請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52988
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 張陸滿 | |
dc.contributor.author | Chen-Kuo Yeh | en |
dc.contributor.author | 葉振國 | zh_TW |
dc.date.accessioned | 2021-06-15T16:37:50Z | - |
dc.date.available | 2025-08-12 | |
dc.date.copyright | 2015-08-16 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-08-12 | |
dc.identifier.citation | 1)王文洋,化工廠建廠工程-電腦輔助設計實務與經濟,歐亞書局,臺北,第233-276頁﹙1992﹚。
2)林榮發,「工程設計研發人員應用資訊科技之研究」第32-40頁及第73-96頁,碩士論文,國立中山大學資訊管理研究所,高雄西子灣﹙2003﹚。 3)陳柏昕,「我國機械配管業內隱型知識傳承之研究」第38-79頁,碩士論文,國立雲林科技大學企業管理研究所,雲林斗六﹙2007﹚。 4)張晉瑋,「影響管線工程設計品質因素之研究」第24-55頁,碩士論文,國立虎尾科技大學工業工程與管理研究所,雲林虎尾﹙2011﹚。 5)廖岳蜂,「管線工程3D設計軟體之評選」第17-45頁,碩士論文,國立虎尾科技大學工業工程與管理研究所,雲林虎尾﹙2012﹚。 6)郭斯傑,「機電設備之變更設計對建築工程總完工期程之分析與影響」,行政院國家科學委員會專題研究計畫,臺北﹙2003﹚。 7)李興生,「管路設計與3D繪圖整合系統之發展」,技術學刊,第十五卷,第三期,第455-462頁(2000年9月)。 8)謝文欽,管路製圖(最新CNS管路符號表示法謝文欽編著) 第323-333頁,臺北市,正文,(1993)。 9)徐文雄,工業配管原理與實務,第128-200頁,初版,全華科技圖書公司,台北(1997)。 10)洪根旺,製程管路設計。台北:徐氏基金會,(1978)。 11)洪純仁,配管(化工程序機器構造設計叢書之3)日本化學工學協會編。台北:正言,(1984)。 12)吳明隆,SPSS操作與應用─問卷統計分析實務,五南圖書出版社,台北,(2009)。 13)陳振欽、林聖岱,「建廠生命週期之工程資訊整合」,化工技術,第十五卷,第八期,第168-180頁(2007年8月)。 14)楊慧萱、方嘉琪、林祐正,「營造廠BIM建模協同作業管理模式建置之探討」,土木水利,第41卷,第3期,第26-29頁(2014年6月)。 15)蘇郁智、陳彥貝、林祐正,「整合BIM技術於設施資訊管理平台建置及應用」,土木水利,第41卷,第3期,第30-34頁(2014年6月)。 16)Namhun Lee A. M., Carrie S Dossick, M., and Sean P. Foley,「Guideline for Building Information Modeling in Construction Engineering and Management Education」,Journal of Professional Issues in Engineering Education and Practice,第139卷,第4期,p266-p274,2013年。 17)Ed Bausbacber, Roger Hunt,「Process Plant Layout and Piping Design」,p415-p429,1993 by PTR Prentice-Hall, Inc. A Simon & Schuster Company Englewood Cliffs, New Jersey 07632。 18)ITT Grinnell Corporation,1976,'PIPING DESIGN AND ENGINEERING', p157-p213,ITT Grinnell Industrial Piping, Inc. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52988 | - |
dc.description.abstract | 生產廠房工程案件的執行需投入大量的資源與成本,從可行性評估、初步規劃、基本設計、細部設計、採購發包、建造施工、運轉測試到最終的完工驗收,整個專案實際執行的時間往往長達數年,甚至十多年。但許多專案於建造施工時期所產生的問題,例如界面衝突、設計變更、可建造性等等,往往歸咎於設計規劃不良而導致延誤工期、追加預算。所以,是否能掌控每一個階段的設計品質直接會影響到整個專案的成敗。基於此現象,本論文將探討國內生產設施廠房專案當中,界面整合最多且複雜度最高的管線設計部分來進行分析與探討影響管線工程設計品質之因素。希望藉由本研究的結果能夠作為公司內部管線工程設計工具選擇時的參考,以期能達到提升管線工程設計品質的目標。
本研究是針對細部設計階段,佔建廠最重要比例的管線工程設計來著手,因其居於核心整合地位,所以正確的管線設計能夠保障整個生產廠房的設計品質並降低建造成本。因此本研究經由整理配管工作設計內容及製作的圖說文件等,提出了36個因素事項供選擇繪圖軟體時考慮及注意;同時藉專家問卷方式收集意見資料,再經可靠度分析、敘述性統計分析、單因子變異數分析及成對樣本檢定等方法,整理出受訪者在意及重視之因素事項,其中有12項為受訪者認為需先考慮的項目: (1)「與其他設計部門間的整合能力」 (2)「變更設計時修改的方便性,彈性的管線修改」 (3)「建模過程中,自行偵查錯誤的能力」 (4)「3D材料的正確性」 (5)「產生立體配管圖的正確性」 (6)「根據管線材料等級(SPEC.)來繪製3D管線」 (7)「建立管線模型所花費之時間–要短」 (8)「建立管支撐架模型所花費之時間–要短」 (9)「執行管線碰撞檢查」 (10)「各版本間互用資料」 (11)「各版本間相容問題」 (12)「內建豐富管線Catalogs(ANSI-ASME、JIS、DIN、AWWA…)」 期望所訂定的條件事項能協助找出符合經濟效益、人力需求上最理想化的設計工具,使得建廠規劃設計階段的專案執行更為順利,並兼顧最佳設計品質和降低成本。 | zh_TW |
dc.description.abstract | Many constructed projects have problems of interface conflict, design changes, constructability and so forth. They are caused by poor planning and resulted in schedule delay and supplementary budget. Since design quality control will heavily affect the success of the project. This study will explore piping design, which needs the most interface integration and is the most complex among projects of domestic production facilities plants.
This research focused on the detail design stage, and analysis of the factors affecting quality of piping design. This research put forward 36 factors to be considered in piping design and suggestions for selecting graphic software through sorting contents of the pipe design work and engineering design drawings. Meanwhile, sorting out the factors was through expert questionnaire survey. The collected survey data were tested by descriptive statistical, analysis reliability analysis, one-way analysis of variance and paired sample test methods. And the follower 12 items were significantly identified and recommended for consideration in the selection graphic software as followed: (1)「ability to interface integration with other engineering function.」 (2)「convenience for modify the design, flexible piping design modifications.」 (3)「detected mistake on modeling automatically.」 (4)「correct in piping material take-off.」 (5)「correct in to generate piping isometric drawing. (6)「To build 3D piping model according to piping material specification.」 (7)「The period of build 3D piping model - to be short.」 (8)「The period of build 3D pipe support model - to be short.」 (9)「To execute interference check」 (10)「the interoperability of data base between the different software」 (11)「the compatibility between the different software」 (12)「set up a fertile piping Catalogs (ANSI-ASME, JIS, DIN, AWWA ...)」 The above 12 items would facilitate the selection of an economical design tool with better manpower arrangement, as well as with better design quality. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T16:37:50Z (GMT). No. of bitstreams: 1 ntu-104-P01521713-1.pdf: 3745818 bytes, checksum: c7bdc9b9c2349a9608559e26251ec9b6 (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | 口試委員會審定書 ……1
誌 謝 2 中文摘要 3 Abstract 4 目 錄 5 圖目錄 7 表目錄 8 第一章 緒論 1 1.1 研究背景 1 1.2 研究目的 4 1.3 研究方法與步驟 4 2.1 概論 5 2.1.1 廠區佈置 (Plant Layout) 5 2.1.2 管線佈置 (Piping Layout) 5 2.2 管線圖二度空間之應用 9 2.2.1 二度空間電腦繪圖的好處 9 2.2.2 二度空間電腦繪圖在管線工程上的應用 9 2.3 管線圖三度空間之應用 11 2.3.1 為什麼配管工作要使用3D系統 11 2.4 管線應力分析 15 2.4.1管線應力分析之必要性 15 2.4.2影響管線應力的重要因素 15 2.4.3管線應力的決定 15 2.5 依據的法規與標準 16 2.6 管線工程設計之組織架構 16 第三章 個案公司資訊化現況整理 19 3.1 概述 19 3.2 人員及系統能力 19 3.3 硬體設備 19 3.3.1 現有電腦設備 19 3.4 主要軟體程式 21 3.5 電腦輔助設計與繪圖 24 3.6 繪圖軟體之系統要求 24 3.6.1 AutoCAD Plant 3D 系統要求 24 3.6.2 OpenPlant Modeler 系統要求 25 3.6.3 PDMS 系統要求 26 3.6.4 SmartPlant (PDS) 系統要求 27 第四章 研究方法 29 4.1 探討比較之架構建立 29 4.1.1 在資料匯入�匯出之界面因素方面 29 4.1.2 在操作之界面因素方面 29 4.1.3 在軟體本身之因素方面 29 4.2 問卷設計 30 4.3 問卷調查對象 31 4.4 整理方法 31 4.4.1 可靠度分析(Reliability analysis) 31 4.4.2 敘述性統計分析(Descriptive statistics analysis) 31 4.4.3 單因子變異數分析(One factor analysis of variance) 32 第五章 結果分析與討論 33 5.1 可靠度分析 33 5.1.1 整體可靠度分析 33 5.1.2 個別可靠度分析 33 5.2 敘述性統計分析 34 5.2.1 問卷基本資料分析 34 5.2.2 整體量表平均數分析 36 5.2.3 個別量表平均數分析 37 5.2.4 單因子變異數分析 50 5.3 小結 58 第六章 結論與建議 60 6.1 研究發現 60 6.2 建議與討論 62 6.3 後續研究方向 62 參考文獻 64 附錄(一): 65 附錄(二): 70 附錄(三) 74 | |
dc.language.iso | zh-TW | |
dc.title | 繪圖軟體於工程設計使用之探討-以配管工作為例 | zh_TW |
dc.title | Study on Drafting Software for engineering design - A case Study of Process Piping Design Work | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 荷世平,曾惠斌,廖慶隆 | |
dc.subject.keyword | 細部設計,管線工程,設計變更,介面整合,管線設計,繪圖軟體, | zh_TW |
dc.subject.keyword | Detail Design,Piping Engineering,Design Change,Piping Design, | en |
dc.relation.page | 74 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2015-08-12 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 3.66 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。