請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49732
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 張家歐(Chia-Ou Chang) | |
dc.contributor.author | Bo-Shiun Huang | en |
dc.contributor.author | 黃柏勳 | zh_TW |
dc.date.accessioned | 2021-06-15T11:44:49Z | - |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-08-15 | |
dc.identifier.citation | [1] 池田拓郎 著, 陳世春 譯著, “基本壓電材料學,” 復漢社出版, 1997/12
[2] 陳麗英, “ MEMS和石英技術爭奪振盪器-訪SiTime公司副總裁Piyush Sevalia先生,” 電子工程專輯, 2011 [3] Sungkyu Lee, Yangho Moon, Jaekyu Lee, Jeongho Yoon, Ji-Hoon Moon, Jong-hee Kim, Seung-Hyun Yoo, Hyungsik Chung, “Analytical and finite element method design of quartz-tuning fork resonators and experimental test of samples manufactured using photolithography 2: comprehensive analysis of resonance frequencies using Sezawa's approximations,” Elsevier, Vacuum 78, pp.91-105, 2005 [4] William C. Albert., “Force Sensing Using Quartz Crystal Flexure Resonators,” 38th Annual Frequency Control Symposium, pp.233-239, 1984 [5] W.J. Kass, G. S. Snow, “Double-ended tuning fork quartz accelerometer,” 40th Annual Frequency Control Symposium, pp.230-236, 1986 [6] Greger Thornell, Håkan Rapp, Klas Hjort, “X-cut miniature tuning forks realized by ion track lithography,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 47(1), pp.8-15, January 2000 [7] Hideaki Itoh, Tomoyuki Yuasa, “An Analysis of Frequency of A Quartz Crystal Tuning Fork by Sezawa's Theory,” IEEE International Frequency Control Symposium, pp.921-925, 1998 [8] Hideaki Itoh, Takashi Matsumoto, “An analysis of frequency of a quartz crystal tuning fork by Sezawa's approximation-the effect of clamped position of its base,” Joint Meeting of the European Frequency and Time Forum and the IEEE International Frequency Control Symposium, pp.494-500, 1999 [9] Hideaki Itoh, Yook-Kong Yong, “An Analysis of Frequency of A Quartz Crystal Tuning Fork By Sezawa's Approximation and Winkler’s Foundation of The Supporting Elinvar Alloy Wire,” IEEE/EIA International Frequency Control Symposium and Exhibition, pp.420-424, 2000 [10] Sungkyu Lee,” Design optimization of surface mount device 32.768kHz quartz tuning fork-type crystals using finite element method and statistical analysis of test samples manufactured using photolighography.” Elsevier, Vacuum 68, pp139-148, 2003. [11] Sungkyu Lee, Yangho Moon, Jeongho Yoon, Hyungsik Chung, “Analytical and finite element method design of quartz-tuning fork resonators and experimental test of samples manufactured using photolithography 1-significant design parameters affecting static capacitance C0,” Elsevier, Vacuum 75, pp.57-69, 2004 [12] A Castellanos-Gomez, N agrait, and G Rubio-Bollinger, “Dyanmics of quartz tuning fork force sensors used in scanning probe microscopy, ” Nanotechnology, 20, 2009 [13] Q.Wang, S.T. Quek, “Flexural vibration analysis of sandwich beam coupled with piezoelectric actuator,” Smart mater. Struct. 9, pp.103-109, 1999 [14] Jan Söderkvist, “Using FEA To Treat Piezoelectric Low-frequency Resonators,” 1997 IEEE International Frequency Control Symposium, pp.634-642, 1997 [15] E.D. Reedy, JR., W.J. Kass, “Finite-element analysis of a quartz digital accelerometer,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 37(5), pp.464-474, 1990 [16] Sungkyu Lee, “Photolithography and Selective Etching of an Array of Quartz Tuning Fork Resonators with Improved Impact Resistance Characteristics.” Jpn. J. Appl. Phys. Vol.40, pp5164-5167, 2001 [17] Sungkyu Lee, “Photolithogrphy and Selective Etching of an Array of Surface Mount Device 32.768 kHz Quartz Tuning Fork Resonators: Definition of Side-Wall Electrodes and Interconnections Using Stencil Mask.” Jpn. J. Appl. Phys. Vol.40, pp5480-5484, 2001 [18] Sungkyu Lee, “Fabrication of an array of surface mount device 32.768 kHz quartz tuning fork-type crystals: photolithography and selective etching of an array of quartz tuning fork resonatros with subsequent photoresist spray coating.” Elsevier, Vacuum 65, pp.161-168, 2002 [19] Greger Thornell , Klas Hjort, Bruno Studer, Jan-Ake Schweitz “Anisotropy-Indepnednt Through Micromachining of Quartz Resonatros by Ion Track Etching,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 44(4), pp.829-838, July 1997 [20] H. Hida, M. Shikida, K. Fukuzawa, Ke. Sato, K. Asaumi, Y. Iriye and Ka. Sato,” Fabrication of a quartz tuning-fork probe with a sharp tip for AFM systeams,” Sensors and Actuators A: Physical. Vol. 148, pp.311-318, 2008 [21] G. Binning, H. Rohrer, Ch. Gerber, and E. Weibel,”Surface studies by Scanning Tunneling Microscopy” Physical Review Letters, 49(1), p.57,1982 [22] G. Binning, C.F. Quate, and Ch. Gerber, ”Atomic Force Microscope”, Physical Review Letters, 56(9), p.930, 1986. [23] 行政院國家科學委員會,微機電系統技術與應用.2003:精密儀器發展中心 [24] Y. Martin, C.C. Williams and H. K. Wickramasinghe, “Atomic force microscope force mapping and profiling on a sub 100 A scale,” Journal of Applied Physics, 61(10), pp.4723-4729, 1987 [25] Q. Zhong , et al. “ Fractured polymer/silica fiber surface studied by tapping mode atomic force microscopy ,” Surface Science, 290(1-2), pp.688-292, 1993 [26] Giessibl F, 2000, 'Atomic resolution on Si(111)-(7x7) by noncontact atomic force microscopy with aforce sensor base on a quartz tuning fork.' Appl. Phys. Lett. 76, 1470-2. [27] Hal Edwards, Larry Taylor, and Walter Duncan, and Allan J. Melmed, 1997 “Fast, high-resolution atomic force microscopy using a quartz tuning fork as actuator and sensor,” Journal of Applied Physics, 82, 980-984. [28] K Saitoh, K Hayashi, Y Shibayama, and K Shirahama, 2009 “A low temperature scanning probe microscope using a quartz tuning fork,” Journal of Physics, 150 . [29] Markus Ternes et al., 2008 'The Force Needed to Move an Atomic on a Surface.' Science, 319, 1066-8. [30] Valkering A, et al., 2005,'A force sensor for atomic point contacts,' Review Scientific Instruments, 76, 103903. [31] Mladen Barbic, Lowell Eliason, James Ranshaw, “Femto-Newton force sensitivity quartz tuning fork sensor,” Sensors and Actuators A, 2007, Volum 136, pp. 564–566 [32] Ueda, T. Kohsaka, F. Iino, T. Yamazaki, D. , “Temperature sensor using quartz tuning fork resonator,”in Proc. 40th Annu. Freq. Contr. Symp. , 1986, pp. 224-229 [33] Jing MA, Bo YOU, “Analysis and design of thermo-sensitive quartz tuning fork resonators for temperature sensors.” Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA) and 2009 China Symposium on Frequency Control Technology, 2009. [34] J.-Y. Wang, M.E. Suddards, C.J. Mellor, and J.R. Owers-Bradley, 2012 “Lung function measurement with multiple-breath-helium washout system,” Medical Engineering & Physics, 13. [35] Michel Christen, “Air and gas damping of quartz tuning forks,” Sensors and Actuators, 4(1983), 555 – 564 [36] Wan Y Shih, Xiaoping Li, Huiming Gu, Wei-Heng Shih, and IIhan A. Aksay, “Simultaneous liquid viscosity and density determination with piezoelectric unimorph cantilevers,” Journal of Applied Physics, 89(2001), 1497-1505 [37] R. Blaauwgeers, M. Blazkova, M. Clovecko, V.B. Eltsov, R. de Graaf, J. Hosio, M. Krusius, D. Schmoranzer, W. Schoepe, L. Skrbek, P. Skyba, R.E. Solntsev, and D.E. Zmeev, 2007 “Quartz tuning fork : Thermometer pressure-and viscometer for Helium liquid,” Journal of Low Temperature Physics, 146, 537-562. [38] Guanghua Wu, Ram H. Datar, Karolyn M. Hansen, Thomas Thundat, Richard J. Cote, and Arun Majumdar, 2001 “Bioassay of prostate-specific antigen (PSA) using microcantilevers,” Nature biotechnology, 19, 856-860. [39] Kristian Franze, 2011 “Atomic force microscopy and its contribution to understanding the development of the nervous system,” Current Opinion in Genetics & Development, 21, 530–537. [40] Wan Y Shih, Xiaoping Li, Huiming Gu, Wei-Heng Shih, and IIhan A. Aksay, 2001 “Simultaneous liquid viscosity and density determination with piezoelectric unimorph cantilevers,” Journal of Applied Physics, 89, 1497-1505. [41] Kristian Franze, “Atomic force microscopy and its contribution to understanding the development of the nervous system,” Current Opinion in Genetics & Development, 21(2011), 530–537. [42] Tamika L. Wilson, Gossett A. Campbell, and Raj Mutharasan, 2007 “Viscosity and density values from excitation level response of piezoelectric-excited cantilever sensors,” Sensors and Actuators A, 138, 44–51 [43] K. Waszczuk, T. Piasecki, K. Nitsch, and T. Gotszalk, 2011 “Application of piezoelectric tuning forks in liquid viscosity and density measurements,” Sensors and Actuators B, 160, 517–523. [44] Jian Zhang, Changchun Dai, Xiaodi Su, Sean J. O’Shea, 2002 “Determination of liquid density with a low frequency mechanical sensor based on quartz tuning fork,” Sensors and Actuators, 84, 123–128. [45] Yi Liu, Rocco DiFoggio, Kerry Sanderlin, Louis Perez, and Jinsong Zhao, 2011 “Measurement of density and viscosity of dodecane and decane with a piezoelectric tuning fork over 298-448K and 0.1-137.9MPa,” Sensors and Actuators A, 167, 347–353. [46] Rupa Patel, Rongnong Zhou, Kristofer Zinszer, Fabien Josse, and Richard Cernosek, “Real time detection of organic compounds in liquid environments using polymer-coated thickness shear mode quartz resonators,” Anal. Chem, 72(2000), 4888-4898. [47] Guanghua Wu, Ram H. Datar, Karolyn M. Hansen, Thomas Thundat, Richard J. Cote, and Arun Majumdar, “Bioassay of prostate-specific antigen (PSA) using microcantilevers,” Nature biotechnology, (2001), 856-860. [48] Jérôme Polesel-Maris, Jérémy Legrand, Thomas Berthelot, Alexandre Garcia, Pascal Viel, Ali Makky, Serge Palacin, “Force spectroscopy by dynamic atomic force microscopy on bovine serum albumin proteins changing the tip hydrophobicity, with piezoelectric tuning fork self-sensing scanning probe,” Sensors and Actuators B, 2011, Volume 161, pp.775– 783 [49] J. C. Brice, “Crystals for Quartz Resonators,” Reviews of Modern Physics, VOL. 57, NO.1, 1985, 105-146 [50] U. Rabe, K. Janser, and W. Arnold, “Vibrations of free and surface-coupled atomic force microscope cantilevers: Theory and experiment,” Review of Scientific Instruments, 67(9), pp.3281-3293,1996 [51] Sasaki, N. et al. “Dynamics of the cantilever in noncontact atomic force microscopy,” Applied Physics A: Materials Science & Processing 66(0), pp.S287-S291,1998 [52] H. Holscher U.D. Schwarz and R. Wiesendanger, “Calculation of the frequency shift in dynamics force microscopy,” Applied surface Science, 140(3-4), pp.344-351, 1999 [53] I.Y. Sokolov, G.S. Henderson, and F.J. Wicks, “Model dependence of AFM simulations in non0contact mode,” Surface Science, 457(1-2), pp.267-272, 2000 [54] M. Basso, et al. “Complex Dynamics in a Harmonically Excited Lennard0Jones Oscillator: Microcantilever-Sample Interaction in Scanning Probe Microscopes,” Journal of Dynamic Systems, Measurement, and Control, 122(1), pp.240-245, 2000 [55] M. Guggisber, et al. “Separation of interaction by noncontact force microscopy,” Physical Review B, 61, pp.11151-11155, 2000 [56] R. Matsuda and S. Fukui, “Asymptotic analysis of ultra0thin gas squeeze film lubrication for infinitely large squeeze number” ASME, 1994 [57] R. F. Fung and S. C. Huang, “Dynamic Modeling and Vibration Analysis of the Atomic Force Microscope,” 123(4), pp.502-509, 2001 [58] 科技部高瞻自然科學資源教學平台, http://highscope.ch.ntu.edu.tw/wordpress/?p=48196 [59] Sarid D, “Scanning force microscopy: with applications to electric, magnetic and atomic forces.” Oxford University Press, 1991 [60] David B. Hough and Lee R. White, “The Calculation of Hamaker Constant from Lifshitz Theory with Application to Wetting Phenomena” Advances in Colloid and Interface Science, 14, pp.3-41, 1980 [61] Garc´ıa, R. & San Paulo, “Attractive and repulsive tip–sample interaction regimes in tapping-mode atomic force microscopy.” Phys. Rev. B 60, pp.4961–4967, 1999 [62] Israelachvili, J. Intermolecular and surface forces, 2nd edn. Academic, 1991 [63] Pfeiffer, O., Loppacher, C., Wattinger, C., Bammerlin, M., Gysin, U., Giggisberg, M., Rast, S., Bennewitz, R., Meyer, E. & Gぴuntherodt, H.-J. “Using higher flexural modes in noncontact force microscopy. “Appl. Surf. Sci. 157, pp.337–342, 2000 [64] Charles Kittel, Introduction to Solid State Physics, 8th ed., Wiley, 2005 [65] 張沛霖等, “壓電材料與器件物理,” 山東科學技術出版社 [66] 壓電效應及材料, http://ins22web.seu.edu.cn/chgq/chap1-11/cgq601-1.htm [67] “IEEE Standard on Piezoelectricity (1987),” Institute of Electrical and Electronics Engineers, Inc. [68] 述本正美, 廖詩文, “高頻通訊用晶體振盪器的技術及發展,” 電子與材料雜誌, 第13期, pp.126-131, 2002 [69] TXC Corporation, http://www.txccrystal.com/index.html [70] Tiller Jr., Peter N., Mike Johnson, “Piezoelectric Ceramics: Science Meets Pottery,” Electronic Design, 2/14/2008, Vol. 56 Issue 3, p51-56 [71] Jinhua Zhengke Electronics Co., Ltd., http://www.cnzkc.com/en/index.aspx [72] 周卓明, “壓電力學,” 全華科技圖書股份有限公司出版, 2003/11 [73] D.A. Berlincourt, D. R. Curran, F. Patat, “Piezoelectric and piezomagnetic materials and their function as transducers,” in Physical Acoustic, W. P. Mason Ed., 1A, Academic Press, New York, 1964 [74] R. Bechmann, “Elastic and Piezoelectric Constants of Alpha- Quartz,” Physical Review, Vol. 110, pp.1060-1061, 1958 [75] Jiashi Yang, Analysis of Piezoelectric Devices, World Scientific, 2006 [76] H.F. Weinberger, Partial Differential Equations with Complex Variables and Transform Method, pp.70-75, 1970 [77] Eringen, A. C., Mechanics of Continua, 1967, pp.142 [78] Raymond D. Mindlin, “Forced Thickness-Shear and Flexural Vibrations of Piezoelectric Crystal Plates,” Journal of Applied Physics, Vol.23, No.1, pp.83-88, Jan. 1952 [79] B.S. Huang, W.T. Chang-Chien, F.H. Hsieh, Y. F. Chou and C.O. Chang, “Analysis of the natural frequency of a quartz double-end tuning fork with a new deformation model,” Journal of Micromechanics and Microengineering, 26(6), 2016 [80] Sebastian Rützel, Soo Il Lee, Arvind Raman,”Nonlinear dynamics of atomic–force–microscope probes driven in Lennard–Jones potentials,” Proc. R. Soc. London, Ser. A, 459, pp.1925-1948,2003 [81] Lennard-Jones, J. E. Cohesion. Proceedings of the Physical Society 1931, 43, 461-482 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49732 | - |
dc.description.abstract | 本文主要研究對象為 單端固定音叉式石英振盪器,分析石英音叉之特徵頻率及線性外力對石英音叉振盪器共振頻率的影響,並探討凡得瓦力造成共振頻率飄移量與量測初始距離之關係。本文針對異相振盪行為進行分析,中央音叉樑視為尤拉樑,質量塊則依據音叉樑異相振盪對質量塊所造成的力矩來建立翹曲形變的模型。耦合部分,假設其結構為彈性體,分別討論各自結構自由振動行為,再利用漢米頓定理推導出運動統御方程式及邊界條件,用以耦合機械性質連續關係;並討論石英音叉在幾何尺寸上對其特徵頻率的影響,分析尺寸對於共振頻率之敏感度,以此作製程誤差分析及光罩設計之參考並以此為音叉振盪器的設計依據,於頻率準確度與製程難度中取得平衡,以達到良率提升之目的。
此外,針對石英音叉振盪器分析在尖端受外力及凡得瓦力對共振頻率的影響,利用Lennard-Jones勢能模型推導出與距離有關的非線性力,並將此力藉由泰勒展開式擬線性化並將其代入所推導出的統御方程式及其邊界條件,並求得在不同距離時凡得瓦力對共振頻率的影響,建立此分析模型所推導出的凡得瓦力距離對頻率影響關係並應用於原子顯微鏡之量測精度與準確性的改良。 | zh_TW |
dc.description.abstract | The thesis mainly studied about single-ended tuning fork quartz resonator, analysis the natural frequency of Quartz tuning fork (QTF) resonator, and the effect of resonant frequencies of the quartz tuning fork by linear external force, and discussion on the relation between the frequency shift caused by Van der Waals Force and the initial detected distance. Focusing on the analysis of the anti-phase mode, the study regards a central tuning fork as the Euler beam, and two ends of the proof masses built the warping model according to the moment caused by the anti-phase mode from the tuning fork to the proof masses. Assuming the coupling structure as an elastic body, and discussing the free vibration to each structure; using the Hamilton's principle to derive the governing equation and the boundary condition for coupling the continuous mechanical relationship. For understanding the impact of the process error to the resonant frequency and the convenience for designing, the study has analyzed the impact of the dimension to the sensitivity of the resonant frequency for being the references of the process error analysis and the design of the mask; in order to improve the yield, it must get the balance between the frequency accuracy and the difficulty during the process.
Furthermore, for analyzing the effect of resonant frequencies of QTF by linear external force and Van der Waals force acting on the tip, this study using Lennard-Jones potential model to derive the nonlinear force related with distances and making the force linearization by Tayler expansion. Introducing the Van der Waals force into the governing equation and boundary conditions and analyzing the effect of resonant frequencies on different distances. This research make a relationship between the distance of force and frequency shift, this relationship can be use to improve the precision of atomic force microscope. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T11:44:49Z (GMT). No. of bitstreams: 1 ntu-105-D98543013-1.pdf: 3853087 bytes, checksum: 18dd577e9cb192e0994bb44182ecacad (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 口試委員會審定書……………………………………………………………… i
誌謝………………………………………………………………………………………… ii 中文摘要…………………………………………………………………………… iii 英文摘要…………………………………………………………………………iv 目錄…………………………………………………………………………………vi 圖目錄…………………………………………………………………………………ix 表目錄…………………………………………………………………………………xii 符號說明………………………………………………………………………………xiv 第一章 導論……………………………………………………………………………1 1.1 前言………………………………………………………………………………1 1.2石英音叉振盪器…………………………………………………………………2 1.3原子力顯微鏡……………………………………………………………………9 1.4文獻回顧…. ………………………………………………………………………12 1.5 研究目的與各章節摘要…………………………………………………………16 第二章 石英晶體特性.. ………………………………………………………………18 2.1晶格對稱性…. ……………………………………………………………………18 2.2石英晶體結構…. …………………………………………………………………18 2.3切角特性…………………………………………………………………………20 2.4壓電效應…………………………………………………………………………23 2.5石英材料參數……………………………………………………………………26 2.6漢梅克常數………………………………………………………………………29 第三章 單端固定式石英音叉振盪器分析.. ………………………………………30 3.1 石英樑側向振動分析…. ………………………………………………………30 3.1.1 座標系統………………………………………………………………………31 3.1.2 石英樑變形假設.. …………………………………………………………….31 3.1.3 漢米頓原理.. ………………………………………………………………….33 3.1.4 石英樑統御方程式.. ………………………………………………………….35 3.1.5 石英樑特徵值與位移解模型.. ………………………………………………37 3.2 質量塊振動分析.. ……………………………………………………………...38 3.2.1質量塊變形假設……………………………………………………………....38 3.2.2 漢米頓原理.. …………………………………………………………………40 3.2.3 質量塊統御方程式.. …………………………………………………………42 3.2.4 質量塊特徵值與位移解模型…………………………………………………42 3.3 石英振盪器異相振盪分析.. ……………………………………………………43 3.3.1 石英振盪器邊界耦合.. ……………………………………………………….44 3.4 有限元素法分析.. ………………………………………………………………49 3.4.1 有限元素法基本概念.. ……………………………………………………….49 3.4.2 有限元素網格規劃.. ………………………………………………………….49 3.4.3 有限元素軟體.. ……………………………………………………………….50 3.5 實驗量測.. ………………………………………………………………………50 3.5.1 石英音叉振盪器外形量測 .. ………………………………………………...50 3.5.2 石英音叉振盪器頻率量測 .. ………………………………………………...53 3.6 結果與討論.. ……………………………………………………………………55 3.6.1 特徵頻率分析.. ……………………………………………………………….55 3.6.2 外型尺寸敏感性.. …………………………………………………………….57 3.6.3 差異性分析……………………………………………………………………63 第四章石英音叉振盪體受凡得瓦力影響..………………………………………...68 4.1 Lennar-Jones勢能模型………………………………………………………….68 4.2 石英樑受凡得瓦力影響之漢米頓原理.. ………………………………………70 4.2.1 位移假設.. …………………………………………………………………….70 4.2.2 石英樑之動能、彈性位能及非保守力作功…………………………………72 4.2.3 石英樑受凡得瓦力影響之統御方程式.. …………………………………….74 4.3 石英樑受凡得瓦力影響之靜平衡解…………………………………………...75 4.4 音叉樑位移解.. …………………………………………………………………78 4.5 凡得瓦力作用下單端音叉式石英振盪器振盪模態分析.. ……………………82 4.6 有限元素法分析……………………………………………………………………88 4.7 結果與討論…………………………………………………………………………88 4.7.1 尖端半徑與漢梅克常數對頻率飄移影響……………………………………90 4.7.2 石英音叉振盪外觀尺寸對頻率飄移敏感性分析………………………………94 結論…………………………………………………………………………………98 參考文獻.. …………………………………………………………………………100 附錄A…………………………………………………………………………… 112 附錄B………………………………………………………………………… 114 | |
dc.language.iso | zh-TW | |
dc.title | 石英音叉振盪器自然頻率之分析與量測及線性外力對頻率之影響分析 | zh_TW |
dc.title | Analysis and Measurement on the Natural Frequencies and the Effect of Linear External Force on the Frequencies to the Quartz Tuning-Fork Resonator | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 博士 | |
dc.contributor.coadvisor | 張簡文添(Wen-Tian Chang Chien) | |
dc.contributor.oralexamcommittee | 謝發華(Fa-Hwa Hsieh),周傳心,陳柏志 | |
dc.subject.keyword | 音叉振盪器,石英,共振頻率,凡得瓦力,漢米頓定理, | zh_TW |
dc.subject.keyword | tuning fork resonator,quartz,resonant frequencies,van der waals force, | en |
dc.relation.page | 116 | |
dc.identifier.doi | 10.6342/NTU201602465 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2016-08-15 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-1.pdf 目前未授權公開取用 | 3.76 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。