPa之平均壓力下達到最明顯之超彈性表現。由Ti50.92Ni48.94Si0.14箔帶中富鈦GP區析出物之顯微結構觀察,其結構為序化之C11b Ti2Ni以及Ti5Ni3兩次結構所組成,造成其繞射圖譜於0.4 q001及0.7 q001處有產生額外之繞射點。研究結果顯示利用RSP製成製造鈦鎳基形狀記憶合金薄帶可有效提升鈦鎳基形狀記憶合金之性能並得到優良的形狀記憶特性。透過利用電子背向散射繞射(EBSD)技術觀察R像自我調適行為(self-accommodation)提供更高解析度並且觀察不受晶粒方位所限制,可以更快速地分析R向自我調適之行為。 | zh_TW |
dc.description.abstract | Characteristics of aging treatments, transformation sequence, phase identification, microstructures, precipitation hardening and shape memory performances of melt-spun Ti50.4Ni49.5Si0.1, Ti50.1Ni49.7Si0.2, Ti50.6Ni39.4Cu9.8Si0.2 and Ti50Ni25Cu25 ribbons were studied. Ti50.4Ni49.5Si0.1, Ti50.1Ni49.7Si0.2 and Ti50.6Ni39.4Cu9.8Si0.2 ribbons show significant precipitation hardening by GP zones and/or nanoscale Ti2Ni/Ti3Ni4 precipitates after aging treatment, which result in excellent shape memory performance. The recovery of both Ti50.4Ni49.5Si0.1 and Ti50.1Ni49.7Si0.2 ribbons during pseudoelasticity tests are higher than 78 % under nanoindentation load of 50 mN, which is significantly higher than conventional bulk Ti49.8Ni50.2 alloy. Additionally, the microstructure, precipitation phenomenon and shape memory properties of TiNiSi ribbons are found closely related to the slight variation of Ti/Ni ratio and Si content. For Ti50.6Ni39.4Cu9.8Si0.2 ribbon, shape memory effect with 6.2 % recoverable strain is obtained after crystallized and aged at 550 ºC for 15 min. Amorphous Ti50Ni25Cu25 ribbon becomes well-crystalized after being treated at 500 ºC for 15 min and shows pronounced pseudoelasticity response under average contact pressure between 2.5-3.0 GPa. The structure of GP zones in Ti-rich Ti50.92Ni48.94Si0.14 ribbon was studied and a hybrid structure composed of C11b Ti2Ni and Ti5Ni3 substructures is proposed to explain the appearance of these extra diffuse streaks. Experimental results indicate that performance of TiNi-based shape memory alloys can be effectively enhanced by fabricating the alloys with rapid solidification process. The self-accommodation morphologies of R-phase variants studied by an EBSD system provide a fast and high resolution method to study twinning relationship between R-phase variants. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T02:56:07Z (GMT). No. of bitstreams: 1 ntu-104-D01527006-1.pdf: 10634503 bytes, checksum: 4c3949b26f3a9f68133d31bf5c64fae3 (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | Abstract i
摘要 iii Content v Chapter 1 Introduction 1 Chapter 2 Literature Review 5 2-1 TiNi-based Shape Memory Alloys 5 2-2 Phase Transformation Sequence in TiNi binary SMAs 7 2-2-1 One-stage Phase Transformation 7 2-2-2 Two-stage Phase Transformation 8 2-2-3 Multi-stage Phase Transformation 8 2-2-4 Adjustment of Transformation Temperatures 11 2-3 Shape Memory Effect (SME) 12 2-4 Pseudoelasticity (PE) 13 2-5 Rapid Solidification Process 14 2-6 Ti-rich Precipitates in Ti-Ni SMAs 17 2-6-1 Bulk Ti-rich TiNi SMAs Prepared by VAR 17 2-6-2 Ti-rich TiNi SMAs Thin Films Prepared by Sputtering 17 2-6-3 Ti-rich TiNi SMAs Ribbons Prepared by RSP 20 2-7 Nanoindentation Test 21 2-7-1 Origin of Nanoindentation 21 2-7-2 Nanoindenter 22 2-7-3 Analytical Model of Nanoindentation 23 2-7-4 Application of Nanoindention in SMAs 27 2-8 Observations of Self-accommodated R-phase Morphologies and The Crystallography of Trigonal R-phase 31 Chapter 3 Experimental Procedures 69 3-1 For The Properties of TiNi-based Ribbons 69 3-1-1 Preparation of Ribbons 69 3-1-2 Aging Treatment 69 3-1-3 Differential Scanning Calorimetry (DSC) Tests 70 3-1-4 SEM Observations 70 3-1-5 TEM Observations 71 3-1-6 X-ray Diffraction Spectra 71 3-1-7 SME Tests 71 3-1-8 Nanoindentation Hardness 72 3-1-9 Nanoindentation PE Tests 73 3-2 For The EBSD Observations of R-phase 73 3-2-1 Specimen Preparation 73 3-2-2 SEM and EBSD Apparatus 74 Chapter 4 Characteristics of TiNi-based Ribbons 81 4-1 Precipitation Hardening of Ti-rich Ti50.4Ni49.5Si0.1 Shape Memory Ribbons 81 4-1-1 DSC Results 81 4-1-2 XRD Results 83 4-1-3 Nanoindentation Hardness Measurements 83 4-1-4 TEM Observations 85 4-1-5 The SME and PE Properties of Aged Ti50.4Ni49.5Si0.1 Ribbons 87 4.1.6 Discussion of the Precipitation Hardening of Aged Ti50.4Ni49.5Si0.1 Ribbons 90 4-2 Properties of Aged Ti50.1Ni49.7Si0.2 Shape Memory Ribbons 91 4-2-1 DSC Results 91 4-2-2 TEM Microstructural Observations 93 4-2-3 Nanoindentation Hardness Measurement 94 4-2-4 Pseudoelasticity 95 4-2-5 The Effect of Composition on The Properties of TiNi Ribbons 97 4-3 The Characteristics of Precipitation Hardening and the Shape Memory Effect in Aged Ti50.6Ni39.4Cu9.8Si0.2 Shape Memory Ribbons 102 4-3-1 As-spun Ti50.6Ni39.4Cu9.8Si0.2 ribbon 102 4-3-2 Aged Ti50.6Ni39.4Cu9.8Si0.2 Ribbons 103 4-3-3 Nanoindentation Hardness Measurement 106 4-3-4 TEM Microstructure Observations 108 4-3-5 Shape Memory Effect (SME) 111 4-4 Pseudoelasticity Response of Aged Ti50Ni25Cu25 Shape Memory Ribbon under Nanoindentation Tests 115 4-4-1 Transformation behavior of aged Ti50Ni25Cu25 ribbons 115 4-4-2 Nanoindentation hardness 118 4-4-3 Pseudoelasticity 119 4-5 A Study of the Structure of GP Zones in Ti-rich TiNi Shape Memory Melt-spun Ribbons 127 4-5-1 Experimental Results 127 4-5-2 The Reported BCT Structure for GP zones 130 4-5-3 A Hybrid Structure for the GP zones Composed of Ordered C11b Ti2Ni and Ti5Ni3 Substructures 131 4-5-4 The Influence of Local Point Defects 134 Chapter 5 Observations of Self-accommodated R-phase in a Ti50.3Ni48.2Fe1.5 Shape Memory Alloy by SEM-EBSD System 175 5-1 Transformation Behavior of Ti50.3Ni48.2Fe1.5 SMA 175 5-2 Observations of R-phase Morphologies 175 5-3 Indexing Kikuchi Patterns and Determining Plane Traces 178 5-4 Herring-bone Morphology Formed by Four R-phase Variants 180 5-5 River-like Morphology 182 5-6 Vertical Stripe-type Morphology Formed by Two R-phase Variants 183 5-7 Intersection of a Stripe-type and a Large-angle Herring-bone Morphologies 184 5-8 Self-accommodation Morphology at the Grain Boundary 186 Chapter 6 Conclusions 199 6-1 Characteristics of TiNi-based Shape Memory Ribbons 199 6-2 Structure of GP zones in Ti-rich TiNi Shape Memory Ribbons 204 6-3 Self-accommodation Morphologies of Trigonal R-phase 204 References 207 Publications 221 | |
dc.language.iso | en | |
dc.title | TiNi基形狀記憶合金箔帶之性能以及R相自我調適行為之研究 | zh_TW |
dc.title | The Characteristics of Ribbons and the Self-accommodation of R-phase in TiNi-based Shape Memory Alloys | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 林新智,胡塵滌,周棟勝,張世航 | |
dc.subject.keyword | 鈦鎳形狀記憶合金,箔帶,析出硬化,奈米壓痕,GP區,自我調適行為,電子背向散射繞射, | zh_TW |
dc.subject.keyword | TiNi Shape Memory Alloy,Ribbon,Precipitation Hardening,Nanoindentation,GP zone,Self-accommodation,Electron Backscattering Diffraction (EBSD), | en |
dc.relation.page | 224 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2015-07-08 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 10.39 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。