請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51141
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林致廷(Chih-Ting Lin) | |
dc.contributor.author | Wen-Yu Chuang | en |
dc.contributor.author | 莊芠羽 | zh_TW |
dc.date.accessioned | 2021-06-15T13:25:59Z | - |
dc.date.available | 2026-03-31 | |
dc.date.copyright | 2016-04-12 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-04-06 | |
dc.identifier.citation | 1 ITU,' Internet of Things Global Standards Initiative,' (2016).
2 Apcar, J. Routing in the Internet of Things/M2M Networks (2013). 3 Corp., I. I. (IEI Integration Corp., 2013). 4 Akyildiz, I. F., Su, W., Sankarasubramaniam, Y. & Cayirci, E. Wireless sensor networks: a survey. Computer Networks38, 393-422, doi:http://dx.doi.org/10.1016/S1389-1286(01)00302-4 (2002). 5 Sohrabi, K., Gao, J., Ailawadhi, V. & Pottie, G. J. Protocols for self-organization of a wireless sensor network. IEEE Personal Communications7, 16-27, doi:10.1109/98.878532 (2000). 6 Nagle, H. T., Gutierrez-Osuna, R. & Schiffman, S. S. The how and why of electronic noses. IEEE Spectrum35, 22-31, doi:10.1109/6.715180 (1998). 7 Pearce, T. C. Handbook of Machine Olfaction: Electronic Nose Technology. (Wiley-VCH, 2003). 8 Rakow, N. A. & Suslick, K. S. A colorimetric sensor array for odour visualization. Nature406, 710-713, doi:10.1038/35021028 (2000). 9 Zohora, S. E., Khan, A. M. & Hundewale, N. in Advances in Computing and Information Technology: Proceedings of the Second International Conference on Advances in Computing and Information Technology (ACITY) July 13-15, 2012, Chennai, India - Volume 3 (eds Natarajan Meghanathan, Dhinaharan Nagamalai, & Nabendu Chaki) 177-184 (Springer Berlin Heidelberg, 2013). 10 Mielle, P. ‘Electronic noses’: Towards the objective instrumental characterization of food aroma. Trends in Food Science & Technology7, 432-438, doi:http://dx.doi.org/10.1016/S0924-2244(96)10045-5 (1996). 11 Liu, X. et al. A Survey on Gas Sensing Technology. Sensors12, doi:10.3390/s120709635 (2012). 12 Arshak, K., Moore, E., Lyons, G. M., Harris, J. & Clifford, S. A review of gas sensors employed in electronic nose applications. Sensor Review24, 181-198, doi:doi:10.1108/02602280410525977 (2004). 13 Lee, C. H., Chuang, W. Y., Cowan, M. A., Wu, W. J. & Lin, C. T. A low-power integrated humidity CMOS sensor by printing-on-chip technology. Sensors (Basel)14, 9247-9255, doi:10.3390/s140509247 (2014). 14 Korotcenkov, G. Metal oxides for solid-state gas sensors: What determines our choice? Materials Science and Engineering: B139, 1-23 doi:http://dx.doi.org/10.1016/j.mseb.2007.01.044 (2007). 15 Peters, J. M. et al. A study of twelve Southern California communities with differing levels and types of air pollution. II. Effects on pulmonary function. American journal of respiratory and critical care medicine159, 768-775, doi:10.1164/ajrccm.159.3.9804144 (1999). 16 Health effects of nitrogen oxides, 2011). 17 Chang, C.-T. & Lin, K.-L. Assessment of the strategies for reducing VOCs emission from polyurea-formaldehyde resin synthetic fiber leather industry in Taiwan. Resources, Conservation and Recycling46, 321-334, doi:http://dx.doi.org/10.1016/j.resconrec.2005.08.007 (2006). 18 Knake, R., Jacquinot, P. & Hauser, P. C. Amperometric Detection of Gaseous Formaldehydein the ppb Range. Electroanalysis13, 631-634, doi:10.1002/1521-4109(200105)13:8/9<631::AID-ELAN631>3.0.CO;2-Z (2001). 19 Salthammer, T., Mentese, S. & Marutzky, R. Formaldehyde in the Indoor Environment. Chemical Reviews110, 2536-2572, doi:10.1021/cr800399g (2010). 20 Chung, F.-C., Zhu, Z., Luo, P.-Y., Wu, R.-J. & Li, W. Au@ZnO core–shell structure for gaseous formaldehyde sensing at room temperature. Sensors and Actuators B: Chemical199, 314-319, doi:http://dx.doi.org/10.1016/j.snb.2014.04.004 (2014). 21 Wang, J., Zhang, P., Qi, J.-Q. & Yao, P.-J. Silicon-based micro-gas sensors for detecting formaldehyde. Sensors and Actuators B: Chemical136, 399-404, doi:http://dx.doi.org/10.1016/j.snb.2008.12.056 (2009). 22 Xia, T. X. Toxicity of toxic chemical substances: shanghai science and technology document publishing societies press: Shanghai. (1991). 23 Cogliano, V. J. et al. Meeting Report: Summary of IARC Monographs on Formaldehyde, 2-Butoxyethanol, and 1-tert-Butoxy-2-Propanol. Environmental Health Perspectives113, 1205-1208, doi:10.1289/ehp.7542 (2005). 24 Formaldehyde, 2-butoxyethanol and 1-tert-butoxypropan-2-ol. IARC monographs on the evaluation of carcinogenic risks to humans / World Health Organization, International Agency for Research on Cancer88, 1-478 (2006). 25 Rumchev, K. B., Spickett, J. T., Bulsara, M. K., Phillips, M. R. & Stick, S. M. Domestic exposure to formaldehyde significantly increases the risk of asthma in young children. The European respiratory journal20, 403-408 (2002). 26 Beane Freeman, L. E. et al. Mortality From Lymphohematopoietic Malignancies Among Workers in Formaldehyde Industries: The National Cancer Institute Cohort. JNCI Journal of the National Cancer Institute101, 751-761, doi:10.1093/jnci/djp096 (2009). 27 Sellakumar, A. R., Snyder, C. A., Solomon, J. J. & Albert, R. E. Carcinogenicity of formaldehyde and hydrogen chloride in rats. Toxicology and Applied Pharmacology81, 401-406, doi:http://dx.doi.org/10.1016/0041-008X(85)90411-9 (1985). 28 Blair, A. et al. Mortality among industrial workers exposed to formaldehyde. Journal of the National Cancer Institute76, 1071-1084 (1986). 29 Affairs, M. o. C. Evaluation of Alleged Unacceptable Formaldehyde Levels in Clothing 1-12 (2007). 30 Sensing, G. CO2-based Ventilation Control In Education Facilities, 2007). 31 Cundrle, I., Jr., Somers, V. K., Johnson, B. D., Scott, C. G. & Olson, L. J. Exercise end-tidal CO2 predicts central sleep apnea in patients with heart failure. Chest147, 1566-1573, doi:10.1378/chest.14-2114 (2015). 32 Puligundla, P., Jung, J. & Ko, S. Carbon dioxide sensors for intelligent food packaging applications. Food Control25, 328-333, doi:http://dx.doi.org/10.1016/j.foodcont.2011.10.043 (2012). 33 Wattson. Humidity in Your Home – The Key to Comfort & Savings?, 2015). 34 Hernandez-Ramirez, F. et al. Water vapor detection with individual tin oxide nanowires. Nanotechnology18, 424016, doi:10.1088/0957-4484/18/42/424016 (2007). 35 Arundel, A. V., Sterling, E. M., Biggin, J. H. & Sterling, T. D. Indirect health effects of relative humidity in indoor environments. Environmental Health Perspectives65, 351-361 (1986). 36 Writer, S. Extreme Humidity Safety, 2015). 37 Vyas, R. et al. Enhanced NO2 sensing using ZnO–TiO2 nano composite thin films. Journal of Alloys and Compounds554, 59-63, doi:http://dx.doi.org/10.1016/j.jallcom.2012.11.059 (2013). 38 Gonullu, Y., Haidry, A. A. & Saruhan, B. Nanotubular Cr-doped TiO2 for use as high-temperature NO2 gas sensor. Sensors and Actuators B: Chemical217, 78-87, doi:http://dx.doi.org/10.1016/j.snb.2014.11.065 (2015). 39 You, L. et al. Highly sensitive NO2 sensor based on square-like tungsten oxide prepared with hydrothermal treatment. Sensors and Actuators B: Chemical157, 401-407, doi:http://dx.doi.org/10.1016/j.snb.2011.04.071 (2011). 40 Kaur, J., Roy, S. C. & Bhatnagar, M. C. Highly sensitive SnO2 thin film NO2 gas sensor operating at low temperature. Sensors and Actuators B: Chemical123, 1090-1095, doi:http://dx.doi.org/10.1016/j.snb.2006.11.031 (2007). 41 R. H. Bari, S. B. P. Improved NO2 Sensing Performance of Nanostructured Zn-Doped SnO2 Thin Films. International Journal of TechnoChem Research1, 86-96 (2015). 42 Navale, S. T. et al. Synthesis of Fe2O3 nanoparticles for nitrogen dioxide gas sensing applications. Ceramics International39, 6453-6460, doi:http://dx.doi.org/10.1016/j.ceramint.2013.01.074 (2013). 43 Chang, C.-J., Lin, C.-Y., Chen, J.-K. & Hsu, M.-H. Ce-doped ZnO nanorods based low operation temperature NO2 gas sensors. Ceramics International40, 10867-10875, doi:http://dx.doi.org/10.1016/j.ceramint.2014.03.080 (2014). 44 Chung, M. G. et al. Highly sensitive NO2 gas sensor based on ozone treated graphene. Sensors and Actuators B: Chemical166–167, 172-176, doi:http://dx.doi.org/10.1016/j.snb.2012.02.036 (2012). 45 Dua, V. et al. All-organic vapor sensor using inkjet-printed reduced graphene oxide. Angewandte Chemie (International ed. in English)49, 2154-2157, doi:10.1002/anie.200905089 (2010). 46 Liu, S., Wang, Z., Zhang, Y., Zhang, C. & Zhang, T. High performance room temperature NO2 sensors based on reduced graphene oxide-multiwalled carbon nanotubes-tin oxide nanoparticles hybrids. Sensors and Actuators B: Chemical211, 318-324, doi:http://dx.doi.org/10.1016/j.snb.2015.01.127 (2015). 47 Navale, S. T. et al. Highly selective and sensitive room temperature NO2 gas sensor based on polypyrrole thin films. Synthetic Metals189, 94-99, doi:http://dx.doi.org/10.1016/j.synthmet.2014.01.002 (2014). 48 Mabrook, M. F., Pearson, C. & Petty, M. C. Inkjet-printed polypyrrole thin films for vapour sensing. Sensors and Actuators B: Chemical115, 547-551, doi:http://dx.doi.org/10.1016/j.snb.2005.10.019 (2006). 49 Chougule, M. A. et al. Novel method for fabrication of room temperature polypyrrole–ZnO nanocomposite NO2 sensor. Measurement45, 1989-1996, doi:http://dx.doi.org/10.1016/j.measurement.2012.04.023 (2012). 50 Zampetti, E. et al. A high sensitive NO2 gas sensor based on PEDOT–PSS/TiO2 nanofibres. Sensors and Actuators B: Chemical176, 390-398, doi:http://dx.doi.org/10.1016/j.snb.2012.10.005 (2013). 51 Kubersky, P., Syrovy, T., Hamaček, A., Nešpůrek, S. & Syrova, L. Towards a fully printed electrochemical NO2 sensor on a flexible substrate using ionic liquid based polymer electrolyte. Sensors and Actuators B: Chemical209, 1084-1090, doi:http://dx.doi.org/10.1016/j.snb.2014.12.116 (2015). 52 Navale, S. T., Chougule, M. A., Patil, V. B. & Mane, A. T. Highly sensitive, reproducible, selective and stable CSA-polypyrrole NO2 sensor. Synthetic Metals189, 111-118, doi:http://dx.doi.org/10.1016/j.synthmet.2014.01.005 (2014). 53 Vishnuvardhan, T. K., Kulkarni, V. R., Basavaraja, C. & Raghavendra, S. C. Synthesis, characterization and a.c. conductivity of polypyrrole/Y2O3 composites. Bulletin of Materials Science29, 77-83, doi:10.1007/bf02709360. 54 P. Kubersky, T. Syrovy, A. Hamaček, S. Nešpůrek, L. Syrova,” Towards a fully printed electrochemical NO2 sensor on a flexible substrate using ionic liquid based polymer electrolyte,” Sensors and Actuators B, 209, pp. 1084–1090, 2015. 55 Takata, M., Tsubone, D. & Yanagida, H. Dependence of Electrical Conductivity of ZnO on Degree of Sintering. JOURNAL OF THE AMERICAN CERAMIC SOCIETY59, 4-8, doi:citeulike-article-id:1913919 (1976). 56 Afzal, A., Cioffi, N., Sabbatini, L. & Torsi, L. NOx sensors based on semiconducting metal oxide nanostructures: Progress and perspectives. Sensors and Actuators B: Chemical171–172, 25-42, doi:http://dx.doi.org/10.1016/j.snb.2012.05.026 (2012). 57 Comita, P. B. & Brauman, J. I. Gas-Phase Ion Chemistry. Science227, 863-869, doi:10.1126/science.227.4689.863 (1985). 58 Shimizu, Y. & Egashira, M. Basic Aspects and Challenges of Semiconductor Gas Sensors. MRS Bulletin24, 18-24, doi:doi:10.1557/S0883769400052465 (1999). 59 G. Neri, A. B., C. Pace, S. Patane', A. Arena, M. Allegrini, S. Galvagno. in The XIII Eurosensors Conference. 149-152. 60 Neri, G., Bonavita, A., Milone, C., Pistone, A. & Galvagno, S. Gold promoted Li–Fe2O3 thin films for humidity sensors. Sensors and Actuators B: Chemical92, 326-330, doi:http://dx.doi.org/10.1016/S0925-4005(03)00272-7 (2003). 61 Neri, G., Bonavita, A., Galvagno, S., Donato, N. & Caddemi, A. Electrical characterization of Fe2O3 humidity sensors doped with Li+, Zn2+ and Au3+ ions. Sensors and Actuators B: Chemical111–112, 71-77, doi:http://dx.doi.org/10.1016/j.snb.2005.06.061 (2005). 62 Nguyen Thi Le, H., Bernard, M. C., Garcia-Renaud, B. & Deslouis, C. Raman spectroscopy analysis of polypyrrole films as protective coatings on iron. Synthetic Metals140, 287-293, doi:http://dx.doi.org/10.1016/S0379-6779(03)00376-X (2004). 63 Santos, M. J. L., Brolo, A. G. & Girotto, E. M. Study of polaron and bipolaron states in polypyrrole by in situ Raman spectroelectrochemistry. Electrochimica Acta52, 6141-6145, doi:http://dx.doi.org/10.1016/j.electacta.2007.03.070 (2007). 64 M. A. Chougule, S. G. P., P. R. Godse, R. N. Mulik, Shashwati Sen, V. B. Patil, . Synthesis and Characterization of Polypyrrole (PPy) Thin Films Soft Nanoscience Letters1, 6-10 doi:10.4236/snl.2011.11002 (2011). 65 Joshi, A., Gangal, S. A. & Gupta, S. K. Ammonia sensing properties of polypyrrole thin films at room temperature. Sensors and Actuators B: Chemical156, 938-942, doi:http://dx.doi.org/10.1016/j.snb.2011.03.009 (2011). 66 Liu, J., Wang, W., Li, S., Liu, M. & He, S. Advances in SAW Gas Sensors Based on the Condensate-Adsorption Effect. Sensors, doi:10.3390/s111211871 (2011). 67 Mine, Y. et al. Detection of formaldehyde using mid-infrared difference-frequency generation. Applied Physics B65, 771-774, doi:10.1007/s003400050344. 68 Chung, P.-R., Tzeng, C.-T., Ke, M.-T. & Lee, C.-Y. Formaldehyde Gas Sensors: A Review. Sensors (Basel, Switzerland)13, 4468-4484, doi:10.3390/s130404468 (2013). 69 Lin, Y. et al. Preparation of Pd nanoparticle-decorated hollow SnO2 nanofibers and their enhanced formaldehyde sensing properties. Journal of Alloys and Compounds651, 690-698, doi:http://dx.doi.org/10.1016/j.jallcom.2015.08.174 (2015). 70 Lv, P. et al. Study on a micro-gas sensor with SnO2–NiO sensitive film for indoor formaldehyde detection. Sensors and Actuators B: Chemical132, 74-80, doi:http://dx.doi.org/10.1016/j.snb.2008.01.018 (2008). 71 Daza, L., Dassy, S. & Delmon, B. Chemical sensors based on SnO2 and WO3 for the detection of formaldehyde: cooperative effects. Sensors and Actuators B: Chemical10, 99-105, doi:http://dx.doi.org/10.1016/0925-4005(93)80032-7 (1993). 72 Zhang, L. et al. High sensitive and selective formaldehyde sensors based on nanoparticle-assembled ZnO micro-octahedrons synthesized by homogeneous precipitation method. Sensors and Actuators B: Chemical160, 364-370, doi:http://dx.doi.org/10.1016/j.snb.2011.07.062 (2011). 73 Dong, C. et al. Nonaqueous synthesis of Ag-functionalized In2O3/ZnO nanocomposites for highly sensitive formaldehyde sensor. Sensors and Actuators B: Chemical224, 193-200, doi:http://dx.doi.org/10.1016/j.snb.2015.09.107 (2016). 74 Han, N. et al. CdO activated Sn-doped ZnO for highly sensitive, selective and stable formaldehyde sensor. Sensors and Actuators B: Chemical152, 324-329, doi:http://dx.doi.org/10.1016/j.snb.2010.12.029 (2011). 75 CHEN, T., ZHOU, Z. & WANG, Y. Effects of calcining temperature on the phase structure and the formaldehyde gas sensing properties of CdO-mixed In2O3. Vol. 135 (Elsevier, 2009). 76 Castro-Hurtado, I., Mandayo, G. G. & Castano, E. Conductometric formaldehyde gas sensors. A review: From conventional films to nanostructured materials. Thin Solid Films548, 665-676, doi:http://dx.doi.org/10.1016/j.tsf.2013.04.083 (2013). 77 Jeong,H.Y.etal.Flexibleroom-temperatureNO2gassensorsbasedoncarbon nanotubes/reduced graphene hybrid films. Applied Physics Letters96, 213105, doi:doi:http://dx.doi.org/10.1063/1.3432446 (2010). 78 Basu, S. & Bhattacharyya, P. Recent developments on graphene and graphene oxide based solid state gas sensors. Sensors and Actuators B: Chemical173, 1-21, doi:http://dx.doi.org/10.1016/j.snb.2012.07.092 (2012). 79 Hill, E. W., Vijayaragahvan, A. & Novoselov, K. Graphene Sensors. IEEE Sensors Journal11, 3161-3170, doi:10.1109/JSEN.2011.2167608 (2011). 80 Chen, C., Xu, K., Ji, X., Miao, L. & Jiang, J. Enhanced adsorption of acidic gases (CO2, NO2 and SO2) on light metal decorated graphene oxide. Physical chemistry chemical physics : PCCP16, 11031-11036, doi:10.1039/c4cp00702f (2014). 81 Zhou, Y., Jiang, Y., Xie, T., Tai, H. & Xie, G. A novel sensing mechanism for resistive gas sensors based on layered reduced graphene oxide thin films at room temperature. Sensors and Actuators B: Chemical203, 135-142, doi:http://dx.doi.org/10.1016/j.snb.2014.06.105 (2014). 82 Yoon, H. J. et al. Carbon dioxide gas sensor using a graphene sheet. Sensors and Actuators B: Chemical157, 310-313, doi:http://dx.doi.org/10.1016/j.snb.2011.03.035 (2011). 83 Alizadeh, T. & Soltani, L. H. Graphene/poly(methyl methacrylate) chemiresistor sensor for formaldehyde odor sensing. Journal of Hazardous Materials248–249, 401-406, doi:http://dx.doi.org/10.1016/j.jhazmat.2012.12.019 (2013). 84 Antwi-Boampong, S. & BelBruno, J. J. Detection of formaldehyde vapor using conductive polymer films. Sensors and Actuators B: Chemical182, 300-306, doi:http://dx.doi.org/10.1016/j.snb.2013.03.008 (2013). 85 Tripathi, S. N., Saini, P., Gupta, D. & Choudhary, V. Electrical and mechanical properties of PMMA/reduced graphene oxide nanocomposites prepared via in situ polymerization. Journal of Materials Science48, 6223-6232, doi:10.1007/s10853-013-7420-8 (2013). 86 Ferrari, A. C. & Robertson, J. Raman spectroscopy of amorphous, nanostructured, diamond–like carbon, and nanodiamond. Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences362, 2477-2512, doi:10.1098/rsta.2004.1452 (2004). 87 Cancado, L. G. et al. Quantifying Defects in Graphene via Raman Spectroscopy at Different Excitation Energies. Nano Letters11, 3190-3196, doi:10.1021/nl201432g (2011). 88 Muhammad Hafiz, S. et al. A practical carbon dioxide gas sensor using room-temperature hydrogen plasma reduced graphene oxide. Sensors and Actuators B: Chemical193, 692-700, doi:http://dx.doi.org/10.1016/j.snb.2013.12.017 (2014). 89 Ong, K. & Grimes, C. A Carbon Nanotube-based Sensor for CO2 Monitoring. Sensors1, 193 (2001). 90 Amin Firouzi, S. S., Faizah Mohd Yasin, Fakhru'l Razi Ahmadun. CH4 and CO2 Detection by Using Carbon Nanotube-Based Sensors. Advanced Materials Research214, 482-489, doi:10.4028/www.scientific.net/AMR.214.482 (2011). 91 Lupan, O. et al. Nanostructured zinc oxide films synthesized by successive chemical solution deposition for gas sensor applications. Materials Research Bulletin44, 63-69, doi:http://dx.doi.org/10.1016/j.materresbull.2008.04.006 (2009). 92 Hernandez,S.C.etal.HybridZnO/SWNT Nanostructures Based Gas Sensor. Electroanalysis24, 1613-1620, doi:10.1002/elan.201200135 (2012). 93 Habib, M., Hussain, S. S., Riaz, S. & Naseem, S. Preparation and Characterization of ZnO Nanowires and their Applications in CO2 Gas Sensors. Materials Today: Proceedings2, 5714-5719, doi:http://dx.doi.org/10.1016/j.matpr.2015.11.116 (2015). 94 Chen, G., Han, B., Deng, S., Wang, Y. & Wang, Y. Lanthanum Dioxide Carbonate La2O2CO3 Nanorods as a Sensing Material for Chemoresistive CO2 Gas Sensor. Electrochimica Acta127, 355-361, doi:http://dx.doi.org/10.1016/j.electacta.2014.02.075 (2014). 95 Michel, C. R., Martinez-Preciado, A. H., Parra, R., Aldao, C. M. & Ponce, M. A. Novel CO2 and CO gas sensor based on nanostructured Sm2O3 hollow microspheres. Sensors and Actuators B: Chemical202, 1220-1228, doi:http://dx.doi.org/10.1016/j.snb.2014.06.038 (2014). 96 Wang, X., Qin, H., Sun, L. & Hu, J. CO2 sensing properties and mechanism of nanocrystalline LaFeO3 sensor. Sensors and Actuators B: Chemical188, 965-971, doi:http://dx.doi.org/10.1016/j.snb.2013.07.100 (2013). 97 Doan, T. C. D. et al. Carbon dioxide detection with polyethylenimine blended with polyelectrolytes. Sensors and Actuators B: Chemical201, 452-459, doi:http://dx.doi.org/10.1016/j.snb.2014.05.023 (2014). 98 Tonosaki, T., Oho, T., Shiigi, H., Isomura, K. & Ogura, K. Highly Sensitive CO2 Sensor with Polymer Composites Operating at Room Temperature. Analytical Sciences/Supplements17icas, i249-i252, doi:10.14891/analscisp.17icas.0.i249.0 (2002). 99 Chen, X., Wong, C. K. Y., Yuan, C. A. & Zhang, G. Impact of the functional group on the working range of polyaniline as carbon dioxide sensors. Sensors and Actuators B: Chemical175, 15-21, doi:http://dx.doi.org/10.1016/j.snb.2011.11.054 (2012). 100 Ogura, K. & Shiigi, H. A CO2 Sensing Composite Film Consisting of Base- Type Polyaniline and Poly(vinyl alcohol). Electrochemical and Solid-State Letters2, 478-480, doi:10.1149/1.1390876 (1999). 101 Oho, T., Tonosaki, T., Isomura, K. & Ogura, K. A CO2 sensor operating under high humidity. Journal of Electroanalytical Chemistry522, 173-178, doi:http://dx.doi.org/10.1016/S0022-0728(02)00712-X (2002). 102 Doan, T. C. D. et al. Carbon dioxide sensing with sulfonated polyaniline. Sensors and Actuators B: Chemical168, 123-130, doi:http://dx.doi.org/10.1016/j.snb.2012.03.065 (2012). 103 Chen, X. P., Wong, C. K. Y., Yuan, C. A. & Zhang, G. Q. Evaluation and selection of sensing materials for carbon dioxide (CO2) sensor by molecular modeling. Procedia Engineering25, 379-382, doi:http://dx.doi.org/10.1016/j.proeng.2011.12.094 (2011). 104 Chiang, C.-J. et al. In situ fabrication of conducting polymer composite film as a chemical resistive CO2 gas sensor. Microelectronic Engineering111, 409-415, doi:http://dx.doi.org/10.1016/j.mee.2013.04.014 (2013). 105 Neethirajan, S. et al. Development of carbon dioxide (CO2) sensor for grain quality monitoring. Biosystems Engineering106, 395-404, doi:http://dx.doi.org/10.1016/j.biosystemseng.2010.05.002 (2010). 106 Ko, Y. G., Shin, S. S. & Choi, U. S. Primary, secondary, and tertiary amines for CO2 capture: Designing for mesoporous CO2 adsorbents. Journal of Colloid and Interface Science361, 594-602, doi:http://dx.doi.org/10.1016/j.jcis.2011.03.045 (2011). 107 Patel, S. V., Hobson, S. T., Cemalovic, S. & Mlsna, T. E. Materials for capacitive carbon dioxide microsensors capable of operating at ambient temperatures. Journal of Sol-Gel Science and Technology53, 673-679, doi:10.1007/s10971-010-2149-1 (2010). 108 Irimia-Vladu, M. & Fergus, J. W. Suitability of emeraldine base polyaniline-PVA composite film for carbon dioxide sensing. Synthetic Metals156, 1401-1407, doi:http://dx.doi.org/10.1016/j.synthmet.2006.11.005 (2006). 109 Chen, X. P., Yuan, C. A., Wong, C. K. Y., Koh, S. W. & Zhang, G. Q. Validation of forcefields in predicting the physical and thermophysical properties of emeraldine base polyaniline. Molecular Simulation37, 990-996, doi:10.1080/08927022.2011.562503 (2011). 110 Yue, J., Wang, Z. H., Cromack, K. R., Epstein, A. J. & MacDiarmid, A. G. Effect of sulfonic acid group on polyaniline backbone. Journal of the American Chemical Society113, 2665-2671, doi:10.1021/ja00007a046 (1991). 111 Yue, J., Epstein, A. J. & Macdiarmid, A. G. Sulfonic Acid Ring-Substituted Polyaniline, A Self-Doped Conducting Polymer. Molecular Crystals and Liquid Crystals Incorporating Nonlinear Optics189, 255-261, doi:10.1080/00268949008037237 (1990). 112 Yue, J. & Epstein, A. J. Synthesis of self-doped conducting polyaniline. Journal of the American Chemical Society112, 2800-2801, doi:10.1021/ja00163a051 (1990). 113 Parameters, S. a. P. (ed American Society of Anesthesiologists) 1-4 (2015). 114 Paruthi, S. et al. End-Tidal Carbon Dioxide Measurement during Pediatric Polysomnography: Signal Quality, Association with Apnea Severity, and Prediction of Neurobehavioral Outcomes. Sleep38, 1719-1726, doi:10.5665/sleep.5150 (2015). 115 Pishbin, E. et al. The correlation between end-tidal carbon dioxide and arterial blood gas parameters in patients evaluated for metabolic acid-base disorders. Electronic physician7, 1095-1101, doi:10.14661/2015.1095-1101 (2015). 116 Pearce, A. K., Davis, D. P., Minokadeh, A. & Sell, R. E. Initial end-tidal carbon dioxide as a prognostic indicator for inpatient PEA arrest. Resuscitation92, 77-81, doi:10.1016/j.resuscitation.2015.04.025 (2015). 117 Dimitriev, O. P., Piryatinski, Y. P. & Pud, A. A. Evidence of the controlled interaction between PEDOT and PSS in the PEDOT:PSS complex via concentration changes of the complex solution. The journal of physical chemistry. B115, 1357-1362, doi:10.1021/jp110545t (2011). 118 Xia, Y. & Ouyang, J. Salt-Induced Charge Screening and Significant Conductivity Enhancement of Conducting Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate). Macromolecules42, 4141-4147, doi:10.1021/ma900327d (2009). 119Dimitriev,O. P. Cooperative doping in polyaniline-poly(ethylene-3,4-dioxythiophene): poly(styrenesulfonic acid) composite system. Journal of Polymer Research18, 2435-2440, doi:10.1007/s10965-011-9657-8 (2011). 120 prevention, C. f. d. c. a. Indoor Environmental Quality, 2013). 121 Chang-Hung, L., Wen-Yu, C., Shih-Hui, L., Wen-Jong, W. & Chih-Ting, L. A Printable Humidity Sensing Material Based on Conductive Polymer and Nanoparticles Composites. Japanese Journal of Applied Physics52, 05DA08 (2013). 122 LIN et al.Fabrication of PZT MEMS energy harvester based on silicon and stainless-steel substrates utilizing an aerosol deposition method. Vol. 23 (Institute of Physics, 2013). 123 Chen, J. J., Lien, Y. C., Kuo, C. L. & Wu, W. J. in Nano/Micro Engineered and Molecular Systems (NEMS), 2015 IEEE 10th International Conference on. 619-622. 124 in Trends Magazine 35 (2014). 125 Vijay, R., Kansal, A., Hsu, J., Friedman, J. & Mani, S. in Information Processing in Sensor Networks, 2005. IPSN 2005. Fourth International Symposium on. 457-462. 126 Dunkels, A., Gr, B., x00F, nvall & Voigt, T. in Local Computer Networks, 2004. 29th Annual IEEE International Conference on. 455-462. 127 Kong, T., Su, R., Zhang, B., Zhang, Q. & Cheng, G. CMOS-compatible, label-free silicon-nanowire biosensors to detect cardiac troponin I for acute myocardial infarction diagnosis. Biosensors and Bioelectronics34, 267-272, doi:http://dx.doi.org/10.1016/j.bios.2012.02.019 (2012). 128 Liu, J., Agarwal, M., Varahramyan, K., Berney Iv, E. S. & Hodo, W. D. Polymer-based microsensor for soil moisture measurement. Sensors and Actuators B: Chemical129, 599-604, doi:http://dx.doi.org/10.1016/j.snb.2007.09.017 (2008). 129 Borsenberger, P. M. & Bassler, H. Concerning the role of dipolar disorder on charge transport in molecularly doped polymers. The Journal of Chemical Physics95, 5327-5331, doi:doi:http://dx.doi.org/10.1063/1.461646 (1991). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51141 | - |
dc.description.abstract | 為了克服感測器整合於物聯網應用之困難,本論文利用噴印技術研發了四種
氣體感測材料,如二氧化碳、二氧化氮、甲醛、濕度。藉由噴印技術與高分子材 料所具有的特點,例如低製作成本、低功耗的特性,使其易與無線網路系統整合。 此外,藉由噴印式氣體感測材料、自供電無線傳輸模組、太陽能板、自製壓電式 能源擷取器之整合也證實了噴印式高分子感測器應用於物聯網的潛力。 此研究針對導電及非導電高分子材料進行研發作為噴印式感測材料之應用。 混合不同的奈米粒子提升感測材料之感測特性。為了瞭解感測材料之感測機制也 針對這些材料進行材料分析,如傅立葉紅外線轉換光譜儀、紫外線可見光譜儀, 並且驗證了噴印式感測材料之靈敏度及選擇性測試。這些高分子感測材料也被證 實僅需數十微瓦功率便能運作。藉由這些研究成果,化學感測之應用可朝新一代 物聯網邁進。 | zh_TW |
dc.description.abstract | To conquer obstacles in design-implementation of sensors for Internet-of-Things (IoT) applications, in this dissertation, four kinds of printable ambient gas sensors, i.e. CO2, NO2, formaldehyde, and humidity, were investigated. By employing printing technologies and functional polymer materials, several key features, e.g. low power consumption, low manufacturing cost, and easy integration with network system, can be obtained. Furthermore, the potential of printable polymer sensor for IoT application was also demonstrated by an implementation of a self-powered wireless sensor module integrated with an off-the-shelf solar panel and a self-developed piezoelectric energy harvester.
To develop the proposed printable polymer sensing materials, both conductive and dielectric polymers were investigated. Mixed with metal oxide based nanoparticles, sensing characteristics of the developed sensing materials can be improved. To investigate the possible sensing mechanisms of the developed sensing materials, material analyses, such as fourier transform infrared spectroscopy (FTIR) and ultraviolet-visible spectroscopy (UV-vis), were employed. In addition, sensitivity and selectivity were tested to validate the developments of proposed printable sensors. The developed polymer sensors were also verified to have tens of micro-watt power consumptions. With these developed works, chemical sensing capabilities of next generation IoT applications can carry forward. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T13:25:59Z (GMT). No. of bitstreams: 1 ntu-105-D99943047-1.pdf: 4244820 bytes, checksum: 4bab79ca18d6f9b9fa01ab8954ad7685 (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 口試委員會審定書 ................................................................. i
致謝 ............................................................................................ ii 摘要 ........................................................................................... iii Abstract .................................................................................... iv CONTENTS ............................................................................. vi LIST OF FIGURES...............................................................viii LIST OF TABLES .................................................................... x Chapter1 Introduction ........................................................ - 1 - 1.1 Research Background ...................................................- 2 - 1.1.1 Sensor Types ..............................................................- 3 - 1.1.2 Indoor air quality detection.................................................- 7 - 1.2 Research Objective ........................................................................- 12 - 1.3 Organization of this Dissertation.......................................................- 13 - Chapter 2 NO2 Sensor ....................................................... - 15 - 2.1 Review .....................................................................................- 15 - 2.2 PPy/AZO/Fe2O3 sensing film preparation........................................- 16 - 2.3 Measurement................................................................................- 18 - 2.4 Results and Discussion....................................................................- 20 - 2.4.1 Sensor characterization for NO2 detection....................................- 20 - 2.4.2 Characteristics..........................................................................- 25 - 2.5 Summary ....................................................................................- 29 - Chapter 3 Formaldehyde sensor ................................... - 30 - 3.1 Review .........................................................................................- 30 - 3.2 RGO/PMMA sensing film preparation ...............................................- 32 - 3.3 Measurement.................................................................................- 32 - 3.4 Results and Discussion...............................................................- 34 - 3.4.1 SEM and FTIR analysis..................................................................- 34 - 3.4.2 Sensor characterization for formaldehyde detection................- 37 - 3.5 Summary ....................................................................................- 42 - Chapter 4 CO2 Sensor ....................................................... - 43 - 4.1 Review ......................................................................................- 43 - 4.2 SPAN-Na sensor for End-tidal CO2 detection..................................- 47 - 4.2.1 Sensing film preparation......................................................- 47 - 4.2.2 Results and Discussion ................................................................- 48 - 4.3 EB-PANI/PEDOT:PSS for environmental monitoring .....................- 54 - 4.3.1 Sensing film preparation.............................................................- 55 - 4.3.2 Results and Discussion ................................................................- 55 - 4.4 Summary .......................................................................................- 59 - Chapter 5 Humidity sensor ............................................... - 61 - 5.1 Review .............................................................................................- 61 - 5.2 Self-sustained Wireless Humidity Sensor System ............................- 62 - 5.2.1 Solar-Powered Sensor Module (SPSM) System.............................- 62 - 5.2.2 Vibration Energy Harvesting System..................................- 71 - 5.3 Humidity sensor based on nanowire device.....................................- 74 - 5.3.1 Measurement..............................................................................- 77 - 5.3.2 Results and Discussion ...........................................................- 77 - 5.4 Summary ...................................................................................- 84 - Chapter 6 Conclusion ........................................................ - 86 - References........................................................................... - 88 - Appendix I Chemicals ..................................................... - 100 - Appendix II Characteristics............................................ - 101 - Appendix III Humidity sensor fabrication .................... - 102 - | |
dc.language.iso | en | |
dc.title | 可噴印式有機材料應用於低功耗氣體感測之研發 | zh_TW |
dc.title | The Development of Printable Organic Sensing Materials for Low-Power Gas Detections | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 賴朝松(Chao Sung Lai),吳文中(Wen-Jong Wu),楊家銘(Chia-Ming Yang),李昇憲(Sheng-Shian Li),施文彬(Wen-Pin Shih) | |
dc.subject.keyword | 物聯網,氣體感測器,二氧化氮,甲醛,二氧化碳,濕度, | zh_TW |
dc.subject.keyword | IoT,gas sensor,NO2,formaldehyde,CO2,Humidity, | en |
dc.relation.page | 102 | |
dc.identifier.doi | 10.6342/NTU201600175 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2016-04-06 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電子工程學研究所 | zh_TW |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-1.pdf 目前未授權公開取用 | 4.15 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。