Please use this identifier to cite or link to this item:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/54254Full metadata record
| ???org.dspace.app.webui.jsptag.ItemTag.dcfield??? | Value | Language |
|---|---|---|
| dc.contributor.advisor | 羅俊雄(Chin-Hsiung Loh) | |
| dc.contributor.author | Wei-Ting Hsu | en |
| dc.contributor.author | 許維廷 | zh_TW |
| dc.date.accessioned | 2021-06-16T02:46:56Z | - |
| dc.date.available | 2017-08-16 | |
| dc.date.copyright | 2015-08-16 | |
| dc.date.issued | 2015 | |
| dc.date.submitted | 2015-07-16 | |
| dc.identifier.citation | [1] Chung, L. L., “Course note on structural control (II),” National Taiwan University, Department of Civil Engineering (2010).
[2] Chen, M. C., “Application of Stochastic Subspace Identification in Bridge Structure Health Monitoring,” M.E. Thesis, National Taiwan University (2012). [3] Chan, C. K., “Vibration-based Structural Identification: Global and Local Dynamic Characteristics,” M.E. Thesis, National Taiwan University (2015). [4] Döhler, M., Mevel, L., “Efficient multi-order uncertainty computation for stochastic subspace identification,” Mechanical Systems and Signal Processing, 38(2), 346-366 (2014). [5] Döhler, M., Lam, X. and Mevel, L., “Uncertainty quantification for modal parameters from stochastic subspace identification on multi-setup measurements,” Mechanical Systems and Signal Processing, 36(2), pp.562-581 (2013). [6] Döhler, M., Hille, F., Mevel, L. and Rücker, W., “Structural health monitoring with statistical methods during progressive damage test of S101 Bridge,” Engineering Structures, 69, pp.183-193 (2014). [7] Fan, J., Zhang, Z. and Hua, H., “Data processing in subspace identification and modal parameter identification of an arch bridge,” Mechanical Systems and Signal Processing, 21(4), pp.1674-1689 (2007). [8] Hsiung. W. Y., “Vibrational Analysis and Damage Detection of a Research-scale Wind Turbine Blade,” M.E. Thesis, National Taiwan University (2014). [9] Hsu, W. T., Loh, C. H., Chao, S. H., “Uncertainty Calculation for Modal Parameters Used with Stochastic Subspace Identification: An Application to a Bridge Structure”, Proc. SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, 94350Q (March 27, 2015) [10] Juang, J. N., “Applied system identification,” Englewood Cliffs, N.J.: Prentice Hall, (1994). [11] Loh, C. H. and Duh, J. Y., “Analysis of Nonlinear System Using Narma Models,” Doboku Gakkai Ronbunshu, (537), pp.11-21 (1996). [12] Lu, K. C., “Development of Smart Structural System for Civil Infrastructure: Sensing and Control,” Ph.D. Dissertation, National Taiwan University (2010). [13] Liu, Y. C., “Application of Covariance Driven Stochastic Subspace Identification Method,” M.E. Thesis, National Taiwan University (2011). [14] Mrabet, E., Abdelghani, M., Ben Kahla, N., “A New Criterion for the Stabilization Diagram Used with Stochastic Subspace Identification Methods: An Application to an Aircraft Skeleton,” Shock and Vibration, 1-8 (2014). [15] Moaveni, B. and Asgarieh, E., “Deterministic-stochastic subspace identification method for identification of nonlinear structures as time-varying linear systems,” Mechanical Systems and Signal Processing, 31, pp.40-55 (2012). [16] Overschee, P. and Moor, B., “Subspace identification for linear systems,” Boston: Kluwer Academic Publishers (1996). [17] Pintelon, R., Guillaume, P. and Schoukens, J., “Uncertainty calculation in (operational) modal analysis,” Mechanical Systems and Signal Processing, 21(6), pp.2359-2373 (2007). [18] Peeters, B. and De Roeck, G., “Reference based stochastic subspace identification in civil engineering,” Inverse Problems in Engineering, 8(1), pp.47-74 (2000). [19] Pintelon, R., Guillaume, P., Schoukens, J., “Uncertainty calculation in (operational) modal analysis,” Mech. Syst. Signal Process. 21(6), 2359–2373 (2007). [20] Peeters, B. and De Roeck, G., “Reference-based Stochastic Subspace Identification for Output-only Modal Analysis,” Mechanical Systems and Signal Processing, 13(6), pp.855-878 (1999). [21] Pappa, R., Elliott, K. and Schenk, A., “Consistent-mode indicator for the eigensystem realization algorithm,” Journal of Guidance, Control, and Dynamics, 16(5), pp.852-858 (1993). [22] Reynders, E., Houbrechts, J., De Roeck, G., “Fully automated (operational) modal analysis,” Mechanical Systems and Signal Processing, 29, 228-250 (2012). [23] Reynders, E., Pintelon, R., De Roeck, G., “Uncertainty bounds on modal parameters obtained from stochastic subspace identification,” Mechanical Systems and Signal Processing, 22(4), 948-969 (2008). [24] Tseng, M. H., “Structural Damage Detection Based on the Measurement of Direct Response,” Master Thesis, National Taiwan University, June 2013. [25] Tondreau, G. and Deraemaeker, A., “Numerical and experimental analysis of uncertainty on modal parameters estimated with the stochastic subspace method,” Journal of Sound and Vibration, 333(18), pp.4376-4401 (2014). [26] Van Overschee, P. and De Moor, B., “Subspace Identification for Linear Systems: Theory-Implementation-Applications,” Kluwer Academic Publishers, Dordrecht, The Netherlands (1996). [27] Verhaegen, M., “Identification of the deterministic part of MIMO state space models given in innovations form from input-output data,” Automatica, 30(1), pp.61-74 (1994). [28] Willems, J., “From time series to linear system—Part I. Finite dimensional linear time invariant systems,” Automatica, 22(5), pp.561-580 (1986). [29] Weng, J. H., “Application of Subspace Identification in System Identification and Structural Damage Detection,” Ph.D. Dissertation, National Taiwan University (2010). [30] Yan, A. M. and Jean-Claude G., “Null subspace-based damage detection of structures using vibration measurements,” Mechanical Systems and Signal Processing, Vol: 20, 611–626 (2006). [31] Yang, Y. and Nagarajaiah, S., “Data Compression of Structural Seismic Responses via Principled Independent Component Analysis,” Journal of Structural Engineering, 140(7), p.04014032 (2014). [32] Yun, G., Lee, S. and Shang, S., “An improved mode accuracy indicator for Eigensystem Realization Analysis (ERA) techniques,” KSCE J Civ Eng, 16(3), pp.377-387 (2012). [33] Zhang, G., Tang, B. and Tang, G., “An improved stochastic subspace identification for operational modal analysis,” Measurement, 45(5), pp.1246-1256 (2012). [34] Zhang, G., Ma, J., Chen, Z. and Wang, R., “Automated eigensystem realisation algorithm for operational modal analysis,” Journal of Sound and Vibration, 333(15), pp.3550-3563 (2014). | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/54254 | - |
| dc.description.abstract | 對於線性非時變系統的監測，操作型模態分析在過去已被證明為一種有效的分析方式，隨機子空間識別法更是其中一強大的演算法。綜觀來說，此識別法所預測出的系統模態參數會被其統計上的不確定性所影響，如：不確定的量測噪音形式、不穩定的震動形式以及有限的量測點等等，所以其分析的結果將隱含著誤差。穩態圖能夠透過比較不同的系統階數幫助使用者識別正確的模態參數，換句話說，其能夠將具有物理意義的極點與奇異的極點分開供使用者參考。
在傳統隨機子空間識別法中，決定演算法的參數如：系統階數、漢克矩陣的列數以及清除奇異極點的準則值時，通常太過主觀。為了減少人為操作，此研究提出了一自動化的隨機子空間識別法。 首先，此自動化的演算法將套用至協方差型隨機子空間識別法。這裡使用一套系統化的檢視機制來選擇含有物理意義極點的準則值。第二，統計學的分群法將被應用於區分物理極點和奇異極點。最後，在穩態圖上不同系統階數上的每個模態極點將能算出其信賴區間，以幫助估計系統的自然頻率和阻尼比。此分析方法將應用於：(一)運作中的三垮鋼構橋、(二)橋樑沖刷實驗、(三)三層樓鋼構架之震動台實驗。其分別代表不同的系統狀態：(一)非時變系統、(二)時變系統、(三)非線性系統。 資料型子空間識別法以及頻率域分解法也將應用於此研究的量測資料作為參考。最後，結構物破壞檢測的方法將應用於更加深入的分析。總而言之，此研究證明了其所提出的自動型隨機子空間識別法應用於結構物健康檢測是一更穩定且高信賴度的方法。 | zh_TW |
| dc.description.abstract | Operational modal analysis has been proven to be an efficient tool for the identification of liner-time-invariant system using multivariate measurements. In particular, Stochastic Subspace Identification (SSI) is one of the powerful algorithms in structural health monitoring (SHM). Generally, the estimated modal parameters through SSI may be afflicted with statistical uncertainty, e.g. undefined measurement noises, non-stationary excitation, environmental condition, finite number of data samples, and etc. Therefore, the identified results are subjected to variance errors. Accordingly, the concept of the system stabilization diagram can help users to identify the correct modes, i.e. through physical criteria to remove the spurious modes. Modal parameters can be estimated at successive model orders where the physical modes of the system are extracted and separated from the spurious modes.
Another issue has been raised on the subjective judgement of selecting the pre-defined parameters, i.e. the modal orders, row length of data Hankel matrix and threshold values of criteria on stabilization diagram. To avoid relying on engineer judgment when conducting SSI, an automated SSI algorithm is developed and discussed in this thesis. First of all, the identification of modal parameters through covariance-driven stochastic subspace identification (SSI-COV) from the output-only measurements is applied with the automated scheme. A systematic way of investigation on the criteria for the stabilization diagram is presented. Secondly, a statistical approach is utilized to separate physical modes from spurious modes. Finally, the computation of uncertainty bounds for each mode with all model order in the stabilization diagram is presented to determine system natural frequencies and damping ratios. Demonstration of this study on the system identification of: (1) a three-span steel bridge under operation condition, (2) an experimental bridge scouring test and (3) a 3-story steel frame under a series of shaking table tests are presented. Each case study represented a different condition of system including: (1) a time-invariant system, (2) a time-variant system and (3) a nonlinear system, respectively. Several system identification tools such as the data-driven Subspace Identification (SI-DATA) and Frequency Domain Decomposition (FDD), are also applied to help users to recognize the results of the proposed algorithm. Moreover, further assessment of structural damage severity can be proceeded through damage detection methods. All in all, it is shown that the proposed new operation procedure for the automated covariance-driven stochastic subspace identification can enhance the robustness and reliability in structural health monitoring. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-16T02:46:56Z (GMT). No. of bitstreams: 1 ntu-104-R02521247-1.pdf: 17159475 bytes, checksum: 024541dd8a1c30d66c633c1dd5ee7e2c (MD5) Previous issue date: 2015 | en |
| dc.description.tableofcontents | Acknowledgement I
Abstract (in Chinese) II Abstract (in English) III Table of Contents V Table List IX Figure List X Chapter 1 Introduction 1 1.1 Background 1 1.2 Research objectives 2 Chapter 2 System Identification Methodology 5 2.1 Stochastic Subspace Identification (SSI) 5 2.1.1 State-space model 5 2.1.1.1 Continuous-time state-space model 5 2.1.1.2 Discrete-time state-space model 7 2.1.1.3 Stochastic state-space model 8 2.1.1.4 Stochastic process 10 2.1.2 Covariance-driven Stochastic Subspace Identification (SSI-COV) 11 2.1.2.1 Reference-based SSI-COV 11 2.1.2.2 Extracting modal parameters 13 2.2 Subspace Identification (SI) 14 2.2.1 Combined deterministic-stochastic system 14 2.2.2 Data-driven Subspace Identification (SI-DATA) 16 2.3 Stabilization diagram 18 2.4 Sensitivity study 19 2.5 Frequency Domain Decomposition (FDD) 20 2.6 Indices of structure’s status 22 2.6.1 Damage detection 22 2.6.2 Detection of system nonlinearity 23 2.7 Inverse method for stiffness matrix 24 Chapter 3 Automated SSI-COV Algorithm 25 3.1 Quality optimization of stabilization diagram 25 3.1.1 Criteria based on mathematical features 25 3.1.2 Criteria based on stability of modal parameters 28 3.1.3 Clustering identified poles 30 3.2 Grouping of modes 31 3.2.1 Cataloging similar modes 31 3.2.2 Identifying physical clusters 32 3.3 Calculation of indicating modal parameters 33 3.3.1 Uncertainty estimation 33 3.3.2 Weighted average algorithm 38 Chapter 4 Experimental Verification 40 4.1 Application to time-invariant data (Guan-Du Bridge) 40 4.1.1 Set-up of monitoring system 40 4.1.2 Pre-processing procedure 41 4.1.3 Identification results 41 4.2 Application to time-variant data (experimental bridge scouring test) 44 4.2.1 Setup of monitoring system 44 4.2.2 Pre-processing procedure 45 4.2.3 Identification results 45 4.2.4 Discussion 47 4.2.4.1 Shifting frequency phenomenon in stabilization diagram 47 4.2.4.2 Complex mode shapes 48 4.3 Application to seismic response data with non-linear characteristics (3-floor steel frame) 49 4.3.1 Set-up of monitoring system 49 4.3.2 Pre-processing procedure 50 4.3.3 Identification results 51 4.3.3.1 Analysis with Automated SSI-COV 51 4.3.3.2 Analysis with SI-DATA 54 4.3.3.3 Results of Null-subspace Damage Index 55 4.3.3.4 Results of Nonlinearity Index 56 4.3.3.5 Results of Inverse method for stiffness matrix 57 Chapter 5 Conclusions 59 5.1 Conclusions 59 5.2 Future work 62 References 64 Tables 70 Figures 76 Appendix I 120 Appendix II 124 | |
| dc.language.iso | en | |
| dc.subject | 不確定性區間 | zh_TW |
| dc.subject | 結構物健康檢測 | zh_TW |
| dc.subject | 分群法 | zh_TW |
| dc.subject | 損害識別 | zh_TW |
| dc.subject | 穩態圖 | zh_TW |
| dc.subject | 隨機子空間識別法 | zh_TW |
| dc.subject | 損害識別 | zh_TW |
| dc.subject | 結構物健康檢測 | zh_TW |
| dc.subject | 不確定性區間 | zh_TW |
| dc.subject | 分群法 | zh_TW |
| dc.subject | 穩態圖 | zh_TW |
| dc.subject | 隨機子空間識別法 | zh_TW |
| dc.subject | damage detection | en |
| dc.subject | Stochastic Subspace Identification | en |
| dc.subject | stabilization diagram | en |
| dc.subject | clustering | en |
| dc.subject | uncertainty bounds | en |
| dc.subject | structural health monitoring | en |
| dc.subject | damage detection | en |
| dc.subject | Stochastic Subspace Identification | en |
| dc.subject | stabilization diagram | en |
| dc.subject | clustering | en |
| dc.subject | uncertainty bounds | en |
| dc.subject | structural health monitoring | en |
| dc.title | 自動型操作模態分析應用於隨機子空間識別法 | zh_TW |
| dc.title | Automatic (operational) modal analysis for Stochastic Subspace Identification | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 103-2 | |
| dc.description.degree | 碩士 | |
| dc.subject.keyword | 隨機子空間識別法,穩態圖,分群法,不確定性區間,結構物健康檢測,損害識別, | zh_TW |
| dc.subject.keyword | Stochastic Subspace Identification,stabilization diagram,clustering,uncertainty bounds,structural health monitoring,damage detection, | en |
| dc.relation.page | 130 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2015-07-17 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
| Appears in Collections: | 土木工程學系 | |
Files in This Item:
| File | Size | Format | |
|---|---|---|---|
| ntu-104-1.pdf Restricted Access | 16.76 MB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.