請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52569
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 吳瑞北 | |
dc.contributor.author | Chang-Yu Lin | en |
dc.contributor.author | 林承宥 | zh_TW |
dc.date.accessioned | 2021-06-15T16:18:54Z | - |
dc.date.available | 2015-08-20 | |
dc.date.copyright | 2015-08-20 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-08-17 | |
dc.identifier.citation | [1] W. L. Langston, J. T. Williams, D. R. Jackson, and F. Mesa, “Spurious radiation from a practical source on a covered microstrip line,” IEEE Trans. Microw. Theory Tech. vol. MTT-49, no. 12, pp. 2216- 2226, Dec.2001.
[2] D. A. Hill, D. G. Camell, K. H. Cavcey, and G. H. Korpke, “Radiated emissions and immunity of microstrip transmission lines: theory and reverberation chamber measurements,” IEEE Trans. On Electromagn. Compat., Vol. 38, No. 2, pp. 165-172, May 1996. [3] K. Naishadham, T. W. Nuteson, and H. W. Yao, “Efficient prediction of radiation from printed transmission-line discontinuities,” IEEE Trans. On Electromagn. Compat., VOL.35, NO. 2, pp. 159-169, May 1993. [4] C. Christopoulos and J. L. Herring, “The application of transmission-line modeling (TLM) to electromagnetic compatibility problems” IEEE Trans. On Electromagn. Compat., Vol.35, No. 2, pp. 185-191, May 1993. [5] M. I. Aksun and R. Mittra, “Estimation of spurious radiation from etches using closed-form green’s functions,” IEEE Trans. Microw. Theory Tech. vol. MTT-40, no. 11, pp. 2063-2069, Nov. 1992. [6] B.-C. Tseng, L.-C. Liao, L.-K. Wu, and H.-T. Lung, “Analytical solutions for the radiated emission of parallel microstrip traces ,” IEEE Trans. Electromagn. Compat., vol. 53, no. 3, pp. 842–845, Aug. 2011 [7] H.-C. Hsieh, C.-N. Chiu, C.-H. Wang, and C.-H. Chen, “A new approach for fast analysis of spurious emissions from RF/microwave circuits,” IEEE Trans. Electromagn. Compat., vol. 51, no. 3, pp. 631–638, Aug. 2009. [8] H. C. Hsieh, C.-N. Chiu, M.-S. Lin, C.-H. Wang, and C. H. Chen, “Anequation-based hybrid method for predicting radiated susceptibility re-sponses of RF/microwave circuits,” IEEE Trans. Electromagn. Compat.,vol. 32, no. 2, pp. 98–105, May 2011. [9] D. M. Pozar, Microwave engineering, 4th ed., New York Wiley, 2011, ch.4. [10] T. L. Wu, Y. H. Lin, J. N. Huang, and J. J. Lin, “The effect of test system impedance on measurements of ground bounce in printed circuit boards,” IEEE Trans. Electromagn. Compat., vol. 43, pp. 600–607, Nov. 2001. [11] S. H. Hall, G. W. Hall, and J. A. McCall, High-Speed Digital System Design, John Wiley & Sons, Inc., 2000, Chapter 4 [12] I. Ndip, F. Ohnimus, S. Guttowski, and H. Reichl, “Minimizing electromagnetic interference in power-ground cavities,” in Electr. Design. Adv. Packag. Syst. Symp.(EDAPS), Seoul, Korea, pp. 128-131, Dec. 2008. [13] J. Choi, S. Chun, N. Na, M. Swaminathan, and L. Smith, “A methodology for the placement and optimization of decoupling capacitors for gigahertz system,” in 13th Int Conf. VLSI Design, Science City, Calcutta, India, pp. 156-161, Jan. 2000. [14] I. Ndip, F. Ohnimus, S. Guttowski, and H. Reichl, “Minimizing electromagnetic interference in power-ground cavities,” in Electr. Design. Adv. Packag. Syst. Symp.(EDAPS), Seoul, Korea, pp. 128-131, Dec. 2008. [15] J. Choi, S. Chun, N. Na, M. Swaminathan, and L. Smith, “A methodology for the placement and optimization of decoupling capacitors for gigahertz system,” in 13th Int Conf. VLSI Design, Science City, Calcutta, India, pp. 156-161, Jan. 2000. [16] K.-B. Wu, A.-S. Liu, G.-H. Shiue, C.-M. Lin, and R.-B. Wu, “Optimum for the locations of decoupling capacitors in suppressing the ground bounce by Genetic Algorithm,” in Prog. in Electromagn. Res. Symp.(PIERS), Hangzhou, Zhejiang, China, pp. 411-415, Aug. 22-26, 2005. [17] 李冠緯,利用去耦合電容易製電源接地平面板邊輻射雜訊之分析與設計,國立台灣大學碩士論文,2011年6月. [18] T.L. Wu, Y.H. Lin, T.K. Wang, C.C. Wang, and S.T. Chen, “Electromagnetic bandgap power/ground planes for wideband suppression of ground bounce noise and radiated emission in high-speed circuits,” IEEE Trans. on Microwave Theory and Tech., vol. 53, no. 9, pp. 2935–2942, Sep. 2005. [19] S. D. Rogers, “Electromagnetic-bandgap layers for broad-band suppression of TEM modes in power planes,” IEEE Trans.Microw. Theory Tech., vol. 53, no. 8, pp. 2495–2505, Aug. 2005. [20] F. Haga, K. Nakano, and O. Hashimoto, “Reduction in radiated emission by symmetrical power-ground stack-up PCB with no open edge,” in Proc. IEEE Int. Symp. Electromag. Compat., Minneapolis, MN, pp. 262-267, Aug. 2002. [21] K.-B. Wu, R.-B. Wu, and D. De Zutter, “Modeling and optimal design of shorting vias to suppress radiated emission in high-speed alternating PCB planes,” IEEE Trans. Comp., Packag., Manufac. Technol., vol.1, no.4, pp. 566-573, Apr. 2011. [22] 張復勝,多層板電源接地平面電磁干擾分析與利用接地連通柱抑制輻射雜訊之設計,國立台灣大學碩士論文,2009年6月. [23] C. A. Balanis, Antenna Theory–Analysis and Design, 2nd ed., Chapter 14, John Weley & Sons, Inc., 1997. [24] R. E. Collins, Field Theory of Guided Waves, 2nd ed., IEEE Press, 1991, Chapter 2. [25] R. K. Hoffmann, Handbook of Microwave Integrated Circuits. Artech House, 1987 [26] R. F. Harrington, Time-Harmonic Electromagnetic Fields, A Classic Reissue, Chapter 5, John Wiley & Sons, Inc., 2001. [27] 謝翰璋,射頻微波電路電磁輻射干擾與耐受性知新式分析方法,國立台灣大學博士論文,2011年6月, p.35~p.36. [28] A. Das, S.K. Das, Microwave Engineering. McGraw Hill Inc., 2001, p.239~p.242 [29] 丁惠玲,Giga赫茲橫向電磁波傳輸室應用在電磁干擾量測之研究,國立台灣大學碩士論文,2008年6月. [30] D. M. Pozar, Microwave engineering, 4th ed., New York Wiley, 2011, ch.2. [31] Agilent 8360B Series Synthesized Swept Signal Generators Datasheet. [Online]:http://www.atecorp.com/ATECorp/media/pdfs/data-sheets/Agilent-8360B-L-Series_Datasheet.pdf | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52569 | - |
dc.description.abstract | 本論文主要內容是針對多層結構的印刷電路板所造成的電磁干擾問題做分析與探討。主要可以分成兩個部分。
第一個部分為板邊輻射的部分,由於許多訊號層所產生的接地彈跳雜訊,使得電磁波在板內來回傳播反射,並在邊緣產生等效的磁流,進而產生遠場輻射。本論文除了利用空腔振盪器模型結合市售模擬軟體SIwave來預測板邊輻射外,也提出了利用接地連通柱在板邊加一圈的方法來抑制板邊輻射並給予最佳化設計。 第二個部份是表面輻射,首先利用電磁理論的方法推導出單一微帶線之遠場輻射方程式,並利用SIwave取得端電壓和端座標,即可得到最後整個空間的電磁輻射效應。再結合天線陣列因子的概念可以得到一般印刷電路板走線的遠場總輻射估計,另外此方法的時間也較市售模擬軟體SIwave與HFSS來得快速。此外,也適用於一般常見的差模訊號線與共模訊號線。 最後,整合表面輻射和板邊輻射,並利用全波模擬軟體和GHz橫向電磁波傳輸室量測來驗證其分析之準確性及接地連通柱設計。 | zh_TW |
dc.description.abstract | This thesis focuses on the problems of Electromagnetic Interference(EMI)of multilayer Printed Circuit Board ( PCB ), and it can be separated into two parts.
First part is edge radiation which is mostly contributed to the ground bounce noise of PCB arising from current flowing through vias or the signal trace crossing slot lines. The electromagnetic waves reflecting back and forth from edges of the substrate generate a standing wave, which creates effective magnetic currents causing serious EMI issues. Here, the cavity resonator model is used to predict the edge radiation. This thesis also proposed using stitching vias around the PCB to suppress the edge radiation, thereby leading to the optimal design of shorting vias is given. Second part is surface radiation. Based on electromagnetic theory, a closed-form formula for far field radiation by a straight microstrip transmission line section is derived. The far field information can be obtained by combining SIwave, which gives the node voltage and location information of routing. The total radiation prediction of general PCB routing can also be obtained by applying the concept of array factor in antenna theory. The simulation time of this method is faster than HFSS and SIwave and furthermore, this method can be applied in common differential and common-mode signals. Finally, this thesis integrates the surface and edge radiation. Full-wave simulation and GTEM Cell measurement are used to validate the accuracy of the proposed analysis and shorting via design. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T16:18:54Z (GMT). No. of bitstreams: 1 ntu-104-R02942085-1.pdf: 4558012 bytes, checksum: c348437691006818105e53e9ba7b8b64 (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | 目 錄
摘 要 ii Abstract iii 目 錄iv 圖 例 vi 表 格 x 第一章 研究動機與簡介 1 1-1 研究動機 1 1-2 文獻回顧與探討 2 1-3 章節概要 3 1-4 貢獻 4 第二章 多層印刷電路板輻射場理論背景 5 2-1 空腔共振模型之遠場輻射分析 5 2-2 格林函數基本闡述 7 2-3 利用短路連通柱抑制板邊輻射之介紹 9 第三章 多層印刷電路板板邊輻射分析與抑制 14 3-1 多層電路板的簡化 14 3-2 三層印刷電路板知共模與差模模態總輻射功率分析 15 3-3 電磁模擬與理論分析驗證 19 3-4 印刷電路板堆疊方式對板邊輻射討論 25 第四章 多層印刷電路板微帶線走線之表面輻射分析 30 4-1 微帶線走線之輻射分析 30 4-2 電磁模擬與理論驗證 35 4-3 一對耦合並排微帶線遠場輻射分析與模擬驗證 38 4-4 實際一對訊號結構之模擬驗證 41 4-5 實際DDR3走線模擬驗證與時間比較 46 第五章 模擬結果與量測比較討論 50 5-1 GTEM實際量測與模擬的修正 50 5-2 表面輻射的模擬與量測 56 5-3 結合表面輻射與板邊輻射的模擬與量測 58 第六章 結論與未來工作 64 6-1 結論 64 6-2 未來工作 65 參考文獻 66 | |
dc.language.iso | zh-TW | |
dc.title | 多層印刷電路板走線之電磁輻射快速預測方法 | zh_TW |
dc.title | Fast EMI Analysis for Multilayer PCB Routing | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳宗霖,王文山,林丁丙,劉家驄 | |
dc.subject.keyword | 電磁干擾,接地彈跳雜訊,空腔共振器模型,接地連通柱, | zh_TW |
dc.subject.keyword | cavity resonator model,electromagnetic interference(EMI),ground bounce,shorting vias, | en |
dc.relation.page | 68 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2015-08-17 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 4.45 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。