請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/46166
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陽毅平(Yee-Pien Yang) | |
dc.contributor.author | Feng-Chou Tsai | en |
dc.contributor.author | 蔡豐州 | zh_TW |
dc.date.accessioned | 2021-06-15T04:56:19Z | - |
dc.date.available | 2012-08-03 | |
dc.date.copyright | 2010-08-03 | |
dc.date.issued | 2010 | |
dc.date.submitted | 2010-07-29 | |
dc.identifier.citation | [1] C. E. Brubaker, 'Advances in wheelchair technology,' IEEE Engineering in Medicine and Biology Magazine, vol.7, no.3, pp.21-24, Sep. 1988.
[2] J. M. Barnard, I. D. van Wyk and W. G. Dunford, 'A new drive system for battery operated wheelchairs using 3-phase cage rotor induction machines,' in Proceedings of International Conference on Industrial Electronics, Control, Instrumentation, and Automation, San Diego, CA, USA, 9-13 Nov. 1992, vol.1, pp.138-143. [3] R. Nilssen, S. E. Skaar, R. Lund, T. Skjellnes, S. Ovrebo and E. Lovli, 'Design of a permanent magnet synchronous motor integrated in the wheel rim on wheelchairs,' in European Conference on Power Electronics and Applications, Dresden, Germany, 2005, pp.1-8. [4] T. Yasuda, D. Furikado and K. Tanaka, 'One hand drive wheelchair with new manipulation mechanism and assist functions,' in IEEE/RSJ International Conference on Intelligent Robots and Systems, Beijing, China, 9-15 Oct. 2006, pp.2833-2838. [5] K. Sakai, T. Yasuda and K. Tanaka, 'Improvements of manipulation torque transfer mechanism and assist unit for one hand drive wheelchair with a triple ring,' in IEEE International Conference on Robotics and Biomimetics, Guilin, China, 19-23 Dec. 2009, pp.196-201. [6] M. Wada, 'Holonomic and omnidirectional wheelchairs with synchronized 4WD mechanism,' in IEEE/RSJ International Conference on Intelligent Robots and Systems, San Diego, CA, USA, 29 Oct.-2 Nov. 2007, pp.1196-1202. [7] T. Masuzawa, Y. Nakajima, H. Ikeda and S. Minami, 'Development of all directional powered wheelchair,' in IEEE Conference on Vehicle Power and Propulsion, Harbin, China, 3-5 Sep. 2008, pp.1-2. [8] Y. P. Yang, W. C. Huang and C. W. Lai, 'Optimal design of rim motor for electric powered wheelchair,' IET Transactions on Electric Power Applications, vol.1, no.5, pp.825-832, Sep. 2007. [9] Y. P. Yang and Z. H. Lee, 'A novel wheelchair powered by dual rim motors,' in IEEE International Conference on Electric Machines and Drives, Miami, FL, USA, 3-6 May 2009, pp.1284-1289. [10] H. Wijenayake, J. M. Bailey, and P. J. McCleer, 'Design optimization of an axial gap permanent magnet brushless DC motor for electric vehicle applications,' in IEEE Conference on Industry Applications, Orlando, FL, USA, 8-12 Oct. 1995, vol.1, pp.685-692. [11] M. K. Kim, C. G. Lee, and H. K. Jung, 'Multiobjective optimal design of three-phase induction motor using improved evolution strategy,' IEEE Transactions on Magnetics, vol.34, no.5, pp.2980-2983, Sep. 1998. [12] Y. D. Chun, S. Wakao, T. H. Kim, K. B. Jang, and J. Lee, 'Multiobjective design optimization of brushless permanent magnet motor using 3D equivalent magnetic circuit network method,' IEEE Transactions on Applied Superconductivity, vol.14, pp.1910-1913, Jun. 2004. [13] Y. P. Yang, Y. P. Luh, and C. H. Cheung, 'Design and control of axial-flux brushless DC wheel motors for electric vehicles-part I: multiobjective optimal design and analysis,' IEEE Transactions on Magnetics, vol.40, no.4, pp.1873-1882, Jul. 2004. [14] Y. P. Yang, J. P. Wang, S. W. Wu, and Y. P. Luh, 'Design and control of axial-flux brushless DC wheel motors for electric vehicles-part II: optimal current waveforms and performance test,' IEEE Transactions on Magnetics, vol.40, no.4, pp.1883-1891, Jul. 2004. [15] K. S. R. Rao and A. H. Bin Othman, 'Design optimization of a BLDC motor by Genetic Algorithm and Simulated Annealing,' in IEEE International Conference on Intelligent and Advanced Systems, Kuala Lumpur, Malaysia, 25-28 Nov. 2007, pp.854-858. [16] K. Deb and K. Sindhya, 'Deciphering innovative principles for optimal electric brushless D.C. permanent magnet motor design,' in IEEE Congress on Evolutionary Computation, Hong Kong, China, 1-6 Jun. 2008, pp.2283-2290. [17] L. Y. Li, B. Kou, J. W. Cao and L. L. Zhang, 'Optimization design of permanent magnet synchronous motor for the electrical spindle,' in IEEE International Conference on Electrical Machines and Systems, Wuhan, China, 17-20 Oct. 2008, pp.205-207. [18] T. D. Nguyen, V. Lanfranchi, C. Doc and J. P. Vilain, 'Comparison of optimization algorithms for the design of a brushless DC machine with travel-time minimization,' in IEEE International Symposium on Advanced Electromechanical Motion Systems, Lille, France, 1-3 Jul. 2009, pp.1-6. [19] B. O. Son, Y. K. Kim and J. Lee, 'Optimization of the BLDC motor considering the fluctuation of the design variables,' in IEEE International Conference on Electrical Machines and Systems, Tokyo, Japan, 15-18 Nov. 2009, pp.1-4. [20] Z. Q. Zhu and D. Howe, 'Analytical prediction of the cogging torque in radial-field permanent magnet brushless motors,' IEEE Transactions on Magnetics, vol.28, no.2, pp.1371-1374, Mar. 1992. [21] Z. Q. Zhu and D. Howe, 'Influence of design parameters on cogging torque in permanent magnet machines,' IEEE Transactions on Energy Conversion, vol.15, no.4, pp.407-412, Dec. 2000. [22] Z. Q. Zhu, S. Ruangsinchaiwanich, and D. Howe, 'Synthesis of cogging torque in permanent magnet machines by superposition,' in IET International Conference on Power Electronics, Machines and Drives, Edinburgh, UK, 31 Mar.-2 Apr. 2004, vol.2, pp.828-833. [23] Z. Q. Zhu, S. Ruangsinchaiwanich, D. Ishak and D. Howe, “Analysis of cogging torque in brushless machines having non-uniformly distributed stator slots and stepped rotor magnets,” IEEE Transactions on Magnetics, vol.41, no.10, pp.3910-3912, Oct. 2005. [24] Z. Li, S. Z. Jiang, Z. Q. Zhu anf C. C. Chan, 'Comparison of alternate analytical models for predicting cogging torque in surface-mounted permanent magnet machines,' in IEEE Conference on Vehicle Power and Propulsion, Harbin, China, 3-5 Sep. 2008, pp.1-6. [25] M. Aydin, Q. Ronghai and T. A. Lipo, 'Cogging torque minimization technique for multiple-rotor, axial-flux, surface-mounted-PM motors: alternating magnet pole-arcs in facing rotors,' in IEEE Conference on Industry Applications, Salt Lake City, UT, USA, 12-16 Oct. 2003, vol.1, pp.555-561. [26] R. Lateb, N. Takorabet and F. Meibody-Tabar, 'Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors,' IEEE Transactions on Magnetics, vol.42, no.3, pp.442-445, Mar. 2006. [27] Y. B. Yang, X. H. Wang, R. Zhang, T. T. Ding and R. Y. Tang, 'The optimization of pole arc coefficient to reduce cogging torque in surface-mounted permanent magnet motors,' IEEE Transactions on Magnetics, vol.42, no.4, pp.1135-1138, Apr. 2006. [28] Y. B. Yang, X. H. Wang, C. Q Zhu and C. Z Huang, 'Study of magnet asymmetry for reduction of cogging torque in permanent magnet motors,' in IEEE Conference on Industrial Electronics and Applications, Xian, China, 25-27 May 2009, pp.2325-2328. [29] L. J. Wu, W. B. Jin, J. Ni and J. P. Ying, 'A cogging torque reduction method for surface mounted permanent magnet motor,' in IEEE International Conference on Electrical Machines and Systems, Seoul, Korea, 8-11 Oct. 2007, pp.769-773. [30] L. Dosiek and P. Pillay, 'Cogging torque reduction in permanent magnet machines,' IEEE Transactions on Industry Applications, vol.43, no.6, pp.1565-1571, Nov.-Dec. 2007. [31] N. N. Chen, S. L. Ho and W. N. Fu, 'Optimization of permanent magnet surface shapes of electric motors for minimization of cogging torque using FEM,' IEEE Transactions on Magnetics, vol.46, no.6, pp.2478-2481, Jun. 2010. [32] S. L. Ho, N. N. Chen and W. N. Fu, 'An optimal design method for the minimization of cogging torques of a permanent magnet motor using FEM and genetic algorithm,' IEEE Transactions on Applied Superconductivity, vol.20, no.3, pp.861-864, Jun. 2010. [33] L. Y. Hsu and M. C. Tsai, “Tooth shape optimization of brushless permanent magnet motors for reducing torque ripples,” Journal of Magnetism and Magnetic Materials, vol. 282, pp.193-197, Nov. 2004. [34] J. Y. Lee, J. H. Chang, D. H. Kang, S. I. Kim and J. P. Hong, 'Tooth shape optimization for cogging torque reduction of transverse flux rotary motor using design of experiment and response surface methodology,' IEEE Transactions on Magnetics, vol.43, no.4, pp.1817-1820, Apr. 2007. [35] Y. B. Yang, X. H. Wang, X. M. Leng, D. H. Wang and S. Y. Liu, 'Reducing cogging torque in surface-mounted permanent magnet motors by teeth notching,' in IEEE Conference on Industrial Electronics and Applications, Harbin, China, 23-25 May 2007, pp.265-268. [36] R. Somanatham and P. V. N. Prasad, 'Reduction of cogging torque of PMBLDC motor by changes in active surface area,' in IET-UK International Conference on Information and Communication Technology in Electrical Sciences, Chennai, Tamilnadu, India, 20-22 Dec. 2007, pp.414-419. [37] J. K. Xia, T. Dong, C. Y. Wang and J. Y. Zhao, 'Low speed high torque PMSM design based on unequal teeth structure,' in IEEE International Conference on Electrical Machines and Systems, Wuhan ,China, 17-20 Oct. 2008, pp.3274-3277. [38] X. T. Jiang, J. W. Xing, Y. Li and Y. P. Lu, 'Theoretical and simulation analysis of influences of stator tooth width on cogging torque of BLDC motors,' IEEE Transactions on Magnetics, vol.45, no.10, pp.4601-4604, Oct. 2009. [39] M. S. Islam, S. Mir, T. Sebastian and S. Underwood, 'Design considerations of sinusoidally excited permanent-magnet Machines for low-torque-ripple applications,' IEEE Transactions on Industry Applications, vol.41, no.4, pp.955-962, Jul.-Aug. 2005. [40] J. A. Guemes, A. M. Iraolagoitia, M. P. Donsion and J. I. Del Hoyo, 'Analysis of torque in permanent magnet synchronous motors with fractional slot windings,' in IEEE International Conference on Electrical Machines, Vilamoura, Portugal, 6-9 Sep. 2008, pp.1-4. [41] R. Islam, I. Husain, A. Fardoun and K. McLaughlin, 'Permanent-magnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction,' IEEE Transactions on Industry Applications, vol.45, no.1, pp.152-160, Jan.-Feb. 2009. [42] H. C. Feng, X. D. Wang, X. Z. Xu and Y. J. Liu, 'Optimization of asymmetric permanent magnetic synchronous motor for cogging torque minimization using finite element method,' in IEEE International Conference on Electrical Machines and Systems, Wuhan, China, 17-20 Oct. 2008, pp.3559-3563. [43] T. H. Kim, S. H. Won, K. Bong and J. Lee, “Reduction of cogging torque in flux-reversal machine by rotor teeth pairing,” IEEE Transactions on Magnetic, vol.41, no.10, pp.3964-3966, Oct. 2005. [44] D. Zarko, D. Ban and T. A. Lipo, 'Analytical solution for cogging torque in surface permanent-magnet motors using conformal mapping,' IEEE Transactions on Magnetics, vol.44, no.1, pp.52-65, Jan. 2008. [45] J. K. Kim, S. W. Joo, S. C. Hahn, J. P. Hong, D. H. Kang and D. H. Koo, 'Static characteristics of linear BLDC motor using equivalent magnetic circuit and finite element method,' IEEE Transactions on Magnetics, vol.40, no.2, pp.742-745, Mar. 2004. [46] V. Ostovic, Computer-aided Analysis of Electric Machines, New York: Prentice Hall, 1994. [47] D. C. Hanselman, Brushless permanent magnet motor design, 2nd ed. New York: McGraw-Hill, 2003. [48] C. T. Tseng, W. C. Liao, and T. C. Tang, 'MOST user's manual,' Mechanical Engineering, Taiwan, Hsinchu: National Chiao-Tung University, 1993. [49] Y. M. Chen, S. Y. Fan and W. S. Lu, 'Performance analysis of linear permanent-magnet motors with finite-element analysis,' IEEE Transactions on Magnetics, vol.44, no.3, pp.377-385, Mar. 2008. [50] 范揚鋒, '電磁鋼片之簡介,' 馬達科技研究中心電子報, vol.23, 9 Jul. 2003. [51] 洪士偉,'動力輔助型複合動力系統馬達發電機開發技術,'機械工業雜誌:智慧車輛與動力技術專輯, vol.272, pp.105, 2005. [52] F. Magnussen and C. Sadarangani, 'Winding factors and Joule losses of permanent magnet machines with concentrated windings,' in IEEE Conference on Electric Machines and Drives, Madison, Wisconsin, 1-4 Jun. 2003, vol.1, pp.333-339. [53] S. Morimoto, 'Trend of permanent magnet synchronous machines,' IEEJ Transactions on Electrical and Electronic Engineering, vol.2, no.2, pp.101-108, 22 Feb. 2007. [54] D. Pavlik, V. K. Garg, J. R. Repp and J. Weiss, 'A finite-element technique for calculating the magnet sizes and inductances of permanent-magnet machines,' IEEE Transactions on Energy Conversion, vol.3, pp.116-122, Mar. 1988. [55] N. Bianchi and S. Bolognani, 'Design techniques for reducing the cogging torque in surface-mounted PM motors,' IEEE Transactions on Industry Applications, vol.38, no.5, pp.1259-1265, Sep. 2002. [56] G. H. Jang and C. J. Lee, 'Design and control of the phase current of a brushless dc motor to eliminate cogging torque,' AIP Journal of Applied Physics, vol. 99, no.8, Apr. 2006. [57] D. H. Kim, I. H. Park, J. H. Lee and C. E. Kim, 'Optimal shape design of iron core to reduce cogging torque of IPM motor,' IEEE Transactions on Magnetics, vol. 39, no.3, pp. 1456-1459, May 2003. [58] 張崢輝, 直接驅動車輪馬達之分析與最佳化, 國立台灣大學機械工程研究所碩士論文, 2000. [59] 黃偉禎, 新式電動輪椅馬達之最佳化設計與實現, 國立台灣大學機械工程研究所碩士論文, 2004. [60] 賴俊文, '創新手輪馬達之設計與最佳化分析,' 國立台灣大學機械工程研究所碩士論文, 2006. [61] 李周翰, '手輪馬達驅動之電動輪椅的設計與製作,' 國立台灣大學機械工程研究所碩士論文, 2007. [62] 詹勛豪, '電動汽車50 kW內藏永磁式同步馬達之設計與開發,' 國立台灣大學機械工程研究所碩士論文, 2008. [63] 莊璫旭, 電動汽車直驅式軸向磁通永磁直流無刷馬達最佳化設計, 國立台灣大學機械工程研究所碩士論文, 2004. [64] CNS 14964, 電動輪椅最大速度、最大加速度及最大減速度測定. [65] 高橋義信, 輪椅之設計及規格制定研討會, 亞太科學技術協會, 2000. [66] 劉昌煥, 交流電機控制, 4th ed. 台北市: 東華書局, 2003. [67] S. Morimoto, M. Sanada and Y. Takeda, 'Effects and compensation of magnetic saturation in flux-weakening controlled permanent magnet synchronous motor drives,' IEEE Transactions on Industry Applications, vol.30, no.6, pp.1632-1637, Nov.-Dec. 1994. [68] G. Qi, J.T. Chen, Z. Q. Zhu, D. Howe, L. B. Zhou and C. L. Gu, 'Influence of skew and cross-coupling on flux-weakening performance of permanent-magnet brushless AC machines,' IEEE Transactions on Magnetics, vol.45, no.5, pp.2110-2117, May 2009. [69] T. M. Jahns, G. B. Kliman and T. W. Neumann, 'Interior permanent-magnet synchronous motors for adjustable-speed drives,' IEEE Transactions on Industry Applications, vol.IA-22, no.4, pp.738-747, Jul. 1986. [70] Y. P. Yang, Y. P. Luh, C. H. Cheung, J. P. Wang and S. W. Wu, 'Multi-objective optimal design and current waveforms control of axial-flux brushless DC wheel motors for electric vehicles,' in IEEE International Symposium on Industrial Electronics, Rio de Janeiro, Brazil, 9-12 Jun. 2003, vol.1, pp.621-626. [71] 陽毅平, 毛慧芬, 周瑞仁 and 吳志富, “手輪馬達驅動可折疊電動輪椅產品開發計畫,” 行政院國家科學委員會輔助產學合作研究計畫成果期末報告, Aug. 2010. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/46166 | - |
dc.description.abstract | 本論文之目的為開發第四代創新手輪馬達驅動之電動輪椅,此新型電動輪椅完全改變傳統電動輪椅利用高轉速的馬達搭配減速機構來驅動的方式;而以輪椅手扶圈設計成手輪馬達,直接驅動輪椅,其優點為不需要減速機構,使得空間可以有效利用,重量大幅降低。四分之一的定子與外轉子式馬達結構可以巧妙的將轉子隱藏在手扶圈之內,在手動模式時,施力半徑大;在電動模式時力矩與力矩密度高。
本論文先對電動輪椅的行駛條件作性能估測,並決定馬達的性能規格,選定適合的齒極比與繞線方式後,建立馬達磁路模型,經靈敏度分析後,利用最佳化軟體搜尋最佳尺寸,並使用有限元素分析軟體驗證,修改磁鐵與齒型設計以降低力矩漣波,調整馬達參數在不降低性能的前提下降低馬達重量,最後找出d/q軸的電感關係以求得單位電流的最大力矩輸出。 手輪馬達性能測試結果發現該設計有達到設計目標,最大輸出力矩26.8 ,最高轉速87 rpm。整車測試結果顯示在平地最高速度可達9 km/hr,在斜坡上可達4 km/hr,而在同樣的平地行駛速度下,由手輪馬達驅動的電動輪椅的電流消耗量只有市售電動輪椅的三分之一,且整車重量只有市售輪椅的五分之三,所以本創新電動輪椅具備節約能源及輕量的優點,在市場上極具競爭力。 | zh_TW |
dc.description.abstract | This thesis proposes the design of a powered wheelchair propelled by a 4th generation rim motor module. This novel powered wheelchair changes the driving structure of the traditional powered wheelchair equipped with reduction gears to one that is direct-driven by two rim motors hidden in the push rim. This design simultaneously provides the advantages of lower weight and more hand-drive space. Long torque arm is supplied in the hand-driven mode and high torque and torque density are supplied in the motor-driven mode.
First of all, determination of the torque, speed and power based on dynamic evaluation is necessary. After deciding the proper winding type and tooth/pole combination, the magnetic circuit model is constructed. The optimal values of the motor can then be set through sensitivity analysis and an optimal search method. The optimal results are then verified by the Finite Element Analysis (FEA). The magnet and tooth shapes are modified to reduce the torque ripple. Some parameters of the motor are adjusted to reduce the weight without decreasing the output performance. Finally, the d-/q-axis inductances are used to find the maximum torque per ampere (MTPA). The performance test of the rim motor shows that the design goal is achieved. The maximum torque is 26.8 and the maximum speed is 87 rpm. The road test reveals that the maximum speed is 9 km/hr on a level surface and 4 km/hr on an upward slope. Under the same speed on level ground, the powered wheelchair equipped with rim motor modules consumes only one-third the electric power of existing powered wheelchairs available on the current market and is 40 percent lighter in weight. The advantages of energy savings and light weight make this novel powered wheelchair competitive. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T04:56:19Z (GMT). No. of bitstreams: 1 ntu-99-R96522835-1.pdf: 1716068 bytes, checksum: a421142e1ac09110ba9d06547a8034d8 (MD5) Previous issue date: 2010 | en |
dc.description.tableofcontents | Contents
中文摘要 i Abstract ii Contents iv List of Tables vii List of Figures viii Nomenclature xi Chapter 1 Introduction 1 1.1 Motivation and Objective 1 1.2 Literature Review 2 1.2.1 General Wheelchair Research 2 1.2.2 Propulsion Systems for Powered Wheelchairs 2 1.2.3 Motor Design with Optimization Processes 3 1.2.4 Motor Design Based on Reduction of Cogging Torque 4 1.3 Organization of the Thesis 6 Chapter 2 Rim Motor Specification 8 2.1 Introduction 8 2.2 Power Estimation 10 2.2.1 Gravitational Force 10 2.2.2 Friction Force 11 2.2.3 Aerodynamic Drag Force 11 2.3 Driving Condition Analysis 12 2.3.1 Driving on a Level Surface 12 2.3.2 Driving on a Slope 14 2.4 Comparison 16 Chapter 3 Preliminary Design 17 3.1 Introduction 17 3.2 Design Process 17 3.3 Determination of the Winding Type 18 3.4 Determination of the Number of Teeth and Poles 19 3.5 Comparison of Different Tooth and Pole Numbers 21 3.5.1 Torque Production Analysis 22 3.5.2 Cogging Torque Analysis 23 Chapter 4 The Magnetic Circuit Model 25 4.1 Magnetic Circuit 25 4.2 PM Magnetic Circuit Model 28 4.3 Flux Linkage and Back-EMF 30 4.4 Winding Layout 31 4.5 Simplified Model 33 4.6 Magnetic Circuit Solution 35 4.6.1 Magnetomotive Force Distribution 36 4.6.2 Permeance of Air Gap and Magnets 37 4.6.3 Air Gap Flux Distribution 40 4.6.4 Back-EMF Calculation 41 4.6.5 Torque Calculation 42 4.6.6 Torque Ripple Calculation 43 4.6.7 Efficiency Calculation 43 Chapter 5 Optimal Design 46 5.1 Sensitivity Analysis 46 5.1.1 Slot Opening Width 48 5.1.2 Air Gap Length 49 5.1.3 Rotor Back Iron Inner Radius 50 5.1.4 Motor Axial Length 51 5.1.5 Magnet Width 52 5.1.6 Magnet Length 53 5.1.7 Number of Coil Turn 54 5.1.8 Input Phase Current 55 5.2 Sensitivity Index 56 5.3 Multi-Functional Optimal Design Tool 57 5.3.1 Goal Programming 57 5.3.2 Compromise Programming 58 5.3.3 Optimal Design Process 59 Chapter 6 Finite Element Analysis 62 6.1 FEA Tool 62 6.1.1 Model Construction 63 6.1.2 Material Assignment 64 6.1.3 Boundary Definition and Excited Source Setting 66 6.1.4 Solution Setup and Analysis 66 6.1.5 Field and Data Plot 66 6.2 Torque Ripple Reduction 69 6.2.1 The Arc-shaped Magnet 69 6.2.2 Stator Tooth Shoe Reshaping 70 6.3 Motor Weight Reduction 72 6.3.1 Tooth Shoe Thickness 73 6.3.2 Tooth Length 73 6.3.3 Tooth Width 73 6.3.4 Stator Back Iron Thickness 74 6.3.5 Rotor Back Iron Thickness 74 6.4 Direct- and Quadrature-Axis Inductance Analysis 77 6.4.1 Arbitrary Reference Frame 77 6.4.2 Inductance Analysis 78 6.5 Flux-Weakening Performance 82 Chapter 7 Experimental Results and Applications 87 7.1 Experimental Instrument 87 7.2 Back-EMF Experiment 92 7.3 Torque Experiment 94 7.4 System Integration [71] 95 7.4.1 Wheel Assembly ( Provided by Jun-Tian Lu ) 95 7.4.2 Road Test ( Provided by Kai-Hsiang Tu ) 96 7.4.3 Summary of the User Test ( Provided by Wan-Yin Chen ) 98 Chapter 8 Conclusion and Future Development 99 8.1 Conclusion 99 8.2 Future Development 100 Reference 102 Appendix A 110 Appendix B.1 123 Appendix B.2 124 | |
dc.language.iso | en | |
dc.title | 創新電動輪椅之手輪馬達最佳化設計與應用 | zh_TW |
dc.title | The Optimal Design and Application of Rim Motors for a Novel Powered Wheelchair | en |
dc.type | Thesis | |
dc.date.schoolyear | 98-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 劉添華(Tian-Hua Liu),楊勝明(Sheng-Ming Yang) | |
dc.subject.keyword | 電動輪椅,馬達最佳化,手輪馬達, | zh_TW |
dc.subject.keyword | Powered Wheelchair,Optimal Design of Motor,Rim Motor, | en |
dc.relation.page | 125 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2010-07-30 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-99-1.pdf 目前未授權公開取用 | 1.68 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。