請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49887
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人(Jer-Ren Yang) | |
dc.contributor.author | Yo-Ming Pua | en |
dc.contributor.author | 潘有銘 | zh_TW |
dc.date.accessioned | 2021-06-15T12:25:45Z | - |
dc.date.available | 2021-02-20 | |
dc.date.copyright | 2021-02-20 | |
dc.date.issued | 2021 | |
dc.date.submitted | 2021-02-06 | |
dc.identifier.citation | [1] G.E. Totten, D.S. MacKenzie, Handbook of aluminum: vol. 1: physical metallurgy and processes, CRC press (2003). [2] I. Polmear, Physical metallurgy of aluminium alloys, Light alloys (2005) 29-96. [3] S. Ringer, K. Hono, Microstructural evolution and age hardening in aluminium alloys: atom probe field-ion microscopy and transmission electron microscopy studies, Materials characterization 44(1-2) (2000) 101-131. [4] R.J. Hussey, J. Wilson, Light Alloys: Directory and Databook, Springer Science Business Media (2013). [5] J.-F. Nie, Physical metallurgy of light alloys, Physical metallurgy, Elsevier2014, pp. 2009-2156. [6] I.J. Polmear, Recent Developments in Light Alloys, Materials Transactions, JIM 37(1) (1996) 12-31. [7] E.A. Starke Jr, J.T. Staley, Application of modern aluminum alloys to aircraft, Progress in aerospace sciences 32(2-3) (1996) 131-172. [8] T. Dursun, C. Soutis, Recent developments in advanced aircraft aluminium alloys, Materials Design (1980-2015) 56 (2014) 862-871. [9] A. Warren, Developments and challenges for aluminum--A boeing perspective, Materials Forum, 2004, pp. 24-31. [10] I. Polmear, Aluminium Alloys--A Century of Age Hardening, Materials forum, 2004, p. 13. [11] A. Association, Aluminum: properties and physical metallurgy, ASM international1984. [12] E.L. Rooy, Introduction to aluminum and aluminum alloys, ASM International, Metals Handbook, Tenth Edition. 2 (1990) 3-14. [13] B. Wei, C. Chen, Z. Huang, Y. Zhang, Aging behavior of Li containing Al–Zn–Mg–Cu alloys, Materials Science and Engineering: A 280(1) (2000) 161-167. [14] S. Fang, M. Wang, M. Song, An approach for the aging process optimization of Al–Zn–Mg–Cu series alloys, Materials Design 30(7) (2009) 2460-2467. [15] X. Li, B. Xiong, Y. Zhang, C. Hua, F. Wang, B. Zhu, H. Liu, Effect of one-step aging on microstructure and properties of a novel Al-Zn-Mg-Cu-Zr alloy, Science in China Series E: Technological Sciences 52(1) (2009) 67-71. [16] G. Silva, B. Rivolta, R. Gerosa, U. Derudi, Study of the SCC behavior of 7075 aluminum alloy after one-step aging at 163 C, Journal of materials engineering and performance 22(1) (2013) 210-214. [17] R.-X. Yang, Z.-Y. Liu, P.-Y. Ying, J.-L. Li, L.-H. Lin, S.-M. Zeng, Multistage-aging process effect on formation of GP zones and mechanical properties in Al–Zn–Mg–Cu alloy, Transactions of Nonferrous Metals Society of China 26(5) (2016) 1183-1190. [18] A. Azarniya, A.K. Taheri, K.K. Taheri, Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective, Journal of Alloys and Compounds 781 (2019) 945-983. [19] Y. Fan, X. Tang, S. Wang, B. Chen, Comparisons of Age Hardening and Precipitation Behavior in 7075 Alloy Under Single and Double-Stage Aging Treatments, Metals and Materials International (2020) 1-12. [20] J.T. Staley, S. Byrne, E. Colvin, K. Kinnear, Corrosion and stress-corrosion of 7XXX-W products, Materials Science Forum, Trans Tech Publ, 1996, pp. 1587-1592. [21] M. Puiggali, A. Zielinski, J. Olive, E. Renauld, D. Desjardins, M. Cid, Effect of microstructure on stress corrosion cracking of an Al-Zn-Mg-Cu alloy, Corrosion Science 40(4-5) (1998) 805-819. [22] T. Marlaud, B. Baroux, A. Deschamps, J. Chemin, C. Hénon, Understanding the compromise between strength and exfoliation corrosion in high strength 7000 alloys, Materials science forum, Trans Tech Publ, 2006, pp. 455-460. [23] B. Cina, Reducing the susceptibility of alloys, particularly aluminium alloys, to stress corrosion cracking, Google Patents, 1974. [24] J.K. Park, Influence of retrogression and reaging treatments on the strength and stress corrosion resistance of aluminium alloy 7075-T6, Materials Science and Engineering: A 103(2) (1988) 223-231. [25] M. Kanno, I. Araki, Q. Cui, Precipitation behaviour of 7000 alloys during retrogression and reaging treatment, Materials Science and Technology 10(7) (1994) 599-603. [26] R. Bucci, C. Warren, E. Starke Jr, Need for new materials in aging aircraft structures, Journal of Aircraft 37(1) (2000) 122-129. [27] J. Li, N. Birbilis, C. Li, Z. Jia, B. Cai, Z. Zheng, Influence of retrogression temperature and time on the mechanical properties and exfoliation corrosion behavior of aluminium alloy AA7150, Materials Characterization 60(11) (2009) 1334-1341. [28] N.C. Danh, K. Rajan, W. Wallace, A TEM study of microstructural changes during retrogression and reaging in 7075 aluminum, Metallurgical Transactions A 14(9) (1983) 1843-1850. [29] J.K. Park, A. Ardell, Effect of retrogression and reaging treatments on the microstructure of Ai-7075-T651, Metallurgical and Materials Transactions A 15(8) (1984) 1531-1543. [30] F. Viana, A. Pinto, H. Santos, A. Lopes, Retrogression and re-ageing of 7075 aluminium alloy: microstructural characterization, Journal of Materials Processing Technology 92 (1999) 54-59. [31] X. Jiang, J. Tafto, B. Noble, B. Holme, Differential scanning calorimetry and electron diffraction investigation on low-temperature aging in Al-Zn-Mg alloys, Metallurgical and Materials Transactions A 31(2) (2000) 339-348. [32] T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre, B. Baroux, Evolution of precipitate microstructures during the retrogression and re-ageing heat treatment of an Al–Zn–Mg–Cu alloy, Acta materialia 58(14) (2010) 4814-4826. [33] J.R. Davis, Aluminum and aluminum alloys, ASM international1993. [34] G. Sha, A. Cerezo, Kinetic Monte Carlo simulation of clustering in an Al–Zn–Mg–Cu alloy (7050), Acta materialia 53(4) (2005) 907-917. [35] Y.-L. Wu, C. Li, F.S. Froes, A. Alvarez, Microalloying of Sc, Ni, and Ce in an advanced Al-Zn-Mg-Cu alloy, Metallurgical and materials Transactions A 30(4) (1999) 1017-1024. [36] L. Berg, J. Gjønnes, V.x. Hansen, X. Li, M. Knutson-Wedel, D. Schryvers, L. Wallenberg, GP-zones in Al–Zn–Mg alloys and their role in artificial aging, Acta materialia 49(17) (2001) 3443-3451. [37] V. Hansen, J. Gjønnes, S. Skjervold, Effect of predeformation and preaging at room temperature in Al–Zn–Mg–(Cu, Zr) alloys, Materials Science and Engineering: A 303(1-2) (2001) 226-233. [38] H. Löffler, I. Kovacs, J. Lendvai, Decomposition processes in Al-Zn-Mg alloys, Journal of Materials Science 18(8) (1983) 2215-2240. [39] T.-F. Chung, Y.-L. Yang, M. Shiojiri, C.-N. Hsiao, W.-C. Li, C.-S. Tsao, Z. Shi, J. Lin, J.-R. Yang, An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy, Acta Materialia 174 (2019) 351-368. [40] T.-F. Chung, Y.-L. Yang, B.-M. Huang, Z. Shi, J. Lin, T. Ohmura, J.-R. Yang, Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy, Acta Materialia 149 (2018) 377-387. [41] A. Guinier, Structure of age-hardened aluminium-copper alloys, Nature 142(3595) (1938) 569-570. [42] G. Preston, The diffraction of X-rays by age-hardening aluminium copper alloys, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences (1938) 526-538. [43] A. Kverneland, V. Hansen, G. Thorkildsen, H. Larsen, P. Pattison, X. Li, J. Gjønnes, Transformations and structures in the Al–Zn–Mg alloy system: A diffraction study using synchrotron radiation and electron precession, Materials Science and Engineering: A 528(3) (2011) 880-887. [44] G. Sha, A. Cerezo, Early-stage precipitation in Al–Zn–Mg–Cu alloy (7050), Acta Materialia 52(15) (2004) 4503-4516. [45] V. Gerold, * RONTGENOGRAPHISCHE UNTERSUCHUNGEN UBER DIE AUSHARTUNG EINER ALUMINIUM-KUPFER-LEGIERUNG MIT KLEINWINKEL-SCHWENKAUFNAHMEN, ZEITSCHRIFT FUR METALLKUNDE 45(10) (1954) 593-599. [46] K. Toman, The Structure of GP Zones. II. The Room Temperature Aging ofthe Aluminum-Copper Alloy, Acta cryst 10 (1957) 187. [47] T.-F. Chung, AA7050 (Al-Zn-Mg) 和 AA2050 (Al-Cu-Li) 鋁合金 原子級析出物之演化, 臺灣大學材料科學與工程學研究所學位論文 (2019) 1-239. [48] R. Nicholson, J. Nutting, Direct observation of the strain field produced by coherent precipitated particles in an age-hardened alloy, The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics 3(29) (1958) 531-535. [49] R. Rioja, D. Laughlin, The early stages of GP zone formation in naturally aged Ai-4 wt pct cu alloys, Metallurgical Transactions A 8(8) (1977) 1257-1261. [50] Y. Chang, Crystal Structure and Nucleation Behavior of {111} Precipitates in an Al-3.9 Cu-0.5 Mg-0.5 Ag Alloy, (1993). [51] J. Liu, R. Hu, J. Zheng, Y. Zhang, Z. Ding, W. Liu, Y. Zhu, G. Sha, Formation of solute nanostructures in an Al–Zn–Mg alloy during long-term natural aging, Journal of Alloys and Compounds 821 (2020) 153572. [52] L. Stemper, M.A. Tunes, P. Oberhauser, P.J. Uggowitzer, S. Pogatscher, Age-hardening response of AlMgZn alloys with Cu and Ag additions, Acta Materialia (2020). [53] K. Stiller, P. Warren, V. Hansen, J. Angenete, J. Gjønnes, Investigation of precipitation in an Al–Zn–Mg alloy after two-step ageing treatment at 100 and 150 C, Materials Science and Engineering: A 270(1) (1999) 55-63. [54] O. Blaschko, G. Ernst, P. Fratzl, M. Bernole, P. Auger, A neutron scattering investigation of the early stages of guinier-preston zone formation in AlZnMg (Cu)-alloys, Acta Metallurgica 30(2) (1982) 547-552. [55] M. Murakami, O. Kawano, Y. Murakami, The formation and reversion of guinier-preston zones in an aluminium-6.7 at.% zinc alloy and the effects of small concentrations of magnesium and silver, Acta Metallurgica 17(1) (1969) 29-40. [56] J. Buha, R. Lumley, A. Crosky, Secondary ageing in an aluminium alloy 7050, Materials Science and Engineering: A 492(1-2) (2008) 1-10. [57] P. Schloth, A. Deschamps, C.-A. Gandin, J.-M. Drezet, Modeling of GP (I) zone formation during quench in an industrial AA7449 75 mm thick plate, Materials Design 112 (2016) 46-57. [58] M. Radomsky, O. Kabisch, H. Löffler, J. Lendvai, T. Ungár, I. Kovács, G. Honyek, On the decomposition behaviour of Al-4.5 at% Zn-2 to 3 at% Mg alloys during continuous heating, Journal of Materials Science 14(12) (1979) 2906-2912. [59] H. Jiao, C. Li, The HREM study of precipitates in an Al− Zn− Mg alloy, Advanced Performance Materials 2(3) (1995) 305-309. [60] W. Yang, S. Ji, M. Wang, Z. Li, Precipitation behaviour of Al–Zn–Mg–Cu alloy and diffraction analysis from η' precipitates in four variants, Journal of alloys and compounds 610 (2014) 623-629. [61] Y.-Y. Li, L. Kovarik, P.J. Phillips, Y.-F. Hsu, W.-H. Wang, M.J. Mills, High-resolution characterization of the precipitation behavior of an Al–Zn–Mg–Cu alloy, Philosophical magazine letters 92(4) (2012) 166-178. [62] X. Xu, J. Zheng, Z. Li, R. Luo, B. Chen, Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: atomic-scale HAADF-STEM investigation, Materials Science and Engineering: A 691 (2017) 60-70. [63] X. Li, V. Hansen, J. Gjønnes, L. Wallenberg, HREM study and structure modeling of the η' phase, the hardening precipitates in commercial Al–Zn–Mg alloys, Acta materialia 47(9) (1999) 2651-2659. [64] J. Gjønnes, C.J. Simensen, An electron microscope investigation of the microstructure in an aluminium-zinc-magnesium alloy, Acta Metallurgica 18(8) (1970) 881-890. [65] A. Kverneland, V. Hansen, R. Vincent, K. Gjønnes, J. Gjønnes, Structure analysis of embedded nano-sized particles by precession electron diffraction. η'-precipitate in an Al–Zn–Mg alloy as example, Ultramicroscopy 106(6) (2006) 492-502. [66] C. Wolverton, Crystal structure and stability of complex precipitate phases in Al–Cu–Mg–(Si) and Al–Zn–Mg alloys, Acta Materialia 49(16) (2001) 3129-3142. [67] G. Sha, Y. Wang, X. Liao, Z. Duan, S. Ringer, T. Langdon, Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy, Acta Materialia 57(10) (2009) 3123-3132. [68] H. Degischer, W. Lacom, A. Zahra, C. Zahra, Decomposition Processes in an Al--5% Zn--1% Mg Alloy. II.--Electromicroscopic Investigation, Zeitschrift fur Metallkunde 71(4) (1980) 231-238. [69] A. Bendo, K. Matsuda, S. Lee, K. Nishimura, N. Nunomura, H. Toda, M. Yamaguchi, T. Tsuru, K. Hirayama, K. Shimizu, Atomic scale HAADF-STEM study of η' and η1 phases in peak-aged Al–Zn–Mg alloys, Journal of Materials Science 53(6) (2018) 4598-4611. [70] N. Birbilis, M. Cavanaugh, R. Buchheit, D. Harlow, R. Wei, Understanding damage accumulation upon AA7075-T651 used in airframes from a microstructural point of view, Materials Science and Technology 2005 Conference, 2005, pp. 57-67. [71] P. Adler, R. Delasi, G. Geschwind, Influence of microstructure on the mechanical, Metallurgical Transactions 3(12) (1972) 3191-3200. [72] P.N. Adler, R. DeIasi, Calorimetric studies of 7000 series aluminum alloys: II. Comparison of 7075, 7050 and RX720 alloys, Metallurgical Transactions A 8(7) (1977) 1185-1190. [73] D. Richard, P.N. Adler, Calorimetric studies of 7000 series aluminum alloys: I. Matrix precipitate characterization of 7075, Metallurgical Transactions A 8(7) (1977) 1177-1183. [74] Y. Zhao, X. Liao, Z. Jin, R. Valiev, Y.T. Zhu, Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing, Acta Materialia 52(15) (2004) 4589-4599. [75] C.D. Marioara, W. Lefebvre, S.J. Andersen, J. Friis, Atomic structure of hardening precipitates in an Al–Mg–Zn–Cu alloy determined by HAADF-STEM and first-principles calculations: relation to η-MgZn 2, Journal of Materials Science 48(10) (2013) 3638-3651. [76] A. Bendo, K. Matsuda, A. Lervik, T. Tsuru, K. Nishimura, N. Nunomura, R. Holmestad, C.D. Marioara, K. Shimizu, H. Toda, An unreported precipitate orientation relationship in Al-Zn-Mg based alloys, Materials Characterization 158 (2019) 109958. [77] A. Lervik, C.D. Marioara, M. Kadanik, J. Walmsley, B. Milkereit, R. Holmestad, Precipitation in an extruded AA7003 aluminium alloy: Observations of 6xxx-type hardening phases, Materials Design 186 (2020) 108204. [78] P. Hofer, H. Cerjak, P. Warbichler, Quantification of precipitates in a 10% Cr steel using TEM and EFTEM, Materials science and technology 16(10) (2000) 1221-1225. [79] J. Majimel, G. Molenat, M.-J. Casanove, D. Schuster, A. Denquin, G. Lapasset, Investigation of the evolution of hardening precipitates during thermal exposure or creep of a 2650 aluminium alloy, Scripta Materialia 46(2) (2002) 113-119. [80] A.L. Garcia-Garcia, I. Dominguez-Lopez, L. Lopez-Jimenez, J.O. Barceinas-Sanchez, Comparative quantification and statistical analysis of η' and η precipitates in aluminum alloy AA7075-T651 by TEM and AFM, Materials characterization 87 (2014) 116-124. [81] J. Werenskiold, A. Deschamps, Y. Bréchet, Characterization and modeling of precipitation kinetics in an Al–Zn–Mg alloy, Materials Science and Engineering: A 293(1-2) (2000) 267-274. [82] A. Deschamps, L. Lae, P. Guyot, In situ small-angle scattering study of the precipitation kinetics in an Al–Zr–Sc alloy, 55(8) (2007) 2775-2783. [83] A. Deschamps, G. Texier, S. Ringeval, L. Delfaut-Durut, Influence of cooling rate on the precipitation microstructure in a medium strength Al–Zn–Mg alloy, Materials Science and Engineering: A 501(1-2) (2009) 133-139. [84] G. Fribourg, Y. Bréchet, J. Chemin, A. Deschamps, Evolution of precipitate microstructure during creep of an AA7449 T7651 aluminum alloy, Metallurgical and Materials Transactions A 42(13) (2011) 3934-3940. [85] R.K. Gupta, A. Deschamps, M.K. Cavanaugh, S.P. Lynch, N. Birbilis, Relating the early evolution of microstructure with the electrochemical response and mechanical performance of a Cu-rich and Cu-lean 7xxx aluminum alloy, Journal of The Electrochemical Society 159(11) (2012) C492. [86] Y.-C. Huang, C.-S. Tsao, C. Lin, Y.-C. Lai, S.-K. Wu, C.-H. Chen, Evolution of Guinier-Preston zones in cold-rolled Al0. 2CoCrFeNi high-entropy alloy studied by synchrotron small-angle X-ray scattering, Materials Science and Engineering: A 769 (2020) 138526. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49887 | - |
dc.description.abstract | 本研究採用目前強度最高之7系列(Al-Zn-Mg-Cu)鋁合金,以AA7075成分適度添加不同含量之Mn元素,探討七系列鋁合金中前期析出物GPI zone的形成條件,以及於類似退化再時效處理(Retrogression and Re-Aging, RRA)中,各時效階段機械性質與析出物之間的關係。對於前期析出物的研究,藉由in-situ小角度X-ray散射(Small Angle X-ray Scattering, SAXS)鑒定GPI zone的最佳形成條件,並利用穿透式電子顯微鏡(Transmission Electron Microscope, TEM)與硬度試驗,觀察GPI zone其尺寸大小、形貌與分佈於晶粒內部之情況而對材料強度產生的貢獻。而對於探討機械性質與析出物之間的關係,透過拉伸試驗測試不同時效處理條件,如T4、T6、模擬溫成型與最後階段高溫烘烤各階段之機械性質,並利用TEM觀察上述熱處理各階段之顯微結構與統計析出物之尺寸,同時搭配SAXS計算η'與η的體積分率與數量密度,從而分析對機械性質產生影響的主要因素,再結合穿透式電子顯微鏡-高解析影像(High Resolution-TEM, HRTEM)進行析出物的鑒定。 由前期析出物的實驗結果得知最適合GPI zone的生成溫度為90 °C,並且於90 °C持溫10分鐘相比於60 °C持溫30分鐘更有利於GPI zone的生成。此外,不論於[100]或[110]晶帶軸觀察,GPI zone皆為圓形,因此GPI zone的形貌應為球狀。 由析出物的量化實驗結果得知鋁合金的機械強度於T6時效階段達到最高值,模擬溫成型之熱處理階段大幅度下降,而最後的高溫烘烤階段則有所回升。從對應的各項析出物參數之變化結果,可以得知析出物的平均尺寸、η析出物的體積分率、η'析出物與η析出物的數量密度對機械強度沒有直接的影響,而η'析出物的體積分率方為影響機械強度的主要因素。另外,於T6時效階段後的η析出物種類主要為η1與η2。 | zh_TW |
dc.description.abstract | In this study, the high strength AA7075 Aluminium alloys, combining with proper Mn content, are carried out to investigate the formation condition of early-stage precipitates in 7xxx series Aluminium alloys, GPI zone, and examine the relationship between mechanical properties and precipitates in different aging treatments, which are similar to the retrogression and re-aging treatment. For the study of early stage precipitates, the best formation condition of GPI zone is confirmed by in-situ Small Angle X-ray Scattering (SAXS). The nano-scaled microstructural evolution of the GPI zone is observed by Transmission Electron Microscopy (TEM) for analyzing their influence on hardness. To investigate the relationship between mechanical properties and precipitates, materials are conducted by tensile test to verify the mechanical properties of different aging treatments such as T4, T6 and for molding the warm forming and paint baking processes. During the aging treatment, the evolution of microstructures and statistics of precipitates size is determined by TEM. Furthermore, volume fraction and number density of η' and η precipitates are assisted by SAXS for analyzing the main influencing factor on the mechanical properties. Moreover, the identification of precipitates could be characterized by High Resolution-TEM (HRTEM). According to the results of early-stage precipitates, the optimal generation temperature of the GPI zone is 90 °C, and holding at 90 °C for 10 minutes is more conducive to the generation of the GPI zone than holding at 60 °C for 30 minutes. In addition, the GPI zone is observed to be circle in shape, no matter from [100] or [110] zone axis, so the morphology of GPI zone should be spherical. The results of the quantification part show that the mechanical strength reaches a maximum value at the T6 aging stage, then decreases greatly at the warm forming stage, and rises at the final paint baking stage. From the quantification results of precipitates, it is known that the average size of precipitates, the volume fraction of η precipitates, the number density of η' and η precipitates do not affect the mechanical strength directly. In contrast, the volume fraction of η' precipitates is the main influencing factor on the mechanical properties. The type of η precipitates are mainly η1 and η2 after T6 aging stage. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T12:25:45Z (GMT). No. of bitstreams: 1 U0001-0602202100380400.pdf: 26428687 bytes, checksum: 20b2664b2ee04201a1fcb0fc8af563c0 (MD5) Previous issue date: 2021 | en |
dc.description.tableofcontents | 口試委員會審定書 誌謝 i 中文摘要 iii ABSTRACT iv CONTENTS vi LIST OF FIGURES ix LIST OF TABLES xviii Chapter 1 前言 1 Chapter 2 文獻回顧 2 2.1 鋁合金之發展 2 2.1.1 鋁合金介紹 2 2.1.2 鋁合金的時效處理 3 2.1.3 合金元素的添加 10 2.2 析出物鑒定 13 2.2.1 析出物介紹 13 2.2.2 AA7075鋁合金之析出物鑒定 14 2.3 析出物的量化工作 28 2.3.1 鋁合金的析出物量化簡介 28 2.3.2 穿透式電子顯微鏡觀察 29 2.3.3 小角度X-ray散射實驗 30 Chapter 3 實驗設計及步驟 32 3.1 實驗步驟 32 3.1.1 實驗材料 32 3.1.2 熱處理設計 32 3.2 實驗儀器與試片製備 34 3.2.1 HV顯微硬度計(Vickers Hardness Tester) 34 3.2.2 拉伸試驗機(Tensile Tester) 34 3.2.3 電子背向散射繞射(Electron Back-Scattered Diffraction, EBSD) 35 3.2.4 穿透式電子顯微鏡(Transmission Electron Microscope) 35 3.2.5 小角度X光散射儀(Small Angle X-ray Scattering, SAXS) 35 Chapter 4 結果與討論 37 4.1 七系列鋁合金前期析出物之演化分析 37 4.1.1 In-situ SAXS實驗結果與分析 37 4.1.2 TEM顯微結構觀察與分析 39 4.1.3 HV微硬度結果分析 45 4.2 頂時效(Peak Aging, T6)階段之熱處理 46 4.2.1 拉伸試驗結果 46 4.2.2 EBSD顯微結構觀察與分析 50 4.2.3 TEM顯微結構觀察與分析 53 4.2.4 SAXS實驗結果與分析 63 4.3 溫成型(Warm Forming, WF)階段之熱處理 66 4.3.1 拉伸試驗結果 66 4.3.2 EBSD顯微結構觀察與分析 67 4.3.3 TEM顯微結構觀察與分析 68 4.3.4 SAXS實驗結果與分析 72 4.4 烤漆(Paint Baking, PB)階段之熱處理 74 4.4.1 拉伸試驗結果 74 4.4.2 EBSD顯微結構觀察與分析 75 4.4.3 TEM顯微結構觀察與分析 76 4.4.4 SAXS實驗結果與分析 85 4.5 頂時效至烤漆階段熱處理之小結 87 Chapter 5 結論 90 Chapter 6 未來工作 92 附錄-SLD的計算 93 REFERENCE 94 | |
dc.language.iso | zh-TW | |
dc.title | AA7075系列鋁合金之機械性質與奈米級析出物演化研究 | zh_TW |
dc.title | A Study on Mechanical Property and Evolution of nano-scale Precipitates in the AA7075 Series Aluminium Alloys | en |
dc.type | Thesis | |
dc.date.schoolyear | 109-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 林新智(Hsin-Chih Lin),王星豪(Shing-Hoa Wang),蘇德徵(Te-Cheng Su),陳志遠(Chiee-Young Chen) | |
dc.subject.keyword | AA7075鋁合金,回復再時效處理,小角度X-ray散射,穿透式電子顯微鏡-高解析影像,GPI zone,T6時效,η'析出物,η析出物, | zh_TW |
dc.subject.keyword | AA7075 Aluminium alloys,Retrogression and Re-Aging (RRA) treatment,Small Angle X-ray Scattering (SAXS),High Resolution-TEM (HRTEM),GPI zone,T6 aging,η' precipitates,η precipitates, | en |
dc.relation.page | 98 | |
dc.identifier.doi | 10.6342/NTU202100625 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2021-02-08 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
U0001-0602202100380400.pdf 目前未授權公開取用 | 25.81 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。