請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51109完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 江宏仁(Hong-Ren Jiang) | |
| dc.contributor.author | Jhe-Wei Jhou | en |
| dc.contributor.author | 周哲緯 | zh_TW |
| dc.date.accessioned | 2021-06-15T13:25:21Z | - |
| dc.date.available | 2021-02-20 | |
| dc.date.copyright | 2021-02-20 | |
| dc.date.issued | 2021 | |
| dc.date.submitted | 2021-02-05 | |
| dc.identifier.citation | [1] S. C. Mannsfeld et al., 'Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers,' Nature materials, vol. 9, no. 10, pp. 859-864, 2010. [2] B. C. Tee, C. Wang, R. Allen, and Z. Bao, 'An electrically and mechanically self-healing composite with pressure-and flexion-sensitive properties for electronic skin applications,' Nature nanotechnology, vol. 7, no. 12, pp. 825-832, 2012. [3] K. Takei et al., 'Nanowire active-matrix circuitry for low-voltage macroscale artificial skin,' Nature materials, vol. 9, no. 10, pp. 821-826, 2010. [4] C. Wang et al., 'User-interactive electronic skin for instantaneous pressure visualization,' Nature materials, vol. 12, no. 10, pp. 899-904, 2013. [5] T. Someya, T. Sekitani, S. Iba, Y. Kato, H. Kawaguchi, and T. Sakurai, 'A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applications,' Proceedings of the National Academy of Sciences, vol. 101, no. 27, pp. 9966-9970, 2004. [6] D.-H. Kim et al., 'Epidermal electronics,' science, vol. 333, no. 6044, pp. 838-843, 2011. [7] L. Liu, Y. Yu, C. Yan, K. Li, and Z. Zheng, 'Wearable energy-dense and power-dense supercapacitor yarns enabled by scalable graphene–metallic textile composite electrodes,' Nature communications, vol. 6, no. 1, pp. 1-9, 2015. [8] Y. Song et al., 'Highly compressible integrated supercapacitor–piezoresistance‐sensor system with CNT–PDMS sponge for health monitoring,' Small, vol. 13, no. 39, p. 1702091, 2017. [9] X. Huang et al., 'Materials and designs for wireless epidermal sensors of hydration and strain,' Advanced Functional Materials, vol. 24, no. 25, pp. 3846-3854, 2014. [10] J. Park et al., 'Tactile-direction-sensitive and stretchable electronic skins based on human-skin-inspired interlocked microstructures,' ACS nano, vol. 8, no. 12, pp. 12020-12029, 2014. [11] D. J. Lipomi et al., 'Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes,' Nature nanotechnology, vol. 6, no. 12, pp. 788-792, 2011. [12] T. Yamada et al., 'A stretchable carbon nanotube strain sensor for human-motion detection,' Nature nanotechnology, vol. 6, no. 5, p. 296, 2011. [13] Z.-M. Dang, M.-J. Jiang, D. Xie, S.-H. Yao, L.-Q. Zhang, and J. Bai, 'Supersensitive linear piezoresistive property in carbon nanotubes∕ silicone rubber nanocomposites,' Journal of Applied physics, vol. 104, no. 2, p. 024114, 2008. [14] J.-W. Han, B. Kim, J. Li, and M. Meyyappan, 'Flexible, compressible, hydrophobic, floatable, and conductive carbon nanotube-polymer sponge,' Applied physics letters, vol. 102, no. 5, p. 051903, 2013. [15] Q. Li et al., 'Engineering of carbon nanotube/polydimethylsiloxane nanocomposites with enhanced sensitivity for wearable motion sensors,' Journal of Materials Chemistry C, vol. 5, no. 42, pp. 11092-11099, 2017. [16] Y. Song et al., 'All-in-one piezoresistive-sensing patch integrated with micro-supercapacitor,' Nano Energy, vol. 53, pp. 189-197, 2018. [17] H. B. Yao, G. Huang, C. H. Cui, X. H. Wang, and S. H. Yu, 'Macroscale elastomeric conductors generated from hydrothermally synthesized metal‐polymer hybrid nanocable sponges,' Advanced Materials, vol. 23, no. 32, pp. 3643-3647, 2011. [18] Y. Tang, S. Gong, Y. Chen, L. W. Yap, and W. Cheng, 'Manufacturable conducting rubber ambers and stretchable conductors from copper nanowire aerogel monoliths,' ACS nano, vol. 8, no. 6, pp. 5707-5714, 2014. [19] L. Wang, F. Ma, Q. Shi, H. Liu, and X. Wang, 'Study on compressive resistance creep and recovery of flexible pressure sensitive material based on carbon black filled silicone rubber composite,' Sensors and Actuators A: Physical, vol. 165, no. 2, pp. 207-215, 2011. [20] L. Wang, T. Ding, and P. Wang, 'Effects of instantaneous compression pressure on electrical resistance of carbon black filled silicone rubber composite during compressive stress relaxation,' Composites Science and Technology, vol. 68, no. 15-16, pp. 3448-3450, 2008. [21] W. Luheng, D. Tianhuai, and W. Peng, 'Effects of conductive phase content on critical pressure of carbon black filled silicone rubber composite,' Sensors and Actuators A: Physical, vol. 135, no. 2, pp. 587-592, 2007. [22] M. H. Al-Saleh and U. Sundararaj, 'An innovative method to reduce percolation threshold of carbon black filled immiscible polymer blends,' Composites Part A: Applied Science and Manufacturing, vol. 39, no. 2, pp. 284-293, 2008. [23] H. Kou et al., 'Wireless wide-range pressure sensor based on graphene/PDMS sponge for tactile monitoring,' Scientific reports, vol. 9, no. 1, pp. 1-7, 2019. [24] H. Kou et al., 'Wireless flexible pressure sensor based on micro-patterned Graphene/PDMS composite,' Sensors and Actuators A: Physical, vol. 277, pp. 150-156, 2018. [25] N. Yogeswaran, S. Tinku, S. Khan, L. Lorenzelli, V. Vinciguerra, and R. Dahiya, 'Stretchable resistive pressure sensor based on CNT-PDMS nanocomposites,' in 2015 11th Conference on Ph. D. Research in Microelectronics and Electronics (PRIME), 2015, pp. 326-329: IEEE. [26] G. Yu, J. Hu, J. Tan, Y. Gao, Y. Lu, and F. Xuan, 'A wearable pressure sensor based on ultra-violet/ozone microstructured carbon nanotube/polydimethylsiloxane arrays for electronic skins,' Nanotechnology, vol. 29, no. 11, p. 115502, 2018. [27] A. Sepúlveda et al., 'Nanocomposite flexible pressure sensor for biomedical applications,' Procedia Engineering, vol. 25, pp. 140-143, 2011. [28] D. Maddipatla, B. B. Narakathu, M. M. Ali, A. A. Chlaihawi, and M. Z. Atashbar, 'Development of a novel carbon nanotube based printed and flexible pressure sensor,' in 2017 IEEE Sensors Applications Symposium (SAS), 2017, pp. 1-4: IEEE. [29] Y. Jung, M. G. Shin, H. J. Tak, K. K. Jung, and J. S. Ko, 'Flexible pressure sensor made using PDMS containing carbon nanotubes,' in 2018 IEEE Micro Electro Mechanical Systems (MEMS), 2018, pp. 501-503: IEEE. [30] N. Hu, Y. Karube, C. Yan, Z. Masuda, and H. Fukunaga, 'Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor,' Acta materialia, vol. 56, no. 13, pp. 2929-2936, 2008. [31] S. R. Broadbent and J. M. Hammersley, 'Percolation processes: I. Crystals and mazes,' in Mathematical Proceedings of the Cambridge Philosophical Society, 1957, vol. 53, no. 3, pp. 629-641: Cambridge University Press. [32] S. Kirkpatrick, 'Percolation and conduction,' Reviews of modern physics, vol. 45, no. 4, p. 574, 1973. [33] M. Loos, Carbon nanotube reinforced composites: CNT Polymer Science and Technology. Elsevier, 2014. [34] W. Bauhofer and J. Z. Kovacs, 'A review and analysis of electrical percolation in carbon nanotube polymer composites,' Composites Science and Technology, vol. 69, no. 10, pp. 1486-1498, 2009. [35] X. Jiang, Y. Bin, and M. Matsuo, 'Electrical and mechanical properties of polyimide–carbon nanotubes composites fabricated by in situ polymerization,' Polymer, vol. 46, no. 18, pp. 7418-7424, 2005. [36] M. Weber and M. R. J. P. c. Kamal, 'Estimation of the volume resistivity of electrically conductive composites,' vol. 18, no. 6, pp. 711-725, 1997. [37] Y. J. Kim, T. S. Shin, H. Do Choi, J. H. Kwon, Y.-C. Chung, and H. G. Yoon, 'Electrical conductivity of chemically modified multiwalled carbon nanotube/epoxy composites,' Carbon, vol. 43, no. 1, pp. 23-30, 2005. [38] G. Hu, C. Zhao, S. Zhang, M. Yang, and Z. Wang, 'Low percolation thresholds of electrical conductivity and rheology in poly (ethylene terephthalate) through the networks of multi-walled carbon nanotubes,' Polymer, vol. 47, no. 1, pp. 480-488, 2006. [39] D. Stauffer and A. Aharony, Introduction to percolation theory. CRC press, 2018. [40] J. Hwang et al., 'Poly (3-hexylthiophene) wrapped carbon nanotube/poly (dimethylsiloxane) composites for use in finger-sensing piezoresistive pressure sensors,' Carbon, vol. 49, no. 1, pp. 106-110, 2011. [41] K. Yoshimura, K. Nakano, K. Okamoto, and T. Miyake, 'Mechanical and electrical properties in porous structure of Ketjenblack/silicone–rubber composites,' Sensors and Actuators A: Physical, vol. 180, pp. 55-62, 2012. [42] H. Chen et al., 'Fingertip-inspired electronic skin based on triboelectric sliding sensing and porous piezoresistive pressure detection,' Nano Energy, vol. 40, pp. 65-72, 2017. [43] H. Høyer, M. Knaapila, J. Kjelstrup-Hansen, and G. Helgesen, 'Microelectromechanical strain and pressure sensors based on electric field aligned carbon cone and carbon black particles in a silicone elastomer matrix,' Journal of Applied Physics, vol. 112, no. 9, p. 094324, 2012. [44] S. Jang and H. Yin, 'Effect of aligned ferromagnetic particles on strain sensitivity of multi-walled carbon nanotube/polydimethylsiloxane sensors,' Applied Physics Letters, vol. 106, no. 14, p. 141903, 2015. [45] M. Hussain, Y.-H. Choa, and K. Niihara, 'Fabrication process and electrical behavior of novel pressure-sensitive composites,' Composites Part A: applied science and manufacturing, vol. 32, no. 12, pp. 1689-1696, 2001. [46] N. Hu, Z. Masuda, G. Yamamoto, H. Fukunaga, T. Hashida, and J. Qiu, 'Effect of fabrication process on electrical properties of polymer/multi-wall carbon nanotube nanocomposites,' Composites Part A: Applied Science and Manufacturing, vol. 39, no. 5, pp. 893-903, 2008. [47] K. Yoshimura et al., 'Effect of compressive and tensile strains on the electrical resistivity of carbon microcoil/silicone–rubber composites,' carbon, vol. 45, no. 10, pp. 1997-2003, 2007. [48] M. El Eraki, A. El Lawindy, H. Hassan, and W. Mahmoud, 'The physical properties of pressure sensitive rubber composites,' Polymer degradation and stability, vol. 91, no. 7, pp. 1417-1423, 2006. [49] I. Kang, M. A. Khaleque, Y. Yoo, P. J. Yoon, S.-Y. Kim, and K. T. Lim, 'Preparation and properties of ethylene propylene diene rubber/multi walled carbon nanotube composites for strain sensitive materials,' Composites Part A: Applied Science and Manufacturing, vol. 42, no. 6, pp. 623-630, 2011. [50] K. Arshak, D. Morris, A. Arshak, O. Korostynska, and E. Moore, 'PVB, PVAc and PS pressure sensors with interdigitated electrodes,' Sensors and Actuators A: Physical, vol. 132, no. 1, pp. 199-206, 2006. [51] M. Knite, V. Tupureina, A. Fuith, J. Zavickis, and V. Teteris, 'Polyisoprene—multi-wall carbon nanotube composites for sensing strain,' Materials Science and Engineering: C, vol. 27, no. 5-8, pp. 1125-1128, 2007. [52] M. Hakamada, Y. Asao, T. Kuromura, Y. Chen, H. Kusuda, and M. Mabuchi, 'Density dependence of the compressive properties of porous copper over a wide density range,' Acta Materialia, vol. 55, no. 7, pp. 2291-2299, 2007. [53] A. Klyshko, M. Balucani, and A. Ferrari, 'Mechanical strength of porous silicon and its possible applications,' Superlattices and Microstructures, vol. 44, no. 4-5, pp. 374-377, 2008. [54] Y. Li and M. Xu, 'Hysteresis and precondition of viscoelastic solid models,' Mechanics of Time-Dependent Materials, vol. 10, no. 2, pp. 113-123, 2006. [55] S. Jung et al., 'Reverse‐micelle‐induced porous pressure‐sensitive rubber for wearable human–machine interfaces,' Advanced Materials, vol. 26, no. 28, pp. 4825-4830, 2014. [56] 南極熊3d打印網. (2017, 11/12). Carbon nanotube. Available: https://kknews.cc/science/qyap8ag.html [57] Wikipedia. (1/17). Iron(II,III) oxide. Available: https://en.wikipedia.org/wiki/Iron(II,III)_oxide [58] Benjah-bmm27. (2009, 11/12). Flat (GCSE-style) structural formula of hexane, C6H14. Available: https://zh.wikipedia.org/wiki/%E5%B7%B1%E7%83%B7#/media/File:Hexane-2D-flat-B.png [59] J. I. Yoon, K. S. Choi, and S. P. Chang, 'A novel means of fabricating microporous structures for the dielectric layers of capacitive pressure sensor,' Microelectronic Engineering, vol. 179, pp. 60-66, 2017. [60] Y.-h. Zheng, Y. Cheng, F. Bao, and Y.-s. Wang, 'Synthesis and magnetic properties of Fe3O4 nanoparticles,' Materials Research Bulletin, vol. 41, no. 3, pp. 525-529, 2006. [61] J. Wang, Q. Chen, C. Zeng, and B. Hou, 'Magnetic‐field‐induced growth of single‐crystalline Fe3O4 nanowires,' Advanced Materials, vol. 16, no. 2, pp. 137-140, 2004. [62] R. Vijayakumar, Y. Koltypin, I. Felner, and A. Gedanken, 'Sonochemical synthesis and characterization of pure nanometer-sized Fe3O4 particles,' Materials Science and Engineering: A, vol. 286, no. 1, pp. 101-105, 2000. [63] A. Aharoni and J. Jakubovics, 'Cylindrical domains in small ferromagnetic spheres with cubic anisotropy,' IEEE Transactions on Magnetics, vol. 24, no. 2, pp. 1892-1894, 1988. [64] G. Korneva et al., 'Carbon nanotubes loaded with magnetic particles,' Nano letters, vol. 5, no. 5, pp. 879-884, 2005. [65] A. Vyalikh et al., 'A carbon-wrapped nanoscaled thermometer for temperature control in biological environments,' 2008. [66] T. Mühl et al., 'Magnetic properties of aligned Fe-filled carbon nanotubes,' Journal of Applied Physics, vol. 93, no. 10, pp. 7894-7896, 2003. [67] K. Lipert, M. Ritschel, A. Leonhardt, Y. Krupskaya, B. Büchner, and R. Klingeler, 'Magnetic properties of carbon nanotubes with and without catalyst,' in J Phys Conf Ser, 2010, vol. 200, no. 072061, pp. 1-4. [68] Brilliant.org. (1/14). Magnetic Field Lines. Available: https://brilliant.org/wiki/magnetic-field-lines/?fbclid=IwAR0VmdsjQI_gSffNoOiz9WB5HhikA33sTToN9DJtXknWkS2S1y790SWacTM [69] B. D. Cullity and C. D. Graham, Introduction to magnetic materials. John Wiley Sons, 2011. [70] K. Yamaguchi, K. Matsumoto, and T. Fujii, 'Magnetic anisotropy by ferromagnetic particles alignment in a magnetic field,' Journal of applied physics, vol. 67, no. 9, pp. 4493-4495, 1990. [71] Y. Liu, W. Jiang, S. Li, and F. Li, 'Electrostatic self-assembly of Fe3O4 nanoparticles on carbon nanotubes,' Applied Surface Science, vol. 255, no. 18, pp. 7999-8002, 2009. [72] toppr. (2/3). The Bar Magnet. Available: https://www.toppr.com/guides/physics/magnetism-and-matter/the-bar-magnet/?fbclid=IwAR0pagU6Qqr8Qc9UtuamiZo8ZNXt9f3i0z08so6qCf9BT07-rsrULJ1xy_U | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51109 | - |
| dc.description.abstract | 奈米碳管具備優異的機械及電學性質因此被廣泛地運用在複合材料中，由於奈米碳管為非對稱性材料，能控制其在複合材料中的方向及排列可使複合材料性質受到控制。目前控制奈米碳管排列的方式主要有電場及磁場的方式，電場排列的方式由於需要使用高電壓，在製作上的難度及危險性較高；磁場排列的方式則需要對奈米碳管進行預處理才可進行排列。在本研究中，利用混合磁性顆粒至多壁奈米碳管/PDMS混合物中，讓奈米碳管能在磁場下被排列。 在本研究中，混合了不同奈米碳管及四氧化三鐵比例的水溶液，測試其受磁鐵吸引的速率，觀察到奈米碳管受磁鐵吸引的速率會隨著磁性顆粒添加量增加而上升。由於前述的觀察，本研究使用添加四氧化三鐵的方式來製作壓敏材料，藉此達到控制壓敏材料中奈米碳管排列之方式。 在製作壓敏材料的過程中，施加磁場能在壓敏材料中形成長條狀結構，實驗中分析了不同多壁奈米碳管、四氧化三鐵添加比例對結構的影響，觀察到長條狀結構隨著四氧化三鐵添加量的增加，形成的速率有顯著地提升。接著，對製作完成的壓敏材料進行了各種測試，發現長條狀的結構能提高壓敏材料的導電性，並觀察到導電各向異性；材料的滲透閾值從1.3wt%多壁奈米碳管添加量降低到1.2wt%。在對感測器壓阻性質及應力應變性質的量測中，發現電阻值因奈米碳管的排列結構而降低，彈性模數則是因為孔洞結構而降低。最後，量測了四氧化三鐵的粒徑大小及奈米碳管的磁性，發現兩種材料皆為具鐵磁性的材料，四氧化三鐵的飽和磁化量比奈米碳管的飽和磁化量高出約兩個數量級。 針對實驗中所觀察到的現象，本研究解釋了多壁奈米碳管/四氧化三鐵/PDMS混合物在磁場下排列的現象，在磁場下被磁化的磁性顆粒會產生局部磁場彼此吸引聚集，並吸附於奈米碳管上殘留的磁性顆粒，因此奈米碳管的磁性提升，能隨著磁場排列成長條狀結構。 | zh_TW |
| dc.description.abstract | Carbon nanotubes are widely used in composite materials due to their excellent mechanical and electrical properties. Because carbon nanotubes are asymmetrical materials, the ability to control their direction and alignment in the composite material may control the properties of the composite material. Nowadays, methods of controlling the alignment of carbon nanotubes mainly include applying an electric field and applying a magnetic field. The method of applying the electric field requires the use of high voltage, which is difficult and dangerous to implement; Method of applying magnetic field requires the use of pretreated carbon nanotubes. In this study, the effect of adding magnetic particles in the carbon nanotube/PDMS mixture is studied. In this study, water solutions with different ratios of carbon nanotubes and ferrosoferric oxide particles are mixed and the rate of aggregation of carbon nanotubes and ferrosoferric oxide particles by the magnet is measured. The rate of aggregation of carbon nanotubes and ferrosoferric oxide particles by the magnet increases with the increase in the number of magnetic particles added. After showing the interaction between carbon nanotubes and ferrosoferric oxide particles, adding ferrosoferric oxide particles is used to prepare pressure-sensitive material, and to control the alignment of carbon nanotubes in pressure-sensitive materials. In the process of preparing the pressure-sensitive material, long structures form in the pressure-sensitive material due to additional ferrosoferric oxide particles. In the experiment, the influence of different multi-wall carbon nanotubes to ferrosoferric oxide particles ratios on the structures are analyzed. With the increase of ferrosoferric oxide particles addition, the rate of formation of long strip structures increases. It is found that the long strip structures can improve the conductivity of the pressure-sensitive material and conductivity anisotropy; The percolation threshold of the material is reduced from 1.3wt% multi-walled carbon nanotubes addition to 1.2wt%. In the measurement of the piezoresistive properties and stress-strain properties of the sensor, it is found that the resistance is reduced due to the alignment of carbon nanotubes, and the elastic modulus is reduced due to the hole structures. Finally, the particle size of ferrosoferric oxide particles and the magnetism of carbon nanotubes are measured, and it is found that both materials are ferromagnetic. The saturation magnetization of ferrosoferric oxide particles is higher than that of carbon nanotubes about two orders of magnitude. Finally, the possible mechanisms for the observed phenomenon are discussed. Magnetic particles magnetize under the magnetic field and generate a local magnetic field, so magnetic particles absorb the remaining magnetic particles on the carbon nanotubes. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-15T13:25:21Z (GMT). No. of bitstreams: 1 U0001-0502202116222500.pdf: 5238541 bytes, checksum: ef8ddbb4115650361fefadc5bf027d75 (MD5) Previous issue date: 2021 | en |
| dc.description.tableofcontents | 口試委員會審訂書........................................................................................................# 致謝.................................................................................................................................ⅰ 摘要…………………………………………………………...………………….…....ⅱ Abstract……………………………………………………………….........................ⅲ 目錄……………...……………………………………………………………….……ⅴ 圖目錄…………………………………………..………………………..……….....ⅷ 表目錄…………………………………….………………………………................ⅻ 第1章 緒論 1 1.1 前言 1 1.2 柔性感測器 2 1.3 文獻回顧 4 1.3.1 逾滲閾值(Percolation threshold) 4 1.3.2 降低逾滲閾值方式 9 1.3.3 多孔結構 11 1.4 研究動機 15 第2章 實驗原料與設備 16 2.1 實驗原料 16 2.1.1 多壁奈米碳管 16 2.1.2 四氧化三鐵 17 2.1.3 糖 17 2.1.4 聚二甲基矽氧烷 18 2.1.5 正己烷 18 2.1.6 導電銀膠 18 2.2 實驗設備 20 2.2.1 強力磁鐵 20 2.2.2 鐵氟龍膜 20 2.2.3 壓克力板模具 20 2.2.4 儀器表 21 第3章 材料製備與實驗方式 22 3.1 壓敏感測器製備流程 22 3.2 實驗方式 26 3.2.1 電阻隨應變量測 26 3.2.2 應力應變量測 27 3.2.3 觀測磁場排列PDMS中Fe3O4/CNT之過程 27 第4章 實驗結果與討論 29 4.1 磁力吸引下奈米碳管被吸引之速率比較 29 4.2 光學顯微鏡觀測排列過程 33 4.2.1 磁場排列溶質過程 33 4.2.2 移除磁場後CNT及Fe3O4的排列 39 4.2.3 Align V.S. Nonalign無孔複合材料 41 4.3 孔洞樣貌及孔隙率 42 4.4 改變原料添加比例 44 4.4.1 改變Fe3O4添加比例 44 4.4.2 滲透閾值(Percolation threshold)比較 46 4.5 應變過程中電阻及應變之變化 48 4.5.1 Align V.S. Nonalign壓阻過程比較 48 4.5.2 Align V.S. Nonalign應力應變過程比較 51 4.6 各向異性材料 54 4.7 原料性質量測 55 4.7.1 Fe3O4粒徑大小 55 4.7.2 CNT磁性 58 4.8 磁場排列過程探討 61 第5章 總結與未來展望 64 REFERENCE 65 | |
| dc.language.iso | zh-TW | |
| dc.subject | 奈米碳管 | zh_TW |
| dc.subject | 磁性顆粒 | zh_TW |
| dc.subject | 壓敏感測器 | zh_TW |
| dc.subject | 應變感測器 | zh_TW |
| dc.subject | 複合材料 | zh_TW |
| dc.subject | 奈米碳管 | zh_TW |
| dc.subject | 磁性顆粒 | zh_TW |
| dc.subject | 壓敏感測器 | zh_TW |
| dc.subject | 應變感測器 | zh_TW |
| dc.subject | 複合材料 | zh_TW |
| dc.subject | magnetic particle | en |
| dc.subject | strain sensor | en |
| dc.subject | carbon nanotube | en |
| dc.subject | magnetic particle | en |
| dc.subject | pressure sensor | en |
| dc.subject | strain sensor | en |
| dc.subject | composite | en |
| dc.subject | pressure sensor | en |
| dc.subject | carbon nanotube | en |
| dc.subject | composite | en |
| dc.title | 奈米碳管/磁性顆粒/PDMS複合材料內部結構及壓敏性質 | zh_TW |
| dc.title | The relation between internal structures and pressure-sensitive properties of carbon nanotube/magnetic particles/PDMS composite | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 109-1 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 李雨(U Lei),黃仲仁(Jung-Ren Huang) | |
| dc.subject.keyword | 奈米碳管,磁性顆粒,壓敏感測器,應變感測器,複合材料, | zh_TW |
| dc.subject.keyword | carbon nanotube,magnetic particle,pressure sensor,strain sensor,composite, | en |
| dc.relation.page | 70 | |
| dc.identifier.doi | 10.6342/NTU202100601 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2021-02-08 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 應用力學研究所 | zh_TW |
| 顯示於系所單位： | 應用力學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| U0001-0502202116222500.pdf 未授權公開取用 | 5.12 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。