請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49124完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 李岳聯(Yueh-Lien Li) | |
| dc.contributor.author | Chung-Ying Lee | en |
| dc.contributor.author | 李忠縈 | zh_TW |
| dc.date.accessioned | 2021-06-15T11:16:40Z | - |
| dc.date.available | 2017-08-25 | |
| dc.date.copyright | 2016-08-25 | |
| dc.date.issued | 2016 | |
| dc.date.submitted | 2016-08-19 | |
| dc.identifier.citation | 1. G. H. Koch, P. Michiel, Y. P. Virmani, and J. Payer, 'Cost of Corrosion Study Unveiled.'
2. T. Liu, P. Tavner, Y. Feng, and Y. Qiu, 'Review of recent offshore wind power developments in china,' Wind energy, vol. 16, pp. 786-803, 2013. 3. E. ISO, '12944-2,' Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 2: Classification of environments (ISO 12944, vol. 2, 1998. 4. G. D. Davis, R. C. Dunn, and R. A. Ross, 'Wireless, Battery-Powered Coating Health Monitor(CHM),' ed: National Association of Corrosion Engineers, P. O. Box 218340 Houston TX 77084 USA, 2010. 5. 杜柄龍, '風力發電工程執行之關鍵影響因素探討,' 臺灣大學土木工程學研究所學位論文, pp. 1-99, 2010. 6. 吳柏均, '流致共振分析方法與風機葉片實例應用,' 臺灣大學工程科學及海洋工程學研究所學位論文, pp. 1-122, 2015. 7. G. H. Koch, M. P. Brongers, N. G. Thompson, Y. P. Virmani, and J. H. Payer, 'Corrosion cost and preventive strategies in the United States,' 2002. 8. A. Astaneh-Asl, 'Progressive collapse of steel truss bridges, the case of I-35W collapse,' in Proceedings of 7th International Conference on Steel Bridges, Guimarăes, Portugal, 2008. 9. 'I-35W bridge.' 10. W. R. Hendricks, 'The Aloha Airlines accident—a new era for aging aircraft,' in Structural integrity of aging airplanes, ed: Springer, 1991, pp. 153-165. 11. 'The nine most heroic airline pilots of all time.' 12. 金磊, '韩国 “三丰” 大厦倒塌后的技术与管理思考,' 国外建筑科学, vol. 13, pp. 49-51, 1995. 13. 'Superstore Collapse '. 14. 許登貴, '管線上均勻腐蝕對導波檢測之影響,' 中山大學機械與機電工程學系研究所學位論文, pp. 1-150, 2014. 15. '氣爆油管.' 16. J. Gonzalez, C. Andrade, C. Alonso, and S. Feliu, 'Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement,' Cement and Concrete Research, vol. 25, pp. 257-264, 1995. 17. 'Uniform (or general) corrosion.' 18. Z. Szklarska-Smialowska, Pitting corrosion of metals: National Association of Corrosion Engineers, 1986. 19. 'Pitting corrosion '. 20. J. Oldfield and W. Sutton, 'Crevice corrosion of stainless steels: i. a mathematical model,' British corrosion journal, vol. 13, pp. 13-22, 1978. 21. 'Crevice corrosion.' 22. M. Shimada, H. Kokawa, Z. Wang, Y. Sato, and I. Karibe, 'Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering,' Acta Materialia, vol. 50, pp. 2331-2341, 2002. 23. 'Intergranular corrosion.' 24. K. Sieradzki and R. Newman, 'Stress-corrosion cracking,' Journal of physics and chemistry of solids, vol. 48, pp. 1101-1113, 1987. 25. 李瀅, 'SAE 8620 合金鋼應力腐蝕特性之研究,' 臺灣大學材料科學與工程學研究所學位論文, pp. 1-65, 2007. 26. G. E. Dieter and D. J. Bacon, Mechanical metallurgy vol. 3: McGraw-Hill New York, 1986. 27. M. Tavakkolizadeh and H. Saadatmanesh, 'Galvanic corrosion of carbon and steel in aggressive environments,' Journal of Composites for Construction, vol. 5, pp. 200-210, 2001. 28. 'Galvanic corrosion.' 29. A. J. Bard, L. R. Faulkner, J. Leddy, and C. G. Zoski, Electrochemical methods: fundamentals and applications vol. 2: Wiley New York, 1980. 30. R. W. Revie, Corrosion and corrosion control: John Wiley & Sons, 2008. 31. M. G. Fontana, Corrosion engineering: Tata McGraw-Hill Education, 2005. 32. E. Hollingsworth and H. Hunsicker, 'Corrosion of aluminum and aluminum alloys,' ASM Handbook., vol. 13, pp. 583-609, 1987. 33. E. McCafferty, Introduction to corrosion science: Springer Science & Business Media, 2010. 34. M. Stern and A. L. Geary, 'Electrochemical polarization I. A theoretical analysis of the shape of polarization curves,' Journal of the electrochemical society, vol. 104, pp. 56-63, 1957. 35. H. W. Pickering, 'Characteristic features of alloy polarization curves,' Corrosion Science, vol. 23, pp. 1107-1120, 1983. 36. K. Osozawa and H.-J. Engell, 'The anodic polarization curves of iron-nickel-chromium alloys,' Corrosion Science, vol. 6, pp. 389-393, 1966. 37. M. E. Orazem and B. Tribollet, Electrochemical impedance spectroscopy vol. 48: John Wiley & Sons, 2011. 38. B.-Y. Chang and S.-M. Park, 'Electrochemical impedance spectroscopy,' Annual Review of Analytical Chemistry, vol. 3, pp. 207-229, 2010. 39. E. Ivers‐Tiffée, A. Weber, and H. Schichlein, 'Electrochemical impedance spectroscopy,' Handbook of fuel cells, 2003. 40. A. Amirudin and D. Thieny, 'Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals,' Progress in organic coatings, vol. 26, pp. 1-28, 1995. 41. C. G. Munger and L. D. Vincent, 'Corrosion prevention by protective coatings,' 1999. 42. G. Wranglén, 'An introduction to corrosion and protection of metals,' 1985. 43. E. Ghali, V. S. Sastri, and M. Elboujdaini, Corrosion prevention and protection: practical solutions: John Wiley & Sons, 2007. 44. D. Prediger and D. Ghosh, 'Anode oxidation protection in a high-temperature fuel cell,' ed: Google Patents, 2001. 45. '電化學陰極保護法.' 46. S. Szabó and I. Bakos, 'Impressed current cathodic protection,' Corrosion Reviews, vol. 24, pp. 39-62, 2006. 47. A. W. Peabody and R. Bianchetti, Control of pipeline corrosion: National Association of Corrosion Engineers, 1967. 48. '電化學陰極保護法特色表.' 49. B. Thierry, M. Tabrizian, C. Trepanier, O. Savadogo, and L. H. Yahia, 'Effect of surface treatment and sterilization processes on the corrosion behavior of NiTi shape memory alloy,' Journal of biomedical materials research, vol. 51, pp. 685-693, 2000. 50. L. Pawlowski, The science and engineering of thermal spray coatings: John Wiley & Sons, 2008. 51. J. Culcasi, P. Sere, C. Elsner, and A. Di Sarli, 'Control of the growth of zinc–iron phases in the hot-dip galvanizing process,' Surface and Coatings Technology, vol. 122, pp. 21-23, 1999. 52. T. Ikeda and H. Satoh, 'Phase formation and characterization of hard coatings in the Ti Al N system prepared by the cathodic arc ion plating method,' Thin Solid Films, vol. 195, pp. 99-110, 1991. 53. G. O. Mallory and J. B. Hajdu, Electroless plating: fundamentals and applications: William Andrew, 1990. 54. D. W. Brenner, 'Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films,' Physical Review B, vol. 42, p. 9458, 1990. 55. Z. W. Wicks Jr, F. N. Jones, S. P. Pappas, and D. A. Wicks, Organic coatings: science and technology: John Wiley & Sons, 2007. 56. P. M. Ajayan, L. S. Schadler, and P. V. Braun, Nanocomposite science and technology: John Wiley & Sons, 2006. 57. L. Shi, C. Sun, P. Gao, F. Zhou, and W. Liu, 'Mechanical properties and wear and corrosion resistance of electrodeposited Ni–Co/SiC nanocomposite coating,' Applied Surface Science, vol. 252, pp. 3591-3599, 2006. 58. 黃鈺琳, '銅, 鋅, 鋁在含硫環境中大氣腐蝕行為相關研究,' 2012. 59. P. R. Roberge, Corrosion inspection and monitoring vol. 2: John Wiley & Sons, 2007. 60. H. Man, H. Man, and L. Leung, 'Corrosion protection of NdFeB magnets by surface coatings-Part I: Salt spray test,' Journal of magnetism and magnetic materials, vol. 152, pp. 40-46, 1996. 61. J. Wilson and M. Sykes, 'Is zonation on coastal sand dunes determined primarily by sand burial or by salt spray? A test in New Zealand dunes,' Ecology letters, vol. 2, pp. 233-236, 1999. 62. S. S. Pathak, M. D. Blanton, S. K. Mendon, and J. W. Rawlins, 'Investigation on dual corrosion performance of magnesium-rich primer for aluminum alloys under salt spray test (ASTM B117) and natural exposure,' Corrosion Science, vol. 52, pp. 1453-1463, 2010. 63. 'Salt spray test.' 64. A. D610-08, 'Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces,' 2008. 65. W. S. Tait, An introduction to electrochemical corrosion testing for practicing engineers and scientists: PairODocs Publications, 1994. 66. B. Conway, L. Bai, and D. Tessier, 'Data collection and processing of open-circuit potential-decay measurements using a digital oscilloscope: derivation of the H-capacitance behaviour of H2-evolving, Ni-based cathodes,' Journal of electroanalytical chemistry and interfacial electrochemistry, vol. 161, pp. 39-49, 1984. 67. U. R. Evans, An introduction to metallic corrosion: Edward Arnold Ltd., 1981. 68. P. Bonora, F. Deflorian, and L. Fedrizzi, 'Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosion,' Electrochimica Acta, vol. 41, pp. 1073-1082, 1996. 69. G. D. Davis, R. A. Ross, and S. Raghu, 'Coating Health Monitoring System for Army Ground Vehicles,' Corrosion2007, Paper, vol. 7230, pp. 11-28, 2007. 70. P. D. Ryan Dunn & Guy Davis, 'Monitoring Coating Degradation with a Wireless, Battery-Powered Coating Health Monitor (CHM),' pp. 12-20, 2010/07/07. 71. 'Gamry Instruments Reference 600 Plus.' 72. G. B. Clayton and S. Winder, Operational amplifiers: Newnes, 2003. 73. S. Ramo, J. R. Whinnery, and T. Van Duzer, Fields and waves in communication electronics: John Wiley & Sons, 2008. 74. A. Yariv, 'Introduction to optical electronics,' 1976. 75. G. Bierwagen, D. Tallman, J. Li, L. He, and C. Jeffcoate, 'EIS studies of coated metals in accelerated exposure,' Progress in Organic Coatings, vol. 46, pp. 149-158, 2003. 76. F. Mansfeld, 'Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings,' Journal of Applied Electrochemistry, vol. 25, pp. 187-202, 1995. 77. J. Campbell, 'RF signal generator,' ed: Google Patents, 1977. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49124 | - |
| dc.description.abstract | 台灣因地處高溫高濕及高鹽份的環境中，腐蝕情況甚為普遍。為了抵抗金屬材料因腐蝕造成的破壞，施予金屬表面一層保護塗層為不可或缺的一環。然而塗層在腐蝕環境中同樣會遇到劣化的情形，因此如何即時偵測塗層破壞的情形也是值得重視的問題，特別是離岸型無人設施的遠端腐蝕監測技術的建立。本研究第一部分將使用ElectraWatch Coating Health Monitor(CHM)腐蝕監測儀器進行研究，並且比對利用恆電位儀所測得的交流阻抗數據，確認CHM監測腐蝕的準確性、缺陷產生之靈敏度量測、阻抗量測極限值與遠端傳輸之功能。第二部分針對CHM量測之極限結果進行改良，設計電路系統解決CHM於低頻高阻抗之量測極限，並針對電路系統量測交流阻抗之準確性、極限值量測、與腐蝕監控進行實驗。
第一部分的實驗結果發現CHM在量測交流阻抗108歐姆以下之防蝕塗層數據上與恆電位儀之數據具有一致性，但是針對塗層輕微毀損所對應之交流阻抗下降行為並無法快速測得。另一方面，在商用塗層測試實驗中發現，當防蝕塗層之交流阻抗值超過儀器量測上限108歐姆後，CHM儀器無法量測商用塗層之交流阻抗數據。且其塗層量測範圍距離電極輔助膠帶僅30毫米。遠端傳輸部分測試結果為20公尺。 第二部分的實驗結果顯示電路系統在量測防蝕塗層之交流阻抗數據之精準度上可比擬恆電位儀，且商用塗層之交流阻抗量測極限值可至1010歐姆，此部分之結果優於CHM之量測極限。在腐蝕監測實驗結果顯示電路系統可精確的量測出塗層因毀損而導致的交流阻抗值改變，精準度可比擬恆電位儀。 電路系統初步測試可解決CHM應用於離岸風機防蝕塗層監控技術上之量測極限。未來將針對簡化裝置與架設部分進行開發並優化遠端傳輸功能。 | zh_TW |
| dc.description.abstract | Corrosion is always accompanied by disaster in Taiwan because of the high temperature, high humidity, and high salinity environment. To protect metal from corroding in this severe environment, paint coatings are commonly applied on the surface of metal to enhance its corrosion resistance. In order to monitor the health and effectiveness of the coating in the corrosive environment, ElectraWatch Coating Health Monitor (CHM) is employed in the investigation of the corrosion characteristics of coating in this paper. First of all, we compare the data between CHM and Potentiostat Gamry Ref600 to confirm the accuracy of CHM. Then, we test the sensitivity, the limit of impedance at low frequency, and remote transmission ability about CHM. Finally, we focus on the limit of impedance at low frequency and remote transmission ability to make improvements. We design a circuit board to increase the measurement range of impedance. Then, we design the experiment to test the ability of Circuit Test System about its accuracy, limit of measurement, and corrosion monitoring.
From the first part of experiment, we discover the accuracy of CHM is consistency with Potentiostat, but CHM has poor ability to test the change of the impedance when the coating is little defect. Moreover, in the test of commercial coating, CHM can’t measure the impedance of the coating because the impedance exceed 108 ohms, the limit of CHM. We also test the measurement range about CHM, and we find its measurement range is apart from electrode type only 30 millimeters. Finally, we test about the remote transmission distance of CHM, and we find that the remote transmission distance of CHM is about 20 meters From the second part of experiment, we discover the accuracy of Circuit Test System is also consistency with Potentiostat. In addition, the measurement limit on testing the impedance of the Circuit Test System is higher than 1010 ohms. Finally, from the experiment of the corrosion monitoring test, we find Circuit Test System can accurately test the change of impedance when the coating begin to emerge defect. We can use Circuit Test System to solve the problem of CHM about testing limit when we need to monitor the corrosion of the coating of offshore turbines. In the future, we will develop the equipment and improve the ability of the remote transmission distance. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-15T11:16:40Z (GMT). No. of bitstreams: 1 ntu-105-R03525021-1.pdf: 4699632 bytes, checksum: ace88bc6109d2cdd2cc2c7d0c8f8a7f1 (MD5) Previous issue date: 2016 | en |
| dc.description.tableofcontents | 口試委員審定書 i
誌謝ii 中文摘要iii 英文摘要iv 第一章 前言1 第二章 文獻回顧3 2-1 離岸風機發展簡介3 2-2 腐蝕的介紹與分類4 2-2-1 腐蝕的介紹 4 2-2-2 腐蝕的分類7 2-3 腐蝕的檢測機制17 2-3-1 腐蝕熱力學-Pourbaix diagram 17 2-3-2 腐蝕動力學19 2-4 腐蝕的防治技術23 2-4-1 電化學防蝕方法24 2-4-2 表面處理法26 2-5 塗層的腐蝕評估方法29 2-5-1 現場環境測試29 2-5-2 腐蝕環境浸泡測試29 2-5-3 鹽霧試驗測試30 2-5-4 電化學分析法32 第三章 實驗方法及步驟 34 3-1 實驗儀器介紹34 3-1-1塗層損傷監測儀(Coating Health Monitor) 34 3-1-2 恆電位儀(Potentiostat Gamry Ref600) 37 3-1-3 塗層腐蝕測試電路系統(Coating Circuit System) 39 3-2 材料來源及選用44 3-2-1 底材選用44 3-2-2 塗料選用 45 3-2-3 商用塗層與風機塗層45 3-3 實驗流程46 3-4 塗層分散與試片備置49 3-5CHM 功能測試49 3-5-1 準確性測試49 3-5-2 不同環境下之靈敏度測試51 3-5-3 損傷劣化監測試驗52 3-6 模擬風機塗層測試54 3-6-1 商用塗層準確性測試54 3-6-2 商用塗損傷劣化監測試驗56 3-6-3 遠端傳輸距離測試58 3-7 塗層腐蝕測試電路系統功能測試59 3-7-1 準確性測試59 3-7-2 極限值測試 60 3-7-3 腐蝕監控60 第四章 實驗結果與討論62 4-1 CHM 功能測試分析62 4-1-1 準確性測試結果分析62 4-1-2 不同環境下之靈敏度測試結果分析67 4-1-3 損傷劣化測試結果分析72 4-2 模擬風機塗層測試結果分析75 4-2-1 損傷劣化監測結果分析75 4-2-2 損傷劣化監測結果分析79 4-2-3 遠端傳輸距離測試結果分析82 4-3 塗層腐蝕測試電路統功能測試結果分析83 4-3-1 電路系統準確性結果分析83 4-3-2 電路系統極限值測試結果88 4-3-3 腐蝕監測結果分析94 4-3-4 腐蝕監測儀器探討101 第五章 結論103 參考文獻104 | |
| dc.language.iso | zh-TW | |
| dc.subject | 交流阻抗 | zh_TW |
| dc.subject | 電化學 | zh_TW |
| dc.subject | 腐蝕監測 | zh_TW |
| dc.subject | CHM | en |
| dc.subject | EIS | en |
| dc.subject | Electrochemistry | en |
| dc.subject | Corrosion Monitor | en |
| dc.title | 離岸風機防蝕塗層性質監測技術之開發及應用 | zh_TW |
| dc.title | The Development of Corrosion Monitoring Technique on the Coating of Offshore Wind Turbines | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 104-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.coadvisor | 林輝政(Huei-Jeng Lin) | |
| dc.contributor.oralexamcommittee | 林招松(Chao-Sung Lin),鄭錦榮(Jin-Rong Zheng) | |
| dc.subject.keyword | 腐蝕監測,電化學,交流阻抗, | zh_TW |
| dc.subject.keyword | Corrosion Monitor,CHM,Electrochemistry,EIS, | en |
| dc.relation.page | 108 | |
| dc.identifier.doi | 10.6342/NTU201603203 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2016-08-21 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 工程科學及海洋工程學研究所 | zh_TW |
| 顯示於系所單位： | 工程科學及海洋工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-105-1.pdf 未授權公開取用 | 4.59 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。