請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/53061
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林怡成 | |
dc.contributor.author | Tzu-Chien Huang | en |
dc.contributor.author | 黃子謙 | zh_TW |
dc.date.accessioned | 2021-06-15T16:42:00Z | - |
dc.date.available | 2020-08-31 | |
dc.date.copyright | 2015-08-31 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-08-11 | |
dc.identifier.citation | [1]T. S. Rappaport, S. Sun, R. Mayzus, H. Zhao, Y. Azar, K. Wang, G. N. Wong, J. K. Schulz, M. Samimi, and F. Gutierrez, “Millimeter wave mobile communications for 5G cellular: It will work!,”IEEE Access, vol. 1, pp. 335-349, Aug. 2013. [2] S. Hwang, D. Lyu, and K. Chang, “4G vision and technology development in Korea,” in Proc.IEEE. Int. Conf. Commun. Technol., vol. 1, pp. 26-27, Apr. 2003. [3] H. Y. Kim, J. H. Lee, I. S. Song, and C. S. Park, “Compact LTCC Yagi-Uda type end-fire antenna-in-package for 60 GHz wireless communications,”IEEE MTT-S Int.Symp. Dig.,Tampa, FL,pp.1-3, Jun. 2014. [4] X. Bao, Y. Guo, and S. Hu, “A 60-GHz Differential on-chip Yagi antenna using 0.18-µm CMOS technology,”IEEE Asia-Pacific Conf.Antennas Propag.,Singapore,pp.277-278, Aug.2012. [5] A. Natarajan, A. Komijani, G. Xiang, A. Babakhani, and A. Hajimiri, “A 77-GHz phased-array transceiver with on-chip antennas in silicon transmitter and local lO-path phase shifting,”IEEE J.Solid-State Circuits,vol.41, no. 12, pp.2807-2819, Dec.2016. [6] U. R Pfeiffer, J. Grzyb, D. Liu, B. Gaicher, T. Beukema, B. A. Floyd, and S. K. Reynolds, “A chip-scale packaging technology for 60-GHz wireless chipsets,” IEEE Trans.Microw. Theory Tech., vol. 54, no. 8, pp.3387-3397, Aug.2006. [7] Y. P. Zhang, M. Sun, and L. H. Guo, “On-chip antennas for 60-GHz radios in silicon technology,” IEEE Trans. Electron Devices, vol. 52, no. 7, pp.1664-1668, Jul. 2005. [8] Y. P. Zhang, and D. Liu,“Antenna-on-chip and antenna-in-package solutions to highly integrated millimeter-wave devices for wireless communication,” IEEE Trans. Antennas Propag., vol. 57, no. 10, pp.2830-2841, Oct. 2009. [9] Y. P. Zhang, M. Sun, K.M. Chua, L. L. Wai, and D. Liu, “Antenna-in-package design for wirebond interconnection to highly integrated 60-GHz radios,”IEEE Trans. Antennas Propag., vol. 57, no. 10, pp.2842-2852, Oct. 2009. [10] Y. P. Zhang, M. Sun, and W. Lin, “Novel antenna-in-package design in LTCC for single chip transceiver,” IEEE Trans. Antennas Propag., vol. 56, no. 7, pp.2079-2088, Jul. 2008. [11] Y. Tsutsumi, T. Ito, K. Hashimoto, S. Obayashi, H. Sholi, and H. Kasami, “Bonding wire loop antenna in standard ball grid array package for 60-GHz short-range wireless communication,”IEEE Trans. Antennas Propag., vol. 61, no. 4, pp.1557-1563, Apr. 2013. [12] A. Enayati, G .A .E. Vandenbosch, and W. Deraedt, “Millimeter-wave horn-type antenna-in-package solution fabricated in a teflon-based multilayer PCB technology,”IEEE Trans. Antennas Propag., vol. 61, no. 4, pp.1581-1590, Apr. 2013. [13] A. Enayati, S. Brebels, W. Deraedt, and G .A .E. Vandenbosch, “Vertical via-less transition in MCM technology for millimeter-wave applications,” Electron. Lett., vol.46, no. 4, pp.287-288, Feb.2010. [14] Y. P. Zhang, M. Sun, D. Liu, and Y. Lu, “Dual grid array antennas in a thin-profile package for flip-chip interconnection to highly integrated 60-GHz radios,”IEEE Trans. Antennas Propag., vol. 59, no. 4, pp.1191-1199, Apr. 2011. [15] A. Enayati, W. Deraedt, and G .A .E. Vandenbosch, “Antenna in package solution for millimeter-wave applications: slotted-patch in a multilayer PCB,” IEEE Antennas Propag. Soc. Int. Symp.,Chicago, IL,pp. 1-2, Jul.2012. [16] A. Enayati, W. Deraedt, and G .A .E. Vandenbosch, “End-fire antenna-in-package solution for millimeter-wave applications in a Teflon-based PCB technology,” in Proc, European Microwave Conf.,Nuremberg, pp. 48-51, Oct.2013. [17] N. Ghassemi, and K. Wu, “Millimeter-wave integrated pyramidal horn antenna made of multilayer printed circuit board (PCB) process,” IEEE Trans. Antennas Propag., vol. 60, no. 9, pp. 4432-4435, Sep. 2012. [18] A. E .I . Lamminen, J. Saily, and A. R. Vimpari, “60-GHz patch antennas and arrays on LTCC with embedded-cavity substrates,” IEEE Trans. Antennas Propag., vol. 56, no. 9, pp. 2865-2874, Sep. 2008. [19] K. K. II, N. Kidera, S. Pinel, J. papapolymerou, J. Laskar, J. G. Yook, and M. M. Tentzeris, “Linear tapered cavity-backed slot antenna for millimeter-wave LTCC modules,” IEEE Antennas Wireless Propag. Lett., vol.5, no. 1, pp.175-178, Dec.2006. [20] M. Sun, Y. P. Zhang, K. M. Chua, L. L. Wai, D. Liu, and B. P. Gaucher, “Integration of Yagi antenna in LTCC package for differential 60-GHz radio,”IEEE Trans. Antennas Propag., vol. 56, no. 8, pp.2780-2783, Aug. 2008. [21] N. Kaneda, W. R. Deal, Q. Yongxi, R. Waterhouse, and T. Itoh, “A broadband planar quasi-Yagi antenna,”IEEE Trans. Antennas Propag., vol. 50, no. 8, pp.1158-1160, Aug. 2002. [22] P. R. Grajek, B. Schoenlinner, and G. M. Rebeiz, “A 24-GHz high-gain Yagi-Uda antenna array,” IEEE Trans. Antennas Propag., vol. 52, no. 5, pp.1257-1261, May 2014. [23] R. A. Alhalabi, and G. M. Rebeiz, “Differentially-fed millimeter-mave Yagi-Uda antennas with folded dipole feed,”IEEE Trans. Antennas Propag., vol. 58, no. 3, pp.966-969, Mar. 2010. [24] R. A. Alhalabi, Y. C. Chiou, and G. M. Rebeiz, “Self-shielded high-efficiency Yagi-Uda antennas for 60 GHz communications,”IEEE Trans. Antennas Propag., vol. 59, no. 3, pp.742-750, Mar. 2011. [25] G. R. Dejean, and M. M. Tentzeris, “A new high gain microstrip Yagi array antenna with a high front to back ratio for WLAN and millimeter-wave applications,”IEEE Trans. Antennas Propag., vol. 55, no. 2, pp.298-304, Feb. 2007. [26] R. A. Alhalabi, and G. M. Rebeiz, “High-gain Yagi-Uda antennas for millimeter-wave switched-beam systems,”IEEE Trans. Antennas Propag., vol. 57, no. 11, pp.3672-3676, Nov. 2009. [27] C. H. Chen, “Design of planar end-fire antennas,” M.S. thesis, Dept. Comm. Eng. NTU Univ., Taipei, Taiwan, Jun.2011. [28] C. B. Dietrich, K. Dietze, J. R . Nealy, and W .L. Stutzman,”Spatial, polarization, and pattern diversity for wireless handheld terminals,” IEEE Trans. Antennas Propag., vol. 49, no. 9, pp.1271-1281, Sep. 2001. [29] H. Wong, K. L. Lau, and K. M. Luk, “Design of dual-polarized L-probe patch antenna arrays with high isolation,” IEEE Trans. Antennas Propag., vol. 52, no. 1, pp.45-52, Jan. 2004. [30] T. W. Chiou, and K. L. Wong, “Broad-band dual-polarized single microstrip patch antenna with high isolation and low cross polarization,”IEEE Trans. Antennas Propag., vol. 50, no. 3, pp.399-401, Mar. 2002. [31] M. Barba, “A high-isolation, wideband and dual-linear polarization patch antenna,”IEEE Trans. Antennas Propag., vol. 56, no. 5, pp.1472-1476, May 2008. [32] S. Gao, L. W. Li, M. S. Leong, and T. S. Yeo, “A broad-band dual-polarized microstrip patch antenna with aperture coupling,” IEEE Trans. Antennas Propag., vol. 51, no. 4, pp.890-900, Apr. 2003. [33] K. L. Wong, and T. W. Chiou, “Broadband dual-polarized patch antennas fed by capacitively coupled feed and slot-coupled feed,” IEEE Trans. Antennas Propag., vol. 50, no. 3, pp.346-351, Mar. 2002. [34] O. Kramer, T. Derafi, and K. Wu, “Vertically multilayer-stacked Yagi antenna with single and dual polarizations,” IEEE Trans. Antennas Propag., vol. 58, no. 4, pp.1022-1030, Apr. 2010. [35] W. C. Zheng, L. Zhang, Q. X. Li, and Y, Leng, “Dual-band dual-polarized compact bowtie antenna array for anti-interference MIMO WLAN,”IEEE Trans. Antennas Propag., vol. 62, no. 1, pp.237-246, Jan. 2014. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/53061 | - |
dc.description.abstract | 本論文提出了一個在側邊有最大輻射的印刷雙極化毫米波應用天線。論文的一開始,我們比較及討論了晶片嵌入式天線和封裝之天線在毫米波射頻電路與天線的整合。因為考量天線輻射效率,我們採用了封裝之天線整合技術。關於封裝之天線整合技術的板材選取,我們研究了兩種製成方法:低溫共燒陶瓷與印刷電路板。論文提出了設計在低溫共燒陶瓷與印刷電路板的垂直及水平極化準八木偶極天線。準八木偶極天線有著寬頻、單一方向輻射、高增益、高效率的特色。我們更進一步整合兩個不同極化的天線在印刷電路板上,使得尺寸縮小。再根據天線可能在行動終端上的配置,提出了角落及側邊的設計。側邊的設計更延伸成相控陣列的形態。所設計之天線適合在毫米波和多輸入多輸出系統的應用。 | zh_TW |
dc.description.abstract | This thesis presents a printed dual-polarized antenna with a maximum radiation in the end-fire direction for millimeter-wave (mmW) applications. In the beginning, Antenna-on-Chip (AoC) and Antenna-in-Package (AiP) which integrate RF circuits with antennas in mmW band are compared and discussed, where AiP is adopted because of the antenna efficiency. Regarding the selection of AiP platform substrate, we investigate two kinds of manufacturing process: Low Temperature Co-fired Ceramic (LTCC) and Printed Circuited Board (PCB). This thesis proposes vertically and horizontally polarized quasi Yagi-Uda antennas particularly designed on LTCC and PCB. Quasi Yagi-Uda antenna has several features including broadband, unidirectional pattern, high gain, and high efficiency. For PCB process, we further integrate the antennas of two different polarizations into the same area, leading to a size reduction. Both corner and lateral designs are investigated according to potential positions of antennas in mobile terminal. The lateral design is further extended to array level for phased array operation. The proposed antennas are suitable for mmW mobile communications and MIMO system applications. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T16:42:00Z (GMT). No. of bitstreams: 1 ntu-104-R02942010-1.pdf: 8028743 bytes, checksum: aaed1874121e13d9e9256aca76237c0c (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | 口試委員會審定書……………………………………………………………………..# 誌謝 ii 中文摘要 iii ABSTRACT iv CONTENTS v LIST OF FIGURES viii LIST OF TABLES xv Chapter 1 Introduction 1 1.1 Research Motivation 1 1.2 Organization of the Thesis 2 Chapter 2 Manufacturing Issues of Millimeter wave Antennas 4 2.1 Introduction and Literature Survey 4 2.2 Low Temperature Co-fired Ceramic 5 2.3 Printed Circuit Board 6 2.4 Summary 9 Chapter 3 Millimeter Wave Antenna Design on LTCC 10 3.1 Introduction and Literature Survey 10 3.2 Antenna Configuration and Design 11 3.2.1 Design of horizontal-polarized quasi Yagi-Uda anten 11 3.2.2 Design vertical-polarized quasi Yagi-Uda antenna 14 3.3 Simulated and Measurement Results 17 3.3.1 Results of horizontal-polarized quasi Yagi-Uda antenna 17 3.3.2 Results of vertical-polarized quasi Yagi-Uda antenna 24 3.4 Summary 31 Chapter 4 Millimeter Wave Antenna Design on PCB 33 4.1 Introduction and Literature Survey 33 4.2 Antenna Configuration and Design 34 4.2.1 Design of horizontal-polarized quasi Yagi-Uda antenna single element 34 4.2.2 Design vertical-polarized quasi Yagi-Uda antenna single element 37 4.3 Simulated Results 40 4.3.1 Results of horizontal-polarized quasi Yagi-Uda antenna single element 40 4.3.2 Results of vertical-polarized quasi Yagi-Uda antenna single element 46 4.4 Summary 52 Chapter 5 Integrated Design of Dual-Polarized Millimeter Wave Antennas on PCB 54 5.1 Introduction and Literature Survey 54 5.2 Antenna Configuration and Design 56 5.2.1 Design of dual-pol quasi Yagi-Uda antenna for corner design of mobile phone 56 5.2.2 Design of dual-pol quasi Yagi-Uda antenna for lateral design of mobile phone 58 5.3 Simulated and Measurement Results 63 5.3.1 Results of dual-pol quasi Yagi-Uda antenna for corner design of mobile phone 63 5.3.2 Results of dual-pol quasi Yagi-Uda antenna for lateral design of mobile phone 91 5.4 Summary 135 Chapter 6 Conclusion 137 REFERENCES 139 | |
dc.language.iso | en | |
dc.title | 側向輻射雙極化毫米波天線之研製 | zh_TW |
dc.title | Design and Implement of Dual-Polarized Millimeter Wave Antennas for End-Fire Radiation | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 林俊華,陳富強,鄭瑞清 | |
dc.subject.keyword | 毫米波,低溫共燒陶瓷,印刷電路板,準八木偶極天線,側邊輻射,極化分集,相控陣列,多輸入多輸出, | zh_TW |
dc.subject.keyword | millimeter wave,LTCC,printed circuit board,quasi Yagi-Uda,end-fire radiation,polarization diversity,phased array,MIMO., | en |
dc.relation.page | 144 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2015-08-11 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 7.84 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。