請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51711
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 段維新(Wei-Hsing Tuan) | |
dc.contributor.author | Pei-Chia Chen | en |
dc.contributor.author | 陳珮嘉 | zh_TW |
dc.date.accessioned | 2021-06-15T13:45:48Z | - |
dc.date.available | 2016-03-08 | |
dc.date.copyright | 2016-03-08 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-11-30 | |
dc.identifier.citation | [1] J. P. Goff, W. Hayes, S. Hull, M. T. Hutchings and K. N. Clausen, “Defect Structure of Yttria-Stabilized Zirconia and its Influence on the Ionic Conductivity at Elevated Temperatures,” Phys. Rev. B, 59 14202-14219 (1999).
[2] B. Basu, J. Vleugels and O. Van Der Biest, “Transformation Behaviour of Tetragonal Zirconia: Role of Dopant Content and Distribution,” Mat. Sci. Eng., A366 338-347 (2004). [3] R. H. J. Hannink, P. M. Kelly and B. C. Muddle, “Transformation Toughening in Zirconia-Containing Ceramics,” J. Am. Ceram. Soc., 83 461-487 (2000). [4] K. Matsui, H. Horikoshi, N. Ohmichi, M. Ohgai, H. Yoshida and Y. Ikuhara, “Cubic-Formation and Grain-Growth Mechanisms in Tetragonal Zirconia Polycrystal,” J. Am. Ceram. Soc., 86 1401-1408 (2003). [5] J. Chevalier, L. Gremillard, A. V. Virkar and D. R. Clarke, “The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends,” J. Am. Ceram. Soc., 92 1901-1920 (2009). [6] L. S. M. Traqueia, T. Pagnie and F. M. B. Marques, “Structural and Electrical Characterization of Titania-Doped YSZ,” J. Eur. Ceram. Soc., 17 1019-1026 (1997). [7] J. M. Leger, P. E. Tomaszewski, A. Atouf and A. S. Pereira, “Pressure-Induced Structural Phase Transitions in Zirconia under High Pressure,” Phys. Rev. B, 47 14075-14083 (1993). [8] H. Hasegawa, “Rhombohedral Phase Produced in Abraded Surfaces of Partially Stabilized Zirconia (PSZ),” J. Mater. Sci. Lett., 2 91-93 (1983). [9] S. Chen, W. Deng and P. Shen, “Stability of Cubic ZrO2 (10mol.% Y2O3) when Alloyed with NiO, Al2O3 or TiO2: Implications to Solid Electrolytes and Cermets,” Mater. Sci. Eng., B22 247-255 (1994). [10] J. R. Kelly and I. Denry, “Stabilized Zirconia as a Structural Ceramic: An Overview,” Dent. Mater., 24 289-298 (2008). [11] M. Ruhle and A. G. Evans, “High Toughness Ceramics and Ceramic Composites,” Prog. Mater. Sci., 33 85-167 (1989). [12] P. F. Becher and M. V. Swain, “Grain-Size-Dependent Transformation Behavior in Polycrystalline Tetragonal Zirconia,” J. Am. Ceram. Soc., 75 493-502 (1992). [13] J. Wang, M. Rainforth and R. Stevens, “The Grain Size Dependence of the Mechanical Properties in TZP Ceramics,” J. Br. Ceram. Trans., 88 1-6 (1988). [14] R. W. Rice, “Strength-Grain Size Behaviour of ZrO2 at Room Temperature,” J. Mater. Sci. Lett., 13 1408-1412 (1994). [15] C. J. Ho, H. C. Liu and W. H. Tuan, “Effect of Abrasive Grinding on the Strength of Y-TZP,” J. Eur. Ceram. Soc., 29 2665-2669 (2009). [16] D. Vladikova, J. A. Kilner, S. J. Skinner, G. Raikova and Z. Stoynov, “Differential Impedance Analysis of Single Crystal and Polycrystalline Yttria Stabilized Zirconia,” Electrochim. Acta, 51 1611-1621 (2006). [17] M. Mori, T. Abe, H. Itoh, O. Yamamoto, Y. Takeda and T. Kawahara, “Cubic-Stabilized Zirconia and Alumina Composites as Electrolytes in Planar Type Solid Oxide Fuel Cells,” Solid State Ionics, 74 157-164 (1994). [18] J. E. Bauerle, “Study of Solid Electrolyte Polarization by a Complex Admittance Method,” J. Phys. Chem. Solids, 30 2657-2670 (1969). [19] S. Hui, J. Roller, S. Yick, X. Zhang, C. Deces-Petit, Y. Xie, R. Maric and D. Ghosh, “A Brief Review of the Ionic Conductivity Enhancement for Selected Oxide Electrolytes,” J. Power Sources, 172 493-502 (2007). [20] M. Hartmanova, J. Schneider, V. Navratil, F. Kundracik, H. Schulz and E. E. Lomonova, “Correlation Between Microscopic and Macroscopic Properties of Yttria Stabilized Zirconia,” Solid State Ionics, 136-137 107-113 (2000). [21] X. Guo, “Physical Origin of the Intrinsic Grain-Boundary Resistivity of Stabilized-Zirconia: Role of the Space-Charge Layers,” Solid State Ionics, 81 235-242 (1995). [22] M. J. Verkerk, A. J. A. Winnubst and A. J. Burggraaf, “Effect of Impurities on Sintering and Conductivity of Yttria-Stabilized Zirconia,” J. Mater. Sci., 17 3113-3122 (1982). [23] S. P. S. Badwal and J. Drennan, “Yttria-Zirconia: Effect of Microstructure on Conductivity,” J. Mater. Sci., 22 3231-3239 (1987). [24] D. Z. de Florio and R. Muccillo, “Sintering of Zirconia-Yttria Ceramics Studied by Impedance Spectroscopy,” Solid State Ionics, 123 301-305 (1999). [25] A. P. Santos, R. Z. Domingues and M. Kleitz, “Grain Boundary Blocking Effect in Tetragonal Yttria Stabilized Zirconia,” J. Eur. Ceram. Soc., 18 1571-1578 (1998). [26] A. J. Feighery and J. T. S. Irvine, “Effect of Alumina Additions upon Electrical Properties of 8mol.% Yttria-Stabilised Zirconia,” Solid State Ionics, 121 209-216 (1999). [27] T. S. Zhang, Z. H. Du, S. Li, L. B. Kong, X. C. Song, J. Lu and J. Ma, “Transitional Metal-Doped 8mol% Yttria-Stabilized Zirconia Electrolytes,” Solid State Ionics, 180 1311-1317 (2009). [28] Z. Ding, R. Oberacker and F. Thummler, “Microstructure and Mechanical Properties of Yttria-Stabilised Tetragonal Zirconia Polycrystals (Y-TZP) Containing Dispersed Silicon Carbide Particles,” J. Eur. Ceram. Soc., 12 377-383 (1993). [29] B. Basu, J. Vleugels and O. Van Der Biest, “Development of ZrO2-TiB2 Composites: Role of Residual Stress and Starting Powders,” J. Alloy. Compd., 365 266-270 (2004). [30] Z. Pędzich, K. Haberko, J. Piekarczyk, M. Faryna and L. Lityńska, “Zirconia Matrix-Tungsten Carbide Particulate Composites Manufactured by Hot-Pressing Technique,” Mater. Lett., 36 70-75 (1998). [31] S. Tekeli, M. Erdogan and B. Aktas, “Influence of α-Al2O3 Addition on Sintering and Grain Growth Behavior of 8mol% Y2O3-Stabilised Cubic Zirconia (c-ZrO2),” Ceram. Int., 30 2203-2209 (2004). [32] L. Gao, Q. Liu, J. S. Hong, H. Miyamoto, S. D. De La Torre, A. Kakitsuji, K. Liddell and D. P. Thompson, “Phase Transformation in the Al2O3-ZrO2 System,” J. Mater. Sci., 33 1399-1403 (1998). [33] J. Suffner, M. Lattemann, H. Hahn, L. Giebeler, C. Hess, I. G. Cano, S. Dosta, J. M. Guilemany, C. Musa, A. M. Locci, R. Licheri, R. Orru and G. Cao, “Microstructure Evolution During Spark Plasma Sintering of Metastable (ZrO2-3mol% Y2O3)-20wt% Al2O3 Composite Powders,” J. Am. Ceram. Soc., 93 2864-2870 (2010). [34] K. Tsukuma, K. Ueda and M. Shimada, “Strength and Fracture Toughness of Isostatically Hot-Pressed Composites of Al2O3 and Y2O3-Partially-Stabilized ZrO2,” J. Am. Ceram. Soc., 68 C-4-C-5 (1985). [35] G. Pezzotti, V. Sergo, O. Sbaizero, N. Muraki, S. Meriani and T. Nishida, “Strengthening Contribution Arising from Residual Stresses in Al2O3/ZrO2 Composites: a Piezo-Spectroscopy Investigation,” J. Eur. Ceram. Soc., 19 247-253 (1999). [36] B. Basu, J. Vleugels and O. Van Der Biest, “ZrO2-Al2O3 Composites with Tailored Toughness,” J. Alloy. Compd, 372 278-284 (2004). [37] S. Tekeli, “The Flexural Strength, Fracture Toughness, Hardness and Densification Behaviour of Various Amount of Al2O3-Doped 8YSCZ/Al2O3 Composites Used as an Electrolyte for Solid Oxide Fuel Cell,” Mater. Design, 27 230-235 (2006). [38] Q. Yu, C. Zhou, H. Zhang and F. Zhao, “Thermal Stability of Nanostructured 13wt% Al2O3-8wt% Y2O3-ZrO2 Thermal Barrier Coatings,” J. Eur. Ceram. Soc., 30 889-897 (2010). [39] A. H. Heuer, N. Claussen, W. M. Kriven and M. Ruhle, “Stability of Tetragonal ZrO2 Particles in Ceramic Matrices,” J. Am. Ceram. Soc., 65 642-650 (1982). [40] C. Hillman, Z. Suo, and F. F. Lange, “Cracking of Laminates Subjected to Biaxial Tensile Strains,” J. Am. Ceram. Soc., 79 2127-2403 (1996). [41] X. Guo, C. Q. Tang and R. Z. Yuan, “Grain Boundary Ionic Conduction in Zirconia-Based Solid Electrolyte with Alumina Addition,” J. Eur. Ceram. Soc., 15 25-32 (1995). [42] E. P. Butler and J. Drennan, “Microstructural Analysis of Sintered High-Conductivity Zirconia with Al2O3 Additions,” J. Am. Ceram. Soc., 65 474-478 (1982). [43] X. Guo, W. Sigle, J. Fleig and J. Maier, “Role of Space Charge in the Grain Boundary Blocking Effect in Doped Zirconia,” Solid State Ionics, 154-155 555-561 (2002). [44] J. H. Lee, T. Mori, J. G. Li, T. Ikegami, M. Komatsu and H. Haneda, “Improvement of Grain-Boundary Conductivity of 8mol% Yttria-Stabilized Zirconia by Precursor Scavenging of Siliceous Phase,” J. Electrochem. Soc., 147 2822-2829 (2000). [45] J. E. Petitjean, R. M. Kearsey and X. Huang, “On the Thermodynamics and Microstructure of Variably Cooled and Co-Doped Y2O3-ZrO2 for Application to Thermal Barrier Coatings,” Surf. Coat. Tech., 205 1843-1849 (2010). [46] X. Huang, A. Zakurdaev and D. Wang, “Microstructure and Phase Transformation of Zirconia-Based Ternary Oxides for Thermal Barrier Coating Applications,” J. Mater. Sci., 43 2631-2641 (2008). [47] X. J. Huang and W. Weppner, “Characteristics of Transition Metal Oxide Doping of YSZ: Structure and Electrical Properties,” J. Chem. Soc., Faraday Trans., 92 2173-2178 (1996). [48] J. Feng, X. Ren, X. Wang, R. Zhou and W. Pan, “Thermal Conductivity of Ytterbia-Stabilized Zirconia,” Scripta Mater., 66 41-44 (2012). [49] C. W. Cheng and W. H. Tuan, “Effect of NiO Addition on the Sintering Behaviour and Mechanical Properties of YSZ/Al2O3 Composite,” M. S. thesis, National Taiwan University, Taipei, Taiwan, (2012). [50] S. Raghavan, H. Wang, W. D. Porter, R. B. Dinwiddie and M. J. Mayo, “Thermal Properties of Zirconia Co-Doped with Trivalent and Pentavalent Oxides,” Acta. Mater., 49 169-179 (2001). [51] A. Kuzjukevics and S. Linderoth, “Influence of NiO on Phase Stabilization in 6mol% Yttria-Stabilized Zirconia,” Mater. Sci. Eng., A232 163-167 (1997). [52] A. Kuzjukevics and S. Linderoth, “Interaction of NiO with Yttria-Stabilized Zirconia,” Solid State Ionics, 93 255-261 (1997). [53] S. Primdahl, B. F. Sorensen and M. Mogensen, “Effect of Nickel Oxide/Yttria-Stabilized Zirconia Anode Precursor Sintering Temperature on the Properties of Solid Oxide Fuel Cells,” J. Am. Ceram. Soc., 83 489-494 (2000). [54] S. Chen and P. Shen, “Polymorphic Transformation of t’-phase in Yttria Partially Stabilized Zirconia,” Mater. Sci. Eng., A123 145-152 (1990). [55] X. C. Song, J. Lu, T. S. Zhang and J. Ma, “Sintering Behavior and Mechanisms of NiO-Doped 8mol% Yttria Stabilized Zirconia,” J. Eur. Ceram. Soc., 31 2621-2627 (2011). [56] J. F. Bartolome, C. F. Gutierrez-Gonzalez, C. Pecharroman and J. S. Moya, “Synergistic Toughening Mechanism in 3Y-TZP/Nb Composites,” Acta. Mater., 55 5924-5933 (2007). [57] X. Guo, “Effect of Nb2O5 on the Space-Charge Conduction of Y2O3-Stabilized ZrO2,” Solid State Ionics, 99 137-142 (1997). [58] P. M. Delaforce, J. A. Yeomans, N, C. Filkin, G. J. Wright and R. C. Thomson, “Effect of NiO on the Phase Stability and Microstructure of Yttria-Stabilized Zirconia,” J. Am. Ceram. Soc., 90 918-924 (2007). [59] Y. M. Park and G. M. Choi, “Mixed Ionic and Electronic Conduction in YSZ-NiO Composite,” J. Electrochem. Soc., 146 883-889 (1999). [60] H. Kondo, T. Sekino, T. Kusunose, T. Nakayama, Y. Yamamoto, M. Wada, T. Adachi and K. Niihara, “Solid-Solution Effects of a Small Amount of Nickel Oxide Addition on Phase Stability and Mechanical Properties of Yttria-Stabilized Tetragonal Zirconia Polycrystals,” J. Am. Ceram. Soc., 86 523-525 (2002). [61] Z. Wang, Z. Q. Chen, S. J. Wang and X. Guo, “Effect of Defect Associate on the Electrical Properties of Nb-Doped Yttrium-Stabilized Zirconium,” J. Mater. Sci. Lett., 19 1275-1278 (2000). [62] D. Y. Lee, D. J. Kim and D. H. Cho, “Low-Temperature Phase Stability and Mechanical Properties of Y2O3- and Nb2O5-Co-Doped Tetragonal Zirconia Polycrystal Ceramics,” J. Mater. Sci. Lett., 17 185-187 (1998). [63] P. Li, I. W. Chen and J. E. Penner-Hahn, “Effect of Dopants on Zirconia Stabilization-An X-Ray Absorption Study: I, Trivalent Dopants,” J. Am. Ceram. Soc., 77 118-128 (1994). [64] D. Y. Lee, D. J. Kim, J. W. Jang, D. W. Choi and S. J. Lee, “Phase Stability of (Y, NB)-TZP/Al2O3 Composites under Low Temperature Hydrothermal Conditions,” Mater. Lett., 39 221-226 (1999). [65] C. J. Ho and W. H. Tuan, “Toughening and Strengthening Zirconia through the Addition of a Transient Solid Solution Additive,” J. Eur. Ceram. Soc., 32 335-341 (2012). [66] D. J. Kim, H. J. Jung, J. W. Jang and H. L. Lee, “Fracture Toughness, Ionic Conductivity, and Low-temperature Phase Stability of Tetragonal Zirconia Codoped with Yttria and Niobium Oxide,” J. Am. Ceram. Soc., 81 2309-2314 (1998). [67] Y. M. Park and G. M. Choi, “Microstructure and Electrical Properties of YSZ-NiO Composites,” Solid State Ionics, 120 265-274 (1999). [68] T. B. Coplen, “Atomic Weights of the Elements 1999,” J. Phys. Chem., 30 701-712 (2001). [69] D. J. Kim and T. Y. Tien, “Phase Stability and Physical Properties of Cubic and Tetragonal ZrO2 in the System ZrO2-Y2O3-Ta2O5,” J. Am. Ceram. Soc., 74 3061-3065 (1991). [70] R. C. Garvie and P. S. Nicholson, “Phase Analysis in Zirconia Systems,” J. Am. Ceram. Soc., 55 303-305 (1972). [71] R. M. German, “Powder Metallurgy Science,” Metal Powder Industries Federation, Princeton, New Jersey, U. S. A, 2nd Ed., Appendix C (1994). [72] J. C. Wurst and J. A. Nelson, “Lineal Intercept Technique for Measuring Grain Size in Two-Phase Polycrystalline Ceramics,” J. Amer. Ceram. Soc., 55 109-109 (1972). [73] N. H. Kwon, G. H. Kim, H. S. Song and H. L. Lee, “Synthesis and Properties of Cubic Zirconia-Alumina Composite by Mechanical Alloying,” Mater. Sci. Eng., A299 185-194 (2001). [74] X. Guo, “Roles of Alumina in Zirconia for Functional Applications,” J. Am. Ceram. Soc., 86 1867-1873 (2003). [75] A. Rizea, D. Chirlesan, C. Petot and G. Petot-Ervas, “The Influence of Alumina on the Microstructure and Grain Boundary Conductivity of Yttria-Doped Zirconia,” Solid State Ionics, 146 341-353 (2002). [76] M. Mori, M. Yoshikawa, H. Itoh and T. Abe, “Effect of Alumina on Sintering Behavior and Electrical Conductivity of High-Purity Yttria-Stabilized Zirconia,” J. Am. Ceram. Soc., 77 2217-2219 (1994). [77] B. Kumar, C. Chen, C. Varanasi and J. P. Fellner, “Electrical Properties of Heterogeneously Doped Yttria Stabilized Zirconia,” J. Power Sources, 140 12-20 (2005). [78] K. W. Schlichting, N. P. Padture and P. G. Klemens, “Thermal Conductivity of Dense and Porous Yttria-Stabilized Zirconia,” J. Mater. Sci., 36 3003-3010 (2001). [79] M. Ghatee, M. H. Shariat and J. T. S. Irvine, “Investigation of Electrical and Mechanical Properties of 3YSZ/8YSZ Composite Electrolytes,” Solid State Ionics, 180 57-62 (2009). [80] J. L. Shi and T. S. Yen, “Densification and Microstructure Development of Alumina/Y-TZP Composite Powder (Y-TZP-rich) Compacts,” J. Eur. Ceram. Soc., 15 363-369 (1995). [81] A. Nevarez-Rascon, A. Aguilar-Elguezabal, E. Orrantia and M. H. Bocanegra-Bernal, “On the Wide Range of Mechanical Properties of ZTA and ATZ Based Dental Ceramic Composites by Varying the Al2O3 and ZrO2 Content,” Int. J. Refract. Met. H., 27 962-970 (2009). [82] J. K. M. F. Daguano, C. Santos, R. C. Souza, R. M. Balestra, K. Strecker and C. N. Elias, “Properties of ZrO2-Al2O3 Composite as a Function of Isothermal Holding Time,” Int. J. Refract. Met. H., 25 374-379 (2007). [83] A. Nevarez-Rascon, A. Aguilar-Elguezabal, E. Orrantia and M. H. Bocanegra-Bernal, “Compressive Strength, Hardness and Fracture Toughness of Al2O3 Whiskers Reinforced ZTA and ATZ Nanocomposites: Weibull Analysis,” Int. J. Refract. Met. H., 29 333-340 (2011). [84] S. K. Lee, W. H. Tuan, Y. Y. Wu and S. J. Shih, “Microstructure-Thermal Properties of Cu/Al2O3 Bilayer Prepared by Direct Bonding,” J. Eur. Ceram. Soc., 33 277-285 (2013). [85] N. P. Bansal and D. Zhu, “Thermal Conductivity of Zirconia-Alumina Composites,” Ceram. Int., 31 911-916 (2005). [86] D. de Faoite, D. J. Browne, F. R. Chang-Diaz and K. T. Stanton, “A Review of the Processing, Composition, and Temperature-Dependent Mechanical and Thermal Properties of Dielectric Technical Ceramics,” J. Mater. Sci., 47 4211-4235 (2012). [87] D. S. McLachlan, M. Blaszkiewicz and R. E. Newnham, “Electrical Resistivity of Composites,” J. Am. Ceram. Soc., 73 2187-2203 (1990). [88] S. Chen, P. Shen and D. Gan, “Growth Kinetics of Sintered NiO/ZrO2 (5mol.% Y2O3) composites,” Mater. Sci. Eng., A158 251-258 (1992). [89] P. L. Chen and I. W. Chen, “Grain Growth in CeO2: Dopant Effect, Defect Mechanism, and Solute Drag,” J. Am. Ceram. Soc., 79 1793-1800 (1996). [90] T. W. Lian and W. H. Tuan, “Effect of a small Amount of Nb2O5 Addition on the Phase Stability and Mechanical Properties of Yttria-stabilized Zirconia Composite,” M. S. thesis, National Taiwan University, Taipei, Taiwan, (2013). [91] Y. F. Hsu, S. F. Wang, Y. R. Wang and S. C. Chen, “Effect of Niobium Doping on the Densification and Grain Growth in Alumina,” Ceram. Int., 34 1183-1187 (2008). [92] G. Magnani and A. Brillante, “Effect of the Composition and Sintering Process on Mechanical Properties and Residual Stresses in Zirconia-Alumina Composites,” J. Eur. Ceram. Soc., 25 3383-3392 (2005). [93] B. R. Lawn, “Fracture of Brittle Solids,” Cambridge University Press, (1993). [94] M. Barsoum and M. W. Barsoum, “Fundamental of Ceramics,” Taylor & Francis Group, New York, 458-460 (2003). [95] X. Huang, D. Wang, M. Lamontagne and C. Moreau, “Experimental Study of the Thermal Conductivity of Metal Oxides Co-Doped Yttria Stabilized Zirconia,” Mat. Sci. Eng., B 149 63-72 (2008). [96] E. Barsoukov and J. R. Macdonald, “Impedance Spectroscopy Theory, Experiment, and Applications,” John Wiley & Sons, 2nd Ed., (2005). [97] T. S. Zhang, S. H. Chan, L. B. Kong, P. T. Sheng and J. Ma, “Synergetic Effect of NiO and SiO2 on the Sintering and Properties of 8mol% Yttria-Stabilized Zirconia Electrolytes,” Electrochim. Acta, 54 927-934 (2009). [98] F. W. Vahldiek, “Translucent ZrO2 Prepared at High Pressures,” Journal of the Less-Common Metals, 13 530-540 (1967). [99] S. Raghavan, H. Wang, R. B. Dinwiddie, W. D. Porter, R. Vasen, D. Stover and M. J. Mayo, “Ta2O5/Nb2O5 and Y2O3 Co-doped Zirconias for Thermal Barrier Coatings,” J. Am. Ceram. Soc., 87 431-437 (2004). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51711 | - |
dc.description.abstract | 添加重量百分比二十氧化鋁於三莫耳釔穩定氧化鋯展現傑出的機械性質。此外,根據電性的補償效應,摻雜異價元素可以改變氧空缺的濃度,進一步地影響氧化鋯在室溫下的相穩定性。目前已有許多針對三莫耳釔穩定氧化鋯的研究,但在三莫耳釔穩定氧化鋯內摻雜超過一種異價元素的研究仍較少。在本研究中,將少量的氧化鎳以及氧化鈮同時添加至氧化鋁強化釔氧化鋯內,這些摻雜元素改變了氧空缺的濃度,進而影響了相組成,這些因摻雜而產生的缺陷也會彼此互相產生影響。在此共摻系統中,我們使用無壓燒結以攝氏一千六百度將試片燒結到完全緻密,除了相分析和機械性質量測之外,同時藉由量測試片的導熱性和導電性估算試片內部缺陷濃度。實驗結果證明四方晶氧化鋯隨著添加的摻雜物增加而變為較不穩定,此現象增加了相變態韌化,因而提高了破斷韌性,當添加百分之一莫耳的氧化鎳及零點五莫耳的氧化鈮時,韌性值增加了一倍之多。透過電化學阻抗法也發現了試片的晶粒內電阻以及晶界電阻隨著摻雜量增加而增加,由於試片內部的氧空缺濃度可能隨著摻雜量增加,因此,此電性改變可歸因於試片內部缺陷締合的形成。 | zh_TW |
dc.description.abstract | The 20% alumina added 3mol% yttria-stabilized zirconia exhibits outstanding mechanical properties. The doping of aliovalent ions into zirconia alters its concentration of oxygen vacancy owing to the compensation effect. The addition also changes the phase stability of zirconia at room temperature. Although many studies had been conducted on 3YSZ, few of them focus on the effect of co-doping. In the present study, both NiO and Nb2O5 were incorporated into alumina-strengthened yttria-stabilized zirconia. These dopants alter the concentration of oxygen vacancies. The phase evolution during sintering is consequently affected. The defects may also interact with each other. The YSZ/Al2O3/NiO/Nb2O5 composites were prepared using the pressureless sintering at 1600°C to achieve full densification. Apart from phase analysis and mechanical properties, thermal conductivity and electrical impedance were measured to evaluate the effects of these dopants. The results demonstrated that the tetragonal phase is less stable with the higher dopant content. The fracture toughness is therefore increased owing to the transformation toughening. The fracture toughness of the co-doped system is almost two times than that of un-doped alumina-strengthened yttria-stabilized zirconia after the addition of 1 mol% NiO and 0.5 mol% Nb2O5. The impedance analysis demonstrates that the co-doping of NiO and Nb2O5 increases the gain boundary resistance and the grain resistance. The concentration of oxygen vacancy is likely increased with the increase of dopant content. Therefore, the change of the resistance may be resulted from the formation of defect associations. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T13:45:48Z (GMT). No. of bitstreams: 1 ntu-104-R02527015-1.pdf: 3870078 bytes, checksum: da332b974cca0a714f54b873e24da718 (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | 誌謝 i
摘要 ii ABSTRACT iii CONTENTS v LIST OF FIGURES x LIST OF TABLES xvi Chapter 1 Introduction 1 Chapter 2 Literature Review 3 2.1 Zirconia 3 2.1.1 Phase, Phase Transformation Toughening 3 2.1.2 Yttria-Stabilized Zirconia (YSZ) 5 2.1.3 Toughening Behavior 7 2.1.4 Strengthening Behavior 9 2.1.5 Electrical Conductivity 12 2.2 YSZ/A20 15 2.2.1 Toughening Behavior 15 2.2.2 Strengthening Behavior 19 2.2.3 Electrical Conductivity 21 2.3 YSZ Co-doped System (Ni, Nb) 23 2.3.1 Solid Solution 23 2.3.2 Phase Stability 25 2.3.3 Mechanical Properties 27 2.3.4 Electrical Conductivity 28 Chapter 3 Experimental Procedures 30 3.1 Preparation of Specimens 30 3.1.1 Materials 30 3.1.2 Powder Mixture 30 3.1.3 Sintering Conditions 32 3.2 Characterization of Sintered Specimens 34 3.2.1 Phase Identification 34 3.2.2 Quantitative Analysis 35 3.2.3 Density Measurement 35 3.2.4 Microstructure Observation 37 3.3 Measurement of Mechanical Properties 38 3.3.1 Young’s Modulus 38 3.3.2 Fracture Toughness and Hardness 38 3.3.3 Flexural Strength 39 3.4 Measurement of Thermal Conductivity 40 3.5 Measurement of Electrical Conductivity 41 Chapter 4 Results 43 4.1 3YSZ/A20 43 4.1.1 Phase Analysis 43 4.1.2 Densification and Microstructure Observation 47 4.1.3 Mechanical Properties 49 4.1.4 Thermal Conductivity 51 4.1.5 Electrical Conductivity 52 4.2 3YSZ/A20/Ni/Nb Co-dope System (ZYANiNb) 55 4.2.1 Appearance 55 4.2.2 Phase Analysis 56 4.2.3 Densification and Microstructure Observation 59 4.2.4 Mechanical Properties 63 4.2.5 Thermal Conductivity 66 4.2.6 Electrical Conductivity 68 Chapter 5 Discussion 71 5.1 Effect of Alumina Addition 71 5.1.1 Phase Stability 71 5.1.2 Densification and Microstructure Evolution 72 5.1.3 Mechanical Properties 73 5.1.3.1 Hardness 73 5.1.3.2 Fracture Toughness 74 5.1.3.3 Flexural Strength 77 5.1.4 Thermal Conductivity 77 5.1.5 Electrical Conductivity 80 5.2 Effect of Co-doping Ni and Nb into 3YSZ/A20 83 5.2.1 Phase Stability 83 5.2.2 Densification and Microstructure Observation 87 5.2.3 Mechanical Properties 89 5.2.3.1 Hardness 89 5.2.3.2 Fracture Toughness 91 5.2.3.3 Flexural Strength 94 5.2.4 Thermal Behavior 98 5.2.5 Electrical Conductivity 102 5.2.5.1 Conductivity of Grain 102 5.2.5.2 Conductivity of Grain Boundary 105 5.3 Comparison between ZYANi, ZYANb and ZYANiNb Systems 108 5.3.1 Phase Analysis 108 5.3.2 Densification and Grain Growth 109 5.3.3 Mechanical Properties 112 5.3.4 Thermal Conductivity 113 5.3.5 Electrical Conductivity 115 5.3.5.1 Conductivity of Grain 115 5.3.5.2 Conductivity of Grain Boundary 118 Chapter 6 Conclusions 122 REFERENCES 124 | |
dc.language.iso | en | |
dc.title | 共摻氧化鎳與氧化鈮對釔穩定氧化鋯/氧化鋁複合材料之相組成及機械性質研究 | zh_TW |
dc.title | Effect of Co-doping NiO and Nb2O5 on Phase Stability and Mechanical Properties of Yttria-Stabilized Zirconia (YSZ)/Alumina Composite | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 周振嘉(Chen-Chia Chou),陳錦毅(Chin-Yi Chen),施劭儒(Shao-Ju Shih) | |
dc.subject.keyword | 釔穩定氧化鋯,氧化鋁強化氧化鋯,共摻系統,相分析,相變態韌化,機械性質,熱傳導,電化學阻抗, | zh_TW |
dc.subject.keyword | Yttria-stabilized zirconia,alumina-toughened zirconia,co-doping,phase analysis,transformation toughening,mechanical properties,thermal conductivity,impedance spectroscopy, | en |
dc.relation.page | 138 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2015-11-30 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 3.78 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。