請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/50851完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 陳耀銘 | |
| dc.contributor.author | Yang-Lin Chen | en |
| dc.contributor.author | 陳揚霖 | zh_TW |
| dc.date.accessioned | 2021-06-15T13:02:15Z | - |
| dc.date.available | 2016-07-25 | |
| dc.date.copyright | 2016-07-25 | |
| dc.date.issued | 2016 | |
| dc.date.submitted | 2016-07-09 | |
| dc.identifier.citation | [1] M. M. Jovanović and Y. Jang, 'State-of-the-art, single-phase, active power-factor-correction techniques for high-power applications an overview,' IEEE Transactions on Industrial Electronics, vol. 52, no. 3, pp. 701-708, Jun. 2005.
[2] G. Chu, C.K. Tse, S.C. Wong, and S.-C. Tan, 'A Unified Approach for the Derivation of Robust Control for Boost PFC Converters,' IEEE Transactions on Power Electronics, vol. 24, no. 11, pp. 2531-2544, Nov. 2009. [3] F. Musavi, M. Edington, W. Eberle, and W.G. Dunford, 'Control Loop Design for a PFC Boost Converter With Ripple Steering,' IEEE Transactions on Industry Applications, vol. 49, no. 1, pp. 118-126, Jan.-Feb. 2013. [4] F. Zhang and J. Xu, 'A Novel PCCM Boost PFC Converter With Fast Dynamic Response,' IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 4207-4216, Sept. 2011. [5] P. Das, M. Pahlevaninezhad, J. Drobnik, G. Moschopoulos, and P.K. Jain, 'A Nonlinear Controller Based on a Discrete Energy Function for an AC/DC Boost PFC Converter,' IEEE Transactions on Power Electronics, vol. 28, no. 12, pp. 5458-5476, Dec. 2013. [6] C. Zhang, 'A PFC with high power factor at low load or high mains voltage,' IEEE APEC 2011, pp. 56-59. [7] D.Y. Qiu, S.C. Yip, H.S.H. Chung, and S.Y.R. Hui, 'Single current sensor control for single-phase active power factor correction,' IEEE Transactions on Power Electronics, vol. 17, no. 5, pp. 623-632, Sept. 2002. [8] D. Maksimovic, Y. Jang, and R.W. Erickson, 'Nonlinear-carrier control for high-power-factor boost rectifiers,' IEEE Transactions on Power Electronics, vol. 11, no. 4, pp. 578-584, July 1996. [9] S. Chattopadhyay, V. Ramanarayanan, and V. Jayashankar, 'A predictive switching modulator for current mode control of high power factor boost rectifier,' IEEE Transactions on Power Electronics, vol. 18, no. 1, pp. 114-123, Jan 2003. [10] Q. Li, F.C. Lee, M. Xu, and C. Wang, 'Light load efficiency improvement for PFC,' IEEE ECCE 2009, pp. 3755-3760. [11] F.-Z. Chen and D. Maksimović, 'Digital Control for Improved Efficiency and Reduced Harmonic Distortion Over Wide Load Range in Boost PFC Rectifiers,' IEEE Transactions on Power Electronics, vol. 25, no. 10, pp. 2683-2692, Oct. 2010. [12] C.L. Sirio, 'Analysis of Line Current Harmonics for Single-Phase PFC Converters,' IEEE PESC 2007, pp. 1291-1297. [13] M. Chen and S. Jian, 'Feedforward current control of boost single-phase PFC converters,' IEEE Transactions on Power Electronics, vol. 21, no. 2, pp. 338-345, Mar. 2006. [14] J.-S. Lai, D. Hurst, and T. Key, 'Switch-mode supply power factor improvement via harmonic elimination methods,' IEEE APEC 1991, pp.415-422. [15] S. Jian, 'On the zero-crossing distortion in single-phase PFC converters,' IEEE Transactions on Power Electronics, vol. 19, no. 3, pp. 685-692, May 2004. [16] X. Qu and X. Ruan, 'A Scheme for Improving Input Current Zero-Crossing Distortion of Single-Phase Power-Factor-Correction Converters,' IEEE PESC 2006, pp.1-6. [17] K. De Gusseme, V. de Sype, M. David, A.P.M. V. den Bossche, and J.A. Melkebeek, 'Input-Current Distortion of CCM Boost PFC Converters Operated in DCM,' IEEE Transactions on Industrial Electronics, vol. 54, no. 2, pp. 858-865, Apr. 2007. [18] J. Rajagopalan, F.C. Lee, and P. Nora, 'A general technique for derivation of average current mode control laws for single-phase power-factor-correction circuits without input voltage sensing,' IEEE Transactions on Power Electronics, vol. 14, no. 4, pp. 663-672, July 1999. [19] Q. Ji, X. Ruan, L. Xie, and Z. Ye, 'Conducted EMI Spectra of Average-Current-Controlled Boost PFC Converters Operating in Both CCM and DCM,' IEEE Transactions on Industrial Electronics, vol. 62, no. 4, pp. 2184-2194, Apr. 2015. [20] Z.Z. Ye and M.M. Jovanović, 'Implementation and performance evaluation of DSP-based control for constant-frequency discontinuous-conduction-mode boost PFC front end,' IEEE Transactions on Industrial Electronics, vol. 52, no. 1, pp. 98-107, Feb. 2005. [21] K.-H. Liu and Y.-L. Lin, 'Current waveform distortion in power factor correction circuits employing discontinuous-mode boost converters,' IEEE PESC 1989, pp.825-829. [22] B. Choi, S.-S. Hong, and H. Park, 'Modeling and small-signal analysis of controlled on-time boost power-factor-correction circuit,' IEEE Transactions on Industrial Electronics, vol. 48, no. 1, pp. 136-142, Feb. 2001. [23] Y.-K. Lo, J.-Y. Lin, and S.-Y. Ou, 'Switching-Frequency Control for Regulated Discontinuous-Conduction-Mode Boost Rectifiers,' IEEE Transactions on Industrial Electronics, vol. 54, no. 2, pp. 760-768, April 2007. [24] M. Gotfryd, 'Limits in boost power factor corrector operating in border-line mode,' IEEE Transactions on Power Electronics, vol. 18, no. 6, pp. 1330-1335, Nov. 2003. [25] J. Zhang, J. Shao, P. Xu, F.C. Lee, and M.M. Jovanović, 'Evaluation of input current in the critical mode boost PFC converter for distributed power systems,' IEEE APEC 2001, pp. 130-136. [26] J.-S. Lai and D. Chen, 'Design consideration for power factor correction boost converter operating at the boundary of continuous conduction mode and discontinuous conduction mode,' IEEE APEC 1993, pp. 267-273. [27] C.-H. Hung, and Y.-Y. Tzou, 'MathCAD design of critical conduction mode PFC converters,' IEEE IPEMC 2009, pp. 1684-1688. [28] A. Abramovitz, 'Effect of the Ripple Current on Power Factor of CRM Boost APFC,' IEEE IPEMC 2006, pp. 1-4. [29] J. Lazar and S. Cuk, 'Open loop control of a unity power factor, discontinuous conduction mode boost rectifier,' INTELEC 1995, pp. 671-677. [30] J. Lazar and S. Cuk, 'Feedback loop analysis for AC/DC rectifiers operating in discontinuous conduction mode,' IEEE APEC 1996, pp. 797-806. [31] K. Yao, W. Hu, Q. Li, and J. Lyu, 'A Novel Control Scheme of DCM Boost PFC Converter,' IEEE Transactions on Power Electronics , vol. 30, no. 10, pp. 5605-5615, Oct. 2015. [32] S. F. Lim and A.M. Khambadkone, 'A Simple Digital DCM Control Scheme for Boost PFC Operating in Both CCM and DCM,' IEEE Transactions on Industry Applications, vol. 47, no. 4, pp. 1802-1812, July-Aug. 2011. [33] L. Huber, B.T. Irving, M.M. Jovanović, 'Effect of Valley Switching and Switching-Frequency Limitation on Line-Current Distortions of DCM/CCM Boundary Boost PFC Converters,' IEEE Transactions on Power Electronics , vol. 24, no. 2, pp. 339-347, Feb. 2009. [34] Z. Lai, K.M. Smedley, and Y. Ma, 'Time quantity one-cycle control for power-factor correctors,' IEEE Transactions on Power Electronics, vol. 12, no. 2, pp. 369-375, Mar. 1997. [35] K. Yao, X. Ruan, X. Mao, and Z. Ye, 'Variable-Duty-Cycle Control to Achieve High Input Power Factor for DCM Boost PFC Converter,' IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1856-1865, May 2011. [36] C.-P. Ku, D. Chen, and S.-H. Lin, 'A new control scheme for boost PFC converters for both CCM and DCM operations,' IEEE ECCE 2011, pp. 1334-1338. [37] J.W. Kim, S.M. Choi, and K.T. Kim, 'Variable On-time Control of the Critical Conduction Mode Boost Power Factor Correction Converter to Improve Zero-crossing Distortion,' International Conference on PEDS 2005, pp. 1542-1546. [38] J.-C. Tsai, C.-L. Chen, Y.-T. Chen, C.-L. Ni, C.-Y. Chen and K.-H. Chen, 'Perturbation On-Time (POT) Technique in Power Factor Correction (PFC) Controller for Low Total Harmonic Distortion and High Power Factor,' IEEE Transactions on Power Electronics, vol. 28, no. 1, pp. 199-212, Jan. 2013. [39] A. Bianco, C. Adragna, and G. Scappatura, 'Enhanced constant-on-time control for DCM/CCM boundary boost PFC pre-regulators: Implementation and performance evaluation,' IEEE APEC 2014, pp. 69-75. [40] S.-H. Tang, D. Chen, C.-S. Huang, C.-Y. Liu, and K.H. Liu, 'A new on-time adjustment scheme for the reduction of input current distortion of critical-mode power factor correction boost converters,' IPEC 2010, pp. 1717-1724. [41] F.A. Huliehel, F.C. Lee, and B.H. Cho, 'Small-signal modeling of the single-phase boost high power factor converter with constant frequency control,' IEEE PESC 1992, pp. 475-482. [42] M. Kumar, L. Huber, and M.M. Jovanović, 'Startup Procedure for DSP-Controlled Three-Phase Six-Switch Boost PFC Rectifier,' IEEE Transactions on Power Electronics, vol. 30, no. 8, pp. 4514-4523, Aug. 2015. [43] J.-W. Shin, and B.-H. Cho, 'Digitally Implemented Average Current-Mode Control in Discontinuous Conduction Mode PFC Rectifier,' IEEE Transactions on Power Electronics, vol. 27, no. 7, pp. 3363-3373, July 2012. [44] K.I. Hwu, C.-L. Tsai, and K.-F. Lin, 'A simple passive ZCS circuit for PFC converter,' IEEE APEC 2008, pp. 1022-1026. [45] Z. Lu and T.C. Green, 'A study of soft-switched CCM boost AC/DC converter,' Seventh International Conference on Power Electronics and Variable Speed Drives 1998, pp. 662-667. [46] S. Yildirmaz and H. Bodur, 'A new ZVT snubber cell for PWM-CCM-PFC boost converters,' ECCE-Europe 2015, pp. 1-10. [47] Z. Ye, and B. Sun, 'PFC efficency improvement and THD reduction at light loads with ZVS and valley switching,' IEEE APEC 2012, pp. 802-806. [48] W.-C. Cheng and C.-L. Chen, 'A zero-current detection circuit with optimal ZVS/VS for boundary mode boost PFC converter,' IEEE ISIE 2012, pp. 137-142. [49] Electromagnetic Compatibility (EMC), International Standard IEC 61000-3-2, 2005. [50] D. Shmilovitz, 'On the definition of total harmonic distortion and its effect on measurement interpretation,' IEEE Transactions on Power Delivery, vol. 20, no. 1, pp. 526-528, Jan. 2005. [51] I.V. Blagouchine and E. Moreau, 'Analytic Method for the Computation of the Total Harmonic Distortion by the Cauchy Method of Residues,' IEEE Transactions on Communications, vol. 59, no. 9, pp. 2478-2491, Sept. 2011. [52] A.E. Emanuel, 'Powers in nonsinusoidal situations-a review of definitions and physical meaning,' IEEE Transactions on Power Delivery, vol. 5, no. 3, pp. 1377-1389, July 1990. [53] R. Arseneau, Y. Baghzouz, J. Belanger, A. Braun, M. Cox, A. Emanuel, et al., 'Practical definitions for powers in systems with nonsinusoidal waveforms and unbalanced loads: a discussion,' IEEE Transactions on Power Delivery, vol. 11, no. 1, pp. 79-101, Jan. 1996. [54] F. C. Schwarz, 'A Time-Domain Analysis of the Power Factor for a Rectifier Filter System with Over- and Subcritical Inductance,' IEEE Transactions on Industrial Electronics and Control Instrumentation, vol. IECI-20, no. 2, pp. 61-68, May 1973. [55] C. Zhang, 'A PFC with high power factor at low load or high mains voltage,' IEEE APEC 2011, pp. 56-59. [56] L. Rossetto, S. Buso, and G. Spiazzi, 'Conducted EMI issues in a boost PFC design,' Telecommunications Energy Conference 1998, pp. 188-195. [57] J. Muhlethaler, H. Uemura, and J.W. Kolar, 'Optimal design of EMI filters for single-phase boost PFC circuits,' IEEE IECON 2012, pp. 632-638. [58] F.-Y. Shih, D.-Y. Chen, Y.-P. Wu, and Y.-T. Chen, 'A procedure for designing EMI filters for AC line applications,' IEEE Transactions on Power Electronics, vol. 11, no. 1, pp. 170-181, Jan. 1996. [59] K. Raggl, T. Nussbaumer, and J.W. Kolar, 'Guideline for a Simplified Differential-Mode EMI Filter Design,' IEEE Transactions on Industrial Electronics, vol. 57, no. 3, pp. 1031-1040, Mar. 2010. [60] X. Lei and S. Jian, 'Optimal damping of multi-stage EMI filters,' IEEE APEC 2011, pp. 1721-1728. [61] R.W. Erickson, 'Optimal single resistors damping of input filters,' IEEE APEC 1999, pp. 1073-1079. [62] Y. Xing, L. Huang, X. Cai, and S. Sun, 'A combined front end DC/DC converter,' IEEE APEC 2003, pp. 1095-1099. [63] Yungtaek Jang, M.M. Jovanović, and D.L. Dillman, 'Hold-up time extension Circuit with integrated magnetics,' IEEE Transactions on Power Electronics, vol. 21, no. 2, pp. 394-400, Mar. 2006. [64] Transformer and Inductor Design Handbook, 4th ed., Colonel Wm. T. McLyman, 2011. [65] J. Liu, T.G. Wilson, R.C. Wong, R. Wunderlich, and F.C. Lee, 'A method for inductor core loss estimation in power factor correction applications,' IEEE APEC 2002, pp. 439-445. [66] dsPIC33FJ06GSX02 Data Sheet, Microchip, 2014. [67] T. Kerekes, R. Teodorescu, P. Rodriguez, G. Vazquez, and E. Aldabas, 'A New High-Efficiency Single-Phase Transformerless PV Inverter Topology,' IEEE Transactions on Industrial Electronics, vol. 58, no. 1, pp. 184-191, Jan. 2011. [68] Y. Jang and M.M. Jovanović, 'A Bridgeless PFC Boost Rectifier With Optimized Magnetic Utilization,' IEEE Transactions on Power Electronics, vol. 24, no. 1, pp. 85-93, Jan. 2009. [69] L. Huber, Y. Jang, and M.M. Jovanović, 'Performance Evaluation of Bridgeless PFC Boost Rectifiers,' IEEE Transactions on Power Electronics, vol. 23, no. 3, pp. 1381-1390, May 2008. [70] B. Su, J. Zhang, and Z. Lu, 'Totem-Pole Boost Bridgeless PFC Rectifier With Simple Zero-Current Detection and Full-Range ZVS Operating at the Boundary of DCM/CCM,' IEEE Transactions on Power Electronics, vol. 26, no. 2, pp. 427-435, Feb. 2011. [71] E. Firmansyah, S. Abe, M. Shoyama, S. Tomioka, and T. Ninomiya, 'A critical-conduction-mode bridgeless interleaved boost power factor correction: Its control scheme based on commonly available controller,' International Conference on PEDS 2009, pp. 109-114. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/50851 | - |
| dc.description.abstract | 本篇論文提出一種應用於具有零電流切換（zero current switching, ZCS）/零電壓切換（zero voltage switching, ZVS）/谷底切換（valley switching, VS）/切換頻率限制（switching frequency limitation, SFL）等功能之不連續導通模式/臨界導通模式升壓型功率因數校正器的失真線電流補償方法。此補償方法結合了傳統的變導通時間（variable on-time, VOT）控制以及平均電流（average current mode, ACM）控制以用於補償嚴重的輸入電流失真現象。另一方面，於本篇論文中，對於因零電流切換/零電壓切換/谷底切換/切換頻率限制等功能，以及市電端EMI濾波器所造成之線電流失真原因也具有詳盡的數學分析與解釋。一般而言，為了提升電源轉換器的效率，零電壓切換/谷底切換與切換頻率限制是必要的功能，但這些功能會使線電流失真更為嚴重。為了補償失真的電流，本篇論文提出一種基於平均電流控制之變導通時間（ACM-based VOT, ABVOT）控制方法。此外，一種基於定導通時間（constant on-time, COT）控制的取樣保持（sample and hold, S/H）方法也在本篇論文中提出，以取代傳統平均電流控制所需要的乘法器。另外，應用本論文所提方法的不連續導通模式/臨界導通模式升壓型功率因數校正器，其小訊號模型亦會被詳盡的分析以用來設計控制迴路的補償器。最後，透過電腦模擬與實作驗證本篇論文提出之方法的可行性及其性能。 | zh_TW |
| dc.description.abstract | A line current distortion compensation method is proposed in this dissertation for DCM/CRM boost PFC converter. This circuit features variable on-time (VOT) control, average current mode (ACM) control, and zero current switching (ZCS)/ zero voltage switching (ZVS)/ valley switching (VS)/ switching frequency limitation (SFL) functions. In order to increase efficiency, the ZVS/VS/SFL functions are usually needed, but in doing so, the line current is usually further distorted. In this dissertation, the mathematical analyses of the line current distortion caused by the DCM/CRM boost PFC converter with ZCS/ZVS/VS/SFL functions and the EMI filter are also conducted to account for the line current distortion. From the results of analyses, the ACM-based VOT (ABVOT) control for the DCM/CRM boost PFC converter is proposed. In addition, the noise-immunity sample-and-hold (S/H) approach of COT-based controller is proposed to replace the expensive multiplier which is usually needed for the conventional ACM-based control. The small signal model of the proposed circuit is also developed for the purpose of compensator design. The validity and the performances of the proposed ABVOT control with S/H approach is demonstrated by simulations and experimental results. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-15T13:02:15Z (GMT). No. of bitstreams: 1 ntu-105-F99921021-1.pdf: 9730740 bytes, checksum: fbbc5e3eacbc4ec4ffb5551ad6536999 (MD5) Previous issue date: 2016 | en |
| dc.description.tableofcontents | 口試委員審定書 I
誌謝 II 摘要 III Abstract IV Contents VI Contents of Figures X Contents of Tables XIX Abbreviation XX Chapter 1. Introduction 1 1.1. Background and Motivation 1 1.2. Objective 2 1.3. Organization 3 Chapter 2. Literature Survey 4 2.1. The Family of Boost PFC Converter 4 2.1.1. CCM Boost PFC Converter 6 2.1.2. DCM Boost PFC Converter 9 2.1.3. CRM Boost PFC Converter 11 2.2. The Definitions of THD and PF 14 2.3. Review of Input Current Distortion Compensation Method 16 Chapter 3. Analyses of Line Current Distortion 19 3.1. The Effects of L and Cds 19 3.1.1. ZCS function 20 3.1.2. ZVS/VS functions 27 3.1.3. SFL function 30 3.2. The Effect of Input EMI Filter 33 Chapter 4. Proposed Compensation Method 36 4.1. The ABVOT Control 36 4.2. The Sample-and-Hold (S/H) Approach 39 Chapter 5. Simulation and Hardware Implementation 47 5.1. Parameters Design 48 5.1.1. Design of L and Cds 48 5.1.2. Design of Lf and Cf 50 5.2. Simulation 51 5.3. Small Signal Analyses and Compensator Design 61 5.3.1. Inner Loop (Current Loop) 61 5.3.2. Outer Loop (Voltage Loop) 69 5.4. Hardware Implementation 73 5.4.1. Diode 73 5.4.2. MOSFET 75 5.4.3. Inductor 78 5.4.4. Control ICs and Sensors 82 Chapter 6. Simulated and Experimental Results 89 6.1. Simulated Results 89 6.1.1. ZVS/VS and SFL Functions 89 6.1.2. Input Current 90 6.2. Experimental Results 100 6.2.1. ZVS/VS and SFL Functions 102 6.2.2. Proposed S/H Appropach 104 6.2.3. Steady State Performance 106 6.2.4. Discussion 121 Chapter 7. Conclusion and Suggested Future Works 124 7.1. Conclusion 124 7.2. Suggested Future Works 125 References 127 Appendix 138 A1. Small Signal Analyses of DCM Boost PFC Converter 138 A2. Magnetic Core Selection 142 | |
| dc.language.iso | en | |
| dc.title | 不連續/臨界導通模式升壓型功因校正器之線電流失真補償辦法 | zh_TW |
| dc.title | Line Current Distortion Compensation Method for DCM/CRM Boost PFC Converters | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 104-2 | |
| dc.description.degree | 博士 | |
| dc.contributor.oralexamcommittee | 潘晴財,陳德玉,陳建富,賴炎生,林志毅 | |
| dc.subject.keyword | 功率因數校正,升壓型電源轉換器,平均電流控制,定導通時間,變導通時間,取樣保持方法,無乘法器, | zh_TW |
| dc.subject.keyword | power factor correction (PFC),boost converter,average current mode (ACM),constant on-time (COT),variable on-time (VOT),sample-and-hold (S/H),multiplierless, | en |
| dc.relation.page | 146 | |
| dc.identifier.doi | 10.6342/NTU201600770 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2016-07-11 | |
| dc.contributor.author-college | 電機資訊學院 | zh_TW |
| dc.contributor.author-dept | 電機工程學研究所 | zh_TW |
| 顯示於系所單位： | 電機工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-105-1.pdf 目前未授權公開取用 | 9.5 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。