請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51695
標題: | 雙波段量子井紅外線光譜讀出電路設計 Design of a Dual-band Quantum-well IR Spectrogram Readout Circuit |
作者: | Shih-Yao Yin 鄞詩堯 |
指導教授: | 陳少傑(Sao-Jie Chen) |
關鍵字: | 雙波段,量子井,讀出電路,緩衝式直接輸入,直接輸入, Dual-band,Quantum-well,Readout Circuit,Buffer Direct Injection,Direct Injection, |
出版年 : | 2015 |
學位: | 碩士 |
摘要: | 本論文提出一個可以提供雙波段量子井紅外線偵測器(Dual-band Quantum-well IR detectors)正偏壓和負偏壓的讀出電路(Readout Circuit)設計。藉由正負偏壓的轉換,我們的讀出電路可以讀出兩種不同波段的紅外光。整個讀出電路的設計包含一個兩階段放大器(Two-Stage Amplifier)所組成的緩衝式直接輸入(Buffer Direct Injection),一個直接輸入(Direct Injection),和一個共用的放大器。藉由這個共用的放大器,可以降低晶片的面積使用率以及整體的功耗。這個架構實現在互補式金氧半90奈米製程且其主要面積為80微米乘50微米。在1.2伏特下扣除輸出緩衝(Output Buffer)電路部分總共消耗167微瓦。緩衝式直接輸入的注入效率(Injection Efficiency)超過99.99%。有效的輸入電壓範圍為0.5微安培到1.2微安培,且輸出電壓擺幅接近0.55伏特。 This work presents the design of a readout circuit (ROIC) that provides positive and negative biases to a Dual-band Quantum-well (DQW) IR detectors. These two biases allow two bands of infrared light be detected and passed to the ROIC. The ROIC design contains a buffer direct injection (BDI) with a two-stage amplifier, direct injection (DI), and a shared amplifier. Using a shared amplifier, we can reduce the chip area and power consumption. A prototype is implemented in 90-nm 1P9M CMOS technology and its active area occupies 80 μm × 50 μm. Operating under 1.2V, the ROIC works at 0.3MHz frequency and has a power consumption of 167 μW without considering the output buffer. The injection efficiency of the BDI in this design can be up to 99.99%. The input photocurrent range is from 0.5 μA to 1.2 μA, and output swing approaches to 0.55V. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51695 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 2.51 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。